I found how for the X2 but the instructions dont work for the Revolution.
Anyone know the way to stop it?
Thanks
Using root explorer goto /system/lib/libdme_main and add .bak to the end of it. You will keep bluetooth and no more update. Make sure you do NOT mess with anything else!
Sent from my VS910 4G using xda premium
I deleted that file (adding.bak sounds much better) and it has gone away, just like mtmichaelson said.
Sweet thank. Ya on my droid 2 i stopped a bunch of stuff and just did the .bak so if i need it later i can just change it back.
Thanks
Just to double check, this works on revo phone.
When I acess file it has .so file type do I change .so to bak?
I just added .bak after the .so
Sent from my VS910 4G using XDA Premium App
Revolt - LTE
I'm not sure if this is related, but I noticed that after I flashed Revolt 1.3, I never see the "LTE" symbol in my notification bar. I'm in an LTE area, so I know it's available--does that mean my phone isn't running LTE anymore or is the symbol just not showing up on this ROM? I apologize in advance if this is a ridiculously misguided question--I'm new here and learning as I go.
By the way, mtmichaelson--I said this before and I'll say it again--awesome ROM! Thanks again for your hard work.
mtmichaelson said:
Using root explorer goto /system/lib/libdme_main and add .bak to the end of it. You will keep bluetooth and no more update. Make sure you do NOT mess with anything else!
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
will this also work for the updated Revolution (2.2.2)?
Thanks in advance
ally3447 said:
will this also work for the updated Revolution (2.2.2)?
Thanks in advance
Click to expand...
Click to collapse
Yes it does
Sent from my VS910 4G using xda premium
mtmichaelson said:
Yes it does
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
So, right now it is a .so file. Do I just add .bak to it, or change it from .so to .bak?
(Just want to be extra sure.)
Also,I would like to root my phone. I found a way that someone rooted theirs with their 2.2.2. Do you think I should root first, then change the file so it doesn't update? Or does it matter?
by the way, Here is the root I found(sorry it's a bit long):
"How to root your OTA Updated Revo:
This method requires you to downgrade your phone back to the V4 stock version. As of now, there seems to be no root process for the V6 update. This method has worked for me and I am also on a custom ROM that has been said to have some, if not most of the V6 updates included without the bloatware.
Step One:
- Be sure to get the following files:
---- LG VZW_United_WHQL_v1.2.0.exe
---- LGAndroidDriver_Ver_1.0_All.exe
---- LGNPST_Store_Lab-1.zip
---- VS910.dll (required to use LGNPST_Store_Lab-1.zip)
---- VS910ZV4_04.S4_04.P58008.R5.user.tot
---- RevoToolkit-1.0.apk (This is untested by me but supposed to provide an easier method to install CWM mod vs the ADB method)
---- SuperOneClickv2.1.1-ShortFuse (Includes the needed ADB program)
---- rageagainstthecage-arm5.bin (The exploit needed to root revo, not necessarily found with SuperOneCLick)
---- RevoltRom1.3.zip (This is optional, but recommended to speed up your revo and also to comply with the original topic of this thread. It 'seems' to stop the OTA from 'trying' the update since it includes updated features. NOTE that I said 'seems'... Other things I did may be the actual result I haven't seen the OTA try to install...
Ok, so to start, you will want to be sure that you have the drivers on your computer (I'm using windows 7 x64), so that is what this method has proven to work on by me.
Be sure to install:
- LG VZW_United_WHQL_v1.2.0.exe
- LGAndroidDriver_Ver_1.0_All.exe
Both may not be required, but I have both installed and things worked.
Then you will need to install:
- LGNPST_Store_Lab-1.zip
- VS910.dll (This is just copied into the folder LGNPST/Models. My install put the LGNPST program in C:\LG Electronics, not c:\Program Files (x68)... )
- You will run the LGNPST program, select the VS910.dll via Menu: File --> Select DLL.
- Then, in the bottom right of the LGNPST program, select BIN File (folder icon) to load the 'bin'.
--- This will require you to enter *.* in order to find the .tot file. Don't worry, this .tot file is what you need in the LGNPST Program.
- Once loaded and your phone is connected and recognized (Phone must be in 'Internet USB Mode'), hit the Start Button. This will begin the process of restoring your phone back to V4.
After that has completed, which takes a while, you will then need the SuperClick program to root.
- Copy, or verify, the rageagainstthecage-arm5.bin file is located in the Exploits folder where you extraced SuperOneClick.
- Run SuperOneClick, Select the exploit pull down (which defaults to 'auto') and select the rageagainstthecage option.
- Press the Root button and let it do its thing.
--- If it fails, this is what I had to do.. Reboot your phone. While it is rebooting, have the SuperOneClick program ready and waiting for you to hit Root again. As soon as the LG Logo becomes animated, hit Root and let it try again (While it is rebooting). This seemed to get the read/write options to work, where failed. This possibly is part of the update that is sticking around to stop you from rooting. So, try a few times. If/when succeeded, move on to the next steps if you wish to have some of the update 'fixes' without the update and a faster custom ROM...
To install a ROM, you need to have CWM installed.
Two methods to doing so seem to exist:
- The method I used was at this link: [RELEASE][6-14-2011] CWM Ported to the Revolution 4G! - xda-developers
Follow that and you should have a backup original image and the new image to get CWM to work to install custom ROMs
- The OTHER method, which is UNTESTED by me, is to use a simple tool called RevoToolKit, which is and APK file that runs directly on your phone. If it works, which others seem to say it does, this would be the most simple form of installing CWM to your phone. Be aware that this app is small, but uses a downloader to install CWM, so you want to make sure you have a good internet connection or data connection...
After that, you will want to follow the directions for CWM (ClockWorkMod) at this link:
- [Rom][8-17-11]Revolt Rom 1.3 - xda-developers
After all that, you should have a rooted Revo AFTER you managed to do the update.
I included links to some instructions in order to shorten up this post and not 'copy' someone else's methods and be sure that you can give the credit to them. The only credit I deserve for this is a complete step-by-step, in one place procedure to get you back or to root your Revo if you did the update.
In time, I am sure that there will be a simpler way to root the OTA Update, but until then, this is working for me and hope that this helps clear up some issues for others that find it tough to get back to root after the OTA Update."
It then has the file links, but I cannot post them since I am a newb.
Thanks again!
I don't see a way for you to change the file from .so to .so.bak without having root as far a rooting you only have to downgrade if your phone its v6 if out is running v4 all you need to do is root it
Sent from my VS910 4G using xda premium
Is there a way to do this without buying root explorer? I have bloat freezer so is there anything I can just freeze?
Thank You
*EDIT* just bought root explorer for $.99 through Amazon Appstore for those who still need it.
I'm on V4 and rooted back from V6 but it does not let me rename due to it being a read only file? sooo how do I add the bak? opened it with root explorer and it requested superuser privileges and I ok'ed it but when I go to /system/lib/libdme_main.so and try to rename it, it won't let me.
Sleepykat said:
I'm on V4 and rooted back from V6 but it does not let me rename due to it being a read only file? sooo how do I add the bak? opened it with root explorer and it requested superuser privileges and I ok'ed it but when I go to /system/lib/libdme_main.so and try to rename it, it won't let me.
Click to expand...
Click to collapse
On the top right of root explorer is a "Mount R/W" button. Click that and it should let you make changes to the system.
Hope it helps
"Home-Less and Iconic"
Thanks a bunch . That worked! I had pushed it at the system level. Didn't pay attention that I had to do it at the folder I'm in.
Sleepykat said:
Thanks a bunch . That worked! I had pushed it at the system level. Didn't pay attention that I had to do it at the folder I'm in.
Click to expand...
Click to collapse
Glad to help.
"Home-Less and Iconic"
Related
First and foremost i want to thank esk02k and his friend for the images. All Credit goes to him for the images check out his post on xda called the thc weed leaf (i would post the link to his page but it wont let me says out side links are not allowed by new users but yet its an internal link). I didnt use all of them as there was only 37 images that i had to replace and i couldnt find the file that links to the boot up animation png files to add in the extra files so i used most of them and all i did was make it to the right size and converted them from jpg to png.
I am using the stock rom and my phone is rooted using universal androot version 1.6.2 beta5 (search for 1-click root for N1 to find this it will work on this phone) you have to install super user then you need root explorer found in the market. Now on to how to install this.
1) Install universal androot and the root explorer run universal androot to get your phone rooted you may chose soft root which only lets you temporary root till you reboot (dont worry it will not void your warrenty)
2) Download kyocera zio m6000.zip at the bottom of this post and extract it to a folder on your pc
3) Copy the folder to the root of your sd card
4) Open up root explorer and click on /data/FLEX/bootanimation
5) Copy Startup_Sound_M6000.ogg from the folder you copied to your sd card to the /data/FLEX/bootanimation folder overwriting the one in there
6) Next goto /data/FLEX/bootanimation/assets folder and copy all the png files from the folder you copied to your sd card to the assets folder over writing the ones in there
7) Exit out of root explorer and reboot your phone to see your new boot up screen and enjoy the first mod for this phone. (Note im not sure why the android screen dont show up no more when none of the files that was replaced was the android png files only the cricket png files are replaced)
Well there you have it the very first mod for this phone i hope you all like it as this is my first attempt at making a boot up screen animation im not sure how to make it animate more so please give constructive critisim do not bash it please and please tell esk02k thank you for all the hard work he did with the images all i made was the start up sound and resized the images and converted them to png to work on this phone so in all it only took me bout 7 hours his work was a ton harder and probably took him days maybe weeks. So major props to esk02k
**edit** Wow i started this by making the first mod for the phone and showed you all where to replace the stuff and got the ball rolling and not one thank you. Wow it shows me how much im appreiated here.
Everytime I try to copy the files, it says I do not have enough space. What do I need to get rid of?
muttd said:
Everytime I try to copy the files, it says I do not have enough space. What do I need to get rid of?
Click to expand...
Click to collapse
Remove some unwanted apps or apps that came on the stock rom that are worthless to you i removed the demo games that the company put on it and that gave me enough free space you need 6.50 mega bytes free to use this i made it as small as i could with out making it look like crap. you can remove some of the apps from /data/app i would recomend to back up the files before u delete them in case u have to put them back.
I have tried to copy the new pngs to the assets folder, but every time. I do, the original files replace the new ones. The closest I got was when I rebooted and I saw the first png of the original cricket boot animation, then it skipped all but the very last one of the new png I attempted to install.
Can anybody help me?
Sent from my Zio using XDA App
I am a new user of Kyocera Zio M6000. I also want to install the boot up screen for it. You describe the installation process clearly. Thank you for it.
SnakeFist said:
First and foremost i want to thank esk02k and his friend for the images. All Credit goes to him for the images check out his post on xda called the thc weed leaf (i would post the link to his page but it wont let me says out side links are not allowed by new users but yet its an internal link). I didnt use all of them as there was only 37 images that i had to replace and i couldnt find the file that links to the boot up animation png files to add in the extra files so i used most of them and all i did was make it to the right size and converted them from jpg to png.
I am using the stock rom and my phone is rooted using universal androot version 1.6.2 beta5 (search for 1-click root for N1 to find this it will work on this phone) you have to install super user then you need root explorer found in the market. Now on to how to install this.
1) Install universal androot and the root explorer run universal androot to get your phone rooted you may chose soft root which only lets you temporary root till you reboot (dont worry it will not void your warrenty)
2) Download kyocera zio m6000.zip at the bottom of this post and extract it to a folder on your pc
3) Copy the folder to the root of your sd card
4) Open up root explorer and click on /data/FLEX/bootanimation
5) Copy Startup_Sound_M6000.ogg from the folder you copied to your sd card to the /data/FLEX/bootanimation folder overwriting the one in there
6) Next goto /data/FLEX/bootanimation/assets folder and copy all the png files from the folder you copied to your sd card to the assets folder over writing the ones in there
7) Exit out of root explorer and reboot your phone to see your new boot up screen and enjoy the first mod for this phone. (Note im not sure why the android screen dont show up no more when none of the files that was replaced was the android png files only the cricket png files are replaced)
Well there you have it the very first mod for this phone i hope you all like it as this is my first attempt at making a boot up screen animation im not sure how to make it animate more so please give constructive critisim do not bash it please and please tell esk02k thank you for all the hard work he did with the images all i made was the start up sound and resized the images and converted them to png to work on this phone so in all it only took me bout 7 hours his work was a ton harder and probably took him days maybe weeks. So major props to esk02k
Click to expand...
Click to collapse
Apparently, the same number of images as the original must be used?
I tried one of my own, using boot screen found elsewhere on XDA that had more images. Didn't work.
Going to play around w/ the images today, reduce the count to the same as the original and see if that's indeed the case.
Or maybe it was the size of the images. I dunno yet.
Doesn't do a thing to my Cricket Zio.
hey i figure since your so gutsy can you get me a recovery rom my phone is crashed and cant find crap online
aago1254 said:
hey i figure since your so gutsy can you get me a recovery rom my phone is crashed and cant find crap online
Click to expand...
Click to collapse
We need a good solid backup rom, any post?
If your phone is a brick check the other zip threads for the update and you'll be on your way to a working phone
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Zip threads?
Where can I find these zip threads?
ZIO threads. Like the 2.2 in the development section
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Zip threads
Well, the 2.2 thread appears to refer to the windows downloader, with which I have two problems:
1) I don't run windows but linux, and
2) To do this, it appears I need to get into USB debug mode. I'm stuck in fastboot.
What I think I really need is the stock ROM from the Sanyo Zio. Does somebody here have this?
I can see if I can use adb to pull the 2.2 rom and if I have any luck I will let you know
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Thanks
I'd really appreciate it.
You can email me too - justin at justinholmes.com
You may want to see if you can use a windows machine to update. I think you can do a virtualbox but I'm not 100%
Sent from my from my rooted 2.2 no bloat Zio using XDA App
I'm wondering if ReactOS is far enough along to run the updater. Will have to give it a try, liveCD.
No go. Booted the live CD, couldn't access any of the media devices to access the update tool.
Hmm
but listen, I can't get the phone into USB debug mode, so how can I run the updater? At the moment I'm stuck with fastboot. Normal boot is black screen, no response of any kind, no adb.
Turn the phone off, hold volume up down and power and your phone will bopt into modem download mode. Then update.
Sent from my from my rooted 2.2 no bloat Zio using XDA App
Umm wrong thread.
Try the android 2.2 thread. Lot's more helpful info there friend
jMyles said:
but listen, I can't get the phone into USB debug mode, so how can I run the updater? At the moment I'm stuck with fastboot. Normal boot is black screen, no response of any kind, no adb.
Click to expand...
Click to collapse
Sent from my Zio using XDA App
hi guys, so as the title states, i'm new to the droid scene and i have a streak 7. i have been reading for a few days now and want to root my streak. i am unsure about how to do this, i have seen gingerbreak and superoneclick. based on the fact that i dont know crap, which would you guys recommend? i have some other issues that concern me. maybe some of those fixed would be a good start?
issues:
1. i cant seem to connect my streak to my pc, running windows vista
2. i have no idea what all these acronyms mean?
3. i dont know what ROM to use, hell i dont know what a good ROM is
4. i cant connect my streak and my iphone via wifi
maybe some one can pint me to a basic, newb users guide would be good also. if some one is willing to help me, i'd appreciate it! sorry if this is the wrong spot
hello and welcome
1) did you install the dell drivers?
2) which acronyms are you referring to?
3) rom flavor depends on your needs... streakdroid is awesome but has bluetooth issues...on the flip side......is is overclockable. Im using custom 2.2 ...I need bluetooth sadly and can't sacrifice it for an overclockable kernel.
4)you need to modify the wpa supplicant file in order to tether via adhoc ( device to device )
Steps on how are in the forum.im typing via my ds7 ....otherwise id look it up for you. Its easy to find though.
Hope that helps!!!
pyraxiate said:
1) did you install the dell drivers?
2) which acronyms are you referring to?
3) rom flavor depends on your needs... streakdroid is awesome but has bluetooth issues...on the flip side......is is overclockable. Im using custom 2.2 ...I need bluetooth sadly and can't sacrifice it for an overclockable kernel.
4)you need to modify the wpa supplicant file in order to tether via adhoc ( device to device )
Steps on how are in the forum.im typing via my ds7 ....otherwise id look it up for you. Its easy to find though.
Hope that helps!!!
Click to expand...
Click to collapse
Thanks for your reply. Here is what I found:
1. The drivers I found won't work with vista but I was directed to another method I hope works
2. All the "apk, rom, wpa" stuff like that. I mean I figured out a rom is what you use as a front end of sorts
3. I don't need overclocking, don't need speed at all as it's just going in my truck as an audio source, gps, video player, Internet thing.
4. I'll use your post to search this method out. Might need some help. I'm assuming I need to have the devise rooted first?
On a rooting note, what's the best, easiest method for a newb such as myself? I am on 2.2.2 and it's a t-mobile streak 7.
Again thanks for your help.
With 2.2.2 use gingerbreak. Its one button and your rooted.
Sent from my Dell Streak 7 using XDA Premium App
csheppard93 said:
With 2.2.2 use gingerbreak. Its one button and your rooted.
Sent from my Dell Streak 7 using XDA Premium App
Click to expand...
Click to collapse
Does it require connecting to a pc? Or can I download gingerbreak and install it on an sd card? Better yet do you know of a link to a tutorial or thread? I'm on my phone now and won't be around a computer till late Sunday.
waxworkz said:
Does it require connecting to a pc? Or can I download gingerbreak and install it on an sd card? Better yet do you know of a link to a tutorial or thread? I'm on my phone now and won't be around a computer till late Sunday.
Click to expand...
Click to collapse
It does not require connecting to a PC. Here is the link to the tutorial; http://forum.xda-developers.com/showpost.php?p=13900137&postcount=1
rsfinsrq said:
It does not require connecting to a PC. Here is the link to the tutorial; http://forum.xda-developers.com/showpost.php?p=13900137&postcount=1
Click to expand...
Click to collapse
Thank you, I shall try that and hopefully not brick my streak.
As far as installing a ROM, any other ideas, advice, links? I like to read as much as possible to be well informed before I do anything.
If you like honeycomb android 3.2 you might wanna us honeystreak hd7 but it isn't the easiest to put on ur streak and u need a computer for this rom
Sent from my Droid using XDA Premium App
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
shadowdrag96 said:
If you like honeycomb android 3.2 you might wanna us honeystreak hd7 but it isn't the easiest to put on ur streak and u need a computer for this rom
Sent from my Droid using XDA Premium App
Click to expand...
Click to collapse
Thank you. Seems as I'll be home later tonight so I'll be able to try and at least root the streak tonight. I hope it goes well.
ok so i rooted my streak 7 tonight. wasnt so bad i used gingerbreak.
now i need to modify the supplicant file in order to tether my iphone to my streak via wifi. i found all the info and the files, but i dont know how to "flash the zip in recovery" i read through some 16 pages and still cant figure it out. can any one point me to a step by step on how to apply the patch? or just write it out step by step? i am getting the hang of this stuff but i dont know enough and dont want to mess up my streak and not be able to use it all via wifi.
thank you again guys, you are a big help to a newb
ok i think i figured out how to do it:
1: changed zip file name to update.zip
2. moved to sd card
3. opened up clockwork recovery
4. ran rom up date of said zip file
5. asked to make back up
6. rebooted in recovery mode
7. dont know if it worked??
8. still wont see my iphone using mywi for tethering
again any help would be great guys. thanks
wpa fix
waxworkz said:
ok i think i figured out how to do it:
1: changed zip file name to update.zip
2. moved to sd card
3. opened up clockwork recovery
4. ran rom up date of said zip file
5. asked to make back up
6. rebooted in recovery mode
7. dont know if it worked??
8. still wont see my iphone using mywi for tethering
again any help would be great guys. thanks
Click to expand...
Click to collapse
You don't need to do any of that....
http://forum.xda-developers.com/showthread.php?t=970219
You are rooted. All you have to do is use any file explorer which allows writing to root and copy this file to /system/ bin (back up your old one by renaming it to wpa_supplicant.old first. Restart wifi by going into settings and uncheck / recheck the box. You can now tether
The file is a zip. Extract the wpa_supplicant file from it and copy......not the whole zip itself...just the extracted file
pyraxiate said:
You don't need to do any of that....
http://forum.xda-developers.com/showthread.php?t=970219
You are rooted. All you have to do is use any file explorer which allows writing to root and copy this file to /system/ bin (back up your old one by renaming it to wpa_supplicant.old first. Restart wifi by going into settings and uncheck / recheck the box. You can now tether
The file is a zip. Extract the wpa_supplicant file from it and copy......not the whole zip itself...just the extracted file
Click to expand...
Click to collapse
Wow and I thought about copying the files. But I kept reading about "running" a patch, so I thought I had to let the script do something. Thank you very much for your link! I will try it hopefully tonight when I get home from working.
ok i am trying what you posted pyraxiate, but i cant seems to rename the files? i have tried both es file explorer and android file explorer.
ok i dont think my root went through. i re-read that the gingerbreak has to be on the devise and i had it on the sd card. problem is i cant get the gingerbreak apk to the eternal memory of the devise. my computer is only 32 bit and the adb files wont work on 32 bit, only 64 bit. so it seems i am stuck until i find a computer with an OS other than vista! damn it, unless some one has solution guess i am stuck unrooted for now
Do yourself a favor and use the super1click via tether to a laptop. Its easy. Install the drivers they give. Also I bought root explorer. Well worth it!
Also you can use the xp32 bit driver. It worked for me.
http://forum.xda-developers.com/showthread.php?t=939921
That's how I did mine
If you have the gingerbreak.apk on the SD card use a file manager and install it. Then open in in the app drawer and click root. The device will reboot if it worked. Might take a few minutes and look like it froze.
Sent from my Synergy Rom
Thing is I emailed it to myself and it still saved it to the sd card part, even though I removed my sd card?? I did the gingerbreak and it did reboot, I also did the clockwork recovery. I still don't know if it worked? Seems as though I try and rename the wpa files and I'm not allowed, does this mean that it isn't rooted?
waxworkz said:
Thing is I emailed it to myself and it still saved it to the sd card part, even though I removed my sd card?? I did the gingerbreak and it did reboot, I also did the clockwork recovery. I still don't know if it worked? Seems as though I try and rename the wpa files and I'm not allowed, does this mean that it isn't rooted?
Click to expand...
Click to collapse
I know es file explorer wont work for root. You need a root file explorer. Also, it would be a good idea to download a rom ( either streakdroid or custom 2.2.2), put it on the internal storage, and try booting into cwr to flash it. You boot cwr by powering the streak off first. Hold volume up in and push / hold power. You will get a recovery boot menu. From there choose update from zip ( this is where cwr is) and cwr should boot. From there follow guides to wipe data / cache / delvik and then go to install a file from zip. Choose the rom zip ...sit back...and relax as it flashes to a fully rooted rom
Hope that helps!!
Is it possible to unroot after using the 1 Click Root? I'm coming from a rooted Droid Eris and I remember the first few people who rooted their Erises had lots of problems and I just wanna make sure we can go back and re-root if a better root process comes along later on...
magicelf said:
Is it possible to unroot after using the 1 Click Root? I'm coming from a rooted Droid Eris and I remember the first few people who rooted their Erises had lots of problems and I just wanna make sure we can go back and re-root if a better root process comes along later on...
Click to expand...
Click to collapse
Yes, but you'd have to do it manually at this point.
You'd delete busybox and su, uninstall superuser.apk, and there may be a symlink you need to undo, but I think the latest one-click cleans that up. I'd have to go back and check.
And any bloat you froze needs to be unfrozen, or bloat removed needs to be restored.
Okay, first version of this tool, be kind and let me know if there are any problems with it.
Also: NO GUARANTEES. If it does something that breaks your phone, I am not liable. Use at your own risk. Etc., etc.
http://www.psouza4.com/Droid3/PetesMotorolaRootTools_v1.03.zip
UPDATE 9/1/2011: version 1.03
I'm trying the one touch unroot and keep getting an error about the /sdcard/d3unroot folder missing files.
I extracted all of the APKs from your link to my /sdcard/d3unroot directory, but for some reason one touch unroot will not work.
The root worked great
same error here...
Get that error as well
Same here.
Why does it even need that to un-root @ that point?
I'm getting the same error.
Is it really a one-click method?
I'm a dummy so I think I'm gonna wait for some clarity.
Thanks for doing this, man!
Fully re-written and should un-root and restore /system/app for both v5.5.959 and v5.6.890. Enjoy!
http://www.psouza4.com/Droid3/PetesMotorolaRootTools_v1.03.zip
This program is for Windows only and can:
root your device (most Motorola Gingerbread devices)
unroot your device
restore your /system/app, even if you deleted files
And a bit more, such as un-freezing apps if you un-root just like Titanium Backup can.
So how do I do this. Is it the same as the one click root meaning unzip the file and put my phone into charging mode and let it do its thing
Sent from my DROID3 using XDA App
spacecasespiff said:
So how do I do this. Is it the same as the one click root meaning unzip the file and put my phone into charging mode and let it do its thing
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Pretty much -- this is an all-in-one. It'll tell you where to download files and where to put them when you begin.
I guess I'm just retarded I can't get this to work. I give up. Looks like I'm gonna have to get VZ to mail me a new D3
Yonnor said:
I guess I'm just retarded I can't get this to work. I give up. Looks like I'm gonna have to get VZ to mail me a new D3
Click to expand...
Click to collapse
Why can't you? More than willing to help, but have to tell me what the problem is. And bear in mind that I put out a new version less than 2 hours ago that fixes a LOT (it's a full rewrite).
ok ive downloaded the file to my computer.
Keep getting the error for the Restore data not being in the right place. I've extracted the files to the right spot (I think)
is the restore folder supposed to be located in the Root Tools folder, and then all the apk's placed that Restore folder?
Yonnor said:
Keep getting the error for the Restore data not being in the right place. I've extracted the files to the right spot (I think)
is the restore folder supposed to be located in the Root Tools folder, and then all the apk's placed that Restore folder?
Click to expand...
Click to collapse
Basically, yes.
I'll use your desktop as an example, so if you have:
Desktop\New Folder\Pete's Motorola Root Tools.exe
Then you'll want to extract all the files for the /system/app fix to:
Desktop\New Folder\restore
So that you have:
Desktop\New Folder\restore\AccountAndSyncSettings.apk
Desktop\New Folder\restore\AccountAndSyncSettings.odex
Desktop\New Folder\restore\AdminFeedNotifier.apk
etc.
This assumes you are using my new version 1.03.
psouza4 said:
Basically, yes.
I'll use your desktop as an example, so if you have:
Desktop\New Folder\Pete's Motorola Root Tools.exe
Then you'll want to extract all the files for the /system/app fix to:
Desktop\New Folder\restore
So that you have:
Desktop\New Folder\restore\AccountAndSyncSettings.apk
Desktop\New Folder\restore\AccountAndSyncSettings.odex
Desktop\New Folder\restore\AdminFeedNotifier.apk
etc.
This assumes you are using my new version 1.03.
Click to expand...
Click to collapse
Ok thank you, I'll give this a shot again.
EDIT: I have it set up as:
Desktop/PetesMotorolaRootTools_v1.03/restore/(all the apk's)
And I'm still getting the:
ERROR: /restore/ backup doesn't exist or is incomplete! etc etc
ok i just unrooted and all is good now im rooting agian. so thank you for this on click unroot meathod. its good to know that if i want to unroot i can. You should put this on every forum that you can. I will aslo tell people about it. You did a good thing for the people on this one. I think a lot of new people will whant to root now that they have a way to undo it.
Lol well like 8th try and I got it to work. Sorry for pestering you so much.
My Droid 3 is rooted and I received the OTA notification. It downloads fine, reboots the phone, and begins to update. About 1/3 the way to update, the Android turns into an Exclamation point and reboots. Once back to home screen I get an Update Failed error.
Here is what I did so far:
-Defrosted all apps then rebooted
-Restored all system apps with Pete's One Click Root
-Pulled Battery for 5 min
-Factory Reset Phone
After each of these steps I tried to install the update and same thing. Will not get past 1/3. Any suggestions?
u need to rsd the swu.zip in order to get the update
OK, where can I get the swu.zip?
lacesout said:
OK, where can I get the swu.zip?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1255198
here u will find it along with rsdlite n adb fastboot. (make sure U read all that b4 U do it)
mrcastillo said:
http://forum.xda-developers.com/showthread.php?t=1255198
here u will find it along with rsdlite n adb fastboot. (make sure U read all that b4 U do it)
Click to expand...
Click to collapse
Thank you, this work!
lacesout said:
My Droid 3 is rooted and I received the OTA notification. It downloads fine, reboots the phone, and begins to update. About 1/3 the way to update, the Android turns into an Exclamation point and reboots. Once back to home screen I get an Update Failed error.
Here is what I did so far:
-Defrosted all apps then rebooted
-Restored all system apps with Pete's One Click Root
-Pulled Battery for 5 min
-Factory Reset Phone
After each of these steps I tried to install the update and same thing. Will not get past 1/3. Any suggestions?
Click to expand...
Click to collapse
lacesout, had the same experience. Used one-click method to root, then used psouza4's bloat script to remove, then restore apps when the update became available. These were my only mods. Went to /system/app and all app's are back with the proper apk extension. Update downloads fine, then hangs at 1/4 to 1/3 of install. Anyone else with similar experience or thoughts as to what's hanging the OTA install?
If you used the script to re-bloat the system, use root explorer and double check all the ".bak"s were removed. I don't remember which one, but I remember there was a file or two the script skipped over.
Also, if you did a nandroid before debloating, you can restore it, then go get the update. (The second option is what worked for me).
Sent from my DROID3 using XDA App
nu2droid said:
If you used the script to re-bloat the system, use root explorer and double check all the ".bak"s were removed. I don't remember which one, but I remember there was a file or two the script skipped over.
Also, if you did a nandroid before debloating, you can restore it, then go get the update. (The second option is what worked for me).
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Thanks for the reply and the tip on root explorer, it's an elegant tool, more intuitive to use than the freeware apps.
All the file extensions in /system/app are either .apk or .odex with the exception of Fota.apk.bak, and Fota.odex.bak. As the first time I heard of nandroid was your post, I unfortunately didn't use it, so I don't know if these were the extensions before I used psouza's bloat removal script. Fota was not on the list of scripts to remove/rename in his original post.
As Fota is the "firmware over the air" app, it is suspicious that it's the only one with a .bak ext. I am using root explorer to rename both, removing the .bak, and then will attempt another update.
Success! "Your phone has been upgraded to 5.6.890.en US version". Have lost root, at least for the moment. Will deal with that tomorrow. Last thing to do before going to bed is find the "Thanks" button. Thanks for setting me on the right path. P.
Unable to root after OTA to .890
One click root not longer works. After clicking "run_to_root_your_droid3.sh" on PC (Ubuntu 10.04) I get no prompts on screen, but phone does reboot twice. No su privileges after boot. Busybox is installed in /system/xbin and there is nothing I can do about it as I can't mount r/w. Using Root Explorer and Script Manager as tools.
I realize I'm going to have to increase my learning curve here. Would appreciate any links to relative threads on this topic, or suggestions on what to try next (I have searched, but need some direction).
Fellas, I come to here, humble and contribed. I, as all others, have the dreaded gps bug. I know there are a few posts concerning it, however, those are starting to get confusing to me. I ask for some simple instructions as to simply root my device, and procedure to replacing the files that are to make it functional again. No debloating, flashing of ROMs, or etc. DL links would be nice too.
Phone specs:
At&t n900a
4.3 stock
baseband n900aucubnb4
build number jss15j.n900aucubnb4
Have rooted other samsung devices, so not totally an idiot...
Any help will be much appreciated
Kingo
Sent from my SAMSUNG-SM-N900A using Tapatalk
zinupe14 said:
Kingo
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
As well as other posts to many threads here, someone posts partial answers, or simply something they read. Thanks . People wonder why they brick their devices....SMH
You asked how to root p. Kingo app is as simple as it gets. And it doesn't trip your Knox counter. If you want 4.4.2 then I would suggest downloading the urdroid rom and following the detailed instructions. I'm running the stock kitkat rom rooted with no Knox counter trip. Not trying to be a prick but the kingo root method was as simple as pi
Sent from my SAMSUNG-SM-N900A using Tapatalk
I'm not interested in kitkat, honestly, I dont care about custom ROMs. I just need to root, and the procedure for replacing the gps files that are to make the AT&T GN3 gps actually work. And possibly stop the updates.
if you're on the latest nb4 baseband than you'll need to google Kingo v.1.15 and find a download of that version. if you're still on mj5 than just google kingo app, download and install to a windows pc. open the app and follow the instructions. its easy. kingo should install the correct drivers. kingo doesn't always succeed the first time. if that's the case try again until kingo says success. once done update su superuser app via google play and restart your phone. now you have root. i don't have gps problems so hopefully someone else can help you with. good luck. sry i can't post any download links but if you use google you should have no problems
Honestly I'd just wait if I were you....
Rogers and tellus note 3 have gotten kitkat the s4 has gotten kitkat for att in looking for kitkat in the next few weeks to month.
Sent from my XT907 using xda app-developers app
Would some explain how to "flash" the gps files to fix the friggen thing. I have root with kingo, and downloaded the gpsfix from drakeymcmb, but 2 folders are extracted and only one is told what to do with, as well as how to change permissions for the files...thanks in advance
crazysgt said:
Would some explain how to "flash" the gps files to fix the friggen thing. I have root with kingo, and downloaded the gpsfix rom drakeymcmb, but 2 folders are extracted and only one is told what to do with, as well as how to change permissions for the files...thanks in advance
Click to expand...
Click to collapse
Ignore the meta folder. You're not "flashing" these files, you're copying them to your phone's system folder. Open the zip and open the system folder, then open the etc folder. Now copy the gps.conf file to your phone's system/etc directory. Now go back to the gpsfix.zip and open system then open lib. Copy the 3 libloc files to your phone's system/lib directory. Go back to the zip. Open system, open lib, open hw. Now copy the 2 GPS files to the phones system/lib/hw directory. Change each files properties to rw-r-r(Fix permissions). Now reboot. Warning if you don't know what you are doing i don't recommend doing this as messing with system files can lead to very expensive paperweight
The Basilisk said:
Ignore the meta folder. You're not "flashing" these files, you're copying them to your phone's system folder. Open the zip and open the system folder, then open the etc folder. Now copy the gps.conf file to your phone's system/etc directory. Now go back to the gpsfix.zip and open system then open lib. Copy the 3 libloc files to your phone's system/lib directory. Go back to the zip. Open system, open lib, open hw. Now copy the 2 GPS files to the phones system/lib/hw directory. Change each files properties to rw-r-r(Fix permissions). Now reboot. Warning if you don't know what you are doing i don't recommend doing this as messing with system files can lead to very expensive paperweight
Click to expand...
Click to collapse
Thanks! This is what I needed, I understand the risks, but also know the reward is a functioning gps, the meta folder and how to change the permissions is what was holding me back.
So on permissions, just rw, r,r no execute on any right? Now how to disable att updates? Thank goodness for yall smart fellas
crazysgt said:
So on permissions, just rw, r,r no execute on any right? Now how to disable att updates? Thank goodness for yall smart fellas
Click to expand...
Click to collapse
Sry for the late reply. Owner=read write, group=read, other=read. No execute
To disable AT&T updates, freeze the at&t update app. (Sorry, I can't get the name right now, I'm on a ROM that had it removed, but it's at&t <something to do with updates>, with little red and green lines on the icon.) Link2SD or TiB will freeze it.
One more quick ?, When I open Super SU, a popup appears, Samsung KNOX has been detected. This might limit root capabilities and cause annoying popups. Try to disable KNOX? I have always cancelled the popup. Is that correct? or should I ok it? Again, thanks guys for all the help. I used my gps without fail all weekend long. Not a single problem, gps or phone wise. Wonder if I was to unroot using Kingo app, and leave the gps patch alone, if it would still get OTA?