So, basically out of no where my computer finally detects my phone, run adb into download mode and odin cant seem to detect it, when the phone is on, odin detects it on com 8 but when i put it into download mode it doesnt work :/
^ Maybe reboot the computer then try...also, try another usb cable or different usb port ??
Are you making sure that you are in download mode and Odin is up before you plug in the phone? Also, there are some other alternatives you can check out if Odin just isn't cutting it (I'm thinking heimdall).
Related
trying to go from COG to PER
and am trying to go to stock using ODIN 1 click from http://www.youtube.com/watch?v=UDtxnH4lFuk to go to 2.1 stock...
i instaled the X64 drivers, the ODIN does work at first, and the adb comands work
first when i'm in debug mode and phone is one, i plug it, odin recognize it and is yellow.
then i do "adb reboot download" the phone goes to download mode, odin adds it then removes then adds again and removes
what to do?
iakovl said:
trying to go from COG to PER
and am trying to go to stock using ODIN 1 click from http://www.youtube.com/watch?v=UDtxnH4lFuk to go to 2.1 stock...
i instaled the X64 drivers, the ODIN does work at first, and the adb comands work
first when i'm in debug mode and phone is one, i plug it, odin recognize it and is yellow.
then i do "adb reboot download" the phone goes to download mode, odin adds it then removes then adds again and removes
what to do?
Click to expand...
Click to collapse
Layer 1 first. Try a different USB port, try a different USB cable.
switched cable switched port
now it "add remove" on normal connect but when in download mode it looks stable
worry that if i start the ODIN it will brick the phone it if"add remove" itself agin
and i was right... add remove again on ID 5 in download mode
the thing i dont get is that in storge mode it works fine... backuped right now 1.4G of data without problem
Hi,
Every time i try to connect my "download mode" phone the odin didn't display yellow color in ID:COM so i can't flash CF-ROOT or SpeedMod Kernel at all , can any one tell me why? i already have kies recognize my sgs and i'm not XXJPY.
Thanks in advanced..
Is your phone in download mode when you connect it? If not, try to put it in download mode first and then connect it to your computer.
Also, try restarting both the phone and Odin and take care to connect the phone AFTER you have started Odin.
Yes I put my phone in Download Mode already.. I started Odin and then connect my phone to USB but still seem Odin not recognized my phone as the "Yellow text highligh" didn't appear in ID:COM box at all. it's only recognized when i put my phone in MTP application to connect to the kies..
I'd try another USB slot...
Yes, I did change the slot and now Odin recognized my phone.. But i flash CF-Root-XX_OXA_JPU-v1.3-BusyBox-1.17.1
for my SGS but it's failed..
My Phone detail is PCode:GT-I9000HKDDBT,
PDA:I9000XXJPY
PHONE:I9000XXJPY
CSC:I9000XAJPY
Can u recommend me which CF-Root file name should i use??
Thanks
looks to me like your using the wrong cf root.. your on JPY right ?? but using JPU cf root.
try this one.
You should always use the CF-Root that's "compatible" with your firmware. In your case, that would be the one that contains "JPY" somewhere in it's name.
Cos some1 in the forum gave me that link,...
Okay will try to flash with the JPY one
then will tell the result..
same problem
I've changed all the usb sockets ,and the same problem.
If i'm in normal mode , the Odin recognises me , but when i'll go in to download mode , it's ghost town .. it doesn't sees me. Why?
try to reboot phone/pc maybe you could reinstall the drivers... make sure you are using the original usb cable
u dont have the drivers installed
Hello,
I have been using some release candidates of ICS which were available here on my i9000. Everything worked out generally fine. Sometimes my phone crashed and then it wouldn't want to go further than my i9000 and afterwards the google screen. Both screens would just repeat endlessly without the phone doing anything.
When this happened, I was always able to go back to recovery mode and uninstall everything and reinstall the rom. This would always solve my problem.
Now here is my current issue: on Saturday my phone crashed again, but now I can NOT enter recovery mode any more. Whenever I plug in a usb cable or normal cable to charge my phone it shows the calculating sign and after a few secs it's gone and starts all over again instead of showing the green battery slowly getting full.
The only thing which works is getting into download mode. So I tried to get odin to work. I installed kies to get the usb drivers and I opened odin (on both windows and a mac), but it does NOTHING.
Is there any other way I can reset my phone to get it somehow working again? Is there another way to get into recovery besides the buttons or using odin? I know of ADB but that requires the phone to be on....
When you plug your phone in (and enter download mode) what device type does windows detect it as?
Because you can get to download mode normally a "good" sign that it isn't bricked (and even when "bricked" it can be un-bricked)
Edit
Just tested mine, entered download mode and odin shows it connected on Com6, device manager shows it connected as a "Samsung Mobile Modem"
try and install the samsung modem drivers separately then try and connect connect
Hi,
first, be sure that all Kies-services are disabled via Taskmanager otherwise ODIN wont work correct!
then Bring your SGS1 to the Downloadmode, connect the USB_cable at the phone.
fullfill all sections you need in ODIN (PDA-Kernle, CODE-modem, CSC-CSC, pitfile512) klick repartition on
then connect your SGS1 via USB to the PC
Odin will show "connected"
Press start.
http://www.youtube.com/watch?v=1RoZU5ZPMS4
if your still stuck checkout this video might help good luck
Hello guys,
as I wanted to delete unnecessary blow apps I think I deleted some important System app that is responsible for connecting to a PC. Now the S5 mini behaves as I it is connected to a battery charger when it is connected to a PC, there is no sign that it is recognized by the PC. I allready tried to Flash recovery with Odin but it isnt recognized by Odin too (in download mode). Am I doing something wrong? Can someone help me PLEASE get my phone working again and flash some custom ROM? Thanks in advance!!!
Try to install kies drivers for your smartphone and retry on odin. I think the only problem is the missing of the drivers
No, Kies is installed and it has no effect. Neither Kies nor the Computer recognize the phone, even on the phone theres no sign it is connected to the PC except the battery loading sign.
Try To find the drivers on google and install them. Do you have a custom recovery? If yes you can flash a custom rom
Download mode isn't related to kernel nor recovery, so unless you somehow wiped all phone's memory (all partitions) you'll still have download mode. So if you can enter Samsung's download mode and your computer doesn't recognize the phone it's one of them:
1. Bad cable, some USB cables only charge, no data connection;
2. Bad USB port on either phone or computer, try and different computer.
Good luck.
Just like the title says my GT-S5570 is not getting detected by PC(Odin) in download mode
but Odin detects it in ramdump mode.
the problem is that device is locked and i cant boot into recovery mode(bootloop)
so want to flash stock (2.2.1)firmware to restore phone
help...pls...someone...anyone....
what could you try:
take out battery for 7 seconds,
connect to a different USB port,
a different PC,
a different ODIN version,
try Samsung KIES instead,
use different USB cable …
chorknabe1 said:
what could you try:
take out battery for 7 seconds,
connect to a different USB port,
a different PC,
a different ODIN version,
try Samsung KIES instead,
use different USB cable …
Click to expand...
Click to collapse
tried everything kies just gives random errors and odin is just stuck at setup connection is there any way i can install twrp throug adb and try from there