Galaxy S "die" during the day - Galaxy S I9000 Q&A, Help & Troubleshooting

I have a Galaxy S currently on Gingerbread 2.3.4, a Samsung ROM that I found on a forum, loaded with Odin.
It's version: I9000XXJVP
Kernel; 2.6.35.7-I9000XXJVP-CL264642 [email protected] #2
Build: GINGERBREAD.XXJVP
I usually load many software and games on my phones, and the suspect is that is always something of these that bring problems, not the Operating System Itself. Maybe some software in nor written very well.
So the problem is that the phone sometimes "die" during the day.
I took it out of my pocket, it should be in standby, but when I press the home button or the on/off button on the side, nothing happens, it remains black.
The only way to have it working again is take the battery out and restart.
It is not a "low battery" problem, and it seems not to be related to some specific software that I use or have used during the day. This lock don't happen every day, and sometime happens even if I have not used any software (just Gmail, phone, or other "stock" functions)
I had other problems with this Firmware, sometime loosing memory or becoming slow, and a good solution I found was to schedule a complete restart every morning at 6:00. I still have this reset running, and it seems a good thing. But even this cannot be related with this "lock" problem.
What do you think ?
Thank you
Ser

I'd reflash the rom again bud to see if it is a firmware issue
Sent from my GT-I9000 using XDA Premium App

Try flashing latest version of gingerbread XXJVR.The firmware that ur using has this bug and even when i was using XXJVP,i use to get this problem.So get the XXJVR firmware from ramad thread and flash it
Sent from my GT-I9000 using XDA App

Thanks Androiderrr.
Please give me a link to this "Ramad thread" where I can get the JVR.
I think I should load with Odin ?
Another question, if you can help:
when I change firmware it seems to me that the (5,7 Gb) internal memory is not cleaned, right ? I always find pieces of soft installed in previous rom....
Which is the best way to "start clean" when upgrading firmware?
Thanks !

Ok iam providing you link.Download stock XXJVR.When u will unzip it,you will find 3 files(PDA,PHONE,CSC).Now while flashing throug odin just replace CSC file of XXJVR with any CSC file of other gingerbread ROM.Like you can use CSC file of XXJVP.It is beacuse XXJVR was released for swisscom oprator and if u will use CSC file of original XXJVR then you will get custom swisscom boot animatiln
Sent from my GT-I9000 using XDA App

forum.xda-developers.com/showthread.php?t=1226138

Now comming to ur question of fresh flashing.All you can do is take following steps
1)First backup ur apps.Use my backup(root) from market.If ur not rooted then use my backup(it comes with 30days trail and donot require root permission).Also backup ur music,videos and important files from internal memory to pc
2)Now take out ur sim card and external sd card.
3)Now hard reset ur phone by dialing *2767*3855#
3)After this reboot into revovery(switch off ur phone and press volume up+home key+power switch).Now do factory reset and clear dalvic cache.Reboot
4)Now flash ROM using Odin.Remember when ur using 3 files to flash like (pda,phone and csc) then always use .pit files(512)
5)After flashing again,reboot into recovery and do factory reset and clear dalvic cache
Enjoy
Sent from my GT-I9000 using XDA App

And before inserting external sd card,check for virus.
Sent from my GT-I9000 using XDA App

Related

[Q] Bought second hand sgs and it has 2.2...

Hi all,
I bought a second hand SGS and it has 2.2 froyo
How can i put it back to normal 2.1 android please?
i dont want root or anything...
can any1 help? ill put a few quid in your paypal if you can take the time to guide me through it?
Well, you could always just goto settings and initiate a factory reset... You'll lose root and revert back to the stock eclair 2.1 ROM.
where is that option?
i found sd card and phone storage and
internal sd card format option
i notice another option in privacy that says factory data reset. but that looks like it might be just personal data reset not full reset thingy,
if what your saying works i will be very happy!
Prasad007 said:
Well, you could always just goto settings and initiate a factory reset... You'll lose root and revert back to the stock eclair 2.1 ROM.
Click to expand...
Click to collapse
Think about this for a second....a factory reset is somehow magically going to pull stock 2.1 out of .....where exactly?
the OP is going to have to Odin back to stock....plenty of info here on how to do this....
what is Odin?
the search functions are down at the moment so i cant search the forums
Maybe you can help mate? please!
Its laggying badly this 2.2
masterotaku said:
Think about this for a second....a factory reset is somehow magically going to pull stock 2.1 out of .....where exactly?
the OP is going to have to Odin back to stock....plenty of info here on how to do this....
Click to expand...
Click to collapse
Why else would it be called FACTORY reset ? It would be the firmware provided with the phone, which would be eclair as opposed to the froyo build he received on a rooted second hand phone.
The option is in settings-> privacy-> factory data reset
You can't get Froyo without flash to a froyo ' factory' firmware. In this case, A beta firmware. Whenever you flash to a new firmware, you lost your old firmware completely.
Sent from my SAMSUNG-SGH-I897 using XDA App
yeah i guessed it wouldnt be that simple.
guys can you give me a clue?
im thinking this: see if im anywhere near.
download odin
connect phone to pc
restart holding the volume down, power and home
flash with original files - im having trouble finding these
will my samsung be 2.1 and non rooted after that?
will i be able to re-root if i need to? ie to apply lagfix
vinny1684 said:
yeah i guessed it wouldnt be that simple.
guys can you give me a clue?
im thinking this: see if im anywhere near.
download odin
connect phone to pc
restart holding the volume down, power and home
flash with original files - im having trouble finding these
will my samsung be 2.1 and non rooted after that?
will i be able to re-root if i need to? ie to apply lagfix
Click to expand...
Click to collapse
1. Download odin,
2. Download the needed firmware files from Samsung firmwares,
3. Phone off. Vol down, menu, power
4. Add pit512/513 (can't remember which), pda, modem, csc in odin
5. Tick re-partition
6. Connect phone to pc
7. Click start and wait for your phone to restart
All done, This is just a quick and rough guide how to do it, there's a much better guide on this forum what to do and how
do you kno where the firmware files are exactly? i cant search the forums for the guide.. search function is down.
A quick look and you'll find 'forum.xda-developers.com/showthread.php?t=723596'
For firmwares, a quick Google 'samfirmware' you'll need to sign up to access the files in the firmware section That's if there not in the above link
the first one you must to do is download the firmware file through the internet,
then download the drives and odin and pit512 file,
and then install the drives ,then run the odin,select the re-partition,in pit,select the pit512,in pda,select the firmware which named with pda,in modem and csc is also select the firmware named with modem and csc,
shut down your phone then press vol- ,home ,power at the same time,you will see a android ,
connect your phone with the pc,
when the com is turn green ,press start.and wait..after you flash the firmware,you should format the sdcard and wipe your data..
thanks guys
i think ive sorted it, but still seem rooted somehow
is this the right firmware?
2.1-update1
basedband version I9000XXJM4
Kernel version
[email protected]#
Build number
ECLAIR.XWJM8
If thats all good! then thanks very much guys.. but root still looks iffy to me.
will this stop me from receiving updates from samsung? ie propper froyo when its out.
damn i just read that i think i should have used the 803pit and not the 512. is that right?
vinny1684 said:
damn i just read that i think i should have used the 803pit and not the 512. is that right?
Click to expand...
Click to collapse
if you are trying to flash the leaked BETA froyo from Korea, yes you need the 803 pit
foxbat121 said:
You can't get Froyo without flash to a froyo ' factory' firmware. In this case, A beta firmware. Whenever you flash to a new firmware, you lost your old firmware completely.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I didn't know that... Thanks!
vinny1684 said:
do you kno where the firmware files are exactly? i cant search the forums for the guide.. search function is down.
Click to expand...
Click to collapse
You can get the firmware here http://www.samfirmware.com/home.htm
Depending on what country you are in, there are diferent firmwares.
Download odin from that page aswell.
They also have a how to guide on how to flash with odin.
From my understanding you won't be getting Froyo OTA, you will be getting it via KIES. But with all the modding going on I doubt KIES will let you so you like everyone else here will have to get it installed via ODIN, no big deal at all . Just check back xda when froyo is in news for sgs
ickyboo said:
From my understanding you won't be getting Froyo OTA, you will be getting it via KIES. But with all the modding going on I doubt KIES will let you so you like everyone else here will have to get it installed via ODIN, no big deal at all . Just check back xda when froyo is in news for sgs
Click to expand...
Click to collapse
Will this also be applicable to me ? I have only rooted my phone. It's unrooted now... And I've not deviated from the stock firmware.
I advice you to check if the 3 Button Combo works on your Phone. If not, apply the 3 Button SBL Fix before messing with ROMs to help recover the device in case of a brick.

HELP!! how to get back to original software?

Help, i need this REALLY fast.
My friend got a sgs, and i flashed a new kernel (backed up the original one) and a new rom.
Now i don't know how to get back...
Anyone help me?
Do i have to restore the kernel and use Samsung Kies?
Sent from my X10i TripNMiUI using XDA Premium App
He's running a custom 2.2 ROM and wants to go back to stock 2.1
Should i use Odin? Will this brick anything if it goes wrong?
Damnit i'm in trouble
right ! chill out, take a breath lol you will be back to normal before you no it !!
first of all, go to www.samfirmware.com to get the firmware you need.
put the downloaded files in the correct boxes using Odin.
If the firmware comes in 3 files, Use 512 PIT and check re-partition
hit start, wait for the pass sign and your done !!
You need the jm1 firmware from samfirmware.com, use the flashing instructions on their site using odin.its very simple, just take your time. Jm1 is a low level firmware for 2.1 which will enable you to upgrade to the latest offering via kies making your phone completely stock and "legit".
It will remove the 3 button recovery and download mode which you can restore using instructions elsewhere but I guess that is the least of your worries for now and is the price for going back to eclair.
Good luck and take your time.
Please hit the thanks button if you find this post useful
Sent from my GTI9000 using XDA App, gingerbread 2.2.3 rooted, ADW launcher + gingerbread theme
you have to flash it using odin. try to find your original firmware in www.samfirmware.com, if not, try to find it using checkfusdownloader descrybed in this post http://forum.xda-developers.com/showthread.php?t=1032437.
once you flash it, sometimes you need to restore your csc code using *#272* Imei # .
once you done that, your phone will be like new, and kies will recognize it, and you will be able to upgrade it via Kies.
You say that you saved the original rom .
That should be re storable depending upon format as to how .
jje
JJEgan said:
You say that you saved the original rom .
That should be re storable depending upon format as to how .
jje
Click to expand...
Click to collapse
no, only the original kernel
so my friend wants a stock 2.1 ROM
should i use the latest European 2.1 ROM from HERE?
and for odin i have to check if there is a sim lock...
if there is one, how do i remove it?
and witch one should i use for 3button combo (I dont know how to get in)
This: http://forum.xda-developers.com/showthread.php?t=785201
or
This: http://forum.xda-developers.com/showthread.php?t=819551
I'm really noob on SGS so please dont blame me...
turn the phone off press and hold volume down , the middle button and power this should give you download mode....
and why would your friend want 2.1? doesn't even support flash...
You should tell your friend to flash JS8 android 2.2.1 it will make the sgs alot better
Jason123420 said:
turn the phone off press and hold volume down , the middle button and power this should give you download mode....
and why would your friend want 2.1? doesn't even support flash...
You should tell your friend to flash JS8 android 2.2.1 it will make the sgs alot better
Click to expand...
Click to collapse
I know, i told him but he's stupid (trust me 0o ) ^^
Thx hope download mode works then...
Sent from my X10i TripNMiUI using XDA Premium App
another question...
isn't there an update.zip from an ORIGINAL ROM?
PoTi_96 said:
another question...
isn't there an update.zip from an ORIGINAL ROM?
Click to expand...
Click to collapse
I have not came across one
Sent from my GT-I9000 using XDA Premium App

[Q] Trying to update to Gingerbread through Kies but it just loops?

Hi,
I'm trying to upgrade my firmware through Kies, as I've just connected and it's alerted me that I am now able to upgrade to PDA:JVN / PHONE:JV1 / CSC:JV5(OPS). I am currently on PDA:JP5 / PHONE:JP3 / CSC:JP4(OPS), but when I click on the upgrade, it will pop up with a window that looks like it's downloading the firmware, but they disappears as quickly as it appeared, and my phone then needs to re-connect to kies...
This appears to be an infinite loop, without ever really getting anyway. My phone is rooted if that matters, and I don't think I have any lag fixes applied? I know I have applied lag fixes before, but I think I've since flashed with the stock 2.2 firmware, so there shouldn't be any lag fixes going on... :/..
Does anyone know what I'm doing wrong or how I can better debug this problem?
Thanks in advance
Denno
denno020 said:
Does anyone know what I'm doing wrong
Click to expand...
Click to collapse
Using Kies, may be
If you have the 3 buttons combo, prefer Odin...
Kies is Satan Tool, its a big cup of ....
if u want do upgrade use just and only ODIN
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
thanks for the reply Ali Khalid... I'm looking on samfirmware, but I'm not able to find the Gingerbread firmware version for Australia? I downloaded I9000XWJVN ## under the 'America Australia Samsung I9000 Firmwares' heading, but that only had a tar file, with a heap of files I didn't recognize..
Any chance you could give me some more direct help? Like exactly which one I should download for Australia? Looking at the country letter code, which is DT for Aus, they only have firmwares for 2.1 and 2.2...
I'm really lost with this upgrading thing :/..
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
denno020 said:
Can someone please help? I need to know which firmware I should download from samfirmware for an Australian I9000...
Thanks
Click to expand...
Click to collapse
Is there a specific reason you need Australian version? You can flash any firmware you wish.
Sent from my GT-I9000 using XDA App
There isn't a specific reason... I thought I would have to go with the Australian one to be sure that calls and stuff can connect to my phone through the network correctly? I'm completely lost with all this stuff to be honest...
If I don't have to get a specific Aussie one, which one should I download? As I mentioned earlier, I downloaded one called I9000XWJVN ## but it didn't have the pda files and pit files as expected.. they were all different things :/..
Im running JVS 2.3.5 (with JVR modem) I haven't bothered to flash an Australian/Optus csc but i guess you can if you wish. I did have to add APNs but that is no big deal.
After that you might want to flash a non-stock kernel for root, lagfix etc. I am running semaphore 1.7 and stock+ theming for extended power menu, %battery crt off etc.
Keep in mind if you are going down this route you will be voiding any warranty you have but ask anyone here it is worth it to make the most of your phone.
Do some reading around the forum and ask any questions you need so you know what you are doing.
Sent from my GT-I9000 using XDA App
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
denno020 said:
Thankyou for your reply Mrlwik, but it's gone totally over my head. I really don't understand any of that.. I have flashed stuff to my phone before, but it was easy because I already had the 3 required files, and there was a step by step..
I guess I could just pop over to the custom roms sub-forum and download one from there and give it a go again..
Do I need to get a special modem or csc file or something to make sure it'll still work with Optus?
Click to expand...
Click to collapse
Sorry I was really confused once too, I will do my best to break it down a little.
You don't need a specific modem for Optus although different modems will give different results depending on your location regarding signal, 3g, gps and battery (due to signal strength) its quick and easy to change modem and this can be done anytime (through CWM recovery) without any data loss.
CSC is a bit different, although you can use a CSC that is different to your location/carrier it basically denotes any specific apps and APNs. CSC can be changed with odin but will factory reset you phone and you will lose data.
-APN details can be found with a quick Google search and can be added no problem through settings>wireless and network>mobile network>access point and as I don't care for carrier specific apps (apart from "my account" but the .apk for that easy to find) I haven't bothered to change it. Others do find it important.
I know the stock 2.3.5 JVS from samfirmware will contain the 3 files (code, modem, csc) and the .pit file for flashing because it is what i flashed.
Or alternitavely there are a few custom roms that can be flashed through odin regardless of what firmware and bootloaders you are currently running.
Some firmwares/ROM only have one file and it can be flashed under PDA. There are guides for flashing on samfirmware(for stock), here and video guides on YouTube. Always stick to the guide.
Decide what direction you want to take (stock with non-stock kernel or custom rom) and read up on some of the topics in the general section about flashing and/or any topics relating to any ROM you want to flash.
Once you know what you want to do with your phone it will mean much less reading for you and others will be able to help you more as you will know what questions to ask.
There is lots of info here, its just a matter of knowing what info you need and how to find it.
Hope that helped a little..
Sent from my GT-I9000 using XDA App
denno020 said:
Thanks for the replies..
I would much prefer to use ODIN too, however I don't want to loose my installed apps and how I've got my home screens set up etc, so this is why I was trying to use Kies. I'm not familiar enough with ODIN to know if there is a way I can use it to upgrade without losing installed apps and home screen layouts etc??
Thanks
Denno
Click to expand...
Click to collapse
If you phone is rooted download titanium backup and backup all apps before flashing, then install it again after flashing and restore only apps.
Wow thankyou so much for that breakdown Mrlwik! That does actually help a little! I'm going to find a stock firmware from samfirmware instead of a custom rom.. But it's great to know that I can swap modems to try and find the one that best suits my needs, as I do have problems with reception in my house, so maybe a new modem could fix that?
Anyways, thankyou again, and great effort and writing all of that with your phone! It definitely helped
Well I finally took the plunge and flashed my phone. I used the JVS firmware, which worked seamlessly. Then I wasn't sure if I were still rooted or not.. so I downloaded Dark Core (or something), and flashed that in PDA using ODIN. Then I was definitely sure I was rooted . Now I've just got to figure out a 'lag fix', my quadrant score at the moment is ~1400, but I reckon I can get much better, so I'll try some overclocking apps from the market I think, see which works best for me.
The most painful thing is restoring all my apps using Titanium Backup.. I have to click install for everyone of them, it doesn't automate it, which is so very annoying, but I'll get there eventually :/... lol
Thanks for all your help Mrlwik, very greatly appreciated
I had a similar problem with KIES in South Africa.
I don't use KIES any longer, it doesn't even have the "connect to internet" option.
Since you've rooted your device, I'm sure you have Clockworkmod flashed...if not, flash that using Odin. After that, you can flash any ROM, custom or stock, using clockworkmod recovery, then you don't require Odin again...just copy the ROM or apps you want to flash to your phone, boot into recovery, flash, and restart. Can't be easier than that.
ali_khalid5518 said:
Well i think if u backup ur apps then u can save them otherwise i dnt think they remain on ur phone while using the odin is simple.
just go to www.samfirmware.com make an account and chk the firmware sec in toolbox and then select ur model and download the latest formware...JVR is the latest firmware on samfirmware download it and download odin extract that downloaded folder and u have 4 file 1 pit file 2 code 3 csc 4 modem.
Now open odin and put these file respectively ( dnt forget to close kies if u have even from running services on windows) now put ur phone in download mode and connect through odin and tick the repartition on leftside and then start odin...
Of all goes well u r on stock GB
wait phone to phone to boot
now choose any kernel to root ur phone and again turnoff ur phone and get in download mode and choose that kernel in pda option of odin and this time unchk the repartition and start odin
now ur rooted
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
My question is, will this wipe out the device? I want to upgrade and keep my information and apps on my phone.

[Q] Galaxy note ics update :-(

galaxy note
Pda:n7000xxla6
phone:n7000xxla4
csc:n7000xeula1
build info:fri jan 20 05:38:08 kst 2012
problem is i check for ics update regularly but it says no software update
but everyone has got there n7000 updated to ics
i havent rooted it nor plan to what should i do....is there a problem with my phone???
p.s:i live in Pakistan.....
Check your csc, then you will see ics is not out for your phone yet.
Dial *#06# that will show hour emei. Write it down, then dial *#272*yourimeinumberhere# that will show your csc, you can change it here, it will wipe your data thought.
Dependant on your rom, you will be able to change it. Then it is still no guarantee update is available thought kies or ota. You can then download rom from sammobile.com. Notice thought all current ics have bug for note, that when you do a factory reset, wipe data or wipe from cwm can brick your phone. So judge if its worth the risk. If I were you I would wait or download cm9, they build a kernel without the bug. Note thought either way you can get warrantee issues
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
Check your csc, then you will see ics is not out for your phone yet.
Dial *#06# that will show hour emei. Write it down, then dial *#272*yourimeinumberhere# that will show your csc, you can change it here, it will wipe your data thought.
Dependant on your rom, you will be able to change it. Then it is still no guarantee update is available thought kies or ota. You can then download rom from sammobile.com. Notice thought all current ics have bug for note, that when you do a factory reset, wipe data or wipe from cwm can brick your phone. So judge if its worth the risk. If I were you I would wait or download cm9, they build a kernel without the bug. Note thought either way you can get warrantee issues
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
well he said he`s just using stock, there`s really nothing us stock people can do? mines from saudi arabia, i find the rooting, and stuff kind of confusing for me so i dont wanna risk it
There are stock multicsc. Without root you can flash it throught pc odin. Then you can update after changing csc or flash the rom you want emediately
All at own risk
Sent from my GT-N7000 using Tapatalk 2
try using kies samsung.com/kies
baz77 said:
Check your csc, then you will see ics is not out for your phone yet.
Dial *#06# that will show hour emei. Write it down, then dial *#272*yourimeinumberhere# that will show your csc, you can change it here, it will wipe your data thought.
Dependant on your rom, you will be able to change it. Then it is still no guarantee update is available thought kies or ota. You can then download rom from sammobile.com. Notice thought all current ics have bug for note, that when you do a factory reset, wipe data or wipe from cwm can brick your phone. So judge if its worth the risk. If I were you I would wait or download cm9, they build a kernel without the bug. Note thought either way you can get warrantee issues
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
zexco said:
well he said he`s just using stock, there`s really nothing us stock people can do? mines from saudi arabia, i find the rooting, and stuff kind of confusing for me so i dont wanna risk it
Click to expand...
Click to collapse
patience people, just follow what the dude above said. I am from the Philippines but my csc is from Poland (xeo).
same issue
I am also from Pakistan. The note that I bought is an Arabian distribution with jpla1 ROM. I am also not receiving the update. Though I got the previous update via it's from 2.3.5 to 2.3.6. What do we do now what do we do???
qazibasit said:
I am also from Pakistan. The note that I bought is an Arabian distribution with jpla1 ROM. I am also not receiving the update. Though I got the previous update via it's from 2.3.5 to 2.3.6. What do we do now what do we do???
Click to expand...
Click to collapse
See my post above, only thing you can do is wait for csc arabian ics, or change csc.
Reposted steps, you will lose data.
Download stock gb rom from country which has csc and ics. Flash it throught pc odin. Perform factory reset from dialer. Change csc with steps I posted before. To make sure right one is selected.
Then update throught kies or if available ota. If no update is available, screw it and download ics rom, flash through pc odin, do not select repartition if you dont have pit file. Do not select clear efs.
Extra info:
I cs or gb rom stock roms, unzip them, should be single tar. Md5 file. In pc odin put these in pda. For flashing phone needs to be in download mode. Press volume down, power and home button simultaniously and keep pressed when phone is booting. Then when it shows download mode connect to pc and open odin. Sometimes takes couple tries press volume button up to confirm dowload mode. Now you can start
Flashing. It takes some time, do not disconnect phone. Wait till odin says passed.
Now you have lost warrantee, all at own risk, but upside you could have working ics. Note do not restore backups as they will most likely cause battery drain and errors.
Do not ever perform reset or factory reset from ics, with any app, not even samsung cause it could brick your phone.
If this helped you can donate to my favourife devs neobuddy, xplodwild and hardcore and Imilka
Find their details in stunner rom, cm9 rom and speedmod developers thread. And paranoid android
Sent from my GT-N7000 using Tapatalk 2
I am from Pak too and i have updated two notes on official German ics without rooting the phone
Sent from my GT-N7000 using xda premium
regards
Thanks for the info..,am still working on it.
im pakistani aswell, upgraded my phone to the official german ICS (LPY) via PC Odin, everything is working great!!!
mirasifbaloch said:
I am from Pak too and i have updated two notes on official German ics without rooting the phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Can you link us to the instructions you used to do this maneuver?
thanks.
I'm in the USA and stock international version and dont know the CDC.
thanksagain
arham93 said:
galaxy note
Pda:n7000xxla6
phone:n7000xxla4
csc:n7000xeula1
build info:fri jan 20 05:38:08 kst 2012
problem is i check for ics update regularly but it says no software update
but everyone has got there n7000 updated to ics
i havent rooted it nor plan to what should i do....is there a problem with my phone???
p.s:i live in Pakistan.....
Click to expand...
Click to collapse
I am wondering if you update using OTA or kies? This ics needs to be updated using kies pc to phone using usb cable.
Sent from my GT-N7000 using XDA
if u are using phone update~u will get no update for ics~pls use kies on pc to update your note to ics,this is working
Guys, Im sorry you find rooting and such hard.
I installed ICS and I love it. Its very nice and havent found anything wrong with it.
Now, this method I am going to show you will put ICS ontop of your Gingerbread, so you will keep your settings, apps and other things. Its easy and only a few things to do, so, lets get started:
Download the ICS rom (hong kong): HERE
Then copy it to your phone
Now for rooting:
Download the Files first and put in your SDCARD CWM, SU-BusyBox
Reboot to recovery (hold vol up, power and home)
Choose and apply the CWM update.
Then do the same with SU.
Choose and Install SU-Busybox-Installer.zip
You are now rooted.
Reboot.
Download and install Mobile Odin.
After installing this, open it and grant it superuser permissions.
Scroll down to open file, select your file and press ok.
Select inject enable everroot, and everything below it, then press flash firmware.
Do a MD5 check if you wish (dont have to, but it is best).
Then after 2-3mins, it should install and reboot.
After reboot, it will take ~5mins to startup as the applications need to be altered for ICS.
So, hopefully, you did that right and now you have ICS!
(Credit for these files go to dr.ketan)
(More information on rooting: Here)
mirasifbaloch said:
I am from Pak too and i have updated two notes on official German ics without rooting the phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
How did you do that ? My CSC code shows its from Poland. Will changing the CSC code to Germany will make it get the update ?
Or if there is any other way please do tell.
Actually flashing a ROM is not that difficult. Just follow what the senior member's post. Follow step by step and you will lead to success. Try few more times and you will be used to it. Don't worry about the binary count as we can reset the binary count using Triangle away and binary reset.
I flash my SGN more than 15 times, keep flashing till I get the fastest ROM I wanted. From GB, German ICS, CM9, Rocket ROM, Criskelo, Litening ROM..
Now I stick to KingDriod. This ROM is damn fast.. Can give it a try..
Cheers..
No need to apply roms
arham93 said:
galaxy note
Pda:n7000xxla6
phone:n7000xxla4
csc:n7000xeula1
build info:fri jan 20 05:38:08 kst 2012
problem is i check for ics update regularly but it says no software update
but everyone has got there n7000 updated to ics
i havent rooted it nor plan to what should i do....is there a problem with my phone???
p.s:i live in Pakistan.....
Click to expand...
Click to collapse
qazibasit said:
I am also from Pakistan. The note that I bought is an Arabian distribution with jpla1 ROM. I am also not receiving the update. Though I got the previous update via it's from 2.3.5 to 2.3.6. What do we do now what do we do???
Click to expand...
Click to collapse
guys ..this is what I did....It worked for my friend too....I had a problem....Wifi was not working for me...i gave my note to the service center.....they checked and said...there is no problem with wifi....and he said...I can update to ICS if you want??....my eyes was like ...asked him to update....tats how i got it..i said to my friend...he also got the update.....try that...
i tried using kies but no use....still shows that gingerbread is latest firmware.....i dont want to root my phone.....
Bro
I am also from Pakistan.
Had flashed german rom on my note and wiping data/factory reset has bricked my phone.
Teletec the official distributor and service provider of samsung in Pakistan has no clue how to restore my phone!
So dont risk your phone.

Samsung I9000 galaxy s MAD

Hi everybody,
Phone Model: Samsung Galaxy S I9000
Made in Country: Korea
Current ROM: 2.3.6 (i flashed this OS by Odin). Baseband: I9000JVU. Karnel: 2.6.35.7-I9000XXJVT-CL617736 [email protected] # k16-11
Build: Gingerbread.XXJVU
Internal Memory: 16GB
Listening Music, Capturing Photo and Video, wifi, Btooth, etc are OK.
Current PROBLEMS:
1. Force Close Box Shows at start-up.
2. After Start-up maximum programs r shown on menu but not run. (example-air control lite,aldiko ebook, allshare, angry birds etc).
3. Internal memory is anyhow fixed(1.4 gb used, 12.4 gb free), not deleted anythings, no pasted on it, not formated.
4. Restarting Several times in a day.
5. Outgoing Call is ok but incoming call is not OK. when a call is made to this no, only a ringtone is heard for 1 second and then the network signal is vanish, then after a few second the network come again.
6. Mobile tracker is on, i can not off. i dont know the 8 digit code.
Solution i HAVE TRIED:
1. Flashed by ODIN with Froyo(2.2.1), Gingerbread(2.3.6, 2.3.4)(PIT, CSC, PDA, PHONE).
2. Flashed by Heimdall with GB and Froyo.
3. Format internal SD with PC by USB storage, BY Phone Settings, By CWM recobery option, By normal recovery option, by PC with MiniTool Partition Wizard Home Edition 7.1. Also tried with Convert to rfs/ext4 by cwm speedmod karnel. BUT I CRIED and crying, no result, old files r back as king stupid.
What should i do? I hope there will be the right person who can solve the problem. BUT i dont know who is THE BOSS.
[email protected]
You can try flashing a jellybean or ICS ROM. That's not a solution, but a good workaround.
Sent from my GT-I9000
Yes I will agree try to upgrade your firmware to either custom Rom > ics or jellybean..
If problems persist then you might have hardware or software problems..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
I9000 ICS
hi,
thanks for ur suggestion. but how? cause my internal sd is write protected, no files exist on internal memory. External is ok.
is there any solution to flash by odin direct to ics without sd support??
amerkiller1995 said:
You can try flashing a jellybean or ICS ROM. That's not a solution, but a good workaround.
Sent from my GT-I9000
Click to expand...
Click to collapse
I9000 ICS
thanks, i have tried to install Darkys v10.2_Extreme_Edition_Final.zip file from external sd, but failed. where internal sd is not working.
can u tell me plz how to flash my device to ICS direct by Odin or Heimdall like GB or Froyo?? Is there any Link to download?
i want to flash with ICS direct, without sd support.
Roots said:
Yes I will agree try to upgrade your firmware to either custom Rom > ics or jellybean..
If problems persist then you might have hardware or software problems..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
Click to expand...
Click to collapse
Odin is only used to flash stock ROM eg froyo, gingerbread
To flash ICS or JB you need working memory, because you flash from recovery.
Not long ago I had a problem with my phone. Only stock ROMs worked, ICS and JB bootlooped and I couldn't use the internal memory. I saw it in file managers and Windows, but I couldn't create our paste any file onto it. It turned out to be faulty internal memory, which just died. I gave it to a Samsung repair centre and after 2 days they fixed it.
Sent from my GT-I9000
Thanks all of you. I think my device is dead anyway

Categories

Resources