Related
I was trying to flash a new kernel, and so i wiped the 2 caches and now im stuck on the Clockwork Recovery Screen. I try rebooting, and all it does is just go back to the Recovery screen. Please help, i want to use my nook color again.
Do you have previously created backup on your SD card ?
If so just restore.
Unfortunatly, i didnt. I just got it a couple days ago and am brand new to all these mods.
me too
This just happened to me as well. I even had a backup image and restored, but it would still loop. I used the following zip which removes clockwork recovery (thanks to the OP that originally posted this) and it then it worked.
Give it a shot
OMG, I LOVE YOU! No really, thank you so much!!! It works perfect!
Your welcome...........
Solidsnake726 said:
OMG, I LOVE YOU! No really, thank you so much!!! It works perfect!
Click to expand...
Click to collapse
I think this is beginning of beautiful relationship
Some additional info that may be relevant or not...
Some users have reported that after clearing the dalvik cache in CWR (as part of the process to flash a custom kernel), the screen locks up and they are unable to return to the main recovery screen.
This was resolved by 1) hook up your nook to the wall charger, 2) hold the power button which will force a reboot, 3) after your nook reboots to its normal screen, restart the kernel flash procedure from the beginning, 4) after you clear the dalvik cache, do not touch anything for at least 30 seconds
After step 4, CWR usually doesn't lock up and you should be able to navigate back to the main recovery screen to finish the kernel flash process. For some reason or another, the nook just needs a little time after clearing the dalvik cache before you can press any buttons.
yan2000kee said:
This just happened to me as well. I even had a backup image and restored, but it would still loop. I used the following zip which removes clockwork recovery (thanks to the OP that originally posted this) and it then it worked.
Give it a shot
Click to expand...
Click to collapse
I have had the same issue as the OP using ROM Manager to install 3.0.0.5 on 1.1.0 using Auto-Nooter 3.0.0. I was able to use the quoted method to break out (for the record I did so before reading this post ). However, I ran into the problem again after a full reroot and am still looking for a permanent solution to the problem.
yan2000kee said:
This just happened to me as well. I even had a backup image and restored, but it would still loop. I used the following zip which removes clockwork recovery (thanks to the OP that originally posted this) and it then it worked.
Give it a shot
Click to expand...
Click to collapse
Sorry for being a noob but what do I do with this file? Just put it on root and run it in CWR?
Moorfrost said:
Sorry for being a noob but what do I do with this file? Just put it on root and run it in CWR?
Click to expand...
Click to collapse
Yes. Boot into CWR and select the zip file from the SD card and flash.
eyecrispy said:
Yes. Boot into CWR and select the zip file from the SD card and flash.
Click to expand...
Click to collapse
Thanx a million, worked like a charm.
Thanks... But one other question...
Thanks for this got me out of the CWR bootloop, but now I'm stuck on the android splash screen.
UPDATE: Just tried to start all over and now it got me a bit further, but to a black screen with a white banner up top that says "Android System"...
Another noob question, sorry. Will this also restore the stock BN recovery? Regardless, thanks.
lekofraggle said:
Another noob question, sorry. Will this also restore the stock BN recovery? Regardless, thanks.
Click to expand...
Click to collapse
yes it does , just did it my self
Lifesaver! Thanks!
Maybe this should be linked to original thread.. So that things are made clear..
Sent from my HTC Desire using XDA App
Sorry to bump this thread, but OP's issue of being stuck in CWR happens to me every time I try to install the overclock kernel on my Eclair nook.
Any advice on what I can do to successfully overclock?
Anoxymoron said:
Sorry to bump this thread, but OP's issue of being stuck in CWR happens to me every time I try to install the overclock kernel on my Eclair nook.
Any advice on what I can do to successfully overclock?
Click to expand...
Click to collapse
I found a work around. Open cwr..flash recovery, exit recovery, reboot from quick boot . Once rebooted go back to cwr flash recovery, reboot into recovery, clear cache flash zip..reboot. This has worked numerous times for me.
bratliff said:
I found a work around. Open cwr..flash recovery, exit recovery, reboot from quick boot . Once rebooted go back to cwr flash recovery, reboot into recovery, clear cache flash zip..reboot. This has worked numerous times for me.
Click to expand...
Click to collapse
This is assuming that CWR is on internal memory.. if you are booting CWR from SD.. you need to take out the SD card then boot up.
Here is CWM Recovery 5.0.0.x for flashing ROMs, making backups, and et cetera.
credits: rmcc (also ported CM)
Instructions - via application: (recommended method as it flashes the latest version)
1. Download ROM Manager from market.
2. Run ROM Manager, pick "Flash recovery", choose LGE Black, give root access, done.
3. Click "Reboot to recovery" to play with it.
Instructions - via flashable package:
0. Download drivers if you don't have them already: http://www.multiupload.com/5VGF3IM0SA
1. Download package here: http://www.multiupload.com/R3IMVSZE7P
2. Run the .bat if you're on windows or the .sh if you're on linux, give root access when asked, done.
3. Use your favorite method to reboot into recovery to play with it.
reserved for possible later use
EDIT: Since it ahs usb and adb working now, I edit.
Hey noejn, can I just replace the old cwm with this? Or I must remove it first? If so, how?
Thnx
Sent from my LG-P970 using Tapatalk
antonio1475 said:
Thanks! Do you expect being able to get at least adb working in recovery? That would be awesome.
Click to expand...
Click to collapse
Later on I can take another look at that but for now I have other priorities.
lesp4ul said:
Hey noejn, can I just replace the old cwm with this? Or I must remove it first? If so, how?
Click to expand...
Click to collapse
Just replace.
Thanks a lot my friend this recovery will support much better our roms. n1
So the emergency recovery wont work after installing this?
Sent from my LG-P970 using Tapatalk
Ipy219 said:
So the emergency recovery wont work after installing this?
Sent from my LG-P970 using Tapatalk
Click to expand...
Click to collapse
Yes it will.
Hi,
Congratulations for that fantastic work.
I ran this Nova Recovery and I selected "Wipe Data" option, to reset to default settings. Then I select the rebbot device option. (Later I wiil install the Nova Rom)
But now when on the boot device they stay on same black screen flashing the 4 below lights.
Can anyone help me?
Lol, when you wipe data it will take a bit more time to boot.
I'm waiting for more than 15 minutes
Is the phone bricked?
As I can't access to any application, is there any way to enter in recovery menu?
hap17 said:
I'm waiting for more than 15 minutes
Is the phone bricked?
Click to expand...
Click to collapse
If you don't have Nova ROM and you can't boot directly into recovery and you're stuck in the boot whenever you power it on, then you'll have to flash a firmware.
hap17 said:
Hi,
Congratulations for that fantastic work.
I ran this Nova Recovery and I selected "Wipe Data" option, to reset to default settings. Then I select the rebbot device option. (Later I wiil install the Nova Rom)
But now when on the boot device they stay on same black screen flashing the 4 below lights.
Can anyone help me?
Click to expand...
Click to collapse
If you haven't nova, you cannot directly boot to recovery. Two ways:
Remove the battery and try again. It will probably fix nothing and may be harmful.
Or go to the firmwares flashing tgread and use method 1 by modaco to reflash stock firmware and do from there.
Enviado desde mi LG-P970 usando Tapatalk
No, I don't hava a Nova Rom (I have the original rom).
I try remove the batery and power on it again, but the problem keeps.
So, I will try this:
"go to the firmwares flashing tgread and use method 1 by modaco to reflash stock firmware and do from there"
hap17 said:
No, I don't hava a Nova Rom (I have the original rom).
I try remove the batery and power on it again, but the problem keeps.
Where can I find this/how to made?:
"go to the firmwares flashing tgread and use method 1 by modaco to reflash stock firmware and do from there"
Click to expand...
Click to collapse
Cannot post the link since I am using Tapatalk, but just Google "P970 firmwares flashing xda" go to it, and read post with calm. Meanwhile, plug in the phone so you don't run out of battery when booting or whatever.
Enviado desde mi LG-P970 usando Tapatalk
Thank you all for the help
I already have the Nova rom, but I only can unbrick? the phone by the method 2 of the referencied thread.
Ups, I didn't know relax was using ext4 on /cache.
This will cause some problems since the recovery isn't ready for it.
I'll later upload a new version.
Thanks!!! Maybe you can find some time to fix the progress bar, too
Sent from my LG-P970
If this is only partially functional too, whats the benefit of installing this?
Noejn it's impossible rewrite the bootloader for hardware combination key for enter to recovery for use with all rom?
It's very dangerous for bricking the phone?
:crying:
So I was in CM 10 and I want to install Modern Combat 4 with 1GB of data. SO, I have to do a swap first because oir internal storage is only 0.90 GB (CMIIW). After I edit the vold.ftab file and then I reboot the phone. But, it won't go to home screen. The only thing I can see is the SAMSUNG LOGO and the Galaxy Mini 2 logo. I think by reinstall CM10 via recovery would fix it. The problem is it won't go to recovery. When I trying to press Power + Up + Down + Menu, it do nothing. It even won't boot up
I have installed STOCKROM via Odin. But I still got a bootloop. Maybe cause the /system of CM10 is still inside.
Flash stock again if you will hawe bootlop turn out batery flash via odin cwm and try go to cwm and wipe ewerything in cwm you hawe botloop becase you flash stock whitout wipe and formating system
Flach the CWM again via odin then install tha CM10 via CWM its so easy
Sent from my GT-S6500D using xda premium
Stop posting these PLEASE HELP threads... just wipe data
TheWhisp said:
Stop posting these PLEASE HELP threads... just wipe data
Click to expand...
Click to collapse
He is right
If you fraid lose your data then don't try to install this rom
Cause any proplem of thoose just to be sure re flash cwm or stock rom
Sent from my GT-S6500D using Tapatalk 2
TheWhisp said:
Stop posting these PLEASE HELP threads... just wipe data
Click to expand...
Click to collapse
Can't you read?? If I want to do a full wipe, I have to go to the recovery first. Oh god!!
flash cwm again..
then go to recovery..
wipe everything
then flash stock rom via odin
or restore a nandroid backup.
---------- Post added at 05:37 PM ---------- Previous post was at 05:29 PM ----------
regarding the game youre trying to install.. you dnt have to edit the vold.fstab.. just use the "directory bind" app.. made by a member of xda developers.. i forgot his name..
do a manual binding.. and you can play games regardless of the data size.. as long as you have a big ext_sd storage
i can play need for speed most wanted HD which has 1.8gb of data.. and it runs faster than sd card swap.
i have same problem
i can't go to recovery with stock
or with cwm
download mode is ok but when trying to get into recovery the phone do no thing
i'm install recovery more than time and same problem
elkhshap said:
i have same problem
i can't go to recovery with stock
or with cwm
download mode is ok but when trying to get into recovery the phone do no thing
i'm install recovery more than time and same problem
Click to expand...
Click to collapse
why did you mess it up? dont ever flsh stock without wiping...if you where on cm10 not booting...you can adb reboot recovery...but in stock you cant...
Fallen_Knight said:
why did you mess it up? dont ever flsh stock without wiping...if you where on cm10 not booting...you can adb reboot recovery...but in stock you cant...
Click to expand...
Click to collapse
then what i can do now and if you have any way to install cm with odin
that happened to me twice...i cant go to recovery...1st time i encountered was with cm10...
i flashed stock then bootloop...so i removed battery and everything...after an hour. i pressed vol up down home power then insert battery...poof...it booted recovery...
second time was with cm10.1.. i cant boot to recovery because i left my phone off for 15mins and forgot to turn on...so i booted cm10.1... typed su then reboot recovery on terminal emulator...then wiped everything then flashed stock then cwm...
I have the same problem i can't access to recovery mode Y_Y
Dinepada said:
I have the same problem i can't access to recovery mode Y_Y
Click to expand...
Click to collapse
read this first to avoid bootloop
under FLASHING CUSTOM ROM PART.
http://forum.xda-developers.com/showthread.php?t=2030758
if you dont follow it it will bootloop
incase of bootloop
use this in odin
http://forum.xda-developers.com/showthread.php?t=2227982
I 've tried pda rescued but i got an error
2 day's later i have same problem
you have to way to fix it
1-
Originally Posted by Callintz96 View Post #72 Link
It work! I'll repeat what i've done:
- Go to download mode
- Flashed recovery 6.2.0.8 and while pressing volup+voldown+home
- Got Ramdump mode, power off removing the battery
- Go to download mode again, and flashed recovery again without volup+voldown+home
- Pressed recovery buttons until it power off and after that it power on in recovery!
this your trying
2 see this
2 day's later i have same problem
you have to way to fix it
1-
Originally Posted by Callintz96 View Post #72 Link
It work! I'll repeat what i've done:
- Go to download mode
- Flashed recovery 6.2.0.8 and while pressing volup+voldown+home
- Got Ramdump mode, power off removing the battery
- Go to download mode again, and flashed recovery again without volup+voldown+home
- Pressed recovery buttons until it power off and after that it power on in recovery!
Click to expand...
Click to collapse
i've tried that and... It Works!!!! Thank You very much!
Dinepada said:
i've tried that and... It Works!!!! Thank You very much!
Click to expand...
Click to collapse
good newa
IKalam82 said:
:crying:
So I was in CM 10 and I want to install Modern Combat 4 with 1GB of data. SO, I have to do a swap first because oir internal storage is only 0.90 GB (CMIIW). After I edit the vold.ftab file and then I reboot the phone. But, it won't go to home screen. The only thing I can see is the SAMSUNG LOGO and the Galaxy Mini 2 logo. I think by reinstall CM10 via recovery would fix it. The problem is it won't go to recovery. When I trying to press Power + Up + Down + Menu, it do nothing. It even won't boot up
I have installed STOCKROM via Odin. But I still got a bootloop. Maybe cause the /system of CM10 is still inside.
Click to expand...
Click to collapse
Go in recovery mode flash CWM and reinstall CM10
boot into recovery and clear cache and data before you flash new rom otherwise you may get bootloop
Do this:
turn off phone
vol- + turn on (like if you want to go to Download mode)
now home, vol- and fast vol+
congratulation you are in recovery !
Guys. I just overclocked using SetCpu. the clocks were at Min clock at 800 MHZ. the max was 1110
So my phone kept rebooting. then i flashed the normal rom
and my phone was at normal state. I flashed Recovery. It went OK and i flashed my preferred custom (thewhisp)
CM10.1 and now my phone is stuck at the bootloader. it takes like forever to boot up.
PLEASE HELP MEH D:
Try reflashing stock rom via odin
Wype data and cache
Sent from my GT-S6500D using xda app-developers app
xfim said:
Try reflashing stock rom via odin
Click to expand...
Click to collapse
in the text i re flashed via odin3 stockrom. I left it for a min. then i flashed recovery reboot as normal.
then flashed via cwm 6.0.3.3 cm10.1 thewhisp trying to boot takes forever
Mini2Fan said:
in the text i re flashed via odin3 stockrom. I left it for a min. then i flashed recovery reboot as normal.
then flashed via cwm 6.0.3.3 cm10.1 thewhisp trying to boot takes forever
Click to expand...
Click to collapse
Sry, i didnt read carefully.
First boot after flashing takes4-10mins so 1min is not enough
xfim said:
Sry, i didnt read carefully.
First boot after flashing takes4-10mins so 1min is not enough
Click to expand...
Click to collapse
but mine from now is like 1 hour 10 mins
boot into recovery then clear cache and data then reboot
EDIT: maybe you had the CPU overclock set to high, if you had that frequently set on boot then maybe that's what was causing the bootloop.
Fixed
pryerlee said:
boot into recovery then clear cache and data then reboot
EDIT: maybe you had the CPU overclock set to high, if you had that frequently set on boot then maybe that's what was causing the bootloop.
Click to expand...
Click to collapse
I lowered my cpu mhz in setcpu in gingerbread. now its normal thx
End of support. Thread closed.
If you get stuck in recovery and can't boot into Android, you need to install the stock recovery to get Android to boot.
Stock recovery flashable zip located HERE.
------------------------------------------------------------------------------------------------------
READ THIS POST BEFORE INSTALLING ANY CUSTOM RECOVERY
CWM Recovery 6.0.4.8
(TWRP is in post 3, Philz Touch in post 4)
Click HERE for the latest version.
Please report any bugs here in this thread.
Thank you to everyone who has (and still will) help in testing!!!!
Credits go to:
@Unjustified Dev for device and kernel source trees
and of course Koush and the CyanogenMod team
Watch THIS VIDEO tutorial for a step by step visual guide for performing the instructions listed below (thanks @Tomsgt for the video).
Instructions:
1. Download ODIN on your computer.
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program. Un-check Auto Reboot. See notes about ODIN below.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them). Also need to enable USB debugging.
7. Select "PDA" (or AP) then choose the recovery file you want to flash. (Unzip the file you downloaded so that you have a file named "recovery.tar.md5".)
8. Hit "START". Wait for Odin to finish (~10-15 seconds). The message area will display "RES OK" when finished.
9. Restart directly to recovery mode before rebooting into OS.(Hold POWER, Volume UP, and the HOME button all at the same time. When you see the Samsung Logo, let go of the POWER button, but keep holding the Volume UP and HOME until you see the recovery screen).
Notes about ODIN
--Make sure that "Re-Partition" is NOT checked.
--Auto Reboot can be un-checked if CWM doesn't flash correctly on your device. Some have reported that un-checking Auto Reboot fixes this issue. If you un-check Auto Reboot, you will need to reboot the device yourself (refer back to step 9).
After you get the custom recovery working, you can flash the latest SuperSu zip to get root.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Watch this video to learn about the navigation issues and Rainbow Mode: http://youtu.be/iCNdxlNzdBI
If the highlight doesn't move on the recovery menu, the selection actually does change. Go ahead and hit Power to select. If the menu goes blank, just hit Volume Up or Down to get it to reappear.
It appears that the menu navigation issue only happens when you use the button combination to boot into recovery. If you use the Quick Boot app or "adb reboot recovery", it seems to work properly. Only use the 3-button method to boot into recovery.
~~~~~~~~~~~~~~~~~~~~~~~~~~~
Flash at own risk!!!!
+++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++
Click HERE for the latest version.
Stock recovery flashable zip located HERE.
Nice!
Sent from the can using two ply
TWRP is reported to be causing problems for now. Please use CWM or Philz Touch (post 4) for now.
TWRP 2.7.0.1 (unofficial)
Click HERE to download the latest version.
I do not have a T110, so this recovery has not been tested by me. Please report if it works for you.
Same install instructions as above.
After installation, you may experience slow behavior in recovery if you use the button combination to boot into recovery. Using Quick Boot from the play store or any other software method to boot into recovery will solve this problem.
Internal card gets mounted as "/data/media/0".
Please report any issues here in this thread and be sure to include which recovery you are using.
+++++++++++++++++++++++++++++++++++++
If you already have root, you can extract the recovery.img from this zip and flash it without Odin by using Flashify from the Play Store.
+++++++++++++++++++++++++++++++++++++
Click HERE to download the latest version.
Unofficial Philz Touch Advanced CWM recovery HERE for testing.
Credits to Phil3759. Original thread located HERE.
Hey hey hey...
Sent from my SPH-L710 using Tapatalk
You are awesome!!!!!
This is so very awesome....thank you!!!!
Sent from my SM-T110 using xda app-developers app
This is amazing, super fast devs rooting the tab 3 lite in no time.
Now it's waiting for a good stock Google rom to speed up this nice tab and losing the awful touchwhizz laggynes.
I have tryed almost all your custom recoverys CWM and none were working. When i try to eneter in recovery i got only blackscreen and the device it is seen by adb
But TWRM is perfect!
Thanks
Getting a notification to update but I haven't rooted yet so I'm not sure if I should.... Had my tab for about a week now....it says some kind of security update anybody else get this
Sent from my SM-T110 using xda app-developers app
mhopewell41 said:
Getting a notification to update but I haven't rooted yet so I'm not sure if I should.... Had my tab for about a week now....it says some kind of security update anybody else get this
Sent from my SM-T110 using xda app-developers app
Click to expand...
Click to collapse
Security is something else. Not software update.
It is a new protection from samsung, generaly with knox from 4.2.2 software and newer!
TWRP updated to version 2.7.0.0
Hi, thanks for the share of recovery, i have a problem tho, the device is in a bootloop of recovery, i press reboot to system in twrp and it reboots to twrp, if i power off the tablet and power on it boots to twrp, i've factory reset but stills reboots to twrp, what can i do?
sewa2k said:
Hi, thanks for the share of recovery, i have a problem tho, the device is in a bootloop of recovery, i press reboot to system in twrp and it reboots to twrp, if i power off the tablet and power on it boots to twrp, i've factory reset but stills reboots to twrp, what can i do?
Click to expand...
Click to collapse
Did you wipe anything while booted into recovery? I sounds like system or boot was wiped. You may need to flash the stock firmware in Odin.
Sent from my SM-T310 using Tapatalk
gr8nole said:
Did you wipe anything while booted into recovery? I sounds like system or boot was wiped. You may need to flash the stock firmware in Odin.
Sent from my SM-T310 using Tapatalk
Click to expand...
Click to collapse
Stuck in bootloop in recovery as well after rooting. Using CWM recovery and did not wipe anything at all. Going to try again.
sewa2k said:
Hi, thanks for the share of recovery, i have a problem tho, the device is in a bootloop of recovery, i press reboot to system in twrp and it reboots to twrp, if i power off the tablet and power on it boots to twrp, i've factory reset but stills reboots to twrp, what can i do?
Click to expand...
Click to collapse
mhopewell41 said:
Stuck in bootloop in recovery as well after rooting. Using CWM recovery and did not wipe anything at all. Going to try again.
Click to expand...
Click to collapse
Me to.. and im looking for a solution..
Streykatorato said:
Me to.. and im looking for a solution..
Click to expand...
Click to collapse
Try wiping cache.
gr8nole said:
Try wiping cache.
Click to expand...
Click to collapse
Didnt work.. tried.. any other solution?..
Streykatorato said:
Didnt work.. tried.. any other solution?..
Click to expand...
Click to collapse
Tried a full data wipe?
Sent from my SCH-I605
gr8nole said:
Tried a full data wipe?
Sent from my SCH-I605
Click to expand...
Click to collapse
Yup.. tried that too..