Hi,
I'm pretty sure the microUSB port on my AT&T Captivate is shot... It will charge using the outlet adapter, but will *not* charge or connect to any of several PCs. I've uninstalled/reinstalled drivers multi times, and another Captivate exactly like it connects just fine (with same cable, same port, etc.) Good news: it's still under warranty. Bad news: it's been rooted and updated with a "Low-designgears" util.
Do I need to revert to stock in order to return for warranty, and is it possible to do that if the phone can't connect to a PC?
Stupid questions probably. Thank you.
I would think that you need to return to stock...you can chance it. But it's up to you.
Sent from my SGH-I897 using XDA Premium App
What firmware are u on? I think there was a cwm flashable stock somewhere...don't know if that would help.
Sent from my SGH-I897 using XDA Premium App
There is a cwm flashable jh7 but I think it only works from 2.1. Might work with 2.2 but if all else fails format boot in recovery and tell at&t your phone said there was an update and it failed. I would probably format system, cache, and data too just so there isn't any evidence of your wrong doing. Unlikely it would ever find its way back to you though. Has worked for a lot of people.
It should hard brick your phone though
Sent from my I897 using xda premium
Firmware is 2.2. Thanks for the help. I'll look for that cwm flashable, and consider my options. Thanks.
xijar said:
There is a cwm flashable jh7 but I think it only works from 2.1. Might work with 2.2 but if all else fails format boot in recovery and tell at&t your phone said there was an update and it failed. I would probably format system, cache, and data too just so there isn't any evidence of your wrong doing. Unlikely it would ever find its way back to you though. Has worked for a lot of people.
It should hard brick your phone though
Sent from my I897 using xda premium
Click to expand...
Click to collapse
1. As long as it's rooted he can replace 3e recovery, install cwm, and flash that from 2.2.
2. Formatting does not hard brick. Why would there be an option that would completely **** your phone? Like a self destruct button that could accidentally be pressed if you don't know what you're doing. Makes no sense.
studacris said:
1. As long as it's rooted he can replace 3e recovery, install cwm, and flash that from 2.2.
2. Formatting does not hard brick. Why would there be an option that would completely **** your phone? Like a self destruct button that could accidentally be pressed if you don't know what you're doing. Makes no sense.
Click to expand...
Click to collapse
Sorry, back again guys...
I've got cwm installed but I can't find a way to get past 3e recovery. I tried to flash cwm recovery from rom mgr - and it says current recover is cwm 2.5.1.2 - but going into recovery mode still shows 3e (don't know what cwm recovery should look like). Flashing any rom (tried a couple customs too) dies with sig verification error.
been searching for a few hours on replacing 3e, but everything i run across requires ability to connect with the pc.
any idea how i can replace 3e recovery without ability to connect via usb?
http://forum.xda-developers.com/showthread.php?t=1052991
The second method does not require a pc. Download the fix files with your phone, then download a file explorer from the market that has root access, root explorer, file expert, astro file manager to name a couple. Paste in the file reboot into recovery, reinstall packages twice and that will boot you into cwm, which its green with more options...
brick the phone n say kies ****ed it up. that worked for me.
Samsung captivate
glitch kernel
cyanogenmod 7 #89
OC and UV
Related
...
I want to Flash/Install different ROM on my phone but I don't have 3 button recovery... I also believe I will need to root it? Not sure if I've read correctly...
I'm guessing I first need to get the 3 button recovery working? Do I need to download something for this? Will I need to root the phone before this step, or afterwards?
Then do I use Odin (1.3) to install the new ROM?
I have downloaded the Android SDK (for adb), a fix file for the 3 Button recovery, Odin 1.3. Is there anything else I will need to carry out all of the above?
Very grateful for any help.
I have international I9000 and I used these instructions, they're in Russian, you can translate them with google
searching for the file that is mentioned there I could find this, which is the same
rooting is another thing, this one is for replacing bootloader
another manuals
Davey Boy said:
...
I want to Flash/Install different ROM on my phone but I don't have 3 button recovery... I also believe I will need to root it? Not sure if I've read correctly...
I'm guessing I first need to get the 3 button recovery working? Do I need to download something for this? Will I need to root the phone before this step, or afterwards?
Then do I use Odin (1.3) to install the new ROM?
I have downloaded the Android SDK (for adb), a fix file for the 3 Button recovery, Odin 1.3. Is there anything else I will need to carry out all of the above?
Very grateful for any help.
Click to expand...
Click to collapse
Read other post regardig making jig easy as abc
Sent from my GT-I9000 using XDA Premium App
Ok, so I've got the 3 button recovery working, rooted (not sure if this step is necessary?), unlocked... is there anything else before I flash a newer ROM to the handset? (of course, I will make sure I've backed up the phone too).
Also, if you could suggest a ROM for me to download. Would like the latest stable release of android (I'm guessing one of the variants of Froyo? Currently running Eclair).
Thanks.
Rom Kitchin build your own .
I am using
XWJS8 with JPX modem CSC using CPW as it covers most of UK networks .
http://forum.xda-developers.com/showthread.php?t=817703
http://romkitchen.org/sgs/?s=generator
jje
I've created a ROM with the above properties... I think I've got everything right. I have the 3 button recovery though if things go t*ts up though, right? lol
Davey Boy said:
I've created a ROM with the above properties... I think I've got everything right. I have the 3 button recovery though if things go t*ts up though, right? lol
Click to expand...
Click to collapse
You may need to flash that kitchen rom twice i found this with kitchen roms good luck
Sent from my GT-I9000 using XDA Premium App
Thanks for the tip!... Just trying to get clockworkmod recovery to load up on rebooting the handset... I have to rename update.zip on the internal sd card I believe??
Davey boy - make sure you can get into download mode before you go any further.
Sent from my GT-I9000 using XDA Premium App
When holding volume down, home and power I get "Downloading... Do not turn off Target!!!" - That's right isn't it?
I still can't seem to be able to access the ClockworkMod Recovery though on rebooting the handset (after renaming the original update.zip on my internal SD card to aupdate.zip) - Any suggestions?
Update .
Is the name usually .
jje
I ended up installing JV1 from samfirmware, but am wanting to downgrade it to a later Froyo build. Or a custom ROM... not sure yet.
How would I got about installing a "ROM Kitchen" ROM manually? I can't load ClockworkMod Recovery to install from SD card.
Edit: Just going to reinstall Eclair and install the ROM through CWM that way.
Hi small question someone might know how do you do a carrier firmware backup? Before you do the reflash?
Are you sure you're pressing the right combination?
Press volup + power + home
And release them when Samsung logo appears, or it will just reboot again
Yep, that was the combination I used. Managed to get it all running using the latter method.
Sent from my GT-I9000 using XDA App
I got my phone back just 3 days ago and figured i'd finally customize it. I FINALLY figured out a safe and full-proof way of rooting my samsung galaxy s i9000M. I FINALLY figured out that I need to switch the <3e> recovery to <2e> recovery so that I'm able to flash custom ROMs.
Here's the annoying part...
I STILL can't set up Clockworkmod recovery instead of the stock recovery menu. The tutorial I'm following specifies that I need this recovery in order to get everything workin.
I have the phone rooted and I have ROM manager installed too.
Won't someone tell me how to install it on my phone?
I've tried this website:
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
didn't work many times
thanks in advance!
stacyluo said:
Hi, I'm new to this forum.
Click to expand...
Click to collapse
gotta start somewhere
I should point out, it keeps saying "can't open /sdcard/update.zip"
(no such file or directory) if that helps
You mean you don't have recovery yet or you can't install any zip files?
Sent from my GT-I9000 using XDA Premium App
You'll probably need to do it via Odin.
If you look at the guides here on XDA you'll see easily how to do this.
There are probably easier ways to do by now, but you can follow the more traditional method without much difficulty and not really with that many screw up chances.
Just grab a custom Kernel, like SpeedMod or so, for Odin installation.
Follow the steps that you'll see on the Odin guide to install just the Kernel. Once that is done the Recovery mode will be altered and you can start using CWM normally from there on (or until you install some other full ROM that replaces the kernel and recovers the official recovery mode).
Ok so I started with a KB2 on 2.2 I flashed it back to 2.1 JF6 with Odin and I ordered a JIG which helped me get out of a brick situation. I installed CWM and I got into recovery but the screen does not say anything about installing from ZIP It just has the 4 choices reset, reinstall and so on...
There is so much information out there it is hard to know what to do. I would like to start flashing ROMs but I think I missed a step or something so before I go any further I have tried all the button combos and I cannot get into recovery and the times that I did before said nothing about installing anything from a zip.
PLEASE ADVISE
Aloha..MJ
Sounds like 3e recovery. You will need to bypass signature verification...
You might be better off just flashing a different kernel to get cwm and flash from there..
Use Odin or heimdall to flash a different kernel that has cwm
Sent from my SAMSUNG-SGH-I897 using XDA App
sounds like he is seeing the stock recovery. if he is indeed on 2.1, then its 2e recovery. reinstall packages, the phone will reboot into recovery, then reinstall packages again, you will be kicked over to CWM
woops. I looked over the part that said he flashed jf6. Excuse me. Sorry
Yes reinstall twice, like he said
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks PirateGhost
Thanks alot man that did the trick I reinstalled twice and I was kicked right into CWM and flashed CM7 and everything is working fine
Hi all.
I picked up a used cappy that was "bricked" for cheap. It simply bootlooped on the AT&T screen.
Took it home, hooked it up and odin'ed stock kfc1 with bootloaders onto it. I have now tried every one click Odin or hiemdal gb file I can find, and it just sits at the att screen. Download mode works fine, recovery doesn't.
Flashing a gb kernel with cwm through odin works, but still no boot or recovery.
What am I missing?
Thanks!
Sent from my SAMSUNG-SGH-I957 using Tapatalk
you might want to try flashing a stock ROM with Odin, I'm sure you can find some around the forum =) It's really hard to hard brick the cappy, and since download mode works all you need is a working ROM, so yeah, just go with a stock ROM first
A stock ROM is what I've been attempting to do. I have tried all the 1 click stock packages in the sticky in the development forum..
Sent from my SAMSUNG-SGH-I777 using XDA
Try not using a 1 click
I tried that as well.
I flashed one at a time (meaning just the bootloader, then just the kernel, and finally the rom itself), as well as everything at once.
Proper bootloaders flash fine, kernel flashes fine, and roms appear to flash fine.
Just failure to boot or recovery..
I'm at a loss..
Edit; autocorrect fail
Sent from my SAMSUNG-SGH-I777 using XDA
Sounds like the same problem I'm having, unfortunately I believe it's related to a bad internal sd partition and as of yet I've found no way to fix it
If you flash stock eclair, can you enter recovery?
That was the only recovery I was able to access, from there running adb shell, then dmesg I was able to see that the internalsd was corrupted or at least not mounting.
Still not able to enter recovery even on Eclaire.
I think Ill send it to Samsung USA and see what they say..
Sent from my SAMSUNG-SGH-I957 using XDA Premium HD app
I figured I would update this, I called Samsung and gave them my imei number and they stated it was still under warranty.
So I sent them the device.
The internal SD was corrupt or bad as stated on the invoice.
I have it back and it works free of charge!
Thanks Sammy!
Sent from my SAMSUNG-SGH-I777 using XDA
Ok first off, I am pretty green newbie, please help me understand this stuff.
This is my girlfriend's phone, she was using it and it reset itself and now it seems to be stuck in a boot loop.
We'd like to try and recover the original system back to normal without having to use the built in system reset. I've heard I can do that by wiping the dalvk cache?
It is not rooted, and I'm driving myself crazy trying to figure it out. There's ways to root it but I can't get into the system to run things like zergrush or the other options.
I tried to flash clockwork mod, but since the built in recovery tool only sees the INTERNAL SD contents, I only have access to the EXTERNAL SD card to put ZIPs in. I tried to use ADB to push the zip onto the internal SD Card but it says access denied (because it's unrooted?) Now what?
So short of system resetting it and loosing all the system settings or trying to see if we can send it into samsung for a replacement, how do I do this?
Thank you for any help in advance. Please be gentle.
Put cwm on the phone via Odin, on a question asked yesterday almost exact problem I posted a link with instructions how to do this, MAKE SURE it is a t679 not t759! Otherwise you will brick your device
Sent from my SGH-T679 using xda app-developers app
Unrooted, your only real options are factory reset or use Odin.
Sent from my SGH-T679 using xda app-developers app
That is not true, if he gets cwm on it via Odin he can flash to stock through cwm, doing so would bring the phone back to out of the box condition with 2.3.6. Also it will save ALOT of time doing cwm through Odin rather than return to stock via odin
Sent from my SGH-T679 using xda app-developers app
It is a T679, yes.
OK according to the wiki page for the phone, I see how to use Odin to bring the phone back to stock, which is great, but I just want to be able to root it to wipe the dalvik cache in hopes of stopping the boot loop. Hopefully this would get the phone working like normal again without deleting the old system, right?
With the Odin program, how would I use it to force the CWM.zip to root it and give me access to the recovery menu to wipe the cache? Or am I missing something?
Again, sorry for not quite getting this stuff. Thank you for helping.
Check here:
http://forum.xda-developers.com/showpost.php?p=26860509&postcount=4
Down near the bottom.
http://forum.xda-developers.com/showthread.php?t=1686384
Sent from my SGH-T679 using xda app-developers app
tazmaniondvl said:
That is not true, if he gets cwm on it via Odin he can flash to stock through cwm, doing so would bring the phone back to out of the box condition with 2.3.6. Also it will save ALOT of time doing cwm through Odin rather than return to stock via odin
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
My bad, I forgot there was a cwm for Odin on this phone. I got mine after the 2.3.6 update and you could flash it thru stock recovery. Plus I've only used Odin once and that was to root my Gtab 2.
Sent from my GT-P3113 using xda app-developers app
OK thank you guys, using Odin did manage to get CWM recovery pushed into the phone.
The current problem is that wiping cache/dalvik is not fixing the boot looping.
I tried wiping battery stats, fixing permissions, wiping cache/dalvik, etc. and while it does cause the phone to sit on the "SAMSUNG" opening for about 2 mins, it still bootloops after that.
now, because I want to try and somehow preserve the old stock system (she has a lot of settings and programs that she needs to get access to) I can't just wipe everything and start over fresh.
Now, again, I am a newbie, but if I'm not mistaken, can I do a nandbackup onto the external SD card and this will allow me to just wipe to original stock, get it fully working again, then do an ADVANCED RESTORE of only the /system to get it back to the way it was before?
Again thanks for the help (and putting up with newbies) :3
Wilford Brimley said:
.
now, because I want to try and somehow preserve the old stock system (she has a lot of settings and programs that she needs to get access to) I can't just wipe everything and start over fresh.
Now, again, I am a newbie, but if I'm not mistaken, can I do a nandbackup onto the external SD card and this will allow me to just wipe to original stock, get it fully working again, then do an ADVANCED RESTORE of only the /system to get it back to the way it was before?
Click to expand...
Click to collapse
If you go back to stock and then advanced restore system you will probably be right back where you are now. Do another backup before trying that.
P.S. Make sure you have a way to keep track of the backups. Write it down or something.
Sorry bro if it is sticking on the Samsung logo, your phone does not have a rom
Sent from my SGH-T679 using xda app-developers app