Related
Hello, i'm new to this forum, i would like to thank you for taking your time to help me out.
First, i had a clean Starhub 2.1 android running milestone with update1, i flashed the G.O.T open recovery's of STAR_36_GOT_SERVICE.sbf to my phone, follow up by, opening the recovery mode and open the G.O.T open recovery's thru the updates.zip as instructed. After that i rooted the phone with the options there. after rebooting my phone and ensure that superuser is already there. i when back to the recovery menu and flashed the fastlightrom v2a, after indicating that it is done, i reboot the system and check the free space in setting it was 164mb or somewhere near there. With this and i went back to the recovery menu and went to the app2sd hack menu and split my sd card, i chosen the 8gb one, which create 1gb ext2 if i am not wrong, after the process is done, i went to install app2sd symlik edition, everything went smoothly and i reboot the phone and check the space again, it had 194mb ( Oh yeah ! ) Does this mean that app2sd had sucessfully installed to my phone?
To ensure that it is, i went ahead and install program like launcherpro, msntalk , and so on. i found out that , my memory had began to drop to 189mb, nevertheless so had sdcard. My Sdcard display a maximum of 6.9xgb of space, which means the sd card split was a sucess right? My worried start here, am i safe to say that the others programs that i am going to install from now on would be install to my sd instead?
I also found out that my current cpu freq was 1000mhz , by using android system info found in the market, i went to download the overclocking widget, i manage to tweak here and there and revert it back to 550mhz, so am i on the safe track that i did not hurt my phone in any way or other?
- Went to the recovery menu and clock it to 650mhz instead. solved?
Any kind soul could enlighten me with some good advices or config? i was temp to install the app2sd provided by dsixda's post when i post my enquire there.
And also, it seem that all my .apk that require root installation when i download them from the internet, i found out that it had become a zip file instead, with this i am unable to install it thru adb install right?
Thanks for taking your time to read this message, please give your advises, Sorry for my bad english.
Solved my doubts thanks.
Ok, first off i'll say i don't have much android knowledge. I did successfully root it following a video. I now have one click lag fix installed. Now, someone please answer these for me
1. Now that its already rooted successfully, is bricking still possible? or is that only something that happens during trying to root.
2. What is a good way to backup everything on my phone? and where do i find it?
3. What are cool apps or widgets to have that can only be used on a rooted phone?
4. Lastly, will someone point me in the direction of a manual or instructions on how to install custom roms and how to get froyo.
Thanks!!
i'd like to know that too...
C-4Nati said:
Ok, first off i'll say i don't have much android knowledge. I did successfully root it following a video. I now have one click lag fix installed. Now, someone please answer these for me
1. Now that its already rooted successfully, is bricking still possible? or is that only something that happens during trying to root.
2. What is a good way to backup everything on my phone? and where do i find it?
3. What are cool apps or widgets to have that can only be used on a rooted phone?
4. Lastly, will someone point me in the direction of a manual or instructions on how to install custom roms and how to get froyo.
Thanks!!
Click to expand...
Click to collapse
1. No
2. Titanium Backup from the market
3. I don't know but I don't care much for widgets.
4. Check sticky posts here and the dev board of galaxy s
try SetCPU for conserving/overclocking your device,
Titanium Backup is godsend! well worth the price
Try rom manager from the market, it will assist in making a more comprohensive backup
Most custom roms should have a good install guide with them and aslong as you read it first, download everything first, and not get scared off by the reference to all the diferent csc files its qctually fairly easy. In the event that it does go wrong it probably was a user error but easily fixed by going over the steps again (i myself only just flashed my first android last weekend, and the improvement is worth the time and small hassle of learning to do it your self).
Some good apps are ShootMe (screenshot app), rescan media root (controls the media scanner function), cache cleaner, and there are some wifi transfer app that need root to work (still fairly new/beta/buggy). Not root but the xda forum app aswell
Hope that helps a bit
Sent from my GT-I9000T using XDA App
oh and autokiller to alter the minfree setting. makes the phone fly!
Root file manager
C-4Nati said:
3. What are cool apps or widgets to have that can only be used on a rooted phone?
Click to expand...
Click to collapse
I am looking for a good root file manager - one that allows me to see whole device. Anyone know of a good one?
reydoog said:
I am looking for a good root file manager - one that allows me to see whole device. Anyone know of a good one?
Click to expand...
Click to collapse
Root Explorer is the best file manager i've come across, works great and well worth the price.
Best apps (I know these dont all require root) I've come across are
"App 2 SD" - This moves your installed apps (that are compatible) to your external memory card to save phone memory
"Titanium backup" (root) - As mentioned above, its a great backup tool for your apps and settings
"CacheMate" (root) - clears your apps cache, helps speed things up
"MixGet" - increase headphone volume, very useful if you find output it quiet, be careful not to deafen yourself
"PhoneMyPC" - Connect via wifi to your computer and control, useful if you want to be lazy and sit back to move the mouse
Best thing to do is goto market and search "root", that will return the majority of them
"Handcent SMS" - Very customisable sms app, much better than stock samsung one
Good games:
Angry Birds - This is free but includes ad's (turn off internet on phone so they dont display)
Talking Tom cat - repeats everything you say in a funny voice
Need for speed Shift - Excellent graphics, really good racing game
Asphalt 5 - (can get this free from samsung apps)
Widgets I use:
Accuweather - self explanatory, great for the days weather, includes a clock (find this on samsung apps on F.W JPM) available in market
Facebook - Facebook Status updates
If I think of any others I'll let you know
My Samsung Galaxy ACE S5830 needs the kiss of life, so as to return to the 21st century.
It has slow responses and quite often freezes and messes up with my nerves.
It currently runs on a 2.3.5 android version.
I want to root it, take a backup, increase ram by creating a partition in my new sd card and install a light custom rom (like MIUI). For this purpose, I just bought a very fast Kingston 32GB, class 10 U3, sd card with theoretical 90MBs read and 80MBs write speed. I think that will suffice.
I am a simple user and I need basic functions. My main issue is to get a faster response from the phone. I don’t play games and I am not a major fun of social media. I just want to want to use it mainly as a phone, for calls, messages, Viber, and some extra facilities like emailing, web browsing, watching some videos online (news and youtube), occasional photos, listen to music, and install a GPS program like Sygic.
I’ve already read a lot about the whole process, but as I’m doing it for the first time in my life I want to make sure that I got it right. And I have a few ambiguities.
Please advise or freely suggest if any better/easier method is available.
1. Rooting.
I decided to use Kingo Root. So, I need to download Kingo Root to my pc and connect the phone (having enabled USB debugging) and just press Root. Then check if rooting is successful with Root Checker. Then download and install SuperSU app. And I’m done.
Do I need to unlock my bootloader, too?
2. Backup.
a) Take an image of the existing ROM.
Download and install ROM Manager, flash ClockworkMod Recovery and update. Boot in to recovery by using ROM Manager or manually by pressing simultaneously UP+POWER+HOME buttons. Then go to Backup and Restore and take a backup image. Right?
b) Backup apps and messages.
I want to take just 2 backups here, my text messages and my Viber messages. Do I use Titanium or something else? My contacts are already synchronized with Google. If I use a MIUI stock rom do I need to take a backup of my contacts too?
3. Increase phone's RAM
I think now is the right time to increase the phone’s RAM. Do I need to partition it with CWM? Or I just use an app like Ram Expander? Do I do both? I mean firstly partition the sd to the desired size and then use Ram Expander? None of the above? What do you suggest? I have read some other possible solutions like using INT2EXT+ after partition. And when I download a new app how will the phone know where to store it, in phone’s RAM or in sd card?
The key factor is speed and efficiency.
I’ve also read that “Even though the Internal Storage would read 2GB (or whatever is your partition size), the apps would still use some amount of REAL INTERNAL Storage for data, hence you need at least 100MB REAL Internal Memory for every 500MB SD-EXT memory.” Is this true? And if so, since I believe the Galaxy ACE S5830 has about 150 MB RAM the most I can actually get is 750 MB RAM?
It is important to get as much RAM as possible because I’ve read that Sygic (the GPS Navigator app) needs to be installed in phone’s RAM to work properly and it is about 700MB.
4. Install Stock ROM
Finally, the time has come to install a new stock rom. I am thinking about MIUI 6. I like its interface and I’ve heard it is light and fast. Any better suggestions? Can I do it in my phone?
My problem here is this, is MIUI a fully functional stock rom, which means I just download it and flash it or is it a “port rom” which means I have to previously install some android 4.4.x base rom? I have read in some article that is needs a compatible android rom to lean on before installing. Is that so?
Here I am stuck, I can’t decide how to proceed and I need your help.
Sorry, if the post is too long.
Hi there, long time galaxy ace user and MIUI lover here.
1. For rooting my device, I just flashed a zip in recovery mode. Can't find the link to that thread.
2. Yes, backup is very important right after rooting, especially for beginners.
As for sms backup, I recommend using SMS backup and Restore, which can be downloaded from the market. I haven't used viber, so I don't know which app would be the best for backing it up, but you can try Titanium backup. For contacts, you can sync them as long as you flash a g-apps package and sign in with the same google account. To be sure, you can try exporting your contacts to your sd card and import it later on (.vcf)
3. I did not even increase my phone's ram via swap, Even with a tiny ram, Miui on top of Cm7 is pretty fast and can handle any basic task such as browsing, youtube videos, music, calling, camera, camcording and messaging with minimal stutters. (I don't play games btw)
4. If you are a simple phone user just like me, who only need some calls, sms and browsing functionality, the best bet would be to use MIUI builds based on gingerbread (CM7). I found that MIUIv4 builds (ICS and JB) are poorly optimized for our device. Also, there are currently no MIUI v5 or v6 builds for armv6 devices.
My personal recommendation is: MIUIXXX http://forum.xda-developers.com/showthread.php?t=1908444 which comes with FireKernel OC.
I use Gabreek's Miui v5 theme, which you can find it on his thread http://forum.xda-developers.com/showthread.php?t=2280553 In my opinion, his v5 theme is the best, because of LOTS of app icons and the overall feel.
Also, be sure to flash a g-apps package for gingerbread after flashing the rom.
MIUI v4 snapseries build is too unresponsive for me, and missing some features like screen off animation. http://forum.xda-developers.com/showthread.php?t=1879323
MIUI v4 JB by msnnsm is also good, but consumes lots of ram http://forum.xda-developers.com/showthread.php?t=2054460.
TL;DR: flash an miui gb rom. It is the best in terms of stability and speed.
Thanks for your prompt answer and suggestions my friend. I will follow them all.
One question please, which is the most important query for me:
After I have made all the preparations (root and have taken a backup image with CWM, messages, etc.), what is the next step?
a) I need to install and flash the phone with a CM7 first and then install and flash MIUIXXX?
or
b) I just flash MIUIXXX straight away?
Also, I am not sure I understood correctly, Gabreek's Miui v5 (which is now updated to v6) is an alternative MIUI rom or a theme? Because I have downloaded it and it is a zip file not an .mtz file.
I am sorry if these sound like very noobish questions but I want to make sure that I understand what I am doing before I actually do it.
Thanks again for your help.
tommycr7 said:
Thanks for your prompt answer and suggestions my friend. I will follow them all.
One question please, which is the most important query for me:
After I have made all the preparations (root and have taken a backup image with CWM, messages, etc.), what is the next step?
a) I need to install and flash the phone with a CM7 first and then install and flash MIUIXXX?
or
b) I just flash MIUIXXX straight away?
Also, I am not sure I understood correctly, Gabreek's Miui v5 (which is now updated to v6) is an alternative MIUI rom or a theme? Because I have downloaded it and it is a zip file not an .mtz file.
I am sorry if these sound like very noobish questions but I want to make sure that I understand what I am doing before I actually do it.
Thanks again for your help.
Click to expand...
Click to collapse
It's completely fine to flash miuiXXX right away (B)
gabreek's is another MIUI rom, but bluetooth is not working in his v6 build. The theme file (mtz) is somewhere in the bottom of the post, below some useful tips and just above the credits part of his post
Thanks again for your help.
I also thought the same, but I wanted to make sure.
I have already rooted my phone and I am in the process of taking various backups.
I will try the rom you have recommended and I will revert to report.
I think I owe you as much.
Btw do you know if Themer works in MIUI? It's quite an impressive app to have.
Cheers
as far as i know, themer does not work.
Also, MIUI comes with its own theme engine, and you can download online, which is very nice.
Remember that when Applying themes, do not include lockscreen (uncheck lockscreen) . Lockscreens from the Theme app are meant for HDPI device, and you won't be able to unlock your phone if you apply them. If you accidentally get stuck on the lockscreen, press volume up and back button at the same time. It will unlock your phone.
There are a handful of themes ported to MDPI which you can use over here: http://forum.xda-developers.com/showthread.php?t=1428940
So far, so good, I have not experienced any major problems.
2 more things to ask if you dont mind.
a. Where do I get the gapps file to flash from? Is is a specific file for our rom (MIUIXXX) or any gapps file will do?
b. Can I add an extra language, in the android keyboard or do I have to use an app for this? Or even better in the system itself. I am from Greece and I would find it very convenient in some tasks of the phone. I mean since it is essentially a MIUI rom and MIUI has the greek language in its official roms, there must be a way that this can be done.
tommycr7 said:
My Samsung Galaxy ACE S5830 needs the kiss of life, so as to return to the 21st century.
It has slow responses and quite often freezes and messes up with my nerves.
It currently runs on a 2.3.5 android version.
I want to root it, take a backup, increase ram by creating a partition in my new sd card and install a light custom rom (like MIUI). For this purpose, I just bought a very fast Kingston 32GB, class 10 U3, sd card with theoretical 90MBs read and 80MBs write speed. I think that will suffice.
I am a simple user and I need basic functions. My main issue is to get a faster response from the phone. I don’t play games and I am not a major fun of social media. I just want to want to use it mainly as a phone, for calls, messages, Viber, and some extra facilities like emailing, web browsing, watching some videos online (news and youtube), occasional photos, listen to music, and install a GPS program like Sygic.
I’ve already read a lot about the whole process, but as I’m doing it for the first time in my life I want to make sure that I got it right. And I have a few ambiguities.
Please advise or freely suggest if any better/easier method is available.
1. Rooting.
I decided to use Kingo Root. So, I need to download Kingo Root to my pc and connect the phone (having enabled USB debugging) and just press Root. Then check if rooting is successful with Root Checker. Then download and install SuperSU app. And I’m done.
Do I need to unlock my bootloader, too?
2. Backup.
a) Take an image of the existing ROM.
Download and install ROM Manager, flash ClockworkMod Recovery and update. Boot in to recovery by using ROM Manager or manually by pressing simultaneously UP+POWER+HOME buttons. Then go to Backup and Restore and take a backup image. Right?
b) Backup apps and messages.
I want to take just 2 backups here, my text messages and my Viber messages. Do I use Titanium or something else? My contacts are already synchronized with Google. If I use a MIUI stock rom do I need to take a backup of my contacts too?
3. Increase phone's RAM
I think now is the right time to increase the phone’s RAM. Do I need to partition it with CWM? Or I just use an app like Ram Expander? Do I do both? I mean firstly partition the sd to the desired size and then use Ram Expander? None of the above? What do you suggest? I have read some other possible solutions like using INT2EXT+ after partition. And when I download a new app how will the phone know where to store it, in phone’s RAM or in sd card?
The key factor is speed and efficiency.
I’ve also read that “Even though the Internal Storage would read 2GB (or whatever is your partition size), the apps would still use some amount of REAL INTERNAL Storage for data, hence you need at least 100MB REAL Internal Memory for every 500MB SD-EXT memory.” Is this true? And if so, since I believe the Galaxy ACE S5830 has about 150 MB RAM the most I can actually get is 750 MB RAM?
It is important to get as much RAM as possible because I’ve read that Sygic (the GPS Navigator app) needs to be installed in phone’s RAM to work properly and it is about 700MB.
4. Install Stock ROM
Finally, the time has come to install a new stock rom. I am thinking about MIUI 6. I like its interface and I’ve heard it is light and fast. Any better suggestions? Can I do it in my phone?
My problem here is this, is MIUI a fully functional stock rom, which means I just download it and flash it or is it a “port rom” which means I have to previously install some android 4.4.x base rom? I have read in some article that is needs a compatible android rom to lean on before installing. Is that so?
Here I am stuck, I can’t decide how to proceed and I need your help.
Sorry, if the post is too long.
Click to expand...
Click to collapse
Hi There,
To Root Your Device See The XDA's post.
Take The Backup of Current Rom Using CWM recovery or ROM Manager would do this too.
Then inorder to Increase Memory On Your Device By Partitining the SD Card.
Check My Guide over it in Galaxy Ace Development Section or General Android Dev Section.
If Helped Click Thanks
Hi,
1.
Try always to have on your sdcard a backup or a ROM that works ok.
Probe this a few times to be sure you can return anytime to the previous step.
2.
Take a notepad and make a change log with steps you made, so you can return to the previous step if something is not working ok.
3.
Try first to understand what you want to do, to be sure that you will not commit an error.
Try to learn from the mistakes of others.
It will be much easier for you.
After weeks of hard work we (Setmov and uncle Fab) proudly present you the first Una ROM for the galaxy Tab 7.0 Lite AKA SM-T11, based on 4.2.2 XXUANB2.
DISCLAIMER
As usual, your phone your responsability, we won't take any responsability if it flies out of the window or if your girlfriend/boyfriend runs away with it.
PLEASE, DO READ OP COMPLETELY AND CAREFULLY BEFORE ASKING ANY QUESTIONS, ANSWERS TO MOST PROBLEMS ARE THERE
WHAT IS UNA?
UNA is a new concept that takes security to a new level.
Are you tired of seeing so much blatant, outrageous and shameless invasion of your privacy and data mining hidden behind nice sentences like "enhanced use experience" or "complete integration with the system"? We decided to develop secure ROMs where privacy means just that – Private!.
It’s free of charge, we are a non profit structure and we are not here to make big bucks
WHAT UNA ISN'T
UNA isn't a way to help you stealthily buy massive destruction weapons to foment a coup d'etat in your favorite banana republic or to prepare the third world war.
UNA secures what leaves from your phone (ie your personnal data doesn't leak and no app can look over your shoulder to spy your activities), but it can't completely secure what comes into your phone.
Why is that?
Because it's just not possible to fully secure a phone from what comes into it, and anyone claiming to be able to do it is either a liar, or an ignorant, or both.
There are too many attacks, some not well documented, if documented at all, and some unknown to the public, and there are too many ways to hack a phone, especially if the user doesn't use his/her common sense.
If you are the type of person that installs apps from shaddy source and/or warez web sites (sites offering cracked paid apps) chances are that at some point you will unknowingly install a malware or a spyware. The same applies if you click on any link, specially on SMS' and emails, if you let any pop out window appear or if you don't protect your lockscreen with a password/pin/pattern and let anyone get physical access to your phone.
A bit of judgment and common sense can save you a lot of trouble, but there's unfortunately nothing UNA can do about it.
Then, if you use your phone to call through GSM your provider will know where you are. If he didn't you wouldn't be able to make any call, the signal has to find you and there's nothing UNA or anyone can do about it.
The only way to prevent that is to disable the phone functions (but then your phone will turn into a wifi only device) and reenable them when needed, head to the scripts section to learn how to do it.
Last but not least, bear in mind that the agencies have armies of tech savvy henchmen and 10 storeys computers, and tricks we can't even imagine, so think twice and use your brain before you attempt to outsmart them...
UNA IS FOR YOU IF
. You are willing to learn how to use an unconventional ROM and generally speaking to understand how things work, even if it sometimes requires a little effort to fix this or that little problem (bear in mind that it took us a lot of work to develop Una to where it is now),
. You don't mind a few little occasional bugs here and there that come from all the restrictions the ROM contains,
. You want to take back ownership of your phone from google’s claws.
UNA IS NOT FOR YOU IF
. All that you care about is the latest gimmick in the latest OS,
. You can't live without the google’s apps,
. You are the kind of person that never reads through the OP and only scroll down to the download section, and then complain that things don't work and/or ask stupid questions that are answered in OP.
An example? One guy makes a mod and writes clearly in OP that it's specifically for 4.2.2. Then some people complain: "it doesn't work on 4.4.2"...
ARE WE PARANOID TIN FOIL HATS? OR TERRORISTS? OR CARTEL BOSSES?
Nope, we only are people that don't see why we shouldn't be in control of our phones. Or why our phones can be wiped remotely, why apps or updates or who knows what can be downloaded and installed without asking for our consent, why SMS' can be sent without us to know, why we should pay for the bandwidth used for data mining and unwanted downloads, and why all those activities should deplete our battery and kill our RAM.
You think we are overreacting here?
You don't have to take our word for it, just download and install Network Log from here:
https://f-droid.org/repository/browse/?fdfilter=network+log&fdid=com.googlecode.networklog
Give it root permission, start logging and open some web pages. Come back to Network Log after a few minutes and see for yourself, you'll be surprised (or maybe horrified?) to find out that your android system, your settings, your kernel etc. connect to all sorts of funny IPs, including and foremost google’s.
Now you see what we mean?
It's time to go for Una
UNA'S FEATURES
. Rooted.
. Deodexed.
. Zipaligned.
. Busybox and sqlite installed.
. Init.d support and scripts.
. Auto start disabled for most apps.
. About 150 system apps, 45 framework jars, 15 permissions xmls and 65 libs removed, plus files here and there.
. Very low RAM and CPU consumption, more than 8 hours screen time with the WIFI on.
. Heavily and extensively modified system, in order to make it secure and prevent it from leaking your data.
. App Settings, Firewall and Xprivacy built-in, and already applied out of the box to make sure you are well protected.
. Xprivacy is a fantastic tool but it has one big limitation, it can't restrict the Android System from accessing your serial numbers and leaking it. For that reason these IDs have been edited as follows:
build.serial (androidboot.serialno) and ro.serialno are both set to "1",
android id is set to "android",
net.hostname is set to "1".
. Wlan serial number set to "00000001" (this number identifies you everytime you connect to the internet, and Xprivacy can't do anything about it).
. USB ID (iSerial) set to 1.
. Unreadable cp access.
. Vulnerabilities patched thanks to Master Key Multi Fix and Fake ID Fix.
. ADB disabled (can be re-enabled, see below).
. By default ADB and the Live Wallpaper Picker app are disabled. Using the provided scripts you can re-enable some or all of them, and you can restrict all google access (including youtube, blogspot and google search), the Media Storage/Provider app and more, instructions are in the "HOW TO USE THE ROM" section.
. Plenty of under the hood modifications to make the ROM fast and fluid.
. Multi-purpose navigation keys.
. Call button in contacts.
. Because secure doesn't mean ugly, the whole ROM has been themed in black holo to replace Samsung's light holo theme, with a beautiful green color for keys, icons and some text (if there are enough requests other themes will follow), transparency, and Lollipop HD wallpapers.
. Multiwindows have been revamped, they are no longer only static in Samsung style but now they can float and be resized too, like on a computer.
. All apps can be opened in floating mode.
. All apps display in the Flash Bar.
. Possibility to choose between static or floating multiwindows (instructions are in the "HOW TO USE THE ROM" section).
. Heaps of hand picked and carefully scrutinized open source apps.
There are 2 non open source apps (Greenify and Quick Pic) but they are safe, believe me, I have thoroughly examined them. Still, you can always uninstall them if you feel like it.
In time we will develop our own apps, but first we want to see how people respond to the Una concept...
Installed apps/tools
. 920 Editor, to create and edit scripts or text files.
. AF+ Firewall.
. Alarm clock.
. APG, to encrypt messages.
. App Settings, to restrict apps' permissions, change DPI on a per app basis and more.
. Arity, a calcultor.
. Conversations, a secure and encrypted chat, modded by uncle Fab for increased security.
. Fdroid, an alternative to the Play Store, and all the apps are open source!
. Floating stickies, to make small notes on the fly.
. FTP Server, to copy files to/from your phone wirelessly.
. Ghost Commander, a very powerful dual panel root file manager.
. Gravity Box, a theming engine.
. Greenify, to make apps behave by hibernating them when not in use.
. K9 Mail, an email client.
. Kernel Adiutor, if you feel like playing with kernel tweaks (but you have to know what you are doing).
. Lightning, a fast and light weight browser.
. Network Log, to check where your apps connect and chase unwanted connections.
. Open Camera.
. Tor (Orbot) for Android, modded by uncle Fab for increased security.
. Orweb, a browser designed to work along with Tor.
. OS Monitor, to monitor and kill your phone's processes, and more.
. Pale Moon, based on Firefox for Android, for a full desktop experience with Mozilla add-ons preinstalled for enhanced security.
. PDF Reader.
. Preferences Manager, to edit the otherwise difficult to read shared_prefs files in data/data.
. Quick Dic, a good selection of free dictionaries.
. Quick Pic, a Gallery app.
. Search Light, a torch.
. Terminal Emulator, fire up your commands and show your phone who is the boss!
. Text Secure, a secure and encrypted SMS app, modded by uncle Fab for increased security.
. Tint Browser, another fast web browser.
. Urecord, to record sounds with different sample rates.
. USB Mass Storage Enabler, to connect your phone to any computer (note that it only mounts the external SD).
. Viper4Android FX, a powerful sound enhancer.
. Viper4Android XHiFi, some more sound enhancements.
. VLC, a video and music player favourite.
. WI-Fi Privacy Police, to secure your connections even better than they already are.
. Xposed Installer, a great framework that enables apps like App Settings or Xprivacy to work.
. Xprivacy, last but not least, the best privacy app.
INSTALLATION
As usual, make a backup first!
Do backup your contacts and whatever is important because all your apps and data will be erased (your sd card contents won't be deleted though).
Do backup your /system/csc folder, in case you need it for later.
Do backup your efs folder (VERY IMPORTANT).
Open an android terminal from your phone, first type "su" (without the quotes), enter, then type:
busybox dd if=/dev/block/mmcblk0p4 of=/sdcard/efs.img
This will create an efs backup caled efs.img in your sd card.
If you need to restore it, make sure the efs.img is in your internal sd card and type:
busybox dd if=/sdcard/efs.img of=/dev/block/mmcblk0p4
Before you install the ROM, you need a working custom recovery.
Philz is the best since AFAIK it's the only one that allows you to lock you recovery with a password (highly recommended, if your recovery is not password protected it wouldn't take more than 2 minutes for someone to disable your pattern or pin protected lockscreen and access all your personal data on the phone).
Alas, the Philz version for the T111 doesn't work properly (if there are enough users request I may build a working Philz) so for now you'll have to install TWRP from here:
http://forum.xda-developers.com/gal...sm-t110-kernel-sources-twrp-bootloop-t3060819
Don't forget to thank @ paziusss for his work!
TWRP installation instructions
You need to have Samsung drivers installed.
Boot your phone into download mode (press volume down and power at the same time).
Open Odin 3.07 and connect your phone.
Click on the PDA slot, navigate to where the TWRP recovery is located and select it.
DOUBLE CHECK AND MAKE SURE THAT "RE-PARTITION" IS UNTICKED (only "Auto Reboot" and "F.Reset Time" should be selected).
Click start and wait while Odin flashes TWRP.
If everything went well your phone will now auto-reboot into the system. Go into recovery, you should see your brand new TWRP.
If you are still on stock recovery then repeat the above steps, but this time untick “Auto Reboot” in Odin.
When in recovery, if before you reboot you see a text on the screen displaying “yes – disable flash recovery”, select it to avoid stock recovery overwriting TWRP.
Now, download Una from here (scroll down until you get to the download section):
http://unaos.com/
Unzip the file and copy it to the backup folder that is inside the clockworkmod folder in your sd card (if there's no backup folder create it by choosing "mkdir" in Ghost Commander).
Boot into recovery.
Go to restore from sdcard, choose 2015-03-29--13-45-53 JDQ39.T111XXUANB2 and go for it!
IMPORTANT!!!
In case you had previously installed one of those Knox plagued ROMs (maybe some of the latest 4.2.2 ROMs?) you'll have to choose custom restore and uncheck boot in the menu, because since the bootloader you have is Knoxed you may get a brick if you downgrade it to a pre-Knox version, don't play with that!
If you choose to proceed, you do so at your own risk, but in any case first read through XDA's forum to find out if it's doable.
If it doesn't work for you then I'm sorry, you are out of luck, shame on you Knox...
If it works please report it here so that other people will know, thanks in advance!
Once it's done reboot, congratulations, you have installed Una ROM on your phone!
HOW TO USE THE ROM
. Swipe down to access the applications drawer.
. Swipe up to turn off the screen.
. Go to settings and set a lockscreen (recommended).
. Go in recovery and set a recovery password (recommended).
. Long pressing on the menu key toggles expanded desktop (full screen, no more navigation bar and no more status bar).
. Double pressing the menu key kills and hibernates the current application.
. Long pressing the recent key brings you back to the last application (convenient to switch from one app to another).
. Between the home and the back key there's a supplementary key that can display up to 12 apps (editable in gravity box).
Double pressing that key shows the sound panel, long pressing it shows the reboot menu (note that there's an option to take screenshots in the reboot menu).
. Go to /system/etc/security/cacerts, check the certificates that are there (you'll find the certificate's name approximately by the middle of the file), and erase the ones you don't need/like.
When you want to transfer files to/from your phone open the USB Mass Storage Enabler app and enable mass storage, that's it. When you are done, don't forget to eject your phone from the computer.
. When you install a new application, by default it will be fully restricted in both Xprivacy and the Firewall.
Before you open the newly installed app wait until the Xprivacy icon appears in the status bar, then and only then can you open it.
Most likely the app will crash.
Go to Xprivacy, open its settings and then usage data, you will see what restrictions caused the crash. Re enable some, provided that they are not too invasive.
Many apps require "load.Library" to be allowed in the shell section, that's ok.
Others may need to access the sd card, that's in the storage section and it's ok to allow it for apps that really need to access the storage, like players, cameras or file managers (for other apps try to keep it restricted).
Root apps obviously need "su" and/or 'sh", and sometimes "exec", in the shell section.
Always try to enable as few fields as possible, and bear in mind that data requested by an app is not necessarily needed for that app to work (especially true for identification, internet and mcc/mmc access).
Lastly, give the app internet access in the Firewall if, and only if, it needs it, and restrict some more permissions in App Settings.
If you can't tame the app consider uninstalling it and look for a similar one that has less built-in spyware.
SCRIPTS
. As said above, by default ADB and the Live Wallpaper Picker app are disabled.
If you want to re-enable some or all of them, open the script folder located in system/etc, click on the desired script and choose edit.
Copy the whole text and paste it in the Android Terminal, voila, the script is automagically executed.
. You will see more scripts, to disable/enable ADB, the Bluetooth, the Media Storage, all google access (including youtube, blogspot and google search) and the Phone (that will turn your Tab into a wifi only device and make it much more private since the phone modem is closed source and thus unsafe).
If you disable the Phone and later want to re-enable it do as follows:
untick App Settings in Xposed's modules section, re-enable Phone, reboot, then enable App Settings again.
. Some scripts enable you to backup/restore your efs partition, you do what you want but backing up your efs comes highly recommended.
If you need to restore it, make sure the efs.img is in your internal sd card before you run the script.
. Other scripts can enable/disable am and pm, but don't play with it unless you know what you're doing.
. You can uninstall the Live Wallpaper Picker, the Wallpaper Chooser and the Media Storage if you want, or keep them disabled and resurrect them when needed.
. If you are very privacy concerned you should consider using the "uncle's phone lite" mod because it enables you to call with only the Phone and the Telephony Provider apps (CSC, Contacts, Contacts Storage, Logs Provider and STK are completely de-activated). That's the method I use to make calls, but you have to know that the dialler forces close after you complete the call (not a big deal in my opinion but still, I may look into it one of these days). You'll find the mod in the add-ons section.
. I forgot to add the scripts to enable static or floating multiwindows, you'll find them in the add ons section.
Unzip the file, you'll see 2 scripts.
Put them in the system/etc/script folder, give them rwx, rx, rx permissions (755) and run the one called "static_multiwindows_t111".
Reboot, you are back to stock static multiwindows but now you can make multiwindows templates (look for the cross below the edit button), and the good thing is that those templates will stay if you switch again to floating multiwindows.
If you want your windows to float again run the script "floating_multiwindows_t111".
ENCRYPTION
If encryption is your thing we have you covered with the following installed apps:
APG, Conversations, K9 Mail and Text Secure.
BUGS
. There are a few minor UI inconsistencies due to the black holo theme, it will be fixed in the next release.
. When you are in the dialer app you can access the call log and the contacts, but don't press favorites. If you want to access them press contacts first, and then favorites.
. For some reason the ADW Launcher doesn't allow transparency in the navigation and the status bars, I'm working on it.
. Network Log app doesn't work, it's not an Una bug but a limitation in the T111's kernel (some modules are missing).
If there are enough users' requests I'll tweak the kernel and add the missing stuff.
. You can't download anything from Lightning and Tint Browser, that's because the Download Manager and the Download UI have been uninstalled. If you need to download something, copy the link and paste it in Pale Moon, it has its own download engine.
. All the installed apps work, but other apps you install may crash. I call that kind of apps "google’s henchmen", they only work if the play store services or the bla bla app are installed and of course they won't on Una since all that garbage has been removed.
If I install your app, why do you want to force me to install your boss' app too? Forget about those apps and search Fdroid, you'll find what you need...
. Depending the way you use your phone you may have to fine tune Xprivacy and reenable some permissions, I'm sorry for the inconvenience but it's impossible to set Xprivacy for all users since we all have different ways to use our phone.
ADD-ONS
. Uncle's themed Sony keyboard, flash it in recovery. It's not open source and that's why it's not included in the rom by default, but it's my every day keyboard because it works fine and because I themed it to make it look nice.
. Uncle's phone lite (with clipboard and dialer) for hardcore users. It's safer than using the regular phone configuration, but the dialer forces close when you hang up the call. Flash it in recovery, wipe dalvik-cache, reboot.
. Completely disable internet access for the Android System. Lightning and Tint Browser won't connect anymore since they use the same web engine as the Android System (that is anyway not very safe in 4.2.2), but Pale Moon still works thanks to its build-in web engine. Flash it in recovery, wipe dalvik-cache, reboot.
. Holo Light Theme
In case you don't like the black Holo Theme we use for the ROM, here's the stock Light (white) Hole Theme. Flash the zip in recovery, clear dalvik-cache, reboot.
Add-ons are here (scroll down until the download section, then in the download page scroll down a bit until you see the add-ons link on the right):
http://unaos.com
UPDATES?
There will be some, but only if there is enough users' feedback. No ETA though, you'll have to be patient because now we have to design and release Una for many other phones.
Still, any suggestions/comments/bug reports are welcome, help us to improve Una!
FEATURE REQUESTS
Yeah, sure, we'll see what we can do but we don't promise anything
That's all for now, enjoy the ROM!!!
The Una team
CREDITS
Big thanks to:
F-Droid
M66B (Xprivacy)
Rovo89 (Xposed)
Tungstwenty (App Settings, Master Key, Fake ID Fix)
Ukanth (AF+Firewall)
Jecelyin (920 Editor)
Kraigsandroid (Alarm Klock)
Thialfihar (APG)
Arity (Arity calculator)
Siacs (Conversations)
Ppareit (FTP)
Ghost Squared (Ghost Commander File manager)
Mohammad Adib (Floating Stickies)
C3C076(Gravity Box)
Oasisfeng (Greenify)
K-9 Dog Walkers (K9 Mail)
Grarak (Kernel Adiutor)
Anthonycr (Lightning)
Pragmatic Software (Network Log)
Mdwh2(Open Camera)
The Guardian Project (Orbot and Orweb)
Eolwral (OS Monitor)
Moon Child and Cyansmoker (Pale Moon)
Droidapps (PDF Reader)
Simon Marquis (Preferences Manager)
Thad Hughes (Quick Dic)
Q-Supreme team (Quick Pic)
Search Light (Search Light)
Jackpal (Terminal Emulator)
Anasthase (Tint Browser And Tint Browser Adblock Addon)
Thomasebell (Urecord)
Mohammad Abu-Garbeyyeh (USB Mass Storage Enabler)
Zhuhang (Viper4Android FX and Viper4Android XHiFi)
Videolan.org (VLC)
Brambonne (Wi-Fi Privacy Police)
Paziuss (working TWRP)
TWRP team
surprised.
i m bit surprised with this , cause wasnt expecting somebody 2 make rom 4 this tab, firstly i will try said twrp zip,presently on dr. ketans rom having stock recovery [shame].
thanx 4 efforts time. thinking about yr warning [knox thing i dont want brick,but not cleared soft bick or hard brick]
Nice to see that you are surprised, or well, I hope it s a good surprise.
I m not very familliar with this Tab since I don t own it, but what i know is that problems with Knox come from the bootloader.
In order to avoid it do as follows:
make a backup of your current rom,
flash UNA rom by doing a custom recovery (as I explained in OP) and only restoring system and data (untick boot), cuz even in the worst scenario, that is that the rom won t install, you won t brick your tab since you didn t touch the bootloader and all you ll have to do is to restore the backup you made previously...
In any case try the TWRP from the link I gave, it works flawlessly (I know about the other TWRP, it didn t work well since it was meant for the wifi only model).
And don t forget to report here how it went, thanks in advance!:good:
couldnt locate new twrp zip in download folder
couldnt locate new twrp zip in download folder will try again tommarow.
Great Work.
i like the rom but because of that blue color i don,t want this rom. it makes me feel bad.
can you guy,s change it to white.
(it might be due to diffrent types of vision people have so maby it,s worse for some one and good for some one els)
Holo Light (white) Theme added, check OP in the add-ons section.
can i flashthis rom in odin ???
i cant locate twrp zip in computer.
It's works on T110?
Edit: Yes, it's works on T110. Thanks for share .
Can I install on SM-T110?
Im getting mismach error, any suggestion?
YES its working rom on sm t 111, confirmed. thanks but without gapps & all i seriously doubt how many will use it but neverthles u ppl gave us a working rom that i appreciate
I like the idea of excluding 'Google \gapps' I am waiting to get my hands on a tab7 lite and give this a go. I would like to remove all the junk from the ROM on this Asus tablet. I will tinker with it when I get the Samsung.
Can you give a Google Apps for this room or just the Google Play? I tried install one gapps package but it broke all.
nexbr said:
Can you give a Google Apps for this room or just the Google Play? I tried install one gapps package but it broke all.
Click to expand...
Click to collapse
@nexbr, we can't help you! If you had read the OP, then you would seen that this rom is "privacy and security" oriented, so no gapps at all. It has been tweaked this way, to get rid of all the google stuff. No gapps and no gapps installation ever.
Thanks for this great rom (do you have some sort of guide on porting it to other devices; I would love to help)
Why is adb disabled by default?
adb over usb should be safe enough, you can always disable usb debugging on the phone...
I really like the samsung SM T-111 default keyboard, can we install it keeping it from internet access and so?
can't locate the unaos folder for recovery.
At restore step I'm unable to locate the folder (unzipped folder of unaOS).
How did you guys manage to install this with TWRP? The install doesn't work for me when I'm in the TWRP recovery and point to the zip file.
may i use it on my T110
Can someone guide me where to download this ROM from?
The page on UnaOS doesn't seem to support the download link any more - https://www.copy.com/s/O67vsTVdSO7bTyR1
can you teach how to install both twrp and una and twrp download link for sm-t111
Hello,
I'm a beginner lost in reading all the useful information on this forum.
I started with the idea to reduce the permissions of applications of my Razr I.
Google pointed to this http://www.xda-developers.com/protecting-your-privacy-app-ops-privacy-guard-and-xprivacy/
And I'm really happy and surprised about all information I can find here, thank you that much for
making this possible to all of you!
As today I feel ready to start playing around with my phone I wanted to ensure I understood the items right.
May be for you it takes only some seconds to verify my guess and can give a short notice
about Step 2 or 3 is easier to become implemented.
Step 1.) I wanted to do a full backup before I start, following this thread:
So I'll install ADB on my PC and run "adb backup -f FullBackup.ab -apk -all"
This works on a Razr I with 990.43.74.xt890.Retail.en.EU - of the shelf and is not risky at all - or?
Could you pls. tell whether it is really true I can switch back to my backup if I'm not happy with my System?
Step 2.) My first intention was to root my device and install Xposed framework
http://forum.xda-developers.com/showthread.php?t=2299428
http://repo.xposed.info/module/de.robv.android.xposed.installer
And to use Permission Master out from google play store
First of all I wanted to ask you whether this is feasible technicaly and esp. for a beginner?
Alternative to Step 2 Step 3?
Step 3.) In general I'm happy with my Razr I Android 4.4.2 (990.43.74.xt890.Retail.en.EU)
But I'm wondering whether it would be easier or has less risk to use a custom ROM instead of implementing Step 2.
By reading in this forum I found out there is a planty of features FM-Radio, enhanced stand-by current ,
to get rid of preinstalled aps and so on.
I'm an embedded developer but do not have the overview about the architecture of Android devices, what I got so far is:
There is a bootloader which needs to be changed from OEM closed to open.
There is a boot partition I flash ROMs in.
I need some tools on my PC combined with SDK and Motorola drivers to allow a USB-Debuging and flashing.
And sure as always once your bootloader is damaged you are lost, so I understand even backup will not help here.
So I'll keep my fingers crossed.
Thanking you in anticipation and pls accept my excuses about my english and stupid beginners questions.
Best Regards
gonso
PS:
As I main entry point I used the
http://forum.xda-developers.com/razr-i/general/index-razr-t2832722
from there I'll try to get ADB, drivers etc.
Hi GonsoXDA,
Step 1: I have never used it. Didn't even know that it existed. On the internet there are numerous people who uses it and it seems to work. Maybe someone else can give some info about this or just try it. U can try it with a non-important app and see if it works. Just backup it, delete it and restore it.
Step 2: This works just fine. But do know 3 things:
1. First root: To get root on stock rom, u need to use kingsdroot methode afaik. And that one sends your IMEI to some rare ip adress. I personnaly don't trust this and stay away from it, but there are many people who use it.
2. Xposed requires a recovery to install the framework. It can be done mannually or by the app i suppose. With only root u don't have a recovery on your device that can perform such action.
3. If something goes wrong only a full restore with RSD-Lite can most of the time help u out. Because u don't have a recovery that works than.
Step 3: We only have 2 full roms. 1 for JB (stock) and a working CM11 rom (kitkat).
Only the Jellybean roms support fm-radio, on every newer rom fm-radio is cut out of the audio firmwares. The risk of going to this is even less as Step 2, because u can do a full backup and restore of ur phone. ( I would chose for this if u want to play a bit with the phone and ur warranty is already out of years)
The gereneral idea about the android architecture is this (it is different for almost every device and the Razr I has many more thing to hold into account, but if u are here only for the roms and xposed, there is no more to know):
Bootloader: Is like an uefi bios for PC, but then for android. It also contains fastboot
Bootimage(boot): Has all the info like kernel and ramdisk to boot the system
Recovery: Is like 'boot', but boots into the recovery partition that lets u change every aspect of the device if u know how. Its mainly used to flash a custom recovery to, backup and restore a nandroid backup and flash/wipe roms, mods, (all/specific) data and packages.
Systempartition: Is the system the boot boots into. It's android.
Datapartition: Where all the user data is stored.
Cachepartition(dalvik): Where all cache is stored and in earlier android versions also dalvik. But not now anymore.
Fastboot: To flash/wipe the above partitions and many more (needs drivers)
Adb: To push, pull, command things in system or recovery (needs drivers)
Sdk: contain the abd and fastboot packages, but aren't needed for adb and fastboot because with the right drivers can work on there own (see the internet)
If u have a custom recovery and only change things on the system, data and cache partition there is almost no way to damage the phone. There is always a backup through recovery. As long as u stick to the things u can do in recovery.
The only thing tha can mesh up your phone beyond repair is doing wrong stuff withint the bootloader and other inner parts in the phone(like i did to get newer kernel working) or u are in bad luck and you internal memory blocks. See 'Super brick samsung phones' (emmc error).
I suggest:
- Unlock your bootloader
- Install custom recovery
- Make a backup with the recovery
- Do what u want, xposed on stock rom, try CM11?
- If things won't boot, restore through recovery
And always, read up before doing anything. There are thousands of articles about android, flashing things, repairing android, using adb and fastboot. AND ALWAYS HAVE A BACKUP PLAN!
Hello,
always having a backup seems not to be that easy.
So I unlocked my boot loader and tried to install twrp2850 and twrp2860 via mfastboot.
The mfastboot with 533.353kB caused the following "(bootloader) Variable not supported!"
I rebooted into bootloader and tried recovery -> horizontal Android man with a red !-rectangle
After reboot to normal power up my phone seems to be in factory reset, all my data is gone :crying:
ok crying dosn't help so I looked around and tried with another mfastboot 186.178kB and recoverycwm6.0.5.1.4.img.zip
http://forum.xda-developers.com/showthread.php?t=2441224
The twrp I tooked from here: http://forum.xda-developers.com/showthread.php?t=2278483 seems not to work.
I did a backup with cwm is there a change to get back my data? I think I know the answer.
In the meanwhile I installed
http://forum.xda-developers.com/razr-i/development/rom-unofficial-cyanogenmod-11-t2966855
And will try to install
http://forum.xda-developers.com/xposed/modules/tool-installer-xposed-installer-zenfones-t2983589
Thank you for the help, work and excuse the stupid beginner posts.
Regards
gonso
gonsoXDA said:
Hello,
always having a backup seems not to be that easy.
So I unlocked my boot loader and tried to install twrp2850 and twrp2860 via mfastboot.
The mfastboot with 533.353kB caused the following "(bootloader) Variable not supported!"
I rebooted into bootloader and tried recovery -> horizontal Android man with a red !-rectangle
After reboot to normal power up my phone seems to be in factory reset, all my data is gone :crying:
ok crying dosn't help so I looked around and tried with another mfastboot 186.178kB and recoverycwm6.0.5.1.4.img.zip
http://forum.xda-developers.com/showthread.php?t=2441224
The twrp I tooked from here: http://forum.xda-developers.com/showthread.php?t=2278483 seems not to work.
I did a backup with cwm is there a change to get back my data? I think I know the answer.
In the meanwhile I installed
http://forum.xda-developers.com/razr-i/development/rom-unofficial-cyanogenmod-11-t2966855
And will try to install
http://forum.xda-developers.com/xposed/modules/tool-installer-xposed-installer-zenfones-t2983589
Thank you for the help, work and excuse the stupid beginner posts.
Regards
gonso
Click to expand...
Click to collapse
Than u know the answer, it is no I think.
Both twrp images should work just fine, but always chose the latest. The message "(bootloader) Variable not supported!" doesn't do anything So don't worry about that one. There should be a lot more in you log that the message if twrp didn't install. U did extract it and flash it with the command: mFastboot flash recovery <recovery-image>. Where <recovery-image> could be C:/users/*/Downloads/recovery.img.
Hello,
yes sure "The secret of health for both mind and body is not to mourn for the past, worry about the future"
So I use CM11 now for about 2 days and I'm really impressed, so far everything works :good: THANK YOU!!!
As I asked already I installed XPosed and Permission Manager, but I found XPrivacy might be the better solution and switched to this.
(Today I do not have all the technical background to judge whether it is technically equivalent, but I'll investigate on it)
Esp. one thing I'm wondering, why XPrivacy is reading my Contacts once I check the permissions of an app?
But the more important thing I recognized differences between CM11 and the Stock ROM. One is the Entry
"Privacy" in the settings. It seems to be more or less the XPosed and XPrivacy, or?
But it seems the Restrictions are not shared, so I can restrict in the one and do not see the restriction in the other tool.
So first is there a risk to use both, is it useful or just doing the same twice.
Thank you
Gonso
gonsoXDA said:
Hello,
yes sure "The secret of health for both mind and body is not to mourn for the past, worry about the future"
So I use CM11 now for about 2 days and I'm really impressed, so far everything works :good: THANK YOU!!!
As I asked already I installed XPosed and Permission Manager, but I found XPrivacy might be the better solution and switched to this.
(Today I do not have all the technical background to judge whether it is technically equivalent, but I'll investigate on it)
Esp. one thing I'm wondering, why XPrivacy is reading my Contacts once I check the permissions of an app?
But the more important thing I recognized differences between CM11 and the Stock ROM. One is the Entry
"Privacy" in the settings. It seems to be more or less the XPosed and XPrivacy, or?
But it seems the Restrictions are not shared, so I can restrict in the one and do not see the restriction in the other tool.
So first is there a risk to use both, is it useful or just doing the same twice.
Thank you
Gonso
Click to expand...
Click to collapse
That's a sentence.
Why XPrivacy needs it i don't have a clue. For that sort of things u need to be by the dev of the app.
CM has a lot of features out of the box compared to stock, but stock is most of the time a bit more optimized in terms of proprietary stuff like camera.
So as u noticed, CM had an inbuilt security app. This app (CM) and XPrivacy don't share there settings, so that's the difference u see. But most likely if u disable something in one of the apps it is disabled even tho the other doesn't say it because it doesn't know of it.
I don't think it will be a risk. They both do the same thing, but they don't know about it. To be on the safe side, just use one and restore the other to default. U can always search on the web if they don't get along.
U can now make a full backup, so everything can be reverted and your data should be relative safe.
Hello,
thank you again - I now find the answer by reading in the development part of the forum. For me as a beginner it is sometimes not easy to interpret the discussions there.
If accepted I will use the thread now as a kind of diary, may be some other users will have similar destinations and my learn from my mistakes.
So to answer my question a little more detailed, but with less background know how than Hazou. Pls. do not trust me I'm a beginner, I have not analyzed the code just the behavior - feel free to correct or contradict my words!
The XPosed is in the area of permissions just a framework which allow other modules to put some code between an app requesting permissions and the Android core granting this permissions. The Xposed it self doesn't handle settings or permissions you did in modules like the CM Privacy, Permission Manager or XPrivacy.
As a result I came to the same conclusion it is not a risk, but an overhead to have more than one pice of code between the app requesting permissions and the Android core. -> My proposal: Do not use more than one of this Permission control apps in parallel.
From the privacy perspective the Permission is just a starting point, it allows you to hide your private information from the app. On the other side many apps will need access to the data to work and most of them are able to connect to the internet.
So I realized the next step would be the restriction of internet usage of apps. Here permissions are sword but we need a scalpel, to separate the necessary from the unwanted connections. This scalpel could be AFWall+ and "Netzwerk Log", this is a firewall and a sniffer.
What I can say to day the apps run on CM11 installed on my Razr I.
So it looks like I see my destination raising on the horizon and I will try to formulate it in the following order:
1.) Hide Contacts, Calls and SMS from Apps who do not need this to work -> XPrivacy
2.) Disable some Android features I think I don't need.
(e.g. Captive Portal Check - settings put global captive_portal_detection_enabled 0)
3.) Restrict the internet access of some apps to servers they need to connect. ( e.g. E-Mail client is restricted to connect to the mail server)
4.) Limit the access to my pictures, stored on SD card. [I have not found a solution so far]
If you read this I think 1 is reasonable for most of you, even if you do not have deep Android or Network know how (as I have), you just restrict the permissions - if app crashes or doesn't do the job you expect you may permit access or uninstall the app. (XPrivacy allows you also to fake data)
3 is a usual task of a network administrator, if you are used with iptables it is just work. I'll try to find out whether there is somewhere a source of "Templates". Usually the network admins share there common settings based on services, once I find out I'll post.
To restrict the access to SD Card I only see the change to extend the sandbox of Android to the SD and to hide files which does not belong to the app. As I would store my pictures on SD as I would store my Navi Data, but neither the Navi app should see my pictures nor the Cam and Gallery my Navi Data. ...
I don't know whether there is an app out there but It should be possible the same way like XPrivacy fakes the other data.
Thank you
Gonso
Hello,
Most of the time I used the numbers to just put in the extension, so if I want to call 0049 9876 54 321 I put the numbers 321 the Motorola dialer will show a list of all contacts where the number contains 321.
Some Numbers of contacts are not shown as well, seems if a contact has more numbers only one or two are shown.
The CM11 dialer doesn't show the number, is there a setting to get this feature?
I tried to get my Stock dialer back, so I copied dialer.apk from stock into the /system/sec-app/ directory of the CM11 and restarted the phone -> doesn't change the dialer ....
Any proposals? I'm terrible sorry for my stupid questions, I read several threads and still no idea about a possible solution
Gonso
PS: CM11 file manager shows a secure storage /storage/emulated/0/storage/secure - what is the algorithm used for the encryption.
gonsoXDA said:
Hello,
Most of the time I used the numbers to just put in the extension, so if I want to call 0049 9876 54 321 I put the numbers 321 the Motorola dialer will show a list of all contacts where the number contains 321.
Some Numbers of contacts are not shown as well, seems if a contact has more numbers only one or two are shown.
The CM11 dialer doesn't show the number, is there a setting to get this feature?
I tried to get my Stock dialer back, so I copied dialer.apk from stock into the /system/sec-app/ directory of the CM11 and restarted the phone -> doesn't change the dialer ....
Any proposals? I'm terrible sorry for my stupid questions, I read several threads and still no idea about a possible solution
Gonso
PS: CM11 file manager shows a secure storage /storage/emulated/0/storage/secure - what is the algorithm used for the encryption.
Click to expand...
Click to collapse
Stock CM dialer doesn't have that function afaik. The moto one doesn't work because it needs the Moto framework to work. Just download a dialer U trust from the playstore.
I don't have any clue about the secure storage, sorry.