Hey guys I'm just wondering if someone could send me their version of Rogers Captivate CSC file, because I just flash my phone back to Eclair and now when I plug it, Kies says "This Version of device cannot be updated". And the CSC Version is JI2(KOR). Please can someone help me out.
http://forum.xda-developers.com/showthread.php?t=979133
Doesn't work
studacris said:
http://forum.xda-developers.com/showthread.php?t=979133
Click to expand...
Click to collapse
I flashed it with this one also and this one csc verison is unknown. The firmware does even shows up on Kies.
Fix my own problem. I also had to modify the nv_data.bin to fix my product code and now it works perfectly, kies recognize my phone.
Sent from my SAMSUNG-SGH-I896 using XDA App
Nick0703 said:
Fix my own problem. I just had to modify the nv_data.bin and now it works perfectly, kies recognize my phone.
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
Did you follow a guide to do this? Im having the same issue
The CSC UNKNOW FILE FIX
erbsmokah said:
Did you follow a guide to do this? Im having the same issue
Click to expand...
Click to collapse
Ok here is what you need to do.
1. Flash your captivate with this stock 2.2 Rom. This one will remove the AT&T boot logo. And when flashing do make sure to check the repartition box and use the pit file
Files:
Rogers 2.2 ATT Free
Pit File
2. When you finished flashing, go to the phone dialer and dial *#1234#, if your CSC Version is unknow then put the phone back into download mode. And flash this 2.2 Rom, this one contains the missing CSC file version and make sure to only check the PDA on Odin3 and don't use the pit file and uncheck the Re-Partition box!!!!!!
When finish flashing go the dialer and dial *#1234#, to see the csc version: I896RWCJL1. And connect to kies to see if your phone is recognize. If your having problem PM me.
Files:
Rogers 2.2 Missing CSC
Thanks, I'll give it a shot..
worked like a charm thanks!
I tried to modify the NV_Data.bin myself but the guide is for i897 models, which are the same but not so it wasn't working.
Now im ready to take the official update if rogers ever pushes it.
erbsmokah said:
worked like a charm thanks!
I tried to modify the NV_Data.bin myself but the guide is for i897 models, which are the same but not so it wasn't working.
Now im ready to take the official update if rogers ever pushes it.
Click to expand...
Click to collapse
So everything is working, Kies regconize your firmware now?
Sent from my SAMSUNG-SGH-I897 using XDA App
Make sure you properly modify the NV_Data.bin, or else when you connect to kies it's going to say for the CSC version: JL1 (ATT). If you need help modifying the NV_Data.bin, I'll help you with it.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had already modified it but was still getting CSC : Unknown, after flashing the new rom it began to work as it should.
erbsmokah said:
I had already modified it but was still getting CSC : Unknown, after flashing the new rom it began to work as it should.
Click to expand...
Click to collapse
Glad I could help.
Related
Does anyone know a proven method to restore my product code through the nv_data file in the efs folder? Like many who flashed to Froyo on here, My code is showing as HKKOR and should be back to stock HKOPS (Australia). Or any other way if possible.
If not, will I be able to update to the official Froyo through Kies when it's released?
If you are with Froyo, Flash multi CSC JP3 through ODIN and select your area will set your Product Code. It worked for me.
use root explorer and delete both your nv_data.bin and nv_data.bin.md5 files and reboot.
correct product codes will be recreated from your .bak files.
kies checks your product code before upgrading, but there are patcher programs to take care of that, if you want.
both topics have been discussed to death previously, I kindly suggest you do some search before posting next time.
That sounds like it might work. Do you have a link for that JP3 Rom? and does it have to be JP3.
I had just flashed back to a clean JG4 just need to restore that product code.
Sorry, I just see that you're from Australia requiring OPS csc file.
JP3 csc file will not include Australia.
You have to find a multi csc file that include your area code.
Multi csc file ask to choose area amongst several, then when choosing correct area it set this area into the product code.
Hey guys, please, i have one btw question:
I have unbranded and unlocked product code I9000HKDDBT (Debitel,Germany), but i want put firmware XFJP7 with Multi CSC XXJP7 wich have Croatian APN settings...Can I make this without any dangerous ? At this moment im on firmware in my signature wich is not for my prod.code too, but fw work like a charm, and with staying my original product code in nv_data.bin without restoring (original from stock firmware).
Or: Can I put only Multi CSC XXJP7 with Odin (without PDA and MODEM files) on my presents (XWJP6) firmware?
P.S. What i must care, i will not to stay without Download and Recovery Mods (3-comb buttons) ?
Forwarding thanks on answer
Regards
MPM86 said:
That sounds like it might work. Do you have a link for that JP3 Rom? and does it have to be JP3.
I had just flashed back to a clean JG4 just need to restore that product code.
Click to expand...
Click to collapse
See this post : http://forum.xda-developers.com/showthread.php?t=787163
also found this :
http://forum.xda-developers.com/showthread.php?p=9352031#post9352031
MPM86 said:
That sounds like it might work. Do you have a link for that JP3 Rom? and does it have to be JP3.
I had just flashed back to a clean JG4 just need to restore that product code.
Click to expand...
Click to collapse
JP3 is seriously old rom.
dupel said:
JP3 is seriously old rom.
Click to expand...
Click to collapse
I know, badly. I'm just trying to prepare for the official froyo when it hits. I have a feeling it will be a disappointment, then I'll be back to a rooted JPO or something. I was still on JPK
Sent from my GT-I9000 using XDA App
Hi guys,
Yesterday i tried to install version 2.3.3 from samfirmware on my Galaxy S (Stock 2.2.1), but came to realize that some features was not in my language (Danish).
I wanted to go back to my stock firmware, but i've tried different guides to bring it back to stock with 2.1 and then upgrade it through KIES to 2.2.1.
But none of the guides I found worked for me as KIES kept saying that "This device's version can not be updated". So ultimately I went back to the 2.3.3, but now I have no service at all.
I have no idea what to do anymore and I hope someone here can help me out.
Did you check your apn settings? If you don't gave an apn set up then you won't get data. Search for the settings of your carrier.
Sent from my Iphone killing I9000
I can only find settings for internet and mms for APN... There are no settings for getting a signal.
If it is telling you that it can't be updated, it means either the PDA, CSC or Modem are not what it considers stock for you.
You can use one of the many Kies spoof methods found here at XDA, or just forget about Kies and cook a new 2.2.1 ROM in Doc's Kitchen, making sure to load in a Danish CSC.
Your connectivity problems are likely due to an incorrect CSC or as Joel suggested, your APN settings being wrong/missing. Hopefully flashing a proper CSC would fix that.
If the problem persists you could check to make sure your bandwidth options are correct, using the secret code found in SGS Tools to change them.
madskl said:
I can only find settings for internet and mms for APN... There are no settings for getting a signal.
Click to expand...
Click to collapse
Those are all you should have.
What happens when you try to search for networks?
Sent from my Iphone killing I9000
joelhon said:
What happens when you try to search for networks?
Sent from my Iphone killing I9000
Click to expand...
Click to collapse
When i try to search nothing is found
Ok maybe start with your SIM card. If you have another device to check it in. Don't laugh but I once put it in backwords and had a hell of a time finding my problem, because nothing looked wrong until I took it out again.
Sent from my Iphone killing I9000
rschenck said:
If it is telling you that it can't be updated, it means either the PDA, CSC or Modem are not what it considers stock for you.
You can use one of the many Kies spoof methods found here at XDA, or just forget about Kies and cook a new 2.2.1 ROM in Doc's Kitchen, making sure to load in a Danish CSC.
Your connectivity problems are likely due to an incorrect CSC or as Joel suggested, your APN settings being wrong/missing. Hopefully flashing a proper CSC would fix that.
If the problem persists you could check to make sure your bandwidth options are correct, using the secret code found in SGS Tools to change them.
Click to expand...
Click to collapse
This all seems very very complicated.. Is there no easy way to just get back to the stock version my phone had?
madskl said:
This all seems very very complicated.. Is there no easy way to just get back to the stock version my phone had?
Click to expand...
Click to collapse
What was your stock build? You may be able to install it as a deodexed ROM from Ramad using Odin.
As for an easy way, sadly there is no "Make all the bad things go away" option in CWM yet. Maybe next version.
rschenck said:
What was your stock build? You may be able to install it as a deodexed ROM from Ramad using Odin.
As for an easy way, sadly there is no "Make all the bad things away" option in CWM yet. Maybe next version.
Click to expand...
Click to collapse
Problem is i have no idea what stock version i had other than it was 2.2.1.
I've tried different things now (getting another stock firmware), tried the simcard in another phone without problems.
I'm really out of options...
madskl said:
Problem is i have no idea what stock version i had other than it was 2.2.1.
I've tried different things now (getting another stock firmware), tried the simcard in another phone without problems.
I'm really out of options...
Click to expand...
Click to collapse
If you don't know what the stock firmware was I would drop any further attempt to return to it and just move forward.
Go look at the ROM Kitchen thread and follow the very clear instructions there for creating and flashing a 2.2.1 ROM with the right CSC.
rschenck said:
If you don't know what the stock firmware was I would drop any further attempt to return to it and just move forward.
Go look at the ROM Kitchen thread and follow the very clear instructions there for creating and flashing a 2.2.1 ROM with the right CSC.
Click to expand...
Click to collapse
Can you guide me to the correct thread and then I'll try it out. Thanks.
madskl said:
Can you guide me to the correct thread and then I'll try it out. Thanks.
Click to expand...
Click to collapse
Right here...
http://forum.xda-developers.com/showthread.php?t=817703
Good luck.
rschenck said:
Right here...
http://forum.xda-developers.com/showthread.php?t=817703
Good luck.
Click to expand...
Click to collapse
Thank you. My only problem is the small installation guide that is posted there does not work for me. In recovery mode I haven't got the option to install the docrom - all i can do is choose Apply sdcard:update.zip and then theres 2 different kinds of whipe and that is it.
Look you might be best off just using Odin to flash a stock JPO with a multi CSC rather than using the ROM kitchen. The link below is a really good tutorial that will show you how to do it and set your CSC
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sorry its not an xda tutorial but its really noob friendly -its how I made my first firmware flash from eclair
Sent from my GT-I9000 using XDA App
Well the Kitchen Rom didn't work when i finally got it installed.
I went back to samfirmware.com and found the correct stock firmware i had before. After i installed it KIES also tells me i have the latest version.
However I still have no signal. I have the correct Internet and MMS settings in the APN and when i pull down the top menu thingy it says "(No signal) M1" (M1 is my provider), so it seems to recognize the simcard correctly?
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
Used AIO Toolbox and Rogers 2.6 to revert to stock
now Kies has recognized my firmware "finally" but is stating that "S/W is not official version and cannot proceed"
help?
Look in captivate general, its solved.. .
Sent from my SAMSUNG-SGH-I897 using xda premium
2.3.3 rogers captivate odin flashable rom
http://forum.xda-developers.com/show...0#post17885670
root....
http://forum.xda-developers.com/show....php?t=1274566
and solved other ways too... but ALL on page 1
Checked my CSC and it matches what you stated, yet Kies still does not accept my current firmware as legitimate, I am still looking into it
beerbaron105 said:
Checked my CSC and it matches what you stated, yet Kies still does not accept my current firmware as legitimate, I am still looking into it
Click to expand...
Click to collapse
heres what you need : http://forum.xda-developers.com/showthread.php?p=16656437#post16656437
TRusselo said:
heres what you need : http://forum.xda-developers.com/showthread.php?p=16656437#post16656437
Click to expand...
Click to collapse
Or I guess I can still install it via the Gingerbread Rom posted, besides the tar.md5 file, do I need a pit file as well?
beerbaron105 said:
Or I guess I can still install it via the Gingerbread Rom posted, besides the tar.md5 file, do I need a pit file as well?
Click to expand...
Click to collapse
only if coming back from cm7
i have the same problame but i have bada os and wave 1
i didn't flashed or anything i just bouht the phone with the frimware (S8500PTRJH3)
from Orange Israel (Partner) the firmware with hebrew
this is for captivate only.sorry we cant help you with bada OS.
i have a rogers captivate (i896)
i am trying to update the NV_Data.bin because kies shows that my csc is JL1(att)
and i am not allowed to update the phone.
i followed the instructions here http://forum.xda-developers.com/showpost.php?p=17835946&postcount=11 but everytime i edit and try to update the NV_Data.bin file using retrrieve efs and update NV_Data it fails to update and i get JL1(att) again.
what am i doing wrong?
gill0910 said:
i have a rogers captivate (i896)
i am trying to update the NV_Data.bin because kies shows that my csc is JL1(att)
and i am not allowed to update the phone.
i followed the instructions here http://forum.xda-developers.com/showpost.php?p=17835946&postcount=11 but everytime i edit and try to update the NV_Data.bin file using retrrieve efs and update NV_Data it fails to update and i get JL1(att) again.
what am i doing wrong?
Click to expand...
Click to collapse
Dial *#1234# and tell me what it says for CSC.
Sent from my SGH-I896 using XDA App
it says I896rwcjl1
To go "/system/csc" and open "sales_code.dat" in text editor. You should see ATT, change it to RWC.
Sent from my SGH-I896 using XDA App
it already says rwc
so i have flashed back to rogers 2.2
updated the csc using odin without re-partition checked and using no pit file
checked that csc is showing by dialing *#1234#
i rooted the phone
installed busybox from marketplace
put phone in debug mode
used retrieve efs got efs backup
used hex edit to modify nv-data.bin changing both points from att to rwc
saved file and ran update nv-data
turned off debug mode
connected to kies version 2.0.3.11082_152
and still get this version of device cannot be updated
current firmware versionda:JL1 / phone:JL1/ csc:JL1 (att)
what am i doing wrong ?
gill0910 said:
so i have flashed back to rogers 2.2
updated the csc using odin without re-partition checked and using no pit file
checked that csc is showing by dialing *#1234#
i rooted the phone
installed busybox from marketplace
put phone in debug mode
used retrieve efs got efs backup
used hex edit to modify nv-data.bin changing both points from att to rwc
saved file and ran update nv-data
turned off debug mode
connected to kies version 2.0.3.11082_152
and still get this version of device cannot be updated
current firmware versionda:JL1 / phone:JL1/ csc:JL1 (att)
what am i doing wrong ?
Click to expand...
Click to collapse
Did you reboot the phone when you finished modifying the nv_data.bin?
I believe the update NV_data.bat has a spelling error:
adb shell su -c "busybox cp /sdacard/nv_data.bin /efs/nv_data.bin"
After a few well timed screenshots I figured out this was my solution:
I changed incorrect line to sdcard, and moved all the files pulled from phone (including corrected NV_data.bin) from the efs folder to the main folder containing the update NV_data.bat. It wasn't finding them.
Now the NV_data.bin i pull from the phone has the correct code!
Will update in a moment to see if KIES sees it as a rogers FW again.
---------- Post added at 04:38 AM ---------- Previous post was at 04:24 AM ----------
SUCCESS!!! Kies wants to give me an update!
Thought I'd throw my process in fer anyone still having trouble.
1.Flash to Stock with Odin3 1.81 with 2.1 ROM from SGH-I896 wiki here:
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896
2. Flash 2.2 with same method.
3. Do this to fix CRC http://forum.xda-developers.com/showpost.php?p=17461697&postcount=6
4. Do this http://forum.xda-developers.com/showpost.php?p=17835946&postcount=11 ***with my changes mentioned above***
This is what worked for me and I'm updating through Kies right now.
Do i just right click and select edit and modify it ?
i finally got it
i edited the error in the script but it still was not working
so i manually copied over the nv_data.bin and nv_data.bin md5 files to the root of my phone and it worked.
so step by step i went:
stock 2.1 toronto
to stock 2.2
did the csc upgrade with odin using no pit and no repartition
rooted the phone
put phone in debug mode
downloaded the efs using efs backup
edited it using hexedit
edited the update nv_data program so it says sdcard instead of sdacard
turned of debug went into mass storage
copied nv_data.bin and nv_data.bin md5 to the root of my phone
went into debug mode
ran update nv_data
and now kies is updating
a big thank you to Nick0703 and arlichv you guys are awesome thnx for taking time out of your lives to help me
Good show! I forgot to mention abour re-rooting so you can run the NV_data.bin fixes.
Superoneclick worked fine for me.
Whatta bloody process to get back to a REAL stock FW.
Sent from my SGH-I896 using XDA App
Just wanted to mention that JL1 is stock Rogers 2.2 firmware and not AT&T.
Sent from my SGH-I896 running MIUI.
Any talk of AT&T here refers to the left over product code from a previous AT&T based custom rom and not the actual FW itself.
Sent from my SGH-I896 using XDA App