Used AIO Toolbox and Rogers 2.6 to revert to stock
now Kies has recognized my firmware "finally" but is stating that "S/W is not official version and cannot proceed"
help?
Look in captivate general, its solved.. .
Sent from my SAMSUNG-SGH-I897 using xda premium
2.3.3 rogers captivate odin flashable rom
http://forum.xda-developers.com/show...0#post17885670
root....
http://forum.xda-developers.com/show....php?t=1274566
and solved other ways too... but ALL on page 1
Checked my CSC and it matches what you stated, yet Kies still does not accept my current firmware as legitimate, I am still looking into it
beerbaron105 said:
Checked my CSC and it matches what you stated, yet Kies still does not accept my current firmware as legitimate, I am still looking into it
Click to expand...
Click to collapse
heres what you need : http://forum.xda-developers.com/showthread.php?p=16656437#post16656437
TRusselo said:
heres what you need : http://forum.xda-developers.com/showthread.php?p=16656437#post16656437
Click to expand...
Click to collapse
Or I guess I can still install it via the Gingerbread Rom posted, besides the tar.md5 file, do I need a pit file as well?
beerbaron105 said:
Or I guess I can still install it via the Gingerbread Rom posted, besides the tar.md5 file, do I need a pit file as well?
Click to expand...
Click to collapse
only if coming back from cm7
i have the same problame but i have bada os and wave 1
i didn't flashed or anything i just bouht the phone with the frimware (S8500PTRJH3)
from Orange Israel (Partner) the firmware with hebrew
this is for captivate only.sorry we cant help you with bada OS.
Related
Hi All,
I Upgraded my Samsung Galaxy S to Froyo 2.2. All seems well but the performance does not seem all that great as well.
If i want to restore back to the Standard Manufacturer Firmware (i was on JG4) that comes out of the box with the I9000 what do i have to do? Any help here would be appreciated.
Download the firmware from samsung-firmwares and flash your phone with odin. There is plenty of flashing tutorials about to show you how to do it. Although if you managed to update to froyo then you properly already know how to flash it again
Sent from my GT-I9000 using XDA App
Restore
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Ren Hayashi said:
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Click to expand...
Click to collapse
I have the same problem as well, any helps here please?
Alot of the the DXJG4 firmware out there is corrupted.
So, try download DXJF4 from samfirmware.com (and flash with Odin with 513 pit) then uprade to DXJG4 through KIES.
NOTE: If KIES says "Device version's cannot be upgraded". Then you need to change your product code back to "XSO" (Search the forum on how to change product code.... about editing the nv_data.bin file)
My Flash history:
DXJF4-->DXJG4-->XXJPK-->DXJG4
I'm pretty new....
The firmware versions you guys are talking about are I hope, all "software" version and not real hardware chip revisions?
thanks
why dont you just flash your phone with 2.2.1 or 2.3.3(latest).....i know 2.2 is quite unstable FW but 2.2.1 will help a lots......I dont think you need to downgrade the phone back to the stock FW to solve any problem
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk
yesterday i bought galaxy s from Egypt it has android 2.2.1 Froyo when i connected it to kies it says his device cannot be updated i installed Kies2.0 Registry Patcher v.1.8.0.0 now it says there is new update when i click update and it download firmware upgrade components it says again this device cannot be updated
Never liked Kies, it won't even identify my phone, tried every driver, it just hung with "device manager" error or something similar.
so there is no fix for this??
Maybe there is, I just don't use at all
any help???
What country are you in?
Insanity cm 012/glitch
Egypt.....
Maybe there is no update yet available for your phone.
You should wait or flash a new firmware via Odin (Thats what I did because Kies was a pain in the butt)
meresis said:
Maybe there is no update yet available for your phone.
You should wait or flash a new firmware via Odin (Thats what I did because Kies was a pain in the butt)
Click to expand...
Click to collapse
There is an update available and some people already updated there phones
wut is the difference between the official firmware updated by kies and the rom installed by odin ??
on samfirmware i found 3 .pit files which one shud i use??
Galaxy S / .PIT File: DOWNLOAD. (512)
Galaxy S / .PIT File: DOWNLOAD. (513)
Galaxy S / .PIT File: DOWNLOAD. (803)
nvm i got it
I always use the 512.pit
Difference between Odin and Kies: with Odin you can nearly flash everything, with Kies just official Samsung-ROMs.
Sent from my GT-I9000 using XDA Premium App
Lunchbox115 said:
I always use the 512.pit
Difference between Odin and Kies: with Odin you can nearly flash everything, with Kies just official Samsung-ROMs.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
so wuts better?? rom from samfirmware or the official rom by kies??
Hm, there is nearly no difference between official 2.3.3 and inofficial 2.3.4. If you like flashing, flash 2.3.4, if not --> 2.3.3 with Kies.
Sent from my GT-I9000 using XDA Premium App
soudy1994 said:
wut is the difference between the official firmware updated by kies and the rom installed by odin ??
Click to expand...
Click to collapse
The only tolerable usage of Kies for me has been just for the USB drivers on the computer. Always using the ODIn version of the firmware, I can't say for sure but theres no difference in the firmware updated through Kies and ODIN (u can download them from samfirmware.com), but installation through ODIN has always been fast, error free and neat.
soudy1994 said:
on samfirmware i found 3 .pit files which one shud i use??
Galaxy S / .PIT File: DOWNLOAD. (512)
Galaxy S / .PIT File: DOWNLOAD. (513)
Galaxy S / .PIT File: DOWNLOAD. (803)
Click to expand...
Click to collapse
Use the 512 pit.
Use the pit file that corresponds to the firmware, they are all shown I think ....nearly always 512 but there are exceptions
Insanity cm 014/glitch
Okey, first of all, I'm a complete noob when it comes to this, so I need some help.
After long browsing I was able to root my Samsung Galaxy.
Now I want to update my Galaxy from 2.2 to Gingerbread.
Since I rooted my Galaxy it won't connect to Kies anymore, so I guess Kies won't work.
I have an Samsung Galaxy S I9000,
FROXO.XWJPA,
Kernel Version 2.6.32.9
Is it possible to update, if yes, how?
Thanks
anyone? :l
Go to samfirmwares.com for the latest firmware
Sent from my GT-I9000 using XDA Premium App
so I just have to update firmware and I'll have Gingerbread?
Xooley said:
so I just have to update firmware and I'll have Gingerbread?
Click to expand...
Click to collapse
Download a FW from Samfirmware, the latest is I9000XXJVR (Its 2.3.4), then via Odin you flash a 3 file's, its CODE, MODEM and CSC, and pit file and tick re-partition
Xooley,
I'm new on the forums so cant post any links but if you search for "how to use Odin" then it's really not that difficult.
The biggest decision you have is whether to stick with a "stock" copy of firmware i.e released by the manufacturer or install one of the modded versions from the hard working developers on XDA.
if you have a rooted phone then this wouldn't normally prevent KIES from working, so it might be that your carrier (orange?) hasn't release a Gingerbread version yet.
You can get most stock roms from samfirmwares as stated above. If you've never installed a rom before, make sure you read about it (checked youtube) to see if there are any problems with the one that you have chosen.
best of luck
Hello
i have an Indian galaxy tab 7 p1000
recently i flashed it with gingerbread unoficially
now i need to flash it with stock rom for gingerbread in India
edit 1: It had p1000ddjm2
edit 2: Multiupload is dead so all links are too
edit 3: DDJPA You can download it from http://db.tt/E5bdK66R
edit 4: due to generating excessive traffic dropbox has disabled my public links. post your mail ids if you want it i will add it to shared dropbox folder
Same problem here.
Anybody please help.
TIA
Sent from my GT-P1000 using XDA App
CHECK, you will get your 'p1000ddjm2', flash with 'Odin', try rooting and change to Indian CSC (search..!) and Kies should update automatically...
Samsung galaxy tab 7" in India gets Gingerbread.
after installing DDJM2 kies goes into connecting loop
new firmware DDJPA 2.3.3 has to be manually flashed
hex007 said:
Samsung galaxy tab 7" in India gets Gingerbread.
after installing DDJM2 kies goes into connecting loop
new firmware DDJPA 2.3.3 has to be manually flashed
Click to expand...
Click to collapse
where can i get the DDJPA 2.3.3 flash files?
illuminatus01 said:
where can i get the DDJPA 2.3.3 flash files?
Click to expand...
Click to collapse
Does your phone get recognized by Kies you should be able to do it
Only if you have flashed another rom do you have to do it manually
First know how to use odin.
DDJPA 2.3.3 : Links in OP
hex007 said:
Does your phone get recognized by Kies you should be able to do it
Only if you have flashed another rom do you have to do it manually
First know how to use odin.
Click to expand...
Click to collapse
yeah have used odin before. my problem was exactly the same as yours. after using overcome for a while, used odin to get back to DDJM2. but after that kies wont recognise my tab anymore and enters connecting loop.
the flash files were exactly what i needed. thanks a lot
hex007 said:
First know how to use odin.
Click to expand...
Click to collapse
there's another thing I need to know before i flash. it looks like the modem.bin and CSC files are contained in a single file in the DDJPA flash file you posted above. does this mean i do not need to specify the 'CSC' and 'phone' files in ODIN? I mean, specifying only the 'PDA' file on ODIN will be sufficient,right?
illuminatus01 said:
specifying only the 'PDA' file on ODIN will be sufficient
Click to expand...
Click to collapse
specifying only the 'PDA' file on ODIN will be sufficient
updated successfully.
I have installed latest version of Kies. my tab(Froyo2.2, Rooted only ) gets connected well and shows all files n everything. But I am still not getting the notification for Firmware update? I am from Mumbai area. do I have to keep Kies window open and running all the time?? how does it work?
kevingtab said:
I am from Mumbai area. how does it work?
Click to expand...
Click to collapse
i am from mumbai too .
if you have rooted your device you have probably made your warranty void.
if you know how to use Odin i would recommend you to flash 2.3.3 DDJPA manually
DDJPA-----> http://www.multiupload.com/E3Y46J67TD
Odin-------> http://www.multiupload.com/IU9CEI3CHU
first know how to use odin and then try
hex007
Hey i'm from Pune and flash this firmware....
i want to know how to root,
How to convert to ext4,
how to add superuser,
CWM Manager and busy box in this firmware do u have any link.....
Thank you so much....
thakarparth said:
Hey i'm from Pune and flash this firmware....
i want to know how to root,
how to add superuser,
CWM Manager and busy box in this firmware do u have any link.....
Click to expand...
Click to collapse
cfroot ------> http://www.multiupload.com/89LRLTIPLL
flash this for root cwm and bb
Ya..But yesterday I finally got the notification and got my Tab updated to Gingerbread.. Had to root it again for making some apps like ROM Manager, Root Explorer work..(used ODIN 1.7 and help from Google }
Observations : NFS Shift does not work..the screen goes off after EA logo..
The RAM utilized is always more than 300MB even in Flight mode,..(using ADW launcher) Even if try to kill running apps, the max i get is 290 MB utilized RAM..
E-book and Daily Briefing - Missing !!
I updated the firmware with odin 1.7.
But later i found "E-book" and "Daily Briefing" go missing !!
Additionally i see "Music Hub" added in the menu.
Can anyone confirm if the missing apps are absent in firmware or just in my tab as i flashed it over "DXJPI" and didn't flash/reset the device to retain the data.
gurudev32 said:
I updated the firmware with odin 1.7.
But later i found "E-book" and "Daily Briefing" go missing !!
Additionally i see "Music Hub" added in the menu.
Can anyone confirm if the missing apps are absent in firmware or just in my tab as i flashed it over "DXJPI" and didn't flash/reset the device to retain the data.
Click to expand...
Click to collapse
It got it fixed,.
But no Audio/Video support in GTalk
any fix for this ???
dont know abt dxjpi
@hex007
can u confirm if you have Audio/Video support in GTalk or not !
It was not that easy for me. The device was originally from Arab region on which i had managed to load Indian ROM.
GB loaded and Odin gave pass, but again went back to download mode. On a hunch i tried using the old CSC and Modem file and voila it restarted. But then went and got stuck with invalid certificate. Cleared up the cache and hurrah! restarted to Indian GB
Many thanks for the ROM file.