Not too much you can do in it but it's always nice to be able to get into it. Even says on the title bar "Verizon Hidden Menu" haha.
*DISCLAIMER* I AM NOT RESPONSIBLE FOR ANYTHING YOU DO TO YOUR PHONE WITH THE INFORMATION GIVEN HERE.
All you do is dial ##program910 (##7764726910)
Hit send
"Service Code" is 000000
Related
Under the Today Screen Settings, I can uncheck every plugin there, but why can't I remove the dial lookup plugin? Is there a way, or program, to remove this plugin?
From the today screen, hit the menu soft key in the bottom right.
Then go to Preferences.
Then check "Hide Lookup Field"
That what you wanted?
Thanks that's it bro.
If I remove the dial pad plugin, I can't lock the device by pressing the "End Call" button or dial #s without going into the dial pad app. I have the AT&T WM6 and ExtendedRom.
Anybody else having the same problem?
I'm assuming you're removing it via the registry so that the item doesn't load. That will cause problems because it also provides functionality to some of the hardware buttons, as you've discovered. The best you can do is hide the lookup field (Menu-->Preferences-->Hide Lookup Field), or...not too long ago someone created an app (it might have been a mortscript script) that will forcefully hid the entire carrier/dial lookup item, without actually unloading it. Search the 750 forum.
imsachin said:
If I remove the dial pad plugin, I can't lock the device by pressing the "End Call" button or dial #s without going into the dial pad app. I have the AT&T WM6 and ExtendedRom.
Anybody else having the same problem?
Click to expand...
Click to collapse
No option to hide lookup field in WM6 leaked version AT&T???? Or am I missing something???
Does anybody know how to change the setting for the dialpad during a phone call? I need to have the dialpad on all the time, even during a phone call.
Thanks.
EagleClaw said:
Does anybody know how to change the setting for the dialpad during a phone call? I need to have the dialpad on all the time, even during a phone call.
Thanks.
Click to expand...
Click to collapse
Hi,
KaiserTweak can do it:
Call -> disable both "Fast Sleep" and "Sleep" options!
Try this great application, with many other tweaks!
PS: Nex time, however, use better the forum "search" feature!!
Ciao
Thanks for your help. But I have KT installed and the first two settings are disabled. The only thing it did was solve the phone going black after 10 seconds. My dialpad is still replaced by the status page. And I need to have the dialpad up all the time.
I also check the registry settings that KT changes, and they were changed. So I don't know if this is an issue with my phone or all Kaisers.
Any registry tweak that you know?
oh, i get it........you mean the keypad dont you?
EagleClaw said:
Thanks for your help. But I have KT installed and the first two settings are disabled. The only thing it did was solve the phone going black after 10 seconds. My dialpad is still replaced by the status page. And I need to have the dialpad up all the time.
I also check the registry settings that KT changes, and they were changed. So I don't know if this is an issue with my phone or all Kaisers.
Any registry tweak that you know?
Click to expand...
Click to collapse
Ok, sorry, but i didn't well understand your bug, or requirement!!
What do you mean for "Status page"??
Can you post some screenshot?
Sorry, again, dude
don't need screenshots, i understand now!
But only one question: after you start a call can you tap the left softkey and show the dialpad? if so, you would like to always show the dialpad tab, and not the status page, also when the call start without pressing any key, right??
@[email protected] said:
Sorry, again, dude
don't need screenshots, i understand now!
But only one question: after you start a call can you tap the left softkey and show the dialpad? if so, you would like to always show the dialpad tab, and not the status page, also when the call start without pressing any key, right??
Click to expand...
Click to collapse
I believe this is exactly what he meant, and I for one would like to know also.
Dom; that's exactly what I meant. 99% of my calls I make through my pbx, and because of that, I need to keep inputing numbers. The fact that I need to click on the "show keypad" on every call is annoying and dangerous (when I am driving). Yes, the show key pad is on the left corner, but it would be more convenient to have it on all the time, and when and if I need the status page, I would press the show status page button.
I am sorry I was not clear on my first post.
Thanks.
when i click on 2 numbers as a short cut for a name and click on it, it immediately dial it instead of opening the contact, problem is i have more than a number for one contact and sometimes i want to dial the other number is there any tweak for this???? i really appreciate any help as it frustrate me dialing when i am in a hurry...
i know i could click right/left to change the number but somehow the numbers keeps changing fast like it's malfunction.
Same problem, I find autumatic dial very anoying
Is there any way to disable it and only dial by pressing the dial key ?
Thankxxxx
You can TRY to click the arrows left&right of the humber description. It should look something like this:
[NAME] < mobile number >
After pressing on of the arrows:
[NAME] < work number >
But the arrows are very small. Gesture doesn't work unfortunately. You can also use the DPAD down buttons to select the contact you like to call and then use the DPAD left or right arrow to switch between numbers for that contact. But I hate the DPAD
I would like it if you could just click and hold the contact and be able to switch numbers from the context menu...
Just upgraded the ROM to 1.9.
prior to the upgrade, when I press the phone button, it shows me the telephone pad screen with shortcut button to choose "Contact" on the bottom-left. Now only can select video call.
Anything I can do to get the "Contact" short-cut again.
Please please help me!!!!!!!
thanks..............................
i'm sure that a reg edit somewhere will help, but tbh, why do you need to go into contacts?
using the on screen keypad in the phone screen, type the name of the person as if you were using t9.
For example, to find George, you would type 436743 and all the contacts with George in their name will be displayed. use the down arrow to highlight the one you want to call and then hit the call button.
RTFM and learn how to use your phone dude......:-(
Most of existing users "complain" about this changes and lots of discussion about this topic already. You may want to look at the following post for some solutions
http://forum.xda-developers.com/showthread.php?t=412668&highlight=upgrade
sleeeepys said:
Just upgraded the ROM to 1.9.
prior to the upgrade, when I press the phone button, it shows me the telephone pad screen with shortcut button to choose "Contact" on the bottom-left. Now only can select video call.
Anything I can do to get the "Contact" short-cut again.
Please please help me!!!!!!!
thanks..............................
Click to expand...
Click to collapse
My soft keys have all seemed to fail and not responding to touch. It started with the back button and then I went into settings and rearranged the buttons and all was good for about a week. Now the home and menu buttons are not responsive or you have to tap like 20 times until it registers. I haven't dropped the phone or got it wet and I have the quick window case on it. Anyone else experience this issue? Is it fixable or is my digitizer most likely going bad? As of right now, the only option I have is to use the phone in landscape mode with the buttons on the left side of the screen. I will most likely reinstall factory recovery, unroot, save all of my music and pics and then factory reset. I even have the issue when booted into TWRP which leads me to believe that the digitizer is going bad.
lostsoul77 said:
My soft keys have all seemed to fail and not responding to touch. It started with the back button and then I went into settings and rearranged the buttons and all was good for about a week. Now the home and menu buttons are not responsive or you have to tap like 20 times until it registers. I haven't dropped the phone or got it wet and I have the quick window case on it. Anyone else experience this issue? Is it fixable or is my digitizer most likely going bad? As of right now, the only option I have is to use the phone in landscape mode with the buttons on the left side of the screen. I will most likely reinstall factory recovery, unroot, save all of my music and pics and then factory reset. I even have the issue when booted into TWRP which leads me to believe that the digitizer is going bad.
Click to expand...
Click to collapse
Sounds like DEFINITELY a digitizer problem. The fact that it still does it in TWRP really proves that IMO
Sent from my LG-D950 using XDA Premium 4 mobile app
Try going to your hidden settings menu thru the phone's dial pad. How? - just dial 3845#*???# replace the "???" With whichever variant yours is. I'm T-Mobile so mine is the D959 so I use 3845#*959# … you don't have to hit send or do anything … it will automatically open up a menu list. In this list you will see a "Settings" option. Click it. Then in the next window, scroll down it's list towards the bottom and you'll see an option for "Update Touch Firmware". Select it. … you're phone will be froze and unresponsive for about 5 -10 seconds. Once it becomes responsive again just exit via the "back" key or "home" key or however you want. You won't see anything happen or anything change or notifying you that its updating or that it finished/or worked. It just does. Not sure if this will help you , but it heps fix mine when the knock to wake stops working. Just a idea give it a shot. It won't hurt anything. And don't mess with anything else in that hidden menu if you're not sure what your default setting is or know what it does. You can really mess it up in there. Good luck.
mattwheat said:
Try going to your hidden settings menu thru the phone's dial pad. How? - just dial 3845#*???# replace the "???" With whichever variant yours is. I'm T-Mobile so mine is the D959 so I use 3845#*959# … you don't have to hit send or do anything … it will automatically open up a menu list. In this list you will see a "Settings" option. Click it. Then in the next window, scroll down it's list towards the bottom and you'll see an option for "Update Touch Firmware". Select it. … you're phone will be froze and unresponsive for about 5 -10 seconds. Once it becomes responsive again just exit via the "back" key or "home" key or however you want. You won't see anything happen or anything change or notifying you that its updating or that it finished/or worked. It just does. Not sure if this will help you , but it heps fix mine when the knock to wake stops working. Just a idea give it a shot. It won't hurt anything. And don't mess with anything else in that hidden menu if you're not sure what your default setting is or know what it does. You can really mess it up in there. Good luck.
Click to expand...
Click to collapse
I gave that a shot and nothing happens after dialing the code; i'm on the sprint version. Was going to try flashing back to stock and see if that helps; trying to find the thread to do so and to download the .tot files.
http://forum.xda-developers.com/showthread.php?t=2644083
Flash back to stock thread
mattwheat said:
http://forum.xda-developers.com/showthread.php?t=2644083
Flash back to stock thread
Click to expand...
Click to collapse
I flashed back to stock and upgraded to KK. The button problem sorta went away; acts funny in some apps to where home or menu won't respond and takes a few taps for back button to register. I found the correct way to access the hidden menu for the sprint variant and screen test is showing a dead area when doing the drawing test:
The Secret code to access hidden menu on LG G Flex LS995 is different.
Dial 5689#*995# , You will access the hidden menu on G Flex.
How to Troubleshoot Problems Using the hidden menu on LG G Flex (LS995).
1. Dialer 5689#*995# ->
2. Select Device Test ->
3. Press Power Button & Select AATFULL(+power key) ->
4. Select All Auto Test – Full.
lostsoul77 said:
I flashed back to stock and upgraded to KK. The button problem sorta went away; acts funny in some apps to where home or menu won't respond and takes a few taps for back button to register. I found the correct way to access the hidden menu for the sprint variant and screen test is showing a dead area when doing the drawing test:
The Secret code to access hidden menu on LG G Flex LS995 is different.
Dial 5689#*995# , You will access the hidden menu on G Flex.
How to Troubleshoot Problems Using the hidden menu on LG G Flex (LS995).
1. Dialer 5689#*995# ->
2. Select Device Test ->
3. Press Power Button & Select AATFULL(+power key) ->
4. Select All Auto Test – Full.
Click to expand...
Click to collapse
That's what I meant when I posted
3845#*???# and replace the "???" With your variant number.
mattwheat said:
That's what I meant when I posted
3845#*???# and replace the "???" With your variant number.
Click to expand...
Click to collapse
I understood what you meant but that 3845 code doesn't work with the Sprint variant...have to use 5689....