Kaiser Dialpad changing to Status page - Tilt, TyTN II, MDA Vario III General

Does anybody know how to change the setting for the dialpad during a phone call? I need to have the dialpad on all the time, even during a phone call.
Thanks.

EagleClaw said:
Does anybody know how to change the setting for the dialpad during a phone call? I need to have the dialpad on all the time, even during a phone call.
Thanks.
Click to expand...
Click to collapse
Hi,
KaiserTweak can do it:
Call -> disable both "Fast Sleep" and "Sleep" options!
Try this great application, with many other tweaks!
PS: Nex time, however, use better the forum "search" feature!!
Ciao

Thanks for your help. But I have KT installed and the first two settings are disabled. The only thing it did was solve the phone going black after 10 seconds. My dialpad is still replaced by the status page. And I need to have the dialpad up all the time.
I also check the registry settings that KT changes, and they were changed. So I don't know if this is an issue with my phone or all Kaisers.
Any registry tweak that you know?

oh, i get it........you mean the keypad dont you?

EagleClaw said:
Thanks for your help. But I have KT installed and the first two settings are disabled. The only thing it did was solve the phone going black after 10 seconds. My dialpad is still replaced by the status page. And I need to have the dialpad up all the time.
I also check the registry settings that KT changes, and they were changed. So I don't know if this is an issue with my phone or all Kaisers.
Any registry tweak that you know?
Click to expand...
Click to collapse
Ok, sorry, but i didn't well understand your bug, or requirement!!
What do you mean for "Status page"??
Can you post some screenshot?

Sorry, again, dude
don't need screenshots, i understand now!
But only one question: after you start a call can you tap the left softkey and show the dialpad? if so, you would like to always show the dialpad tab, and not the status page, also when the call start without pressing any key, right??

@[email protected] said:
Sorry, again, dude
don't need screenshots, i understand now!
But only one question: after you start a call can you tap the left softkey and show the dialpad? if so, you would like to always show the dialpad tab, and not the status page, also when the call start without pressing any key, right??
Click to expand...
Click to collapse
I believe this is exactly what he meant, and I for one would like to know also.

Dom; that's exactly what I meant. 99% of my calls I make through my pbx, and because of that, I need to keep inputing numbers. The fact that I need to click on the "show keypad" on every call is annoying and dangerous (when I am driving). Yes, the show key pad is on the left corner, but it would be more convenient to have it on all the time, and when and if I need the status page, I would press the show status page button.
I am sorry I was not clear on my first post.
Thanks.

Related

Change menu at the start screen

Hi there - does anyone know how the lowest line of the start screen can be changed i.e. is it possible to change the list of programms which appear ?
THANKS
Myrin
The Start menu? Sure, start, settings, personal tab, menus. If any appear to be locked (won't let you remove unselect them) then you need to use total commander or equivalent and go to My Device/Windows/Start Menu and delete the unwanted shortcuts. You would then be able to use the menu program above to add in up to seven programs that you want.
peter7 said:
Hi there - does anyone know how the lowest line of the start screen can be changed i.e. is it possible to change the list of programms which appear ?
THANKS
Myrin
Click to expand...
Click to collapse
I think you mean the bottom line of the Today Screen.
So, you want to change the shortcuts of the HTC Homeplug?
I don't know how to do that cause I don't use it. Maybe anyone knows?
Pls see the file attached - this line below I mean !!!
So you want to change the programs accessed by the soft keys on the Today screen? Vito Button Mapper will let you do this.
Will it work also with Magic Button ?
I'm getting headache with the screenshot
Anyway, I think peter7 meant the Tray Bar program.
I think he is using some Tray Launcher of some sort. Difficult to look at the screenshot.
what the hell did you use to take the screenshot, a Sharpy?
Can you take a better screenshot, this time with a screenshot application that actually takes color images?
anyways, that is one strange looking today screen you got there. What's the icons next to the start button?

Assigning Hotkeys on the Kaiser

Hi,
I am trying to find a way of assigning the hardware key to launch the backlight application. Preferably the button the the top left of the device which is currently used for the voice speed dial.
Any ideas?
Thanks
Ronan
I changed mine from Voice Dial to Comm Manager by going to the button icon in settings and there is a list there, Im not sure what programs are on there but its a start.
xtremdremz said:
I changed mine from Voice Dial to Comm Manager by going to the button icon in settings and there is a list there, Im not sure what programs are on there but its a start.
Click to expand...
Click to collapse
Hi,
Thanks for the advice, unfortunately the backlight option is not on this menu. I wonder if it is possible to add it via registry entry or some other means.
Ronan
hmm i kno there is some kind of "display off" program u can find, then u can go under the buttons settings and select that program to be under a certain button... see if u can find it, ill try and find a link for it and send it to ya.

See No Evil 2.5 ?

I just got a Tilt and tried the SNE 2.5. For anyone using it I have a few questions.
My Fn keys don't seem to line up to the keyboard for example
On the Tilt Q has ! on it and W has @ on it. When I do Fn and Q I get @ instead of !. Other keys have this issue as well.
Also I get a rainbow color at the top when in portrait mode.
I can't seem to make voice dialing a side button like I could with my 8525 default ATT ROM.
**This is NOT intended as a flame**
You did not read properly before jumping in head first. Start with the Kaiser Wiki and GWENI linked in my signature.
Arius1 said:
I just got a Tilt and tried the SNE 2.5. For anyone using it I have a few questions.
My Fn keys don't seem to line up to the keyboard for example
On the Tilt Q has ! on it and W has @ on it. When I do Fn and Q I get @ instead of !. Other keys have this issue as well.
Also I get a rainbow color at the top when in portrait mode.
I can't seem to make voice dialing a side button like I could with my 8525 default ATT ROM.
Click to expand...
Click to collapse
just install this and soft reset. It will fix your keyboard settings. bye.
Thank both and I didn't see that wiki. The keyboard is fixed but I don't see anything in the wiki about the rainbow coloring I am having. The voice command that the wiki talks about isn't my issue. Button 6 exists but with this ROM it doesn't list the Voicecommand as a option under all the settings.
Arius1 said:
Thank both and I didn't see that wiki. The keyboard is fixed but I don't see anything in the wiki about the rainbow coloring I am having. The voice command that the wiki talks about isn't my issue. Button 6 exists but with this ROM it doesn't list the Voicecommand as a option under all the settings.
Click to expand...
Click to collapse
post a screen shot of the rainbow coloring you are receiving.
Here you go.
That really isn't a screenshot so I cannot answer the rainbow question because I can hardly see it. Anyhow, I'm sure you searched how to remap button 6. There are a few cab files floating around that will allow you to do that without any issues.
That is a battery status bar.
Take a look at the SNE thread to confirm it.
Sorry try this shot.
It's not button 6 that's the issue it's that voice dial isn't listed as an app that can be applied to button 6.
Thanks jym04 that is what the coloring is at the top. Thank you for pointing it out.
Now if I can figure out why a MMS message isn't downloading and the voice dial I can use this thing.
A side note on the 8525 the 3G icon wouldn't be big like it is in my picture it would always show two arrows saying it's constantly connected. I used the tweaks that are built into the ROM to say always connected but nothing.
with the bar on top of your display (you call it rainbow color) you can watch your battery status. It´s not a bug, it´s a feature
Arius1 said:
Sorry try this shot.
It's not button 6 that's the issue it's that voice dial isn't listed as an app that can be applied to button 6.
Thanks jym04 that is what the coloring is at the top. Thank you for pointing it out.
Now if I can figure out why a MMS message isn't downloading and the voice dial I can use this thing.
A side note on the 8525 the 3G icon wouldn't be big like it is in my picture it would always show two arrows saying it's constantly connected. I used the tweaks that are built into the ROM to say always connected but nothing.
Click to expand...
Click to collapse
Thats the VistaHide battery plugin.
Arius1 said:
Sorry try this shot.
It's not button 6 that's the issue it's that voice dial isn't listed as an app that can be applied to button 6.
Click to expand...
Click to collapse
Create a shortcut to voice dial in your Start Menu (or subdirectory therein). Then it will appear as an app that you can apply to buttons.
I got flamed for asking a similar question (different app) and I couldn't find an answer through search either.
Thank you Exitao!
Wow proud to see ppl still flashing my ROMS...

How to put menu letters bigger?

How to increase the letters on the start menu?
I have the old start menu view as you can see in the image, but letters are so small at natural
I think I've seen a trick to change the registry but can not find it. Thank you
I don't know if the ones in the menu are changed, but go to: settings - all settings - system - screen - text size. Again, don't know if only the message text is changed or the menu. Sorry if this is not the solution
georgeono said:
I don't know if the ones in the menu are changed, but go to: settings - all settings - system - screen - text size. Again, don't know if only the message text is changed or the menu. Sorry if this is not the solution
Click to expand...
Click to collapse
Is not, but thank you... You are very kindly and try to help that´s the spirit of this pages...
The problem is make bigger the letter in the extended menu that are really small... Any other idea?
Thanks all....
I'm sure it can be done, there are programs for it, but I can't find it at the moment, sorry.
whizz said:
I'm sure it can be done, there are programs for it, but I can't find it at the moment, sorry.
Click to expand...
Click to collapse
I think is not a program... Is change some key from registry... I use to have a Diamond and I do but know I can´t find the page with instructions But it can be done.... Sure someone remember the way
HTC have "Enlarge Start Menu" that does that... Never heard of registry settings for it though...
This is what you're after. See attached screenshots to see the difference.
[HKEY_LOCAL_MACHINE\Software\HTC\EnlargeMenu]
"Enable"=dword:00000001
You have to soft reset the device for the change to take effect.

How 2 change the slide to accept call ?

Guys,
I hate it everytime there is a call, i have to slide the green button to receive the call.
I really really would prefer, just hitting green button to accept call - So how can i change the same ?
I just want to change this, so i guess installing a Rom is out of question as dont want anything else to get changed..
Next, The default "Active Application" widget is ugly - Anything you can suggest to replace this ?
I believe you can set the physical home button to answer calls.
Visual360 said:
I believe you can set the physical home button to answer calls.
Click to expand...
Click to collapse
I'm never happy with that. I guess I am worried that the call will be answered in my pocket, or when I remove it from my belt case. Perhaps that is more likely with the power button, however. May I will man-up and give it a try
BTW the setting is in Accessibility -> call answering/ending
craige said:
Guys,
I hate it everytime there is a call, i have to slide the green button to receive the call.
I really really would prefer, just hitting green button to accept call - So how can i change the same ?
I just want to change this, so i guess installing a Rom is out of question as dont want anything else to get changed..
Next, The default "Active Application" widget is ugly - Anything you can suggest to replace this ?
Click to expand...
Click to collapse
Use HD caller id from market, it allows various modes of answering, plus you get full screen caller picture as a bonus!
Sent from my GT-N7000 using xda premium
Moved To Q&A​
This is a question, and as such belongs in the Q&A section​
Jaiiscool - yea this app seems to be usefull will try it soon.
and yes i am still looking for more options, and if sum1 can help me with my widget question above as well...

Categories

Resources