Hi all again!
I've created this thread in order to add fixes and add-ons for Nova v8 ROM.
* Wrong OC Fix:
- This fix restores default freq/volt config in order to restore a blocked system from a exagerated OC/UV.
- Download it form title, flash it at CWM and that's all.
* Huexxx's Nova v8 Mod v1.4:
- This mod modifies nova script in order to:
· Make the navigation inside the script a little bit faster
· Directly view the currently active preset from presets submenu
· Simplifies the custom preset submenu. Now you only have to set the 4 frequencies
· Simplifies too the preset and simple overclock. Now voltages are auto established. (v1.1)
· Adds the possibility to enable/disable AUV (AutoUnderVolt) script on boot
· Adds the possibility to set the Auto UV Depth to control the voltage drop on boot (v1.3)
· Now you can view auvlog instead to run UV once (v1.4)
· Directly view the currently active freq/volt config from overclock submenu. It shows freq(vsel/calib) for each state. (v1.3)
· Directly view the currently active governor from governor set submenu
· Directly view the currently active I/O scheduler from scheduler set submenu
· Optimize a little bit the general aspect- Adds AUV script:
· Avoid to undervolt the max frequency if it's greater than 1GHz (v1.1)
· Take the lower voltage values from calibrating-recalibrating process to ensure the best UV (v1.2)
· AUV script uses the specified auto UV depth. Setting it to 0 the script ensures that the calibrated voltages are the minimum recommended by smartreflex system without do any undervolting on it (v1.3)
· Optimized timmings to ensure the calibration values are correctly stablished (v1.4)- Modifies /system/etc/init.d/11nov script to support AUV feature
- If you are using AUV you can see the log at /data/nova/auto/auvlog or within nova script's overclock submenu (v1.4)
- Adds /sdcard/nova/ocfix.zip to flash it if OC goes wrong and get a bootstuck
- Automatically disables SBT on installation (v1.1)
- I recommend to keep disabled SBT (Standby battery tweak) if you're going to use UV or AUV features.
- Feel free to use this mod altough you are not planning to use UV or AUV.
- Download it form title, flash it at CWM and that's all.
* Stock Nova v8 Restorer:
- This package restores default nova scripts and deletes all the extra stuff added by my mod.
- Updated to ensure all is restored with mod v1.3 or later version.
- Download it form title, flash it at CWM and that's all.
* Superuser downgrader:
- This package downgrades Superuser to latest stable 2.3.6.3 version.
- Download it form title, flash it at CWM and that's all.
* Nova v8 Kernel Source Code:
- Nothing to comment, it speaks by itself.
- Thanks to knzo.
Regards!
UV Testing:
* 6 serial Quadrant Standard with Power Tutor Monitoring
I've tested the battery consumption with and without UV in order to see the differences.
The test consists in a 6 serial Quadrant run and 3 times repeated for each configuration.
The common parameters are: 900, 700, 500, 300, InteractiveX, sio, wifi enabled, data connection enabled, wcdma only. In all cases I've rebooted and waited until governor had been settled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looking at the results, the power consumption with AUV activated is lower than the stock situation. LCD and WiFi consumptions are linked to parameters that aren't related to the MPU voltaje; then the interesting results are the power drained by the CPU. Also, the absolute mean quadrant scores shows that there isn't a descent on performance, or better said, the descent on performance is negligible taking into account the fluctuation in quadrant scores.
* Battery lasting with light use
Parameters are: auto UV on boot enabled, 900, 700, 500, 300, InteractiveX, sio, wifi disabled, data connection disabled, gsm 2g only. The use consists on: two or three vioce calls per day, some sms, some photos, some visits to the gallery, the alarm every morning, radio allways on.
Regards.
Thanks, I will download it later
Sent from my LG-P970 using Tapatalk
Hi!
I've added some new stuff to first post!
knzo, feel free to grabs whatever you deem appropriate for your releases.
To say that I'm using UV on boot from two days ago and everything run fine.
Regards!
Hi there I just want to know what do I get basically if I use this mod? haha please answer me as simple as you can bud not that good with this stuff . TIA bud
awesome work!!
Huexxx said:
knzo, feel free to grabs whatever you deem appropriate for your releases.
Click to expand...
Click to collapse
Thanks but no need.
I will completely redo the script for next version.
knzo said:
Thanks but no need.
I will completely redo the script for next version.
Click to expand...
Click to collapse
I hoped this answer!
denclaud said:
Hi there I just want to know what do I get basically if I use this mod? haha please answer me as simple as you can bud not that good with this stuff . TIA bud
Click to expand...
Click to collapse
Basically you get:
- A little bit modified nova script. Little bit faster, with certain things simplified, but fully operational.
- The possibility to try my UV and AUV scripts (If you want...)
- The possibility to restore default OC if things go wrong flashing /sdcard/nova/ocfix.zip
Thats all at the moment.
how make this?
can u explain for me how i put fix mod
jamespvz said:
can u explain for me how i put fix mod
Click to expand...
Click to collapse
Do you have Nova v8 installed?
If positive answer... install this stuff the same way you installed Nova v8... from recovery... install zip from sdcard... select the zip and flash it!
Regards!
Question,
Huexxx, do you have kernel source of Quasar v8?
redy2006 said:
Question,
Huexxx, do you have kernel source of Quasar v8?
Click to expand...
Click to collapse
I just saw your PM while I was about to reply to you here.
Yes, I'll upload it. Give me 30m.
knzo said:
I just saw your PM while I was about to reply to you here.
Yes, I'll upload it. Give me 30m.
Click to expand...
Click to collapse
Thanks. Few days ago when I asked it, I was forgot to PM you... because lots of reading post on XDA forum
Thanks again
http://www.multiupload.com/Z40ZNZAUVI
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
PaulBort said:
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
Click to expand...
Click to collapse
No........
PaulBort said:
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
Click to expand...
Click to collapse
If still having problem with SU, then it's better to downgrade SU, because Nova v8 including SU beta version, so perhaps you can use the stable version. Can you apply that, PaulBort?
PaulBort said:
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
Click to expand...
Click to collapse
Look at first post.
I've repacked the latest stable version of Superuser.
Try it and comment.
Huexxx said:
Look at first post.
I've repacked the latest stable version of Superuser.
Try it and comment.
Click to expand...
Click to collapse
It's not help.
Sometimes bugs present.
For me nova 4.5 last stability version.
Related
I did not make this script, i only stumbled across it and wanted to share
-Thanks to zeppelinrox for making this script
Original Thread by zeppelinrox
Requirements
Rooted
Busybox 1.8.2 or lower
Rom that supports init.d
Benefits
UI is much more responsive (less lag)
More free RAM
Recommended
Install Script Manager (easier to work with than terminal IMO)
Step 1: Run the script from Script Manager with "Run as Root" option selected
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2: Pick the scrolling speed
Step 3: Pick 11 or 12, performs the OOM Grouping Fixes (zeppelinrox recommends Hard To Kill)
-REBOOT-
The following step is setting up the minfree settings. You can select 1-9 for the preset values, or choose 10 and set your own.
Read the OP from zeppelinrox's thread for more info on what these do and tweak them to your liking.
I personally use 6,10,35,50,65,80
Step 4: Pick 1-9 preset values, or pick 10 and enter the minfree setting for each slot
-Done
sounds good, will try later
thanks!
Anyone try the script?
Sent from my GT-I9000 using Tapatalk
im waiting for a review to try this out!
supaphreek said:
im waiting for a review to try this out!
Click to expand...
Click to collapse
Ive tried it out and it works great (thats why i shared it)
If you dont like it you can always undo the script by selecting 14 in the menu
Sent from my GT-I9000 using Tapatalk
applied it to my phone, so far so good. getting no issues. will report back if i have any issues.
[EDIT] heres a quick overlook at what the minfree #1-6 will adjust as far as free memory goes.
FOREGROUND_APP: Current app that you are looking at.
VISIBLE_APP: A visible activity to the user.
SECONDARY_SERVER: This is a process holding a secondary server
HIDDEN_APP: This is a process only hosting activities that are not visible
CONTENT_PROVIDER: This is a process with a content provider that does not have any clients attached to it.
EMPTY_APP: This is a process without anything currently running in it.
james.arroyo said:
applied it to my phone, so far so good. getting no issues. will report back if i have any issues.
[EDIT] heres a quick overlook at what the minfree #1-6 will adjust as far as free memory goes.
FOREGROUND_APP: Current app that you are looking at.
VISIBLE_APP: A visible activity to the user.
SECONDARY_SERVER: This is a process holding a secondary server
HIDDEN_APP: This is a process only hosting activities that are not visible
CONTENT_PROVIDER: This is a process with a content provider that does not have any clients attached to it.
EMPTY_APP: This is a process without anything currently running in it.
Click to expand...
Click to collapse
What minfree settings works best for you?
Sent from my GT-I9000 using Tapatalk
chrisz5z said:
What minfree settings works best for you?
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
had to remove it for now, put my phone in a boot loop. did a quick nandroid recover to get it working right again. will have to play with it again at home.
I tried this script but it forced closed everytime I ran it in the script manager.
I tried the update8 of the script, ran good, after reboot checked status, nothing changed, maybe i was doing smth wrong?
james.arroyo said:
had to remove it for now, put my phone in a boot loop. did a quick nandroid recover to get it working right again. will have to play with it again at home.
Click to expand...
Click to collapse
What ROM/kernel do you have?
mattern1974 said:
I tried this script but it forced closed everytime I ran it in the script manager.
Click to expand...
Click to collapse
Sure you have Busybox 1.8.2 or lower installed?
jerkysh said:
I tried the update8 of the script, ran good, after reboot checked status, nothing changed, maybe i was doing smth wrong?
Click to expand...
Click to collapse
Does your rom/kernel support init.d?
chrisz5z said:
What ROM/kernel do you have?
Click to expand...
Click to collapse
Currently running Serendipity VII with Talon 0.4.3
james.arroyo said:
Currently running Serendipity VII with Talon 0.4.3
Click to expand...
Click to collapse
removed Talon and put Serendipity Kernel 4.1 and huzzah! (just kept the default minfree for now)
might want to add this step in the OP. not sure how important it is.
•After installing, run the app, press the MENU button and go to MORE and then in ADVANCED OPTIONS and now in CONFIG and leave the options marked exactly as shown in the screen below:
Browse as root is not default, have to check it.
james.arroyo said:
removed Talon and put Serendipity Kernel 4.1 and huzzah! (just kept the default minfree for now)
Click to expand...
Click to collapse
Seems the kernel optimizations in the script don't play well with Talon. The minfree settings shouldn't be a conflict though
james.arroyo said:
might want to add this step in the OP. not sure how important it is.
•After installing, run the app, press the MENU button and go to MORE and then in ADVANCED OPTIONS and now in CONFIG and leave the options marked exactly as shown in the screen below:
Browse as root is not default, have to check it.
Click to expand...
Click to collapse
I think thats only needed if you have the script stored in a location where you would need root to access it...(ex. /system)
Been playing with this on miui. The min field does not appear to have much effect but the 3g super charger linked in ip of original thread appears to have a nice d effect.
Top score and bottom three with
Second score without
Sent from my I897 using XDA Premium App
You need to correct the OP. There is no Busybox 1.8.2 it is 1.18.2
I also tried the 3G TurboCharger (works from HSUPA too) and my DL speed went from about 4.1 kbps to about 4.8 kbps on JJJV5 modem. Not a huge, HUGE increase but if some people are having issues with slow download speeds you might want to give it a shot. Remember to always make a backup before you try anything on your phone, no matter how "safe" or "unsafe" it claims to be.
**I did not apply or try the Kick Ass Kernel Tweak Installers
If on CM7 I'd recommend getting hard to kill plus megaRAM 2 imho, been running it along with turbocharger and kernel tweaks, on Glitch's kernel and they are sticking when I boot up even after the past couple nightly's. Also with supercharger some custom roms-as it states in the help file.
"There might be something in the init.d that interferes with priorities and minfrees, if you can't find the problem, a quick fix is to have script manager run /system/etc/init.d/99SuperCharger, "at boot" and, "as root."
Nice tutorial.
Note that you don't need to run option 11 or 12 first.
Running options 2 - 10 will always apply HTK launcher by default.
If you want bulletproof, run option 2 - 10, then run option 12, then reboot.
chrisz5z, I think it would look cool to show a screen cap of your menu after running the Cust-OOMizer... since Option 10 will then look different
Edit: I made a change to 3g TurboCharger that needs testing...
Edits to build.prop...
Code:
ro.ril.hsxpa=3
ro.ril.gprsclass=34
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.a52=0
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=268449905
ro.ril.hsupa.category=9
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.sdr=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
ro.ril.disable.power.collapse=0
Difference between this and update 2:
ro.ril.gprsclass=34 (instead of 12)
ro.ril.htcmaskw1=268449905 (instead of 14449)
I've actually seen gprsclass=32 in the past but 12 is the most common setting so I had used 12.
After researching today, seems that 32 would indeed be better than 12 BUT there is a new gprs class 34 so this would be a first for testing it at 34! (as far as I know) lol
So, I'd be interested in seeing if this is better than the 3G TurboCharger update 2 tweak!
Search for 'nstools' in market, its FREE
You can manage this tweak:
- BLD
- BLN
- BLX
- CPU Governor
- Custom Voltage, now also support uv_mv_table (some kernel still use this)
- Deepidle
- Liveoc
- Max/min scaling frequencies
- Touchwake
- CM Led
- IO scheduler selection
- Fast charge toggle
this app will restore seting on boot,
so you don't need to create/edit init script
NSTools icon by Ziv Feldman
German translation and tab icons by fschaefer
Italian translation by mattia.b89, updated by etoy
French translation by benseoul
Korean translation by phone_user
Dutch translation by jorim.tielemans, updated by micha3lvd
Polish translation by marekcichecki
Portuguese translation by Mykos
Source code:
https://github.com/arifhn/NSTools
Notes:
- If something bad happenned and you want to reset NSTools config,
install reset_nstools.zip in recovery (if its not work, try to mount /data from recovery menu before applying the zip)
- If you want to switch kernel, i recommend to uncheck 'restore on boot' setting.
It will reset to default kernel setting. You can recheck that after reboot.
- starting in v1.8 app will detect kernel version on boot, if the version has changed the settings will be discarded.
- The new permission on v1.12 and up: read contacts is used for detect missed call. You can check the source code on my github to make sure this app don't read/send your contacts data.
- read this thread about CPU governor
- for those who have problem with smartassV2 governor settings, ask your kernel developer to patch their source, see this post
krfoy said:
just fix the issue in smartassV2
it's not a NSTools issue.
Click to expand...
Click to collapse
- visit http://cyann.mobi/ for more information
For ROM developer
I've added Android.mk file so you can directly build NSTools with android build system
I've also publish my certificate here https://github.com/arifhn/platform_build
Awesome tool, thanks.
Amazing..... I was just thinking yesterday its be nice to have an app to adjust these various mods.... thank you very much!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Kushed Nexus S 4G
That's outstanding! I was waiting for that app in the development thread to get updated with sliders, but this is perfect.
Sent from my Nexus S using Tapatalk
Rooster85 said:
Amazing..... I was just thinking yesterday its be nice to have an app to adjust these various mods.... thank you very much!
Sent from my Kushed Nexus S 4G
Click to expand...
Click to collapse
OT, but could you link me to the theme you're using? What font is that?
Sent from my Nexus S using Tapatalk
uansari1 said:
That's outstanding! I was waiting for that app in the development thread to get updated with sliders, but this is perfect.
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
yes, i want to post it in dev thread
but now i can't
uansari1 said:
OT, but could you link me to the theme you're using? What font is that?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Comforta font, Sonny's ICS theme edited with the UOT kitchen for the accurate battery mod.
Sent from my Kushed Nexus S 4G
Thanks,very useful.
Wow, nice tool, thx!
Great work.
I will not include Screen Dimmer in my new reference kernel since Touch Wake has the same functionality and is the better solution. Also I recommend that people use Touch Wake instead of Screen Dimmer. So you might want to consider removing that.
Maybe you can also include LiveOC and Custom Voltage. Also an interface to idle_stats/reset_stats for DEEP IDLE would be awesome.
arifhn said:
Search for 'nstools' in market, its FREE
You can manage BLD, BLN, BLX, Deepidle, Screendimmer, Touchwake
will restore seting on boot
so you don't need to create/edit init script
Post your feedback here
Thanks
Click to expand...
Click to collapse
hey great work~!
i was going to program it myself... installed sdk/eclipse and all...
you beat me to it!
Well.. thanks for the great work...
Ezekeel said:
Great work.
I will not include Screen Dimmer in my new reference kernel since Touch Wake has the same functionality and is the better solution. Also I recommend that people use Touch Wake instead of Screen Dimmer. So you might want to consider removing that.
Maybe you can also include LiveOC and Custom Voltage. Also an interface to idle_stats/reset_stats for DEEP IDLE would be awesome.
Click to expand...
Click to collapse
Quote. Maybe an interface for screenoff_maxfreq too, if it's possible. Makes testing so much easier. Great work.
I can't change the charging limit, it always gets back to 96
Running nscollab 1.0.50 and matrix 10.0 bfs
lvnatic said:
I can't change the charging limit, it always gets back to 96
Running nscollab 1.0.50 and matrix 10.0 bfs
Click to expand...
Click to collapse
If the kernel you are using does include the 100% charge 'fix' the maximum value is 100; if it does not, the maximum is 96.
As Ezekeel said a few posts above t would be awesome if including the script for liveoc! Going to download and try it out right away!
Sent from my Google Nexus S using Tapatalk
Ezekeel said:
If the kernel you are using does include the 100% charge 'fix' the maximum value is 100; if it does not, the maximum is 96.
Click to expand...
Click to collapse
Latest matrix kernel definitely has blx. Just wiped cache and dalvik and flash the cfs version, same story. Set the blx tweak to 100, stays like that and when I re-open the app its back to 96.
LE: reboot doesn't help
Ezekeel said:
Great work.
I will not include Screen Dimmer in my new reference kernel since Touch Wake has the same functionality and is the better solution. Also I recommend that people use Touch Wake instead of Screen Dimmer. So you might want to consider removing that.
Maybe you can also include LiveOC and Custom Voltage. Also an interface to idle_stats/reset_stats for DEEP IDLE would be awesome.
Click to expand...
Click to collapse
Thanks
Yes, i will add those features in the next release
Sent from my Nexus S using XDA App
I've installed the app...... give superuser root access but everything is grayed and unselectable ... why?
lvnatic said:
Latest matrix kernel definitely has blx. Just wiped cache and dalvik and flash the cfs version, same story. Set the blx tweak to 100, stays like that and when I re-open the app its back to 96.
LE: reboot doesn't help
Click to expand...
Click to collapse
I'm also using matrix kernel
You're right, can't set value more than 96
Just try lower value and its work.
Maybe like ezekeel said in previous post, the kernel doesn't include 100% charging patch?
lukappaseidue said:
I've installed the app...... give superuser root access but everything is grayed and unselectable ... why?
Click to expand...
Click to collapse
Thats mean your kernel doesn't support it.
Sent from my Nexus S using XDA App
lukappaseidue said:
I've installed the app...... give superuser root access but everything is grayed and unselectable ... why?
Click to expand...
Click to collapse
Are you running a non stock kernel?
The kernel needs Ezekeel's mods.
Sent from my Nexus S using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you guys struggling to get good performance on Jelly Bean?
Are you sick of cleaning up the system after flashing a new ROM?
Do you want to do something simple like surfing the internet, without having to watch the battery percentage going down with every second??
Then this ROM is for you lazy bums. From the developer of Badass Kernel, coming with a hell lot of tweaking, a clean system, a new kernel and a stupid "commercial-like" introduction, this ROM will make sure you get out your phone every 2 minutes just to admire its coolness.
So, getting into serious business..
This rom is based on CM10.1.0 nightly and my Badass Kernel.
Features:
24-step Volume
Zipaligned and fully optimized system apps
Apps2SD integrated with zipaligning everytime a non-zipaligned app is installed
Clean system, stripped of unnecesary libs and apps
PureAudio engine tweaked to work with any equalizer (you gotta try DSPManager's Bass Boost now)
Dolby Virtualizer activated at boot through snd2354 binary
Youtube app with MP3 and Video download integrated
Patched Services for better multitasking
Updated Superuser and Zipalign binaries
Eliminated SMS-to-MMS conversion when reaching 160 characters, added message pop-up
Latest Multi-DPI Playstore included in GApps version
Android's Native Task Killer values tweaked (no need for minfree script or ram manager)
zRam, zCache and Kernel Samepage Merging fully working and activated(no need for swap anymore)
Perfect Keyboard
Undervolt, Underclock, Triple Buffer and all the other modifications present in my kernel
Really lightweight modified Zeam Launcher
Gapps included
New fonts optimized for LDPI resolution
New proprietary theme
LMT Launcher Pie Control
Smoother SystemUI animations (you have to apply Lenio theme to get these, I can't integrate them in the system yet)
v3
Replaced Perfect Keyboard with zipaligned LatinIME
Added NexMusic player
Resized zRam disk
Tweaked LowMemoryKiller parameters
Enabled vSync(hopefully)
Added Smooth Scrolling in framework.jar
Set correct permissions to /sd-ext folders inside the A2SD script
Updated kernel to 1.6.1
Added LowBattery Powersave feature for Badass governor
Badass parameters are more performance biased now
Recalculated Frame Buffer Size for Triple Buffering
Clean-up(remove deprecated CPU governors)
Backport Adaptive RED Net Scheduler from 3.4 kernel
Replace Snappy Compression with the much faster LZ4 Compressor for zRam
v4
Rebase on latest CM10.1.0
Update compcache script(now zRam can be activated from Settings->Performance->Memory Management, it is not activated by default anymore, but it is recommended that you enable it)
Integrate StatusBar smooth animations in the framework. The theme is just for whoever likes the look now.
Whole system Odex-ed
Update kernel to latest version
vQuattro 30/06
Update base to latest CM10.1 nightly
Add Touchpal with LDPI optimized theme
Change SMS Popup layout
Re-think services.jar values for better performance in detriment of multitasking
Adjust minfree values to suit the new services.jar values
Add Now Playing player
Re-optimize apps with a higher threshold of optimizing(goddamn, this took 6 hours)
Take down the NoGapps version to avoid weird bugs(to get a NoGapps version, just delete everything that starts with Google in /system/app after boot)
Update kernel to 1.8
Add SIOPlus scheduler (finally something equal or better than deadline)
Add CPU Idle driver to support C4 Deeper Sleep state
Add Wheatley governor to make more use of the new C4 state.
Change Bootsplash
Screens:
Download:
Lenio vQuattro.zip - 107.68 MB
Installation:
Copy the flashable zip to sdcard
Wipe data
Flash in recovery
Reboot and wait 5-10 minutes for the first boot
Change CPU governor to Badass or Smartass to get rid of the lag
Apply Lenio theme in ThemeChooser for a fresh new layout
Be amazed!
PRO Tips:
Use SmartassH3 or Badass with 68-652 MHz and Deadline I/O for good performance/battery balance
Enable zRam in Settings->Performance->Memory Management
Disable logging and notifications in both SuperSU and Setting->Superuser for a performance boost
Check Disable HW Overlays in Developer Options (NOTE:This option resets at every boot)
Install CrossBreeder from my kernel's thread
..to be continued
Credits:
MatrixDJ96 for the odexing script
Osama Ghareeb for Youtube app with MP3 and Video download
noname81 for LMT Launcher
AndroidarmV6 and A_U for the base kernels
Cronic Corey for A2SD script
Jeeko for PureAudio
Zeppelinrox for the services.jar patcher (Supercharger)
*Sorry about the totally unoriginal slogan but I f*ckin' love Carlsberg
First !
FAST, SMOOTH, GREAT
One of the best roms on xda !!!
Click to expand...
Click to collapse
Thanks for the Rom, how is the battery life, bc in cm10,1 nightly from 15.06 in 8h of standby drain 40% !?
scufy said:
Thanks for the Rom, how is the battery life, bc in cm10,1 nightly from 15.06 in 8h of standby drain 40% !?
Click to expand...
Click to collapse
It depends mostly on the kernel, the performance settings and the strength of the signal(GSM, 3G, EDGE).
I did my best to get a really good battery life in my kernel, but even I get battery drain if I download something on poor 3G signal.
Don't worry about stand-by, this ROM has the best Deep-Sleep management. I got 1% drop in 7-8 hours. Just be sure you turn off the data connection when you know you don't use it.
Nice job:thumbup:
Will try this later
Edit: Do we have to wipe data/cache after flashing the rom??(just to make it clear)
nice work :good:
i could do some more mods for u if u r interested to include in the rom..let me know
Myst0gaN said:
Nice job:thumbup:
Will try this later
Edit: Do we have to wipe data/cache after flashing the rom??(just to make it clear)
Click to expand...
Click to collapse
Only before. Flashing roms doesn't do any modifications to your /data or /cache partition.
A_U said:
nice work :good:
i could do some more mods for u if u r interested to include in the rom..let me know
Click to expand...
Click to collapse
Well I'm kind of short on time right now so I might need some help. I'll let you know. Thanks for your support man.
Re:[CM10.1ROM][Kernel][ODEX] Lenio ROM
The rom is awesome and super smooth the only bug i've found so far is this...
Mihail_Russian said:
The rom is awesome and super smooth the only bug i've found so far is this...
Click to expand...
Click to collapse
Yes, this is a known bug. It's because of the changed fonts. Does it bother you that much? I'm trying to focus on performance and battery first, I'll get to the layout later.
But fortunately, that's the only place where it's occuring, in the DeskClock app.
No it doesn't bother me that much i care on what's under the hood & yes layout can be fixed later
sir alin.p, can u make for ics aosp too?
Sent from my GT-S5570 using Tapatalk 4 Beta
Screenshot
can we see screenshot boss?
Well it's about time you bake your own ROM chef Congrats !
Damn I already left home when I read this thread, will have to wait until I get back home to try this Lenio ROM. Office time will feel like ages today ...
Sent from my GT-P3100 using Tapatalk HD
andrejohn said:
sir alin.p, can u make for ics aosp too?
Sent from my GT-S5570 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'll surely do it but I'm pretty busy right now. Maybe I'll do it until Sunday.
palaboy said:
can we see screenshot boss?
Click to expand...
Click to collapse
Well, there's not much to see, the only things changed in the layout are the fonts and the centered clock. But I plan on making some real changes in the next version.
distan7 said:
Well it's about time you bake your own ROM chef Congrats !
Damn I already left home when I read this thread, will have to wait until I get back home to try this Lenio ROM. Office time will feel like ages today ...
Sent from my GT-P3100 using Tapatalk HD
Click to expand...
Click to collapse
) thanks man!
Nice and snappy
How to move app in ext4? Help pls
hello everyone, can you tell me what recovery are you using?
alin.p nice work
wow great rom thank-you... maybe developers could use 'Lightning Launcher' as the system launcher instead of 'Zeam Launcher' as Zeam is no longer under development. Lighting Launcher is only 221k and for it's size it has lots of options and customization... must admit takes some time to setup but once you know how to do it its pretty cool... give it a try http://bit.ly/111XAiW
screenshot, please!!!
deepsht said:
How to move app in ext4? Help pls
Click to expand...
Click to collapse
If you have an ext4 partition on your sdcard, you must also have a folder named sd-ext. The apps will be automatically installed there, no need to move them. Check if you have the sd-ext folder, it's in the root.
pryerlee said:
wow great rom thank-you... maybe developers could use 'Lightning Launcher' as the system launcher instead of 'Zeam Launcher' as Zeam is no longer under development. Lighting Launcher is only 221k and for it's size it has lots of options and customization... must admit takes some time to setup but once you know how to do it its pretty cool... give it a try http://bit.ly/111XAiW
Click to expand...
Click to collapse
Zeam is not developed anymore because it doesn't anything more. I didn't choose it for it's apk size, lightweight means how much RAM it needs to work, not how small the apk is. And I tried lightning too, it is a very good launcher, but it uses much more RAM than Zeam and it needs a bit of work to get it the way you want it. Zeam is an out-of-the-box launcher and that's how I want my ROM to be also I'll keep Zeam for now.
android no.1 said:
screenshot, please!!!
Click to expand...
Click to collapse
Please guys, this thread has only two pages, it's pretty easy to read 15 posts. I said earlier that I didn't post screens because there aren't many changes in the layout in this version. Next version will contain a proprietary theme and I'll post screenshots then.
Warning : Stritcly FORBIDDEN to share MY work on Phonandroid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Architect is some scripts to set your kernel without application and 100% compatible with all Kernels
only if you have a Snapdragon 800 as processor
You can modify :
- governors
- schedulers
- max frequences *
- table of voltages *
* if your kernel have OC/UV options
List of commands
Open an application like Android Terminal Emulator
Start always a session with su + enter ...
Code:
Architect
*that give you some informations and recommandations
Code:
governors
*that will show you all governors available
Code:
name of governor
conservative
interactive
wheatley
ondemand
performance
powersave
userspace
*that will activate the governor of your choice ( say me if you want another )
Code:
schedulers
*that will show you all schedulers availables
Code:
name of scheduler
cfq
deadline
noop
row
sio
fiops
test-iosched
vr
zen
*that will activate the scheduler of your choice
Code:
freq
*that will show you some informations about frequences of your CPU
Code:
freqmax1,3
freqmax1,4
freqmax1,5
freqmax1,6
freqmax1,7
freqmax1,8
freqmax1,9
freqmax2,3
freqmax2,5
freqmax2,7
*That will activate the max fréquence of your cpu : 1,3Ghz to 2,7Ghz
Code:
volt
*That will show your table of voltages CPU
Code:
volt0
*That will set the original table of voltages
Code:
volt-25
volt-50
volt-75
volt+25
volt+50
volt+75
*That will set - or + in mV
that will show you before and after
Warning: the base is volt0
How to have these scripts actived at boot
2 way :
- the folder init.d
- use Script manager
1) init.d
Copy your combinaison, for example :" interactive, deadline, volt-25 and past it in /system/etc/init.d/
Don't forget to be in root explorer and give right permissions *... ( read, write, execute )
You can find all my scripts in /system/bin/
or : Kernel-Architect-scripts.zip
2) Script Manager
Take the application Script Manager on play store
Choose the script, give root access and apply at boot
You can find all my scripts in /system/bin/
or : Kernel-Architect-scripts.zip
*** Kernel Architect-signed.zip ***
Uninstall Kernel Architect-signed.zip
Kernel-Architect-scripts.zip
- Reboot in your Recovery
- Install Architect_Edition-signed
- Enjoy
~~~~~~~~~~~~~~~~~~~~~~~~~
More
Take my TWRP theme :
Our themes1080p
- Download
- Reboot on Recovery
- Install
- Reboot on Recovery
- Enjoy
~~~~~~~~~~~~~~~~~~~~~~~~~
Reserved for OP
First, awesome work, Thanks
Sent from my SM-N900V using Tapatalk
Guess this is strictly for Developers Edition
Sent from my SM-N900V using Tapatalk
jr_718 said:
Guess this is strictly for Developers Edition
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
No, it's for anybody because it's really easy.
I don't like set hardware with app, then for basics settings ( governors, schedulers, frequences and voltages ) I did an easy way to modify without app and then be sure to be compatible.
Don't hesitate to ask me
Ok
Sent from my SM-N900V using Tapatalk
So to put it simple....... is this a custom kernal
johnminator said:
So to put it simple....... is this a custom kernal
Click to expand...
Click to collapse
Nope, it's a script to set clock speed, governer, etc.
It's basically SetCPU or ROM Toolbox's CPU control, or other cpu control apps, without installing an app...
Has this been tried out on a safe strapped device yet? Looks promising might give it a go when I get home tonight. Thanks OP!
so if this is like an app besides it being script what sets this apart from an app like setcpu the gov's??
danutzz said:
Nope, it's a script to set clock speed, governer, etc.
It's basically SetCPU or ROM Toolbox's CPU control, or other cpu control apps, without installing an app...
Click to expand...
Click to collapse
Exactly !
krazy_smokezalot said:
so if this is like an app besides it being script what sets this apart from an app like setcpu the gov's??
Click to expand...
Click to collapse
I believe the idea behind OP creating this is that it may be easier for some to utilize these scripts rather than installing an app to control your kernel's settings.
In my opinion, this thread should belong in development section, but if other devs agree that this provides "significant improvement in the means of operation", then by all means keep it here.
danutzz said:
I believe the idea behind OP creating this is that it may be easier for some to utilize these scripts rather than installing an app to control your kernel's settings.
In my opinion, this thread should belong in development section, but if other devs agree that this provides "significant improvement in the means of operation", then by all means keep it here.
Click to expand...
Click to collapse
I did that because i was tired to search good app ( compatible ) with kernel wanted.
Then this working on every kernel.
Not need app for apply on boot, use folder init.d, I prefer that than an app opened in cache.
I've made this for me and after i said to me : " why not share ? ".
Maybe i'm not in right section, sorry !
NorthLight said:
I did that because i was tired to search good app ( compatible ) with kernel wanted.
Then this working on every kernel.
Not need app for apply on boot, use folder init.d, I prefer that than an app opened in cache.
I made this for me and after i said to me : " why not share ? ".
Maybe i'm not in right section, sorry !
Click to expand...
Click to collapse
Don't get me wrong, this is great work! Thank you for sharing...
On that note though... I always get a little excited when there's a post in "Original" because I think there may have been a breakthrough and we somehow miraculously unlocked the bootloader, or something else ground breaking. This is good and all, but not at the level I was expecting in this section. Again, I could be wrong, if other devs deem this as "Original Development".
Isn't this the right section? Coming from originally a Nexus S back in the day all we had was a section for Original Android Development, when I jumped over to the GS3 there were two sections, original and then just plain development. Plain development was developing roms around manufacturer software I.e. roms based around Touchwiz, or Touchwiz mods. Original Development was based around original designs based of of AOSP, I.e. CM, AOKP, Paranoid Android, etc. In my opinion he has made a custom script that can be used on most kernels, not locked into Touchwiz, making this his Original Android Development, right? That's just my opinion, once again thanks OP for bringing new development and as you said sharing with everyone else!
Anyone got any good recommendations for settings on the stock kernel? I haven't really messed with it because coming from the Gnex bot the performance and battery life of this phone just blow it out of the wager.
Sent from my SM-N900V using Tapatalk
Gil Smash said:
Anyone got any good recommendations for settings on the stock kernel? I haven't really messed with it because coming from the Gnex bot the performance and battery life of this phone just blow it out of the wager.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
What have you as governors and schedulers ?
NorthLight said:
What have you as governors and schedulers ?
Click to expand...
Click to collapse
Stock so row and on demand.
Sent from my SM-N900V using Tapatalk
Gil Smash said:
Stock so row and on demand.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
If you have no choice ... Cannot do something.
Have you flashed my scripts ?
If yes type :
Code:
su
Architect
Do a screenshot and post here please.
What is the point to this compared to trickster mod, kernel tuner, set cpu etc etc??
Hi guys,
since we haven't got any kernel for our omni roms I've decided to make one. For now it's just an alpha but to me seems pretty stable I'm releasing here as a test. Please report what do you think. It's based on "stock" omni kernel with overclock (for now I'm using this commits https://github.com/marco9333/androi...mmit/1d75a501447e609dbb412c350d79ac1ef720a630 and https://github.com/marco9333/androi...mmit/36cf4ca9c78144f336dad4af88049b4a6bf59fac but from next release I'll try @humberos commit https://github.com/humberos/android...mmit/5f768f943d0c420860575e22756b58ff64f0c596 as he suggested See changelog below).
I've tested on Omnirom and @nerdyblonde reported it is working on Carbon, feel free to try on any AOSP based rom (not Samsung based)
Features:
An awful name (I'll try to find a better one)
Different versions for n8000 and n801x
Overclock up to 1600Mhz (booting max freq is 1400Mhz) and underclock to 100 Mhz (booting min freq is 200 Mhz) -> version 0.2 and newer
I've added a (temporary) my commit https://gerrit.omnirom.org/#/c/9555/2 to force cpu frequency range to stock values (I'll decide about merging this in omni rom official builds)
Version 0.1 built with different flags and toolchains but from the next one I'll use only linaro (maybe I'll try sabermod too) See below
See changelog
TODO:
Add fast-charge -> I've almost finished this, I hope to post an update soon (maybe today) DONE
Add underclock (100 Mhz, see humberos commit above) Done.... version 0.2 and up See below
Change installing script to solve possible dialer problems with some roms (unpack modify and repack original boot.img I'll use https://github.com/ModdingMyMind/boot_manipulation but I'll need some time)
Add more schedulers and/or governors (???)
Tell me what would you like to have and I'll think about that
Add thanks to all the developers
DIRECT DOWNLOADS Version 0.6 (LATEST):
N8000 -> https://www.androidfilehost.com/?fid=95784891001603463
N801x -> https://www.androidfilehost.com/?fid=95784891001603462
Link to version 0.5 are removed -> Some tweaks weren't included in the zip so I'm releasing a new version. See second post for changelog
Previous version 0.4:
N8000 -> https://www.androidfilehost.com/?fid=95747613655041727
N801x -> https://www.androidfilehost.com/?fid=95747613655041728
DOWNLOADS FOLDER: https://www.androidfilehost.com/?w=files&flid=19342
HOW TO INSTALL
(*optional) Make a backup (or just keep the original rom zip so you can reflash that to go back to stock omni without losing data)
(*not optional) Use this at your own risk I don't take responsibility for any crash, excessive heat, forced reboot, and whichever problem you could have
Flash the zip in recovery, no need to wipe anything, reboot
Thanks to:
* Omnirom team
* @iofthestorm (is the one who ported and made our devices official with omni)
* @humberos (underclock)
* @Lord Boeffla (overclock)
* @Christopher83 (I'm using his toolchains)
* See my sources on github
CHANGELOG
Version 0.1
Initial release
Version 0.2
Added frandom(See https://github.com/Ryuinferno/frandom-android for reference)
Added underclock down to 100Mhz (Thanks to @humberos)
Added more build flags (Check http://forum.xda-developers.com/showpost.php?p=36693600&postcount=9 for reference)
Version 0.3
Added fastcharge support in kernel drivers(need some testing to check the best currents) -> Disabled by default but can be enabled anytime without reboot(Maybe an entry in Advanced settings??? See next post)
https://github.com/marco9333/androi...mmit/b3e4981b88be28d59ab01052cf3f66d5e411c88b
Added support for ntfs and exfat filesystems https://github.com/marco9333/androi...mmit/27b3a545c6651fc89fd8a1eaf0bc801dc6222b09
Now powerkey should switch the screen on faster (no lag between pressing and screen on) All credits to https://github.com/dsc-team/dsc-team-kernel-project Not working
Added some patches from linaro, they should give more battery juice-> got about +400 points with antutu if you believe in benchmarks... I don't
Version 0.4
Changed mounts flags for system,data,cache and preload (with antutu I had about 300 for storage I/O now is around 980-989 with cfq, got better result with row, test it if you find some improvements)
Added some patches from linaro (see my github)
Increased i2c speed with wacom digitilizer(I'll test this tomorrow)
Increased sampling rate of wacom digitalizer (S-PEN should beis smoother (IMHO))
Added init.d script editable by user to set cpu frequency,fast charge and s-pen tweaks(for now)
Fixed Broken charging animation when the tablet is off (I will merge this into official omnirom after some testing, maybe I'll release here before as a preview, if you're curious https://gerrit.omnirom.org/#/c/9658/) ->
Merged into omnirom, if you're using omnirom now this fix is present "by default", if you have another rom the fix is still installed with the kernel (Report if not working)
Backported xpad driver (xbox, xbox 360 and xbox one controller support) from linux 3.17 (Needs testing)
Backported ps2, ps3, ps4 driver from linux 3.17 (Needs testing)
Other minor changes
Version 0.5
Fix for camera recording and hd video playing (waiting approval approved and merged into official omnirom -> https://gerrit.omnirom.org/#/c/9943/ and https://gerrit.omnirom.org/#/c/9944/)
Reduced hdmi out resolution to 720p and set hdmi audio to 2ch (Quite useless now since hdmi isn't working)
Introduced compiler flags from JustArchi's github and switched to linaro-4.8.4 (should give a performance boost)
Version 0.6
Enabled previous added SMT (http://en.wikipedia.org/wiki/Simultaneous_multithreading)
Patches for conservative and ondemand governors
Added zzmoove governor
Enabled more governors (interactive and adaptive)
Other small changes (check my github)
Source: https://github.com/marco9333/android_kernel_samsung_smdk4412 and https://github.com/marco9333/android_device_samsung_n80xx-common
How to temporary enable fastchargeYou need a rooted device but since you're using a custom rom I assume that you have it
Download a terminal emulator app on google play store
Open it, write su and press enter(superuser or supersu should popup, grant root access)
Write echo 1 > /sys/kernel/fast_charge/fast_charge to enable
Write echo 0 > /sys/kernel/fast_charge/fast_charge to disable
Done
This settings will be reset on startup, if someone is interested I can write a init.d script to set fast_charge on boot just let me know DONE. See below
Stock charging settings AC -> 1800 mAh USB -> 600 mAh
Fast charging settings AC ->1900 mAh USB -> 1500 mAh
How to set kernel parameter on boot (Version 0.4 and up)
You need root and a root browser (like https://play.google.com/store/apps/details?id=com.jrummy.root.browserfree)
Go to /system/etc/init.d and open 99mm_alpha file (it's a plain text file)
All the settings are commented
First section is for cpu frequency set on boot (by default max freq is the stock one so no overclock, try to set it with a kernel app, if everything is alright you can after modify this file)
The second section is about wacom pen, choose the sampling rate you prefe: higher means more smoothness, but possible higher battery consumption
Last section is for fast charge change the 0 in the last line with a 1 to get fast charge enabled at each boot (you should have echo 1 > /sys/kernel/fast_charge/fast_charge)
This is just for omni Rom correct? I rub carbon rom but I'd like to try it.
Sent from my Note 3's big ass screen
smuvman said:
This is just for omni Rom correct? I rub carbon rom but I'd like to try it.
Sent from my Note 3's big ass screen
Click to expand...
Click to collapse
I haven't got time to try on other roms but should work with every AOSP based (like Carbon). You can always try it just flash in recovery: if the boot is ok then it's working, if you got a bootloop you can go to recovery and reflash the whole rom without wiping so you won't lose your data (I think doing a backup is better, just in case)
I can confirm the kernel works on Carbon Rom.. Underclocking works great... I don't overclock though.. Thanks for compiling this for us!
Thanks for taking the time to create it and thanks nerdy for testing
Sent from my Note 2's big ass screen
Unfortunately can't get it to run. Keep getting this fc error.
Running latest carbon rom. I'll wait for the next version. Thanks though. Btw I have the N8013
Sent from my Note 3's big ass screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
smuvman said:
Unfortunately can't get it to run. Keep getting this fc error.
Running latest carbon rom. I'll wait for the next version. Thanks though. Btw I have the N8013
Sent from my Note 3's big ass screen
View attachment 2950595
Click to expand...
Click to collapse
Phone fc is quite strange since you are using a n8013 which don't have a modem. In n801x version of the kernel isn't included the modem driver, so this is the cause of that force close IMHO. You can try two things:
Go to settings-> apps-> all-> dialer-> disable -> reboot and check (now phone app is disabled so it shouldn't crash since is not running)
Or download and flash n8000 kernel. (with the modem drivers so the process can't complain anymore)
I have a N8013 as well.. I didn't get any force closes.. I uninstall all system apps I don't use, the dialer being one of them.. I flashed thru TWRP.. Hope you get it working
Ok that would make sense since I never uninstalled the dialer app. Never needed to lol I will try and report back. Thanks.
Sent from my Note 3's big ass screen
Yea! That did the trick! Thanks guys. Now to tweak!
Sent from my Note 10.1 aka my Mobile Porn Storage Unit
Way to go Marco!! Downloaded and flashed!
Unfortunately this doesn't work on CM11. Tested, and android.phone FCs. :/
Spectral1991 said:
Unfortunately this doesn't work on CM11. Tested, and android.phone FCs. :/
Click to expand...
Click to collapse
If you're using n801x check post #9 http://forum.xda-developers.com/showpost.php?p=55679855&postcount=9
marco9333 said:
If you're using n801x check post #9 http://forum.xda-developers.com/showpost.php?p=55679855&postcount=9
Click to expand...
Click to collapse
I'm using n8000. Tried flashing the related kernel file as well. Still not working on latest CM11.
Spectral1991 said:
I'm using n8000. Tried flashing the related kernel file as well. Still not working on latest CM11.
Click to expand...
Click to collapse
Have you tried to clean Dialer data??
marco9333 said:
Have you tried to clean Dialer data??
Click to expand...
Click to collapse
Couldn't even get there. The FCs happen too quickly. After closing a dialog it immediately appears.
When the message appear do not close the dialog but try to pull down the quicksettings and go to settings from there... If this won't work I'll add a script to kernel zip to clean dialer data (if possible) so you can easily flash directly without further actions
Sent from my Nexus 5 using XDA Free mobile app
Thanks for this Marco, it works great here- Omnirom on a n8013. :good:
Is there any chance you might take over the omnirom development now that iofthestorm is out of the loop? He mentioned he was up for helping someone who was willing to continue the work on it.