Database Develop

[FIX/MOD] Huexxx's Nova v8 Stuff ...

Hi all again!
I've created this thread in order to add fixes and add-ons for Nova v8 ROM.
* Wrong OC Fix:
- This fix restores default freq/volt config in order to restore a blocked system from a exagerated OC/UV.
- Download it form title, flash it at CWM and that's all.
* Huexxx's Nova v8 Mod v1.4:
- This mod modifies nova script in order to:
· Make the navigation inside the script a little bit faster
· Directly view the currently active preset from presets submenu
· Simplifies the custom preset submenu. Now you only have to set the 4 frequencies
· Simplifies too the preset and simple overclock. Now voltages are auto established. (v1.1)
· Adds the possibility to enable/disable AUV (AutoUnderVolt) script on boot
· Adds the possibility to set the Auto UV Depth to control the voltage drop on boot (v1.3)
· Now you can view auvlog instead to run UV once (v1.4)
· Directly view the currently active freq/volt config from overclock submenu. It shows freq(vsel/calib) for each state. (v1.3)
· Directly view the currently active governor from governor set submenu
· Directly view the currently active I/O scheduler from scheduler set submenu
· Optimize a little bit the general aspect​- Adds AUV script:
· Avoid to undervolt the max frequency if it's greater than 1GHz (v1.1)
· Take the lower voltage values from calibrating-recalibrating process to ensure the best UV (v1.2)
· AUV script uses the specified auto UV depth. Setting it to 0 the script ensures that the calibrated voltages are the minimum recommended by smartreflex system without do any undervolting on it (v1.3)
· Optimized timmings to ensure the calibration values are correctly stablished (v1.4)​- Modifies /system/etc/init.d/11nov script to support AUV feature
- If you are using AUV you can see the log at /data/nova/auto/auvlog or within nova script's overclock submenu (v1.4)
- Adds /sdcard/nova/ocfix.zip to flash it if OC goes wrong and get a bootstuck
- Automatically disables SBT on installation (v1.1)
- I recommend to keep disabled SBT (Standby battery tweak) if you're going to use UV or AUV features.
- Feel free to use this mod altough you are not planning to use UV or AUV.
- Download it form title, flash it at CWM and that's all.
* Stock Nova v8 Restorer:
- This package restores default nova scripts and deletes all the extra stuff added by my mod.
- Updated to ensure all is restored with mod v1.3 or later version.
- Download it form title, flash it at CWM and that's all.
* Superuser downgrader:
- This package downgrades Superuser to latest stable 2.3.6.3 version.
- Download it form title, flash it at CWM and that's all.
* Nova v8 Kernel Source Code:
- Nothing to comment, it speaks by itself.
- Thanks to knzo.
Regards!

UV Testing:
* 6 serial Quadrant Standard with Power Tutor Monitoring
I've tested the battery consumption with and without UV in order to see the differences.
The test consists in a 6 serial Quadrant run and 3 times repeated for each configuration.
The common parameters are: 900, 700, 500, 300, InteractiveX, sio, wifi enabled, data connection enabled, wcdma only. In all cases I've rebooted and waited until governor had been settled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looking at the results, the power consumption with AUV activated is lower than the stock situation. LCD and WiFi consumptions are linked to parameters that aren't related to the MPU voltaje; then the interesting results are the power drained by the CPU. Also, the absolute mean quadrant scores shows that there isn't a descent on performance, or better said, the descent on performance is negligible taking into account the fluctuation in quadrant scores.
* Battery lasting with light use
Parameters are: auto UV on boot enabled, 900, 700, 500, 300, InteractiveX, sio, wifi disabled, data connection disabled, gsm 2g only. The use consists on: two or three vioce calls per day, some sms, some photos, some visits to the gallery, the alarm every morning, radio allways on.
Regards.

Thanks, I will download it later
Sent from my LG-P970 using Tapatalk

Hi!
I've added some new stuff to first post!
knzo, feel free to grabs whatever you deem appropriate for your releases.
To say that I'm using UV on boot from two days ago and everything run fine.
Regards!

Hi there I just want to know what do I get basically if I use this mod? haha please answer me as simple as you can bud not that good with this stuff . TIA bud

awesome work!!

Huexxx said:
knzo, feel free to grabs whatever you deem appropriate for your releases.
Click to expand...
Click to collapse
Thanks but no need.
I will completely redo the script for next version.

knzo said:
Thanks but no need.
I will completely redo the script for next version.
Click to expand...
Click to collapse
I hoped this answer!

denclaud said:
Hi there I just want to know what do I get basically if I use this mod? haha please answer me as simple as you can bud not that good with this stuff . TIA bud
Click to expand...
Click to collapse
Basically you get:
- A little bit modified nova script. Little bit faster, with certain things simplified, but fully operational.
- The possibility to try my UV and AUV scripts (If you want...)
- The possibility to restore default OC if things go wrong flashing /sdcard/nova/ocfix.zip
Thats all at the moment.

how make this?
can u explain for me how i put fix mod

jamespvz said:
can u explain for me how i put fix mod
Click to expand...
Click to collapse
Do you have Nova v8 installed?
If positive answer... install this stuff the same way you installed Nova v8... from recovery... install zip from sdcard... select the zip and flash it!
Regards!

Question,
Huexxx, do you have kernel source of Quasar v8?

redy2006 said:
Question,
Huexxx, do you have kernel source of Quasar v8?
Click to expand...
Click to collapse
I just saw your PM while I was about to reply to you here.
Yes, I'll upload it. Give me 30m.

knzo said:
I just saw your PM while I was about to reply to you here.
Yes, I'll upload it. Give me 30m.
Click to expand...
Click to collapse
Thanks. Few days ago when I asked it, I was forgot to PM you... because lots of reading post on XDA forum
Thanks again

http://www.multiupload.com/Z40ZNZAUVI

This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.

PaulBort said:
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
Click to expand...
Click to collapse
No........

PaulBort said:
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
Click to expand...
Click to collapse
If still having problem with SU, then it's better to downgrade SU, because Nova v8 including SU beta version, so perhaps you can use the stable version. Can you apply that, PaulBort?

PaulBort said:
This FIX/MOD solves the problem with the SU? Today, probably, the 25-th time returned with Nova-8 on Nova-4.5, because on a level place hung Dolphin browser. Just once in a run SU-application.
Click to expand...
Click to collapse
Look at first post.
I've repacked the latest stable version of Superuser.
Try it and comment.

Huexxx said:
Look at first post.
I've repacked the latest stable version of Superuser.
Try it and comment.
Click to expand...
Click to collapse
It's not help.
Sometimes bugs present.
For me nova 4.5 last stability version.

[KERNEL][v1.52-STOCK/v2.15-CM10.1-10.2/REV1-STOCK/CM10.2] PH85 REVOLUTION [STOPPED]

OK as i promised i built my kernel.
Before anything i want to thank iodak which gives us nice codes and nice ideas i never took alone, laufersteppenwolf and kholk.
The code is substantially the iodak v1 code but i added some bugfixes from externity project and some Werewolf kernel features.
I'm not the "author" but just for the community i "mixed" all the best i can found actually in the net and during the time i'll research and add some interesting feature i'll found.
The new Revolution version is based on Demetris codes (Optimus Prime-play) but indeed i mixed most of the codes i found on the net.
CHANGELOG and UPDATES
Initial features:
- Same as iodak v1
- CPU at 1.7 ghz
- Optimized ksem algorithm [by Ezeekiel]
- Gpu clock interactive regulation, max frequence 766 mhz but i suggest to not go more than 600 mhz
- Added gaming and pmc cpu governors [Thanks Laufersteppenwolf]
- Temp throttle skin raised at 48 ° C and cpu throttle frequence increased at 1300 mhz
- Lot of bugfixes from Linux developers
V1.5
- implemented uhid support (for usb peripheric but i can't test it)
- modified freeze-wake-standby system (thanks TripNRaVeR)
- added araragi fix for wakelock
- various bugfixes and tweaks
- added cpu topology definitions, new voice in trickstermod for powersaving
- rebased clock table on multiple of 102 mhz for cpu_0 and cpu_g
- some other tweaks and bugfixes
V1.51
- Improved cpu topology code
- Restored interactive number of active cpu selectable
- other various bugfixes
V1.52
- added cfg i/o scheduler
- some other little patch and bugfix
V1.55 "BE CAREFUL, THIS IS NOT STABLE FOR ALL PHONE, I CAN JUST TELL IT'S REALLY STABLE ON MINE"
- raised voltages
- added fastcharge
- rebased all cpu clocks
- unlinked gpu
- raised some clocks
- compiled with Linaro toolchain gcc 4.7.3 13.04
V2
- Various bugfixes from different authors in the net
- Lot of commits from TripNraver optimized kernel for HTC ONE X
- Zram updated with Snappy google compression, it should give more i/o speed
- araragi features with the new inspired by kholk Livecolor code
- HTC ONE X clock table
- LP core voltage table editable in Trickster mod
- Enabled Swap
- Enabled 100 200 and 300 mhz clock step usable
- OC for gpu and ram
- Compiled with Linaro toolchain 4.7.4 and optimizations
- UKSM script ported from 3.0 kernel
- Restored stock thermal framework
V2.1
- New thermal tweaks from demetris
- balanced cpuquiet governor from demetris
- enabled zcache (thanks faux)
- Xpad support
- some other thing not worth to be explained here
- FOR ANDROID 4.3 only atm !!!!!
REVOLUTION 1
- Rebased entirely on Demetris' Optimus Codes
- Less controls in trickstermod, just cpu Voltage
- gpu at 520 mhz
- no more overclock since it's not stable with this code
- all the features of optimus primes except cpuquiet selectable governor
- huge number of patches and bugfixes
- need your feedback for stability
PRE-REQUIREMENTS
UNLOCKED BOOTLOADER, ROOT AND RECOVERY!
HOW TO INSTALL
1 Download the KERNEL version which fits with your needs
2 Copy the zip to your sdcard
3 Boot into recovery
4 Flash the zip
5 Wipe cache/dalvik (not required everytime)
6 Reboot
Download Links:
REV 1 05/09/2013
Stock REVOLUTION 1 link: https://www.dropbox.com/s/cxw92g7w8rx7cu7/PH85_REV1_KERNEL_STOCK_P880.zip
CM10.2 REVOLUTION 1 link: https://www.dropbox.com/s/acmnidv4bl7s4az/PH85_REV1_KERNEL_CM10.2_P880.zip CM10.2 VERSION NEEDS TO BE FIXED
PH85 old project
Stock best version v1.52: https://www.dropbox.com/s/ia0ohxouure2q1z/PH85_KERNEL_P880_V1.52.zip
- Bluetooth not working fine in following versions but it has great performances
CM10.1 version v2.15 : https://www.dropbox.com/s/bypkitzbm2b507o/PH85_V2.15_KERNEL_CM10.1_P880.zip
CM10.2 version v2.15 : https://www.dropbox.com/s/8s8ezn4ffbhgg6e/PH85_V2.15_KERNEL_CM10.2_P880.zip
My github
Original PH85 project: https://github.com/Pesach85/ph85-p880-kernel-project
Revolution 1 project: https://github.com/Pesach85/lge-kernel-p880
THANKS
I want to thank all the XDA community and all people which trasmitted me the passion to compile by myself a kernel and add features
People which i met here in xda from long time like berni and iodak and new developers i met here in p880 section like demetris, laufersteppen wolf and many other i can't nominate here.
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

First a question: is it for stock or CM?
Then, do I get you right that this is kernel is more-less cherry-picked?
But anyways, thanks for your work
Sent from my LG-P880 using xda premium

If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is
Anyway yes almost it is.
Follow my github to see what i change
Sent from my LG-P880 using xda app-developers app

Pesach85 said:
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is.
Anyway yes almost it is.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Yeah, that's what it means
It comes mainly from git, where you've got the ability to "cherry-pick" single commits
BTW, your github it down
Sent from my LG-P880 using xda premium

I not use exactly cherry pic function i use the old fashioned way copy-paste because i feel more comfortable with
You should see the commit with github app anyway
Sent from my LG-P880 using xda app-developers app

Tested it, and it appears that mobile data aand wifi are not working. It also lags at times when I unlock the screen. Everything else is ok though.

All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it

Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.

Pesach85 said:
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Click to expand...
Click to collapse
Gpu overclocking helps the odd game, MC4 for example
Sent from my rooted P880

Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app

emre81tr said:
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Use tefminal emulator, you can flash it from there

Flying_Bear said:
Use tefminal emulator, you can flash it from there
Click to expand...
Click to collapse
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app

Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
how solve baseband xmm wakelock issue?

View attachment j794_root.rar
emre81tr said:
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
1.download j794_root (if u dont have)
2.Extrat it
3. open the Extracted folder
4. j794_root/root/ copy the img file here.
5. go back and right click root folder by holding on SHIFT key.
6. Select "Open command windows here"
7. now you can type the commend in the instruction on command window i.e
Code:
adb push phv1boot.img /sdcard/
adb shell
su
cat /mnt/sdcard/phv1boot.img >/dev/block/mmcblk0p2
sync
reboot
Before doing this make sure the kernal iodakv2 is installed
Good luck:good:

I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.

dann1989 said:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
Click to expand...
Click to collapse
Download trickster mod kernel settings, you can use this to raise the max gpu threshold
Sent from my rooted P880

plz cvm instaled

Whether there are improvements in battery?

Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium

emre81tr said:
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
This kernel is not made for Cmod
Sent from my rooted P880

[TOOLs] 29/09 My mods/tweaks for Googy Max 1.* Kernel Sammy 4.1.2

Hi all, this is my first thread and all I want is to share some mods/tweaks/info for googy max kernel that I have done
[Script/Widgets] STweaks profiles fast-switching
It enables users to have 3 widgets in your home screen which one corresponding to a different Stweaks profile, one click and puuuuf...profile changed
Install "Script Manager - SManager" and "SMWidgets" from google play
Create 3 scripts in your sdcard folder named:
battery.sh
Code:
#!/system/bin/sh
echo "battery" > /data/.googy/.active.profile
sh /res/uci.sh apply
echo "default" > /data/.googy/.active.profile
echo "battery" > /data/.googy/.googy.profile
cp /data/.googy/battery.profile /data/.googy/default.profile
balanced.sh
Code:
#!/system/bin/sh
echo "balanced" > /data/.googy/.active.profile
sh /res/uci.sh apply
echo "default" > /data/.googy/.active.profile
echo "balanced" > /data/.googy/.googy.profile
cp /data/.googy/balanced.profile /data/.googy/default.profile
performance.sh
Code:
#!/system/bin/sh
echo "performance" > /data/.googy/.active.profile
sh /res/uci.sh apply
echo "default" > /data/.googy/.active.profile
echo "performance" > /data/.googy/.googy.profile
cp /data/.googy/performance.profile /data/.googy/default.profile
Open SManager and locate your 3 scripts, click on them and mark them as favourite and root
Put 3 "SMWidget" widgets in your home screen and link them to your 3 scripts, mark them to run in background when prompted
Scripts are also in download section
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[CWM] Dual boot recovery (2nd rom utils)
It's a cwm zip package that install googy max dual boot recovery to recovery partition permanently. It's useful for users with root/STweaks problems who aren't able to boot into 2nd rom utils by opening STweaks.
[CWM] Googy max kernel settings clear
It's a cwm zip package that clears kernel configuration files and restore default settings after next boot. It's useful for people that are facing boot-loops caused by bad kernel settings applied at boot, like excessive undervolt.
[Script/Widget] Zram stats up to 4 disks
It's a shell script that shows current googy max profile applied, swappiness value, global ram and zram stats, individual zram disks stats, global zram compression rate, etc... It could be called by a terminal emulator or by a widget (the same way like with profile fast-switching, but this time we don't choose to run in background when prompted)
NOTE: there are some number differences while read zram info with free command and by using /sys/block/zram* interface (I converted Bytes to MBytes by dividing twice by 1024 )
[CWM] Busybox mod with more busybox commands
It's busybox binary version 1.21.1 which supports more commands like ifconfig.
It persists after kernel re-flashing, uses init.d :good:
[Info] CPU and GPU undervolt values that I use and are stable (to me )
CPU values (MHz->mV):
1600=1338
1500=1275
1400=1225
1300=1188
1200=1125
1100=1075
1000=1000
900=950
800=900
700=888
600=863
500=838
400=825
300=800
200=800
GPU values (MHz->mV):
54=750
108=775
160=800
266/275=825
350=850
440=925
533=1000
640=1075
700=1125
[Info] Battery saving
Useful when we are running out of power. I use an Anker 2200 mAh battery with NFC antenna, it does the trick with this settings (remember that googy implemented profiles in stweaks):
Set zzmove battery governor
Set cpu max freq to 800mhz
Undervolt 200-800 Mhz cpu freq steps voltages by -100 mV or set the ones that I use (see above)
Set GPU freq to 54,108,160,266,275 MHz and voltages to the ones I use (see above)
Disabe zram (to avoid lags, cpu low freq)
Now save that settings to your battery profile and apply, now some extra settings:
Use auto-brightness with bright set to 25-30%
Use GSM only
Turn off localisation services
Use data network only when necessary (try to have it disabled)
With that and Anker battery I got 9H on screen time (note: used the phone only for sending sms, no wifi, no data, no gps, brightness at minimum a lot of time).
Thanks:
- @googy_anas for encourage me for doing this
DOWNLOADS
PS: If you liked my work, hit tanks please! And feel free to pay me a beer/coffee

First one here
Congratulations !!!

Nice tweaks and mods :good:
Obrigado
P.S. that's some serious UV, my phone cant handle half of that xD

very good job. Thank you very much

googy_anas said:
First one here
Congratulations !!!
Click to expand...
Click to collapse
ahah
Thanks

kaza said:
Nice tweaks and mods :good:
Obrigado
P.S. that's some serious UV, my phone cant handle half of that xD
Click to expand...
Click to collapse
I use that settings with default ABB settings
De nada :good:

mrjoy said:
very good job. Thank you very much
Click to expand...
Click to collapse
You're welcome
:good:

Verrrrry nicceeee!!! Thanks a lot :thumbup:
Sent from my HTC One X using xda premium

Keep up the great work my friend , thanks a lot for your time and effort.
Enviado do meu GT-I9300 utilizando Tapatalk 4

thanks for opening and sharing theses mod's continue

http://forum.xda-developers.com/showthread.php?t=2119761
can we use these profiles with our kernel.. are these safe?? anyone tried?

rahulbalmuri said:
http://forum.xda-developers.com/showthread.php?t=2119761
can we use these profiles with our kernel.. are these safe?? anyone tried?
Click to expand...
Click to collapse
Do not use it! Some settings could be ported, but simply tweak googy kernel profiles as you want and save it as different profiles...

how to remove dual recovery mod

salman_dude said:
how to remove dual recovery mod
Click to expand...
Click to collapse
Flash a new recovery like philz touch or other cwm recovery... It will overwrite yoir current recovery

PedroMedeiros said:
Flash a new recovery like philz touch or other cwm recovery... It will overwrite yoir current recovery
Click to expand...
Click to collapse
thnx

Thanks for your tips on battery saving!!
Following your instruction, I set my kernel config, 14hrs passed, no reboot, no freeze, still maintain good response (I never play games)
14hrs standby, 40mins screen on, 79% battery left (95-79=16% loss), even regular auto sync in bad signal area.

PedroMedeiros said:
Flash a new recovery like philz touch or other cwm recovery... It will overwrite yoir current recovery
Click to expand...
Click to collapse
I flashed the .zip file in CWM, looked on Stweaks and nothing seem to have changed, any suggestions?
Jack

JackHanAnLG said:
I flashed the .zip file in CWM, looked on Stweaks and nothing seem to have changed, any suggestions?
Jack
Click to expand...
Click to collapse
what exactly you trying to do? changing a recovery shouldn't change anything in stweaks

2rgman said:
what exactly you trying to do? changing a recovery shouldn't change anything in stweaks
Click to expand...
Click to collapse
OH. In my mind i thought if i flashed one of your downloadable .zip files ( Googy max kernel settings clear by pedromederios ) it would apply what youve done on your Stweaks..
Although ive done most of the things in the post already using Stweaks, ill let you know how it goes!

JackHanAnLG said:
OH. In my mind i thought if i flashed one of your downloadable .zip files ( Googy max kernel settings clear by pedromederios ) it would apply what youve done on your Stweaks..
Although ive done most of the things in the post already using Stweaks, ill let you know how it goes!
Click to expand...
Click to collapse
OK, I thought you flashed a recovery, flashing "Googy max kernel settings clear" should reset stweak settings to default, so you say after flashing this file stweaks settings stay the same?

[MOD] Architect_Edition : * Set your kernel without application * and more *[SCRIPTS

Warning : Stritcly FORBIDDEN to share MY work on Phonandroid
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Architect is some scripts to set your kernel without application and 100% compatible with all Kernels
only if you have a Snapdragon 800 as processor
You can modify :
- governors
- schedulers
- max frequences *
- table of voltages *
* if your kernel have OC/UV options
List of commands
Open an application like Android Terminal Emulator
Start always a session with su + enter ...
Code:
Architect
*that give you some informations and recommandations
Code:
governors
*that will show you all governors available
Code:
name of governor
conservative
interactive
wheatley
ondemand
performance
powersave
userspace
*that will activate the governor of your choice ( say me if you want another )
Code:
schedulers
*that will show you all schedulers availables
Code:
name of scheduler
cfq
deadline
noop
row
sio
fiops
test-iosched
vr
zen
*that will activate the scheduler of your choice
Code:
freq
*that will show you some informations about frequences of your CPU
Code:
freqmax1,3
freqmax1,4
freqmax1,5
freqmax1,6
freqmax1,7
freqmax1,8
freqmax1,9
freqmax2,3
freqmax2,5
freqmax2,7
*That will activate the max fréquence of your cpu : 1,3Ghz to 2,7Ghz
Code:
volt
*That will show your table of voltages CPU
Code:
volt0
*That will set the original table of voltages
Code:
volt-25
volt-50
volt-75
volt+25
volt+50
volt+75
*That will set - or + in mV
that will show you before and after
Warning: the base is volt0
How to have these scripts actived at boot
2 way :
- the folder init.d
- use Script manager
1) init.d
Copy your combinaison, for example :" interactive, deadline, volt-25 and past it in /system/etc/init.d/
Don't forget to be in root explorer and give right permissions *... ( read, write, execute )
You can find all my scripts in /system/bin/
or : Kernel-Architect-scripts.zip
2) Script Manager
Take the application Script Manager on play store
Choose the script, give root access and apply at boot
You can find all my scripts in /system/bin/
or : Kernel-Architect-scripts.zip
*** Kernel Architect-signed.zip ***
Uninstall Kernel Architect-signed.zip
Kernel-Architect-scripts.zip
- Reboot in your Recovery
- Install Architect_Edition-signed
- Enjoy
~~~~~~~~~~~~~~~~~~~~~~~~~
More​
Take my TWRP theme :
Our themes1080p​
- Download
- Reboot on Recovery
- Install
- Reboot on Recovery
- Enjoy
~~~~~~~~~~~~~~~~~~~~~~~~~
​

Reserved for OP !

gret work Bro !
Now trying on my G Flex !

wolfgart said:
gret work Bro !
Now trying on my G Flex !
Click to expand...
Click to collapse
Thanks mate
Give me feedback.
If miss governors or schedulers let me know.

Thanks mate.
Great work :good:

awesum sauce man, once I root I am all over these!

Can I ask how this differs from current CPU management apps? What u list here, I seem to be able to manipulate with Setcpu... Just for my knowledge .... Thanks fellas!

canecbr600 said:
Can I ask how this differs from current CPU management apps? What u list here, I seem to be able to manipulate with Setcpu... Just for my knowledge .... Thanks fellas!
Click to expand...
Click to collapse
This mod will allow for all your specified kernel settings to load at boot via androids init.d. Apps like Trickster will load up in system memory after the OS has booted and will then apply the modifications you specify. You could say that scripts like this are "cleaner" ways of applying tweaks as it is done during boot naturally through the OS and negates the need to have an additional app starting and running in the background. That being said, init.d scripts are not as user friendly as apps like Trickster and could take some time to get used to if you don't have much experience with them. The scripts may also increase boot time but will most likely be a negligible amount.

Great job bro and thanks for sharing. Awesome Awesome theme too! Such perfect timing as I'm getting into using scripts so this will really help guide me as well!
Sent from my LG-D800 using XDA Premium 4 mobile app

hey dev if its ok ...can i try this on lg optimus g pro?,....i would propley give u all the credit!!!!

bountyman334 said:
hey dev if its ok ...can i try this on lg optimus g pro?,....i would propley give u all the credit!!!!
Click to expand...
Click to collapse
No, just commands for governors and I/O schedulers will works.

hi,
this mod is not working for me, could anyone please upload the uninstallation zip, as the links are dead

[KERNEL][G800H/HQ] TW & CM TardisKernel 1.5 ULTIMATE edition cpu/gpu OC and tweaks

UPDATE 05/01/2016
Ok another update, havent managed to fix usb forced charge or otg yet but am looking at those, this build has got some interesting features though
Code:
Sound Control Mod to improve sound quality
Init.d Support
ZRAM Enabled, use one of te many apps in play store to activate it.
---------------------------------------------------------------------------------------------------------------------------------------------
MINOR UPDATE 04/01/2016
Only a small bugfix release, trying to fix usb force charge and fix a broken wifi. new build is up now at links below
TW Kernel
CM Kernel
-----------------------------------------------------------------------------------
UPDATE 03/01/2016
Yet another Update folks, this one is small and only adds a couple of things
Code:
Add USB Forced Fast Charging support (google for info)
Add a Build that works on Cyanogenmod also
for each version released (from 1.3) their will be 2 seperate zip files, one will have TW in the name and one will have CM
the TW Version WILL ONLY work on touchwiz roms
and the CM version will work on Cyanogenmod based roms
have tested on CM 12.1 and it works and seems to fix a few bugs aswell apprently
nice short one for today
any questions or requests are welcome and feel free to let others know about these kernels
zips are in the download section or available here :
TW 1.3 Build:
CM 1.3 Build:
--------------------
UPDATE 02/01/2016
New update Released today folks.
new features added
Code:
600mhz GPU Overclock
New I/O Schedulers added
New CPU Governors added
Added a few Different Hotplug drivers to hopefully aid Battery life
Entire kernel is built using the Hyper-Linaro 5.1.1 Toolchain with -O3 and graphite enabled for extra performance and general smoothness
Bit More coding has been worked on for OTG support but this is not working yet if anyone has any ideas or can help with OTG support please contact me as i am a bit stumped on this at moment
download zip file in the downloads tab or from :
currently 1.8ghz seems to be the highest Overclock possible on the cpu as anything more than that fails to boot. still looking into it
any questions or suggestions are welcome
donations are much appreciated also
--------------------------------------------------------
Hello All, and welcome to 2016
got a nice new update for the snapdragon variants of the S5 Mini (g800h/ds/hq etc) and this kernel is as far as im aware quite unique across any device using the msm822x cpu. so you are all going to be part of a very special group for trying this one, that group is going to be the serious overclock group, this kernel overclocks not to 1.6ghz, not to 1.7 ghz but all the way to 1.8 ghz currently, and unless someone can let me know otherwise this is the fastest speed i have seen from a msm8226/8 based device. even the 2nd generation moto g only has a 1.6ghz clock.
changelog overall for this kernel from stock is :
Code:
Boosted Notification LED Brightness as default is quite dim apprently
Added UKSM(Ultra-Kernel Samepage merging) for performance and memory management
added interactive cpu governor
Enabled Fading LED Notification Light
Removed pretty much all debugging junk from kernel as its not needed
switched to linaro 4.9.4 compile with cortex a7 optimization
[strong]1.8Ghz CPU Overclock[strong]
550mhz GPU Overclock
100mhz Base GPU Clock (battery saving FTW)
zzmoove CPU governor
Few different I/O governors including FIOPS and BFQ
SU supported and have disabled samsungs stupid rooting protection
thanks again to sasukesama for testing this one, and again risking his device for it.
check the downloads tab for the files, i have created an update zip aswell as the standard img file and replacement wlan.ko for those who want to do them manually, i HAVE NOT created an odin file for this.
please remember to backup before flashing and i can not promise it will work on your device due to the silicon lottery when it comes to cpus etc.
any questions please feel free to ask
THIS WILL WORK ON TOUCHWIZ 5.1.1 ONLY AT THE MOMENT
XDA:DevDB Information
TardisKernel 1.5, Kernel for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, sasukesama
Source Code: https://github.com/DJSteve/g800h_custom_kernel
Kernel Special Features: Major CPU overclock, performance and powersaving tweaks
Version Information
Status: Testing
Created 2016-01-01
Last Updated 2016-11-20

Download link

luki2411 said:
Download link
Click to expand...
Click to collapse
Up in the download tap

have also added link to the zip file on my dropbox to the first post

1.8.. just wow. i'll make a backup and try this
can you make 600~mhz gpu o/c ?
edit// found some -things- in build.prop
mpq.audio.decode=true
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
ro.semc.enhance.supported=true
persist.service.enhance.enable=1
ro.semc.clearaudio.supported=true
persist.service.clearaudio.enable=1
ro.sony.walkman.logger=1
persist.service.walkman.enable=1
ro.somc.clearphase.supported=true
persist.service.clearphase.enable=1
setprop htc.audio.global.state=0
htc.audio.lpa.a2dp=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.enable_dmic=1
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
ro.ril.enable.amr.wideband=1
ro.config.hw_dolby=true
lpa.releaselock=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
dolby.stereospeaker=true
dolby.flag=true
Click to expand...
Click to collapse

I havent looked at gpu oc yet theirs a few things gpu related i want to check out anyway so its next on list
Sent from my SM-G800F using Tapatalk

Ahmetay said:
1.8.. just wow. i'll make a backup and try this
can you make 600~mhz gpu o/c ?
edit// found some -things- in build.prop
Click to expand...
Click to collapse
Because my build.prop is in the zip :v he used it to disable secure storage
and my build.prop isnt stock
ive add those linse to use dsp + and dolby atom to increase the sound so dont mind :v nothing bad

sasukesama said:
Because my build.prop is in the zip :v he used it to disable secure storage
and my build.prop isnt stock
ive add those linse to use dsp + and dolby atom to increase the sound so dont mind :v nothing bad
Click to expand...
Click to collapse
i've edited it before flashing, but didn't deleted them..
i tried to use them but it didn't work, what did you use? can you send a link? i have a audiotechnica cks-77x, need to use it with full potential

so ill assume people are having success with this update

Ahmetay said:
i've edited it before flashing, but didn't deleted them..
i tried to use them but it didn't work, what did you use? can you send a link? i have a audiotechnica cks-77x, need to use it with full potential
Click to expand...
Click to collapse
antutu score:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bonus//
when i insert a usb-otg flash memory
and when i just.. wait.

Ahmetay said:
antutu score:
bonus//
when i insert a usb-otg flash memory
and when i just.. wait.
Click to expand...
Click to collapse
Ive used the barebone cleaner
it has some mods to install including the audio boost

new build is now up folks, see first post for changelog and download links

DJ_Steve said:
new build is now up folks, see first post for changelog and download links
Click to expand...
Click to collapse
Thanks its so smoth

luki2411 said:
Thanks its so smoth
Click to expand...
Click to collapse
Great to hear its an actual noticable improvment in smoothness
Sent from my SM-G800F using Tapatalk

Yes it is its fast like newer befor thanks

luki2411 said:
Yes it is its fast like newer befor thanks
Click to expand...
Click to collapse
Your most welcome
i would be interested to know how the battery life has changed with all the tweaks
Sent from my SM-G800F using Tapatalk

It's possible to implement a charger current control?

Vithalvess said:
It's possible to implement a charger current control?
Click to expand...
Click to collapse
I can certainly take a look at adding that
Sent from my SM-G800F using Tapatalk

Does this work on CyanogenMod for g800h ?

Its touchwiz only currently. Suppose ill have to make a version for cm at some point(i actually prefer stock over any form of cm. Cm is too bloated imo now
Sent from my SM-G800F using Tapatalk