Hi all I was trying to update my firmware vie Kies and my computer froze up during the load. Now my tab is stuck at Android system recovery with an error message "E:failed to mount /cache (invalid argument)
I tried firmware recovery with kies but it doesn't show any failed attempts and it is asking for a recovery code.
I downloaded the stock firmware from matcl.com and tried to reinstall with Odin. It says success, but I still have the same error on my TAB. I tried wipe data/factory reset and wipe cache partition and try to reinstall but still nothing.
When I wipe data cache partition I get the error "E:forrmat_volume: rfs format failed on /dev/block/stl111"
Any help or suggestions would be greatly appreciated.
Update
I tried to flash HOME_M180L.TF24.1533_CL319576_REV03_user_low_ship.tar with odin and no pit file, same result
I tried to flash tegrak-kernel-build-19-for-M180L-ED25.tar to attempt recovery, now I get failed to mount /system. errno= invalid argument
If I re-flash the HOME_M180L.TF24.1533_CL319576_REV03_user_low_ship.tar I get back to the /cache error
From research I believe that the partitions are all screwed up but I haven't found a way to restore them.
Any help would be appreciated
Does anyone know the right pit file to go with the stock firmware? My firmware was 2.3.4 before it got all screwed up.
I took it to the Samsung service center today, they say the main board needs replaced, can a failed kies update do that?
hello ppl i have
model number: SHW-M180s
firmware version: 2.2
baseband : Unknown
kernel : 2.6.32.9 [email protected]#1
build number : FROYO.EA26
now i cant make phone call please help
I have full stock ROM SHWM180L LG U+ ! Contact me now!
I have pit file
Sent from my SHW-M180L using xda premium
minhkhue90 said:
I have pit file
Sent from my SHW-M180L using xda premium
Click to expand...
Click to collapse
Hi
I have one M180L have same issue
Please can you send me the pit file and if possible a link to the stock firmware
stock and rooted roms for shw-m180s
stock and rooted roms for shw-m180s
if you need any of the files in the pictures i posted just ask
Please upload full firmware with pit file for SHW-M180S
troyanec said:
Please upload full firmware with pit file for SHW-M180S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1249200
the latest would be SHW-M180S UC27
check to link from above's thread. the link would be in korean but all you need to do is download all zips and join them with 7-zip or ALZip (both available at CNet).
wilksy1 said:
if you need any of the files in the pictures i posted just ask
Click to expand...
Click to collapse
Hello,
I recently got a SHW-M180S and want to flash an ICS rom and root it. I've been searching but can't find really good info.
But I find your post and see some hope. Please, can you send me a link to download the ICS rom for SHW-M180S and some instructions in english on how to flash it?
I don't have root access on the TAB and I also want it.
I will be very glad.
Thanks in advance and best regards.
samsung anycall galaxy tab (shw-m180L)
wilksy1 said:
if you need any of the files in the pictures i posted just ask
Click to expand...
Click to collapse
help please, ihave a broken samsung anycall galaxy tab (shw-m180L) which have been flashed with a wrong files and now whenever i open it, it stucks in the welcome, help idonot know what todo, im a noob here
also i have another samsung anycall galaxy tab (shw-m180L) which is fresh and working, is there a possibility that i could copy the firmware or the files of the fresh samsung anycall galaxy tab (shw-m180L) and flash it in the broken samsung anycall galaxy tab (shw-m180L)?
will it work? and how would i be able to do it?
HElp please :,(
Related
Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Can anyone help me?
Mabumap2k6 said:
Hello all, I have a Galaxy S M110S (Korean version) from Anycall
Few days ago, I flashed it with i9000 firmware (XXJP3). It passed but it didn't recognize my Sim card so I can't make any phone call or SMS.
How can I recovery M110S firmware.
I have some firmware for this (DH07, DH09, DH19)... but when I flash it with Odin, it always fail. I tried with the pit file 512 or 513, tick & untick at re-partion but the same error appear.
Can anyone help me?
Thanks a lot!
Click to expand...
Click to collapse
No need to use PIT file - put firmware file (DH19 etc) into PDA field
Dont change any options
If your Korean i suggest to check out - matpclub.com - korean smartphone community
I fixed my bricked phone using JP3 firmware from samfirmwares.com and the Korean Froyo 2.2 update (which I found in Google)and used Odin. I'm pretty sure its not supposed to work but it did for me and now I have Froyo on my Samsung Galaxy S Shw-m110s The only problem now is there are two boot screens. The Regular galaxy S boot up and the Korean one lol
brother u have any link for this phone ı have same phone korean galaxy
my shw m110s anycall
i flashed it by odin flasher it was dg24
i flashed it with dg23 firmware and then it field i dont know what to do
plz help me
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
No links to show PIT M110S
mhammadleo said:
hi to all
the solve for this problem is using the Special
SHW-M110S Recovery Zip
from this site and use odin3 1.82 and change the bootloader
the bootloader is in the you download from the site and as to pit file
there's 2 pit file use m110s.pit
I try it from 2 min and it's work's fine
salam
Click to expand...
Click to collapse
hi, i cant find any recovery zip and i cant find m110s.pit...
links not work.
it really works fine?
please, tell me at greater length how i need to do to fix my phone, thank you
sorry my english(
karabey said:
Flash and PIT File for Samsung M110s
http://www.filesonic.com/folder/fa10d9e502c92717b
Click to expand...
Click to collapse
Hi mate link is not working please can u give me working link?
THANKS
Hello Guys
Well i have m110s 16 gig and it has ginberbread installed couple of weeks back i was copying files and it screwd my phone and since then it gives me an error that damage internal sd card. Guys ofcourse it's not hardware issue because i have seen the motherboard of m110s and thre is CHIP(rom) in there for storage and if i can flash my phone with different vertion of rom back and forth then it means the memory works just fine. I belive it could be problem with partion. because i can see only 98 mb of space which it allocates for cahe. I think possible solution could be stock Pit file or Bootloader or both of them. if i flash it with stock files i guess things would get ok.
But seriously guys it's annoying me now as i can just use it as phone and not smartphone.Can you guys help me out in this.
Thanks
Hi, Im new here, Im trying to upgrade my Galaxy S Advance GT-I9070 from 2.3.6 GB to JB using ODIN, I accidentally downloaded the .tar file for Galaxy S2 GT-I9100, upgrade failed, now my phone is soft bricked, Kies cant recognize my phone for recovery, I read some tutorials to unbrick it using ODIN, cant find the right path/file to do it.
heres what I see in after pressing Vol Down/HOME/Power:
ODIN MODE
Product Name: GT-I9070
Custom Binary Download: No
Current Binary: Samsung Official
what files I need to download to restore it back to GB then upgrade to JB? Thanks in advance!
Problem Solved: I downloaded "I9070DXAMD1_I9070OLBAME1_HOME.TAR.md5" and install it, it worked!
Mods Pls close, thanks XDA!
You was lucky, it could be hardbrick. Never flash other phones firmware.
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do
hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image
How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?
ENter all the 3 files without PIT! and tell again!
Greetings
I have a Samsung Galaxy Tab 7, P1000. I gave it to my brother and he was using it for some time and upgraded android 4.0.x
Some of the functionality was not working. I thought I will upgrade to KitKat
After googling found solution here
goo.gl/JndEj0
hygoandroid.com/2014/02/how-to-update-samsung-galaxy-tab-gt.html
[Sorry I am new and I am unable to post URL]
How to update Samsung galaxy tab GT-P1000 to Android Kitkat 4.4.2 CM 11 Step by Step - HYGO ANDROID
Since the Gingerbird firmware available is not for SIngapore, I downloaded the Firmware from (Samsung-Update)
goo.gl/iUc93G
and Used Singapore version
and PIT file as per the link in HYGO ANDROID
Using Odin3 V1.7 while uploading mistakenly I used the .PIT file and CF_Root file instead of Ginger Bird Firmware
Since it did not boot I realzied my mistake and uploaded the correct Gingerbird file including .PIT file
Upon rebooting, I tried to Wipe cache, it is working successfully
When I tried Wipe data/Factory Reset I get the following message
E:format_volume: rfs format failed on /dev/block/stl10
What does this error mean? How do I resolve?
Thank you and appreciate your help
try this
ramsforums said:
Greetings
I have a Samsung Galaxy Tab 7, P1000. I gave it to my brother and he was using it for some time and upgraded android 4.0.x
Some of the functionality was not working. I thought I will upgrade to KitKat
After googling found solution here
goo.gl/JndEj0
hygoandroid.com/2014/02/how-to-update-samsung-galaxy-tab-gt.html
[Sorry I am new and I am unable to post URL]
How to update Samsung galaxy tab GT-P1000 to Android Kitkat 4.4.2 CM 11 Step by Step - HYGO ANDROID
Since the Gingerbird firmware available is not for SIngapore, I downloaded the Firmware from (Samsung-Update)
goo.gl/iUc93G
and Used Singapore version
and PIT file as per the link in HYGO ANDROID
Using Odin3 V1.7 while uploading mistakenly I used the .PIT file and CF_Root file instead of Ginger Bird Firmware
Since it did not boot I realzied my mistake and uploaded the correct Gingerbird file including .PIT file
Upon rebooting, I tried to Wipe cache, it is working successfully
When I tried Wipe data/Factory Reset I get the following message
E:format_volume: rfs format failed on /dev/block/stl10
What does this error mean? How do I resolve?
Thank you and appreciate your help
Click to expand...
Click to collapse
I have had issues with similar files. I would suggest that you go to the thread where you downloaded the Overcome kernel and you will see the download for GB_Stock_Safe_v5.zip. Try >>> Here thread by @sos_sifou
Ensure that you have copied all of the data you require off your internal SDcard (Try mounting the card in recovery if you are unable to boot your device - Overcome kernel should allow this very easily)
Put the device into download mode, Use Odin 1.7 (only use this version)
select the same pit gt-p1000_mr.pit as PIT (naturally) and then choose GB_Stock_Safe_v5.tar as PDA, and then choose JP4 modem (or similar - what ever is best for your region)
Flash your device.
If you have troubles or brick your device (it happens - I must have done it at least 30 times last week ) then download Heimdall Oneclick Unbrick by Adam Outler >>> here. You will probably need this so you should download it anyway.
Originaly Posted By Jarmezrocks http://forum.xda-developers.com/member.php?u=3857816
Hi,
tried firmware updation using odin v.1.82..Now i cant find recovery mode.only download mode.while trying flash with Aries_P-SBL.tar phone shows invalid bootloader!!
please give a life to my galaxy s i9000.
Vijith Valsan said:
Hi,
tried firmware updation using odin v.1.82..Now i cant find recovery mode.only download mode.while trying flash with Aries_P-SBL.tar phone shows invalid bootloader!!
please give a life to my galaxy s i9000.
Click to expand...
Click to collapse
Download the stock firmware for your device and flash it with Odin. Also use a 512 pit file.