[Q] Help: Galaxy S Advance - Softbrick Recovery - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

Hi, Im new here, Im trying to upgrade my Galaxy S Advance GT-I9070 from 2.3.6 GB to JB using ODIN, I accidentally downloaded the .tar file for Galaxy S2 GT-I9100, upgrade failed, now my phone is soft bricked, Kies cant recognize my phone for recovery, I read some tutorials to unbrick it using ODIN, cant find the right path/file to do it.
heres what I see in after pressing Vol Down/HOME/Power:
ODIN MODE
Product Name: GT-I9070
Custom Binary Download: No
Current Binary: Samsung Official
what files I need to download to restore it back to GB then upgrade to JB? Thanks in advance!
Problem Solved: I downloaded "I9070DXAMD1_I9070OLBAME1_HOME.TAR.md5" and install it, it worked!
Mods Pls close, thanks XDA!

You was lucky, it could be hardbrick. Never flash other phones firmware.

Related

[Q] Galaxy tab SHW-M180l (korean Version) soft Bricked

Hi all I was trying to update my firmware vie Kies and my computer froze up during the load. Now my tab is stuck at Android system recovery with an error message "E:failed to mount /cache (invalid argument)
I tried firmware recovery with kies but it doesn't show any failed attempts and it is asking for a recovery code.
I downloaded the stock firmware from matcl.com and tried to reinstall with Odin. It says success, but I still have the same error on my TAB. I tried wipe data/factory reset and wipe cache partition and try to reinstall but still nothing.
When I wipe data cache partition I get the error "E:forrmat_volume: rfs format failed on /dev/block/stl111"
Any help or suggestions would be greatly appreciated.
Update
I tried to flash HOME_M180L.TF24.1533_CL319576_REV03_user_low_ship.tar with odin and no pit file, same result
I tried to flash tegrak-kernel-build-19-for-M180L-ED25.tar to attempt recovery, now I get failed to mount /system. errno= invalid argument
If I re-flash the HOME_M180L.TF24.1533_CL319576_REV03_user_low_ship.tar I get back to the /cache error
From research I believe that the partitions are all screwed up but I haven't found a way to restore them.
Any help would be appreciated
Does anyone know the right pit file to go with the stock firmware? My firmware was 2.3.4 before it got all screwed up.
I took it to the Samsung service center today, they say the main board needs replaced, can a failed kies update do that?
hello ppl i have
model number: SHW-M180s
firmware version: 2.2
baseband : Unknown
kernel : 2.6.32.9 [email protected]#1
build number : FROYO.EA26
now i cant make phone call please help
I have full stock ROM SHWM180L LG U+ ! Contact me now!
I have pit file
Sent from my SHW-M180L using xda premium
minhkhue90 said:
I have pit file
Sent from my SHW-M180L using xda premium
Click to expand...
Click to collapse
Hi
I have one M180L have same issue
Please can you send me the pit file and if possible a link to the stock firmware
stock and rooted roms for shw-m180s
stock and rooted roms for shw-m180s
if you need any of the files in the pictures i posted just ask
Please upload full firmware with pit file for SHW-M180S
troyanec said:
Please upload full firmware with pit file for SHW-M180S
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1249200
the latest would be SHW-M180S UC27
check to link from above's thread. the link would be in korean but all you need to do is download all zips and join them with 7-zip or ALZip (both available at CNet).
wilksy1 said:
if you need any of the files in the pictures i posted just ask
Click to expand...
Click to collapse
Hello,
I recently got a SHW-M180S and want to flash an ICS rom and root it. I've been searching but can't find really good info.
But I find your post and see some hope. Please, can you send me a link to download the ICS rom for SHW-M180S and some instructions in english on how to flash it?
I don't have root access on the TAB and I also want it.
I will be very glad.
Thanks in advance and best regards.
samsung anycall galaxy tab (shw-m180L)
wilksy1 said:
if you need any of the files in the pictures i posted just ask
Click to expand...
Click to collapse
help please, ihave a broken samsung anycall galaxy tab (shw-m180L) which have been flashed with a wrong files and now whenever i open it, it stucks in the welcome, help idonot know what todo, im a noob here
also i have another samsung anycall galaxy tab (shw-m180L) which is fresh and working, is there a possibility that i could copy the firmware or the files of the fresh samsung anycall galaxy tab (shw-m180L) and flash it in the broken samsung anycall galaxy tab (shw-m180L)?
will it work? and how would i be able to do it?
HElp please :,(

[Q] GT-N7000 Stuck in loop at Samsung splash (boot screen)

I was trying to install a stock ROM using PC Odin as I done many times before after taking it from stock to root using the CF-Root method. I wiped my data and install the stock ROM using PC Odin and got a PASS. It went through the install package screen and reboot. Now, however, I get the Samusng boot screen animation all the way to the glowing SAMSUNG and then it loops endlessly . PLEASE HELP. Was trying to install the Carphone Warhouse 2.3.6 November 2011 (N7000XXKKA_N7000CPWKK3_CPW) ROM. Using an Internation Samsung Galaxy Note GT-N7000.
TXBrnNRaised said:
I was trying to install a stock ROM using PC Odin as I done many times before after taking it from stock to root using the CF-Root method. I wiped my data and install the stock ROM using PC Odin and got a PASS. It went through the install package screen and reboot. Now, however, I get the Samusng boot screen animation all the way to the glowing SAMSUNG and then it loops endlessly . PLEASE HELP. Was trying to install the Carphone Warhouse 2.3.6 November 2011 (N7000XXKKA_N7000CPWKK3_CPW) ROM. Using an Internation Samsung Galaxy Note GT-N7000.
Click to expand...
Click to collapse
Go to recovery and wipe cache and format data and reboot.
I can access Download (Odin) mode. No custom ROM was installed, just stock ROM that I could later root. Reads as follows:
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: YES (1 counts)
CURRENT BINARY: SAMSUNG OFFICIAL
Found Chainfire's post in the SGSII forums about TraingleAway. I just used the param.tar file for PDA in PC Odin and now I can boot again.
FYI I had tried using Q1_20110914_16GB.pit and a stock ROM in PC Odin and the re-partition function with no luck prior to this.
All is well. Thanks to Chainfire a.k.a. one of XDA's greatest members.
Now trying to work around the 'logo_q1.jpg' draw failed issue. Found post here. Hopefully it works.
Resolved. Flash back to a stock ROM using PC Odin.
please help
Okay.. So my phones on bootloop and ahh i dunno what to do..
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD : YES (2 COUNTS)
CURRENT BINARY : CUSTOM
What should i do? im so lost..please..someone..
try flash full wipe firmware
phone+csc+pda
prefarably GB
And let us if that sort u out
It's been a while but I believe I had to use PC Odin and do as ac-milan is suggesting. Find a stock ROM (I thinK I used a Carphone one) and flash phone+csc+pda. Might try the param.tar file under PDA too. Can't remember if I tried it solo or with other files. Trial and error.

[Q] Brick my Tablet 8.9 (Problem Solved)

My Tab already back to normal, Thanks :good:
Dear all, i cut the crap:
I did brick my samsung tablet 8.9"
Before I already had manage to upgrade my tab into ICS base on: http://forum.xda-developers.com/showthread.php?t=1893456 with "
[ROM][ICS][OFFICIAL][P7300] P7300ZSLP7 stock+rooted+voice calls" and upgrade the kernel into 1.8.2 based on A1
But some reason now i can't restart the tablet, I did manage to reinstall the CWM v5.xxx from ODIN because before i accidently installed the CWM with touch screen support (don't ask, my stupid mistake because downloading the CWM for the tab 2 for my father and installed it).
Now, my tab only showing samsung logo, but still capable to go to CWM v5.xx and recovery mode.
I did want to ask, is that possible to install CWM v6.xx based on kallt ( http://forum.xda-developers.com/showpost.php?p=21194554&postcount=2 ) from ODIN? I did tried download the zip but the ODIN only recognized tar files, so i tried two ways: extract and repackaged it (failed) and trying to converse it (also failed).
Anyone can tutor me how to install CWM based on kallt from ODIN? Maybe after that, my proble solve.. Thanx
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Yupp.. ODIN stil recognize the tab..
Ok, will try it first
jd1639 said:
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse

[Q] Help! Phone keeps rebooting and I can't acess recovery

Hi,
My friend is having problems with his GT-I9000 and asked me for help. His phone keeps rebooting showing only the Samsung Galaxy screen when it starts. The screen keep showing for 8 seconds than the phone turn off. Then ir turn again and show the same start screen again.
I tried to acess recovery mode with no sucess, but I was able to acess download mode. So I guess I'll have to use Odin to recovery the phone but I don't know how I should do it. Had used Odin just once ot twice and it was two years ago.
Also I can't find any PDA, CSC and Phone files. He had ICS before it started to reboot and I can' only find .ZIP files for ICS and JB. Does anyone know how to use a Zip file with Odin or have a link to ICS .tar files?
Regards
1. Go back to stock: Flashing To Original Rom - Using Odin on GT-i9000
2. Root your device: Rooting GT-I9000 2.3.3 [India DDJV9]
3. Install ICS: Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
4. Install JB: Installing Jelly Bean 4.1 on Galaxy S GT-I9000
ENJOY

Soft Bricked GT-P6200 made in vietnam

Help please i soft bricked Gt-P6200 tab i dont know what to do and where to find stock rom for my tab please
i found a solution of my own its now working again but thanks anyways
Format ur tab using recovery mode and install slim rom. Or go to samsung service centre pay 500 ₹ and get the tab repared.
Sent from my SM-J500F using XDA Forums
hi , i had got an emmc brick with ics stock recovery , i had use hg42 script with cwm and his patched pit , it's bootup stock jb and succes to install kk custom rom (slim/aosb/omni) but i have got this error in cwm log
Can't partition non mmcblk device /devices/platform/s3c-sdhci.2/mmc_host/mmc1
pls what does it mean or any suggestions !!!, i'm worry about losin much memories with flashing patched pit with odin

Categories

Resources