My Tab already back to normal, Thanks :good:
Dear all, i cut the crap:
I did brick my samsung tablet 8.9"
Before I already had manage to upgrade my tab into ICS base on: http://forum.xda-developers.com/showthread.php?t=1893456 with "
[ROM][ICS][OFFICIAL][P7300] P7300ZSLP7 stock+rooted+voice calls" and upgrade the kernel into 1.8.2 based on A1
But some reason now i can't restart the tablet, I did manage to reinstall the CWM v5.xxx from ODIN because before i accidently installed the CWM with touch screen support (don't ask, my stupid mistake because downloading the CWM for the tab 2 for my father and installed it).
Now, my tab only showing samsung logo, but still capable to go to CWM v5.xx and recovery mode.
I did want to ask, is that possible to install CWM v6.xx based on kallt ( http://forum.xda-developers.com/showpost.php?p=21194554&postcount=2 ) from ODIN? I did tried download the zip but the ODIN only recognized tar files, so i tried two ways: extract and repackaged it (failed) and trying to converse it (also failed).
Anyone can tutor me how to install CWM based on kallt from ODIN? Maybe after that, my proble solve.. Thanx
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Yupp.. ODIN stil recognize the tab..
Ok, will try it first
jd1639 said:
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Related
Hello, I have a Samsung Galaxy Tab 8.9 7310 and it gets stuck at the logo. I can enter into download and recovery, even install the CMW recovery, but it does not get me acess to the internal memory, so i can´t install the previuos rom. Odin recognizes the tablet, buy I have tried a lot of roms (PDA´s) and it always gets stuck in the process, especifically when "writting image system". Any solution? Any rom flasheable with Odin which includes also PIT, Bootloader, CSC and Phone?
Thank you very much for your help guys!
Dani3po said:
Hello, I have a Samsung Galaxy Tab 8.9 7310 and it gets stuck at the logo. I can enter into download and recovery, even install the CMW recovery, but it does not get me acess to the internal memory, so i can´t install the previuos rom. Odin recognizes the tablet, buy I have tried a lot of roms (PDA´s) and it always gets stuck in the process, especifically when "writting image system". Any solution? Any rom flasheable with Odin which includes also PIT, Bootloader, CSC and Phone?
Thank you very much for your help guys!
Click to expand...
Click to collapse
Try this.. Go to download mode and install a custom kernel.. Then try flashing a new ROM by flashing pit file first..
Sent from my fingers to your face using xda premium.!
Or try a full wipe from cwm
Sent from my GT-P7310 using xda app-developers app
It shouldn't matter if you use 32 of 64-bit windows, but when I flashed my Samsung Galaxy from x64 platform it became messed up. Ran it from my netbook with windows7 starter 32 bit, worked like a charm. Maybe it's the computer your flashing from and you should try another.
if u installed a new rom, then wipe data and dalvik... I bootlooped my phone when I didn't do that... try it...
If u have just flashed new rom u should wipe data/cache and reflash if it doesn't work flash via Odin,and should be ok
so i was flowing the guide on cyanogenmod to install the CMW
after i successfully installed it the device booted up and just stayed at the Samsung logo. please help me
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
so i did do that just now but it didnt work i used another process and know my tab goes into CWM and when i wipe data,cache and dalivk then i install the CM9 it boots then i see the logo of cyanogenmod then it boots into CWM with out me holding any buttons
then flash CM9 again once more.
First round converts BML partition to MTD partition
priyana said:
then flash CM9 again once more.
First round converts BML partition to MTD partition
Click to expand...
Click to collapse
sweet it worked thanks!!!!!
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
priyana said:
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
Click to expand...
Click to collapse
already did and thanks for the help
Galaxy tab stuck on samsung logo
Hi,
my p1000 is stuck on the samsung logo screen, Ive tried following all documentation, it says to copy the files to the external sd card, how do i get to external sd card if the tab wont boot up and windows cant see the device???
sorry to be a pain
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
hi my galaxy tab was on ics and i tried to flash back original gingerbread rom, i flashed through odin which everything passed, it then boots up with recovery does what it does, powers back on but its stuck on samsung logo, it was purchased from carphone warehouse, does anyone know wha i did wrong
Were you using overcome gb stock safe v5?
And make sure you use the Odin of correct version, like the one in the package.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hey Priyana, I got the same problem.
I can boot to download mod but cant boot recovery mod, and my device is also not recognized when connected to PC
Any suggestion?
Usually just have to keep trying for Odin to detect the device.
Failing that you need a fresh pc.
Sent from my GT-I9300 using xda app-developers app
debrick galaxy tab
see my thread > http://forum.xda-developers.com/showthread.php?p=34872552#post34872552
Hi, please keep all question/help related threads in the Q&A section only please. Thank You.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
i have the same problem stuck on samsung logo after installing cwm , i tried to use the overcome through odin but in download mode it doesnt recognise my phone only when i put it in recovery mode(power button and volume UP button pressed) it recognise it but when i press start( after i have put the firmware the pit file etc. and then conecting my tab) odin stacks at set up connection ... im really confused if anyopne can help i would really apreciate it.
ps. i have a sim card on and an sd tried to remove sd but made no difference
ty in advance
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
theanks a lot but im not an advance usere can you tell me how can i do that i mean i remove the driver on my pc( in de vice manager is recognised as gadget serial) and after were can i find gb-stock-safe-v5
thankls again again for spending time to answear my problem
also in what state should my device be when to plug it etc ty again
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
priyana said:
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
Click to expand...
Click to collapse
thak you very much for the quick response i will post results
Hello,,
I have some problems getting my device to work.
I have a samsung galaxy s advance (i9070) with no OS installed on it.
I accidently wiped everything on it except for the recovery,
TWRP v2.2.1
When I try to install a .zip file using the install button I get a red failed sign and an error that says 'This package is for' and then my device.
Would anybody be so kind to help me fix this, I got no clue.
With kind regards,
Seriouslyy
Flash stock firmware through odin
Sent from my GT-I9070 using XDA Premium 4 mobile app
Are you using GB ? If you I suggest you go to download mode (vol down + menu + power) and install jelly bean firmware with Odin 3.
If not (or if you want to use GB) use Odin 1.85 an flash a gingerbread firmware.
You can find guide topics in forum.
Hi Team XDA,
Few Days Back I have Rooted my Samsung Galaxy GT-N7000. I went to Philz's Custom Recovery and upgraded it to 6.07.9.
Process went on Successfully. But when I Re Booted my phone. I could only see "SAMSUNG GALAXY GT-N7000" Logo followed with Blank/Black screen.
Did I install a Custom recovery which Do not support my phone? Coz I saw last 4 letters of my Kernel name and then downloaded it.
Did my phone went to BootLoop? or i Bricked it.
Please Suggest.
NikhilDj26 said:
Hi Team XDA,
Few Days Back I have Rooted my Samsung Galaxy GT-N7000. I went to Philz's Custom Recovery and upgraded it to 6.07.9.
Process went on Successfully. But when I Re Booted my phone. I could only see "SAMSUNG GALAXY GT-N7000" Logo followed with Blank/Black screen.
Did I install a Custom recovery which Do not support my phone? Coz I saw last 4 letters of my Kernel name and then downloaded it.
Did my phone went to BootLoop? or i Bricked it.
Please Suggest.
Click to expand...
Click to collapse
U need to flash Phiz version 5, using recovery or odin.
Sent from my GT-N7000 using Tapatalk 2
Thankyou for ur guidence.
forest1971 said:
U need to flash Phiz version 5, using recovery or odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thankyou
NikhilDj26 said:
Thankyou
Click to expand...
Click to collapse
i suck on samsung logo too.how to flash philz with odin
simke MD said:
i suck on samsung logo too.how to flash philz with odin
Click to expand...
Click to collapse
1. Start your phone in 'Download' Mode.
2. Download ODIN and run it on u'r PC
3. Connect your phone to PC with USB. (you should see port and Color change on ODIN application.
4. AutoBoot and Reset time checkbox should be check.
5. Set PDA path to the Philz recovery file on your PC.
6. Click on Start.
i do just like you say,but i have FAIL message on odin.
Some other step to do ???
i go with older 5.15 philz touch and i get pass on odin,but still dont have boot.just jellow triangle and samsung logo
simke MD said:
i do just like you say,but i have FAIL message on odin.
Some other step to do ???
i go with older 5.15 philz touch and i get pass on odin,but still dont have boot.just jellow triangle and samsung logo
Click to expand...
Click to collapse
What rom were you on?
I have been on cheese rom.
Try to update super user on not "normal" second option which i can choose.
Then stuck on samsung logo.
Solution for me :
Philz touch 5.15 with odin
And install stock german rom
I just lost phone root
Sent from my GT-N7000 using XDA Premium 4 mobile app
Hi I'm using samsung galaxy ace s5830, custom rom sgs2, Problem starts when I thought to upgrade my kernel version so iv'e download it and install it with CWM 6.0. Installation completed and then I reboot my phone. Then my phone just not responding and there is no display, unable to go in CWM neither Download mod. Connected my phone to Pc and starts odin. First Odin can recognize but when I reconnect it, Even odin didn't recognize!! Please help me
You hard break your ace dude
The only way is to change the HARDWARE
sent from my AOKP jelly bean using xda premium app
Hello.
Try to instal stock Rom via Odin.
Try to connect your phone to PC via Odin a few times, meybe one of them will be a possitive.
Good luck.