GT-p1000 stuck at samsung logo - Galaxy Tab Q&A, Help & Troubleshooting

so i was flowing the guide on cyanogenmod to install the CMW
after i successfully installed it the device booted up and just stayed at the Samsung logo. please help me

Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
so i did do that just now but it didnt work i used another process and know my tab goes into CWM and when i wipe data,cache and dalivk then i install the CM9 it boots then i see the logo of cyanogenmod then it boots into CWM with out me holding any buttons

then flash CM9 again once more.
First round converts BML partition to MTD partition

priyana said:
then flash CM9 again once more.
First round converts BML partition to MTD partition
Click to expand...
Click to collapse
sweet it worked thanks!!!!!

it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics

priyana said:
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
Click to expand...
Click to collapse
already did and thanks for the help

Galaxy tab stuck on samsung logo
Hi,
my p1000 is stuck on the samsung logo screen, Ive tried following all documentation, it says to copy the files to the external sd card, how do i get to external sd card if the tab wont boot up and windows cant see the device???
sorry to be a pain

Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app

hi my galaxy tab was on ics and i tried to flash back original gingerbread rom, i flashed through odin which everything passed, it then boots up with recovery does what it does, powers back on but its stuck on samsung logo, it was purchased from carphone warehouse, does anyone know wha i did wrong

Were you using overcome gb stock safe v5?
And make sure you use the Odin of correct version, like the one in the package.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hey Priyana, I got the same problem.
I can boot to download mod but cant boot recovery mod, and my device is also not recognized when connected to PC
Any suggestion?

Usually just have to keep trying for Odin to detect the device.
Failing that you need a fresh pc.
Sent from my GT-I9300 using xda app-developers app

debrick galaxy tab
see my thread > http://forum.xda-developers.com/showthread.php?p=34872552#post34872552

Hi, please keep all question/help related threads in the Q&A section only please. Thank You.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.

i have the same problem stuck on samsung logo after installing cwm , i tried to use the overcome through odin but in download mode it doesnt recognise my phone only when i put it in recovery mode(power button and volume UP button pressed) it recognise it but when i press start( after i have put the firmware the pit file etc. and then conecting my tab) odin stacks at set up connection ... im really confused if anyopne can help i would really apreciate it.
ps. i have a sim card on and an sd tried to remove sd but made no difference
ty in advance

Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
theanks a lot but im not an advance usere can you tell me how can i do that i mean i remove the driver on my pc( in de vice manager is recognised as gadget serial) and after were can i find gb-stock-safe-v5
thankls again again for spending time to answear my problem
also in what state should my device be when to plug it etc ty again

follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5

priyana said:
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
Click to expand...
Click to collapse
thak you very much for the quick response i will post results

Related

FAILED Odin at stuck at bootscreen

i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
aibo said:
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
but the odin shows FAILED instead of PASS. is there any hope that it can boot?
Weird, odin failed at which point ? If it failed then you can't be stuck at boot screen if I remember correctly.
Sent from my GT-P1000 using XDA App
z4520ft said:
i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Click to expand...
Click to collapse
Is your tab still able to go to download mode?
If yes. Try flashing 2.3.3 from this forum and follow chainfire instructions. Don't download ROM from samfirmware. Just browse the Dev section and you will find everything you need to flash 2.3.3.
Good luck
Go here http://forum.xda-developers.com/showthread.php?t=1073854
SGT Running Overcome 2.0.0 RC1
My tab did the same thing, download the rom from overcome thread, put your tab in download mode and reflash
Sent from my GT-P1000 using XDA Premium App
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
z4520ft said:
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just follow the instructions in the link i provided in the previous post and you'll be fine. Please do not skip steps.
SGT Running Overcome 2.0.0 RC1

[Q] HELP! Deleted/formatted EVERYTHING using CWM

To some this might sound stupid but I kind of 'Intentionally' deleted absolutely EVERHTING from my phone with CWM. I am really a noob at this stuff, i've been looking for threads explaining a fix (if there is one) but I haven't found anything. In case you're wondering, I deleted everything because I tried to flash a new rom and it just stayed with the one I was using previously, please help me out here.
When I turn on my Captivate it just stays on the AT&T boot screen.
ALSO: I can't go into CWM recovery, what can I do? Please help!
Simply flash an appropriate kernel through Heimdall/Odin. It's no big deal.
Sent from my SGH-I897 using XDA
korockinout13 said:
Simply flash an appropriate kernel through Heimdall/Odin. It's no big deal.
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
Ok, how do I know what the appropriate kernel is and how do I flash it?
As I said, I'm a noob at this stuff
EDIT: Ok so i've found a kernel and flashed it. The phone boots up but stays at a "Galaxy S SGH-i897" screen and it says samsung on the bottom, but that's it. I've tried flashing one of those one click odin from this thread here http://forum.xda-developers.com/showthread.php?t=1300843 but it stays at "setup connection" please help me out here, haha.
^
See the "Connection Issues..." stickied thread in the captivate general forum.
Sent from my SAMSUNG-SGH-I897 using xda premium
I mean an appropriate kernel depending on your current ROM, i.e. if you're on Gingerbread, flash corn, if ICS, flash semaphore.
And yeah the phone isn't going to boot past there because you wiped /system probably. Either flash a ROM through CWM or Odin.
Sent from my SGH-I897 using XDA
Well thanks guys! I finally got it working. I ended up flashing a stock GB rom that i got from that thread. Since Odin didnt work ( ) i used Heimdall to flash gb 2.3.4
Thanks for the help!

[Q] Don't Know What Happened to My Note ? Plz Help :)

Hi Guyz...
I was on Android 4.0.4 Stock Indian Rom & stock kernel
I found this thread
http://forum.xda-developers.com/showthread.php?t=1953847
and i went to it.. than i downloaded that rom..
now it was time to install it..
I went to recovery mode than i selected CWM.zip and flashed it..
than in CWM I wiped Data
but i think data was not wiped ! phone automatically turned on... and was hanged on Samsung logo.. i thought it has been done
now i went to apply zip from sd card.. i applied the zip provided by eybee1970
Done.. it installed.. now it was showing Samsung's New Logo on startup..
i was happy coz i thought now m on JB !
than I waited 10 minutes but phone was hanged on samsung's logo
i thought maybe it is installation problem..
I again went to recovery mode.. now my recovery mode was changed ! i was directly into CWMR
and i seen kernel also changed ! it was Philz's Kernel...
I thought now its perfect for my Note.. Now i can install JB
i again flashed that Zip file..
But again phone was hanged on Samsung Logo !
i waited 30 minutes...
than i again went to recovery mode and I wiped Data again..
than again i Flashed that zip file
Now phone was Showing -
Galaxy Note GTN7000 Only
again i flashed zip for 4th time.. now i thought it may be a problem of that zip ! it may never install...
Now i changed my mood and connected my note with pc and opened odin and tried to install - N7000DDLR6_N7000ODDLR2_N7000DDLR1
but it was also not getting installed ! Odin gaved error - Fail !
i tried it 2 times.. now nothing is happening...
My Note Not opening
now it is showing error -
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again..
What Can I Do Now ? Please Help Friends
and sorry coz i do not read the whole post and do a direct installations do not prepare and care for instructions..
plz help guyz plz
First off all always read related thread carefully before trying new rom on your Note. There are lots of warning in this forum not to use recovery mode when you are on stock ICS rom.
Anyway try to install stock gingerbread rom on your note using pc odin. It is better to use Dr. Ketan`s step by step guide to root your note and installing new rom. I hope you are able to go to download mode. BEST OF LUCK
Sent from my GT-N7000 using xda app-developers app
sjshubham said:
and sorry coz i do not read the whole post and do a direct installations do not prepare and care for instructions..
Click to expand...
Click to collapse
So trying to help you might be useless
I can't believe you wiped from stock ics kernel.. Check out this thread
http://forum.xda-developers.com/showthread.php?t=1667886
All the best.
Sent from my GT-N7000 using xda app-developers app
If you are able to go to download mode then there is a chance to bring back your note in working condition. I will be happy if I can help +918882596433
Sent from my GT-N7000 using xda app-developers app
leecooper said:
First off all always read related thread carefully before trying new rom on your Note. There are lots of warning in this forum not to use recovery mode when you are on stock ICS rom.
Anyway try to install stock gingerbread rom on your note using pc odin. It is better to use Dr. Ketan`s step by step guide to root your note and installing new rom. I hope you are able to go to download mode. BEST OF LUCK
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
hmmm.. unable to do it
odin is not installing it
sjshubham said:
hmmm.. unable to do it
odin is not installing it
Click to expand...
Click to collapse
I guess u bricked ur note..if odin fails, then try claiming warranty from Samsung, if your phone is under warranty..
If not, try jig, JTAG, PIT file methods..*after reading & understanding completely & thoroughly*
I've been there buddy....
1. Download a safe kernel *.tar for flashing from pc odin
- after install u'll be able to get into recovery
2. Get an original firmware from www.sammobile.com
-u r gonna flash it from pc odin along with the PIT file.
-- boot into download mode
-- flash firmware
-- finish... now can continue flash new kernel and ROM
Refer to dr.Ketan's flashing / brick guide
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
I've been there buddy....
1. Download a safe kernel *.tar for flashing from pc odin
- after install u'll be able to get into recovery
2. Get an original firmware from www.sammobile.com
-u r gonna flash it from pc odin along with the PIT file.
-- boot into download mode
-- flash firmware
-- finish... now can continue flash new kernel and ROM
Refer to dr.Ketan's flashing / brick guide
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
may be he mentioned that he's not able to get into download mode
Thanks guyz for your replies.. I tried allot and finally sent my note to samsung care.. They gaved it back to me now... And told that they have updated it.. And now phone is working but another problem is now i cant use wifi anymore dont know what is this? and also phone is getting hanged sometimes while opening any app...
Sent from my GT-N7000 using xda app-developers app
sjshubham said:
Thanks guyz for your replies.. I tried allot and finally sent my note to samsung care.. They gaved it back to me now... And told that they have updated it.. And now phone is working but another problem is now i cant use wifi anymore dont know what is this? and also phone is getting hanged sometimes while opening any app...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Try flashing another tom
And if you are not sure about flashing a rom,its better to take it again to service center
was it proper Samsung service center?
what did they say? did they change the motherboard?
check if your usb storage is 11gb, if yes, then flash a safe kernel and do a factory reset and test again
nokiamodeln91 said:
was it proper Samsung service center?
what did they say? did they change the motherboard?
check if your usb storage is 11gb, if yes, then flash a safe kernel and do a factory reset and test again
Click to expand...
Click to collapse
They just told os was missing so we updated it...
Sent from my GT-N7000 using xda app-developers app
be in a safe kernel and do a factory reset
Sent from my GT-N7000 using xda premium
Woah so many people wiping on stock ics and using cwm.zip... Widely known as dangerous... Guess all of you went straight to YouTube instead of coming here and read how to do stuff.. Ends up by learning the hard way and the expensive way
Tapatalking on my n7000

[Q] Brick my Tablet 8.9 (Problem Solved)

My Tab already back to normal, Thanks :good:
Dear all, i cut the crap:
I did brick my samsung tablet 8.9"
Before I already had manage to upgrade my tab into ICS base on: http://forum.xda-developers.com/showthread.php?t=1893456 with "
[ROM][ICS][OFFICIAL][P7300] P7300ZSLP7 stock+rooted+voice calls" and upgrade the kernel into 1.8.2 based on A1
But some reason now i can't restart the tablet, I did manage to reinstall the CWM v5.xxx from ODIN because before i accidently installed the CWM with touch screen support (don't ask, my stupid mistake because downloading the CWM for the tab 2 for my father and installed it).
Now, my tab only showing samsung logo, but still capable to go to CWM v5.xx and recovery mode.
I did want to ask, is that possible to install CWM v6.xx based on kallt ( http://forum.xda-developers.com/showpost.php?p=21194554&postcount=2 ) from ODIN? I did tried download the zip but the ODIN only recognized tar files, so i tried two ways: extract and repackaged it (failed) and trying to converse it (also failed).
Anyone can tutor me how to install CWM based on kallt from ODIN? Maybe after that, my proble solve.. Thanx
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Yupp.. ODIN stil recognize the tab..
Ok, will try it first
jd1639 said:
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse

Problem with dbdata

Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2

Categories

Resources