FAILED Odin at stuck at bootscreen - Galaxy Tab Q&A, Help & Troubleshooting

i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.

Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App

aibo said:
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
but the odin shows FAILED instead of PASS. is there any hope that it can boot?

Weird, odin failed at which point ? If it failed then you can't be stuck at boot screen if I remember correctly.
Sent from my GT-P1000 using XDA App

z4520ft said:
i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Click to expand...
Click to collapse
Is your tab still able to go to download mode?
If yes. Try flashing 2.3.3 from this forum and follow chainfire instructions. Don't download ROM from samfirmware. Just browse the Dev section and you will find everything you need to flash 2.3.3.
Good luck
Go here http://forum.xda-developers.com/showthread.php?t=1073854
SGT Running Overcome 2.0.0 RC1

My tab did the same thing, download the rom from overcome thread, put your tab in download mode and reflash
Sent from my GT-P1000 using XDA Premium App

Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App

z4520ft said:
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just follow the instructions in the link i provided in the previous post and you'll be fine. Please do not skip steps.
SGT Running Overcome 2.0.0 RC1

Related

[Q] Boot loops at random on power on, downgrade doesn't fix

Hello everyone,
I've got an Australian vodafone GT-i9000 which i bought that was having issues boot looping on power on. Sometimes it can boot loop for 20 seconds (looping at the Samsung screen, not the S screen) while others it can boot loop for 20 minutes before powering on.
I've tried flashing with ODIN using the 512 pit to numerous stock versions, most recently this : GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl (stock vodafone AU rom). The flash goes fine, however if I select format with the 512 PIT I can get the following message after the reboot:
E:format_volume: rfs format failed on /dev/block/mmcblkop2
Even if this message doesn't come up on flash, The phone keeps boot looping. Once started, the phone seems to work fine detecting internal & SD memory. I want a more permanent fix however, because if I was planning on giving it to a friend and 'leaving the phone boot looping until it starts' is probably too hard for them to understand. Also I'm not sure if there's an issue with the internalSD which is causing the problem, and if it is, it could cause further issues on more harder use.
Anyone had this sort of issue? The phone was flashed with ICS when the guy sent it to me, he said the bootloops started after he upgraded to ICS. I've got a 32gb SD- tried removing before flash and having it in while flash with no success (have seen a guide for installing on external SD for the i9000m- however it looks like you can only do this if the media device has completely failed). It seems to boot every time using a bootloader kernal (cant remember the name, ICE something from memory) into the recovery software- so maybe a busted sector on the internal SD?
Ideas anyone?
Cheers,
Dylan
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
Maybe try going into cwm wipe internal same card memory, remove external as card, put into download mode and flash with Odin using pit and repetition checked, if you get the devblock error flash this is PDA without repetition checked and without pit http://forum.xda-developers.com/showthread.php?t=984140
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Thanks for the tip man, will give it a go now
dillzy1986 said:
Thanks for the tip man, will give it a go now
Click to expand...
Click to collapse
After second reboot after following your steps the boot looping started again. Any more ideas matey?
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
calum96 said:
Is there any error when flashing in Odin or after and it opens the does on the the phone? Applying csc ect? If so what do the errors say?
Sent from my GT-I9000 running remICS-UX using XDA premium
Click to expand...
Click to collapse
Theres an error message about the CSC but it flicks up so quick i cant see it. It's not in red however- its just in yellow text. I'll see if i can get an error message outta it.
Hmm try flashing the cf root kernel with Odin after the install, don't tick repetition
Sent from my GT-I9000 running remICS-UX using XDA premium
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
saphirrot said:
1. Flash Stock Rom WITH BOOTLOADER !!!
2. Problem should be solved :/
OR
Get a stock rom from KIES !
after that you can apply your custom rom...
Click to expand...
Click to collapse
Bit of a problem with that matey, Kies says the phone does not support firmware updates through KEIS and the rom i've been flashing with KEIS is the full standard rom from Vodafone- includes CSC, PDA and phone files. from memory the PDA file contains the standard bootloader yeah?
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Did you get a look at the error? Or try flashing the cf root kernel?
Sent from my GT-I9000 running remICS-UX using XDA premium
saphirrot said:
Look at this
Take a Firmware with the red SBL ending, thats with bootloader, flash it in download mode via odin and the problem should and must be solved through this !!
btw: i recommend to flash a JW5 version.. please tell us if this worked !
Click to expand...
Click to collapse
GT_I9000_XWJVP_XXJVQ_VAUJV6_Sbl is the firmware i'm using, so no good with the boot loader
I'll try a JW5 version as suggested .
Also to the guy above, no luck with getting the error message, i'll give it another flash now and see how it goes.
Cheers guys really appreciate it

GT-p1000 stuck at samsung logo

so i was flowing the guide on cyanogenmod to install the CMW
after i successfully installed it the device booted up and just stayed at the Samsung logo. please help me
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
so i did do that just now but it didnt work i used another process and know my tab goes into CWM and when i wipe data,cache and dalivk then i install the CM9 it boots then i see the logo of cyanogenmod then it boots into CWM with out me holding any buttons
then flash CM9 again once more.
First round converts BML partition to MTD partition
priyana said:
then flash CM9 again once more.
First round converts BML partition to MTD partition
Click to expand...
Click to collapse
sweet it worked thanks!!!!!
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
priyana said:
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
Click to expand...
Click to collapse
already did and thanks for the help
Galaxy tab stuck on samsung logo
Hi,
my p1000 is stuck on the samsung logo screen, Ive tried following all documentation, it says to copy the files to the external sd card, how do i get to external sd card if the tab wont boot up and windows cant see the device???
sorry to be a pain
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
hi my galaxy tab was on ics and i tried to flash back original gingerbread rom, i flashed through odin which everything passed, it then boots up with recovery does what it does, powers back on but its stuck on samsung logo, it was purchased from carphone warehouse, does anyone know wha i did wrong
Were you using overcome gb stock safe v5?
And make sure you use the Odin of correct version, like the one in the package.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hey Priyana, I got the same problem.
I can boot to download mod but cant boot recovery mod, and my device is also not recognized when connected to PC
Any suggestion?
Usually just have to keep trying for Odin to detect the device.
Failing that you need a fresh pc.
Sent from my GT-I9300 using xda app-developers app
debrick galaxy tab
see my thread > http://forum.xda-developers.com/showthread.php?p=34872552#post34872552
Hi, please keep all question/help related threads in the Q&A section only please. Thank You.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
i have the same problem stuck on samsung logo after installing cwm , i tried to use the overcome through odin but in download mode it doesnt recognise my phone only when i put it in recovery mode(power button and volume UP button pressed) it recognise it but when i press start( after i have put the firmware the pit file etc. and then conecting my tab) odin stacks at set up connection ... im really confused if anyopne can help i would really apreciate it.
ps. i have a sim card on and an sd tried to remove sd but made no difference
ty in advance
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
theanks a lot but im not an advance usere can you tell me how can i do that i mean i remove the driver on my pc( in de vice manager is recognised as gadget serial) and after were can i find gb-stock-safe-v5
thankls again again for spending time to answear my problem
also in what state should my device be when to plug it etc ty again
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
priyana said:
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
Click to expand...
Click to collapse
thak you very much for the quick response i will post results

[Q] Don't Know What Happened to My Note ? Plz Help :)

Hi Guyz...
I was on Android 4.0.4 Stock Indian Rom & stock kernel
I found this thread
http://forum.xda-developers.com/showthread.php?t=1953847
and i went to it.. than i downloaded that rom..
now it was time to install it..
I went to recovery mode than i selected CWM.zip and flashed it..
than in CWM I wiped Data
but i think data was not wiped ! phone automatically turned on... and was hanged on Samsung logo.. i thought it has been done
now i went to apply zip from sd card.. i applied the zip provided by eybee1970
Done.. it installed.. now it was showing Samsung's New Logo on startup..
i was happy coz i thought now m on JB !
than I waited 10 minutes but phone was hanged on samsung's logo
i thought maybe it is installation problem..
I again went to recovery mode.. now my recovery mode was changed ! i was directly into CWMR
and i seen kernel also changed ! it was Philz's Kernel...
I thought now its perfect for my Note.. Now i can install JB
i again flashed that Zip file..
But again phone was hanged on Samsung Logo !
i waited 30 minutes...
than i again went to recovery mode and I wiped Data again..
than again i Flashed that zip file
Now phone was Showing -
Galaxy Note GTN7000 Only
again i flashed zip for 4th time.. now i thought it may be a problem of that zip ! it may never install...
Now i changed my mood and connected my note with pc and opened odin and tried to install - N7000DDLR6_N7000ODDLR2_N7000DDLR1
but it was also not getting installed ! Odin gaved error - Fail !
i tried it 2 times.. now nothing is happening...
My Note Not opening
now it is showing error -
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again..
What Can I Do Now ? Please Help Friends
and sorry coz i do not read the whole post and do a direct installations do not prepare and care for instructions..
plz help guyz plz
First off all always read related thread carefully before trying new rom on your Note. There are lots of warning in this forum not to use recovery mode when you are on stock ICS rom.
Anyway try to install stock gingerbread rom on your note using pc odin. It is better to use Dr. Ketan`s step by step guide to root your note and installing new rom. I hope you are able to go to download mode. BEST OF LUCK
Sent from my GT-N7000 using xda app-developers app
sjshubham said:
and sorry coz i do not read the whole post and do a direct installations do not prepare and care for instructions..
Click to expand...
Click to collapse
So trying to help you might be useless
I can't believe you wiped from stock ics kernel.. Check out this thread
http://forum.xda-developers.com/showthread.php?t=1667886
All the best.
Sent from my GT-N7000 using xda app-developers app
If you are able to go to download mode then there is a chance to bring back your note in working condition. I will be happy if I can help +918882596433
Sent from my GT-N7000 using xda app-developers app
leecooper said:
First off all always read related thread carefully before trying new rom on your Note. There are lots of warning in this forum not to use recovery mode when you are on stock ICS rom.
Anyway try to install stock gingerbread rom on your note using pc odin. It is better to use Dr. Ketan`s step by step guide to root your note and installing new rom. I hope you are able to go to download mode. BEST OF LUCK
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
hmmm.. unable to do it
odin is not installing it
sjshubham said:
hmmm.. unable to do it
odin is not installing it
Click to expand...
Click to collapse
I guess u bricked ur note..if odin fails, then try claiming warranty from Samsung, if your phone is under warranty..
If not, try jig, JTAG, PIT file methods..*after reading & understanding completely & thoroughly*
I've been there buddy....
1. Download a safe kernel *.tar for flashing from pc odin
- after install u'll be able to get into recovery
2. Get an original firmware from www.sammobile.com
-u r gonna flash it from pc odin along with the PIT file.
-- boot into download mode
-- flash firmware
-- finish... now can continue flash new kernel and ROM
Refer to dr.Ketan's flashing / brick guide
Sent from my GT-N7000 using xda app-developers app
fr3ker said:
I've been there buddy....
1. Download a safe kernel *.tar for flashing from pc odin
- after install u'll be able to get into recovery
2. Get an original firmware from www.sammobile.com
-u r gonna flash it from pc odin along with the PIT file.
-- boot into download mode
-- flash firmware
-- finish... now can continue flash new kernel and ROM
Refer to dr.Ketan's flashing / brick guide
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
may be he mentioned that he's not able to get into download mode
Thanks guyz for your replies.. I tried allot and finally sent my note to samsung care.. They gaved it back to me now... And told that they have updated it.. And now phone is working but another problem is now i cant use wifi anymore dont know what is this? and also phone is getting hanged sometimes while opening any app...
Sent from my GT-N7000 using xda app-developers app
sjshubham said:
Thanks guyz for your replies.. I tried allot and finally sent my note to samsung care.. They gaved it back to me now... And told that they have updated it.. And now phone is working but another problem is now i cant use wifi anymore dont know what is this? and also phone is getting hanged sometimes while opening any app...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Try flashing another tom
And if you are not sure about flashing a rom,its better to take it again to service center
was it proper Samsung service center?
what did they say? did they change the motherboard?
check if your usb storage is 11gb, if yes, then flash a safe kernel and do a factory reset and test again
nokiamodeln91 said:
was it proper Samsung service center?
what did they say? did they change the motherboard?
check if your usb storage is 11gb, if yes, then flash a safe kernel and do a factory reset and test again
Click to expand...
Click to collapse
They just told os was missing so we updated it...
Sent from my GT-N7000 using xda app-developers app
be in a safe kernel and do a factory reset
Sent from my GT-N7000 using xda premium
Woah so many people wiping on stock ics and using cwm.zip... Widely known as dangerous... Guess all of you went straight to YouTube instead of coming here and read how to do stuff.. Ends up by learning the hard way and the expensive way
Tapatalking on my n7000

[Q] Brick my Tablet 8.9 (Problem Solved)

My Tab already back to normal, Thanks :good:
Dear all, i cut the crap:
I did brick my samsung tablet 8.9"
Before I already had manage to upgrade my tab into ICS base on: http://forum.xda-developers.com/showthread.php?t=1893456 with "
[ROM][ICS][OFFICIAL][P7300] P7300ZSLP7 stock+rooted+voice calls" and upgrade the kernel into 1.8.2 based on A1
But some reason now i can't restart the tablet, I did manage to reinstall the CWM v5.xxx from ODIN because before i accidently installed the CWM with touch screen support (don't ask, my stupid mistake because downloading the CWM for the tab 2 for my father and installed it).
Now, my tab only showing samsung logo, but still capable to go to CWM v5.xx and recovery mode.
I did want to ask, is that possible to install CWM v6.xx based on kallt ( http://forum.xda-developers.com/showpost.php?p=21194554&postcount=2 ) from ODIN? I did tried download the zip but the ODIN only recognized tar files, so i tried two ways: extract and repackaged it (failed) and trying to converse it (also failed).
Anyone can tutor me how to install CWM based on kallt from ODIN? Maybe after that, my proble solve.. Thanx
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Yupp.. ODIN stil recognize the tab..
Ok, will try it first
jd1639 said:
You're not hard bricked, if you were you couldn't get the logo. I'm assuming you can get into down load mode and Odin recognizes the tab. Flash the stock Rom with Odin. You can find the Rom at sammobile.com
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse

[Q] Samsung Galaxy tab GT-p1000 jelly bean

Hi!
I try to get upgrade my tab to Android Jelly Bean, but I find this a bit difficult.
I rooted my device with SuperOneClick and it worked, but when I try to instal the ROM I get this message: signature verification failed.
Have been searching around the internet, but I'm not very good at this.
Basically I need someone to explain what to do in a simple matter :fingers-crossed:
Would appreciate if you could help me!
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
@@
priyana said:
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
Click to expand...
Click to collapse
Is it possible to upgrade from 2.3.7 to 4.0.4 ? Mine use Galaxy Tab P1000
Yes, even to 4.1.2 or 4.2.2
The procedure is exactly the same as I quoted above.
Sent from my GT-P1000 using xda app-developers app
help needed
priyana said:
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
Click to expand...
Click to collapse
hi,
i bricked my galaxy tab p100 few days ago but some how i followed instructions here and there and unbricked using odin. everything seems to work fine but i cannot sign in to gmail and any other google apps. my tab doesnt connect through mobile network too. wifi works.
can u suggest me on how to overcome this issue?
thanks in advance
Which rom? If aosp based, have you flash gapps?
Mobile network, what us your IMEI? 35xxxx ( good) or 0049xxx ( bad).
Sent from my GT-I9300 using xda app-developers app
prazhantkarki said:
hi,
i bricked my galaxy tab p100 few days ago but some how i followed instructions here and there and unbricked using odin. everything seems to work fine but i cannot sign in to gmail and any other google apps. my tab doesnt connect through mobile network too. wifi works.
can u suggest me on how to overcome this issue?
thanks in advance
Click to expand...
Click to collapse
Regarding the mobile networks, do you get signal at all? Check that your APN settings are entered correctly & you're using the right modem.
As mentioned, be sure you're on the right gapps for your build if you're using an aosp rom.
priyana said:
Yes, even to 4.1.2 or 4.2.2
The procedure is exactly the same as I quoted above.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Recently i'm reflash to GB stock which is the version "Android 2.3.6 Gingerbread [XWJQ8]". But after that,I did a factory reset.
Than I flashed the original Gingerbread ROM. Odin didn't give me any error message, but after the tab rebooted I got stucked in a "recovery screen" with the following message in red:
E: Failed to mount /data (invalid argument)
E: install-application-for-customer: Can't mount /data
your storage not prepared yet. please use UI menu for format and reboot actions.
There was an option for format in this recovery screen, but I was unable to select it. The volume up/down keys worked to navigate in the options, but the power button didn't make the selection.
I force the tab to shut down keep pressing the power button. Started it again and the same screen showed up.
Could you help me, which part i was fail because of this?
Try the home button as OK button in stock recovery.
Edit:
BTW, which ROM did you come from? If you were from anything that is AOSP, likely you have MTD partition.
You need a full restock with pit file and "repartition" checked in Odin to get back to BML partition that stock ROM requires.
If your ROM file doesn't have it, you better use Overcome method and its GB-stock-safe-v5 that has it.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Try the home button as OK button in stock recovery.
Edit:
BTW, which ROM did you come from? If you were from anything that is AOSP, likely you have MTD partition.
You need a full restock with pit file and "repartition" checked in Odin to get back to BML partition that stock ROM requires.
If your ROM file doesn't have it, you better use Overcome method and its GB-stock-safe-v5 that has it.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Those ROM come from youtube, i don't know much about nametag for AOSP, AOKP etc, and what is MTD and BML for each partition? ...

Categories

Resources