Hi!
I try to get upgrade my tab to Android Jelly Bean, but I find this a bit difficult.
I rooted my device with SuperOneClick and it worked, but when I try to instal the ROM I get this message: signature verification failed.
Have been searching around the internet, but I'm not very good at this.
Basically I need someone to explain what to do in a simple matter :fingers-crossed:
Would appreciate if you could help me!
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
@@
priyana said:
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
Click to expand...
Click to collapse
Is it possible to upgrade from 2.3.7 to 4.0.4 ? Mine use Galaxy Tab P1000
Yes, even to 4.1.2 or 4.2.2
The procedure is exactly the same as I quoted above.
Sent from my GT-P1000 using xda app-developers app
help needed
priyana said:
you can't flash custom ROM using stock recovery. that is for Samsung signed updates only.
Follow my signature for overcome method.
Please note this: don't need to follow all the way to flash Overcome ROM.
You only want to get to a baseline stock rom (GB-stock-safe-v5).
The you flash overcome kernel, which gives you CWM recovery.
With that, you flash the jelly bean according to the custom ROM instruction.
Click to expand...
Click to collapse
hi,
i bricked my galaxy tab p100 few days ago but some how i followed instructions here and there and unbricked using odin. everything seems to work fine but i cannot sign in to gmail and any other google apps. my tab doesnt connect through mobile network too. wifi works.
can u suggest me on how to overcome this issue?
thanks in advance
Which rom? If aosp based, have you flash gapps?
Mobile network, what us your IMEI? 35xxxx ( good) or 0049xxx ( bad).
Sent from my GT-I9300 using xda app-developers app
prazhantkarki said:
hi,
i bricked my galaxy tab p100 few days ago but some how i followed instructions here and there and unbricked using odin. everything seems to work fine but i cannot sign in to gmail and any other google apps. my tab doesnt connect through mobile network too. wifi works.
can u suggest me on how to overcome this issue?
thanks in advance
Click to expand...
Click to collapse
Regarding the mobile networks, do you get signal at all? Check that your APN settings are entered correctly & you're using the right modem.
As mentioned, be sure you're on the right gapps for your build if you're using an aosp rom.
priyana said:
Yes, even to 4.1.2 or 4.2.2
The procedure is exactly the same as I quoted above.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Recently i'm reflash to GB stock which is the version "Android 2.3.6 Gingerbread [XWJQ8]". But after that,I did a factory reset.
Than I flashed the original Gingerbread ROM. Odin didn't give me any error message, but after the tab rebooted I got stucked in a "recovery screen" with the following message in red:
E: Failed to mount /data (invalid argument)
E: install-application-for-customer: Can't mount /data
your storage not prepared yet. please use UI menu for format and reboot actions.
There was an option for format in this recovery screen, but I was unable to select it. The volume up/down keys worked to navigate in the options, but the power button didn't make the selection.
I force the tab to shut down keep pressing the power button. Started it again and the same screen showed up.
Could you help me, which part i was fail because of this?
Try the home button as OK button in stock recovery.
Edit:
BTW, which ROM did you come from? If you were from anything that is AOSP, likely you have MTD partition.
You need a full restock with pit file and "repartition" checked in Odin to get back to BML partition that stock ROM requires.
If your ROM file doesn't have it, you better use Overcome method and its GB-stock-safe-v5 that has it.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Try the home button as OK button in stock recovery.
Edit:
BTW, which ROM did you come from? If you were from anything that is AOSP, likely you have MTD partition.
You need a full restock with pit file and "repartition" checked in Odin to get back to BML partition that stock ROM requires.
If your ROM file doesn't have it, you better use Overcome method and its GB-stock-safe-v5 that has it.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Those ROM come from youtube, i don't know much about nametag for AOSP, AOKP etc, and what is MTD and BML for each partition? ...
Related
i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
aibo said:
Try to wait a little longer. The first boot takes time.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
but the odin shows FAILED instead of PASS. is there any hope that it can boot?
Weird, odin failed at which point ? If it failed then you can't be stuck at boot screen if I remember correctly.
Sent from my GT-P1000 using XDA App
z4520ft said:
i tried flashing galaxy tab with 2.3.3 rom downloaded from samfirmware.com but it failed. then i tried flashed 2.2 rom and the result still the same. i read from the net that new firmware have locked bootloader and i suspect my tab bootloader has been locked after tried flashing the 2.3.3 rom. i know that there is patch to unlock the bootloader but it only apply when the tab is turned on. in my case the tab won't boot. is there any chance that there is patch that can be applied via download mode? or any other possible fix?
thanks in advance.
Click to expand...
Click to collapse
Is your tab still able to go to download mode?
If yes. Try flashing 2.3.3 from this forum and follow chainfire instructions. Don't download ROM from samfirmware. Just browse the Dev section and you will find everything you need to flash 2.3.3.
Good luck
Go here http://forum.xda-developers.com/showthread.php?t=1073854
SGT Running Overcome 2.0.0 RC1
My tab did the same thing, download the rom from overcome thread, put your tab in download mode and reflash
Sent from my GT-P1000 using XDA Premium App
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
z4520ft said:
Based on the log, it failed after all files in .tar has been processed. After that it shows phone n pc/modem pc screen. Then i flash the .pit file only to be able to enter download mode again (android with shovel)
Thanks for the help, i'll try it once i back home. Hope it'll be success
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just follow the instructions in the link i provided in the previous post and you'll be fine. Please do not skip steps.
SGT Running Overcome 2.0.0 RC1
Hello,
I just bought and received a tmobile 16 gb tab today off of ebay. Im not new to android. I have a droid pro and tmobile g2x. Both have cwm and able to replace factory recovery with cwm.
The tab is already rooted via superoneclick, chainfire's patch been applied.
I tried searching for cwm permanent for the tab but seem to not find a clear cut process to get a cwm recovery. Can anyone please point me in the right direction. My tab is currently running 2.2 foyo. I already know since the tab has different version and is available for many carriers, that roms are very different
Sent from my SGH-T849 using Tapatalk
If you have a gsm version, you can flash the overcome rom, it has cwm built in. Look at the overcome site or thread for instruction.
Yeah I just read through it.
So I can go ahead and load overcome via odin? Wheres stock 2.2 firmware just incase it soft bricks?
Its a gsm tab but I only use it over wifi
And should download jupiter nowipe or wipe version?
Sent from my SGH-T849 using Tapatalk
Suprah said:
Yeah I just read through it.
So I can go ahead and load overcome via odin? Wheres stock 2.2 firmware just incase it soft bricks?
Its a gsm tab but I only use it over wifi
And should download jupiter nowipe or wipe version?
Sent from my SGH-T849 using Tapatalk
Click to expand...
Click to collapse
You need to flash stock gingerbread, and then overcome wipe, its all in the instructions, good luck!
natious said:
You need to flash stock gingerbread, and then overcome wipe, its all in the instructions, good luck!
Click to expand...
Click to collapse
thank you very much, im downloading the stock safe v5 gingerbread from their site
what happens if i want to flash the cm7 testing rom or another rom in the forum? would cwm disappear?
or is it in essence perm. cwm even if i switch roms
so i followed instructions to the T and odin tool saying fail so i guess it has been bricked
im re-trying again
do i select re-partition?? because odin tool is doing nothing after retrying
have you checked your bootloader as tell in the tutorial ?
It fails at which step ? Is your bootloader locked or unlocked ? Did you put it in download mode ?
Thanks for the concerns, i ended up fixing the issue
Let it die and tested to see if it even charged when i connected it to power outlet. With stroke of luck, got it back to dl mode and now running overcome
If i flash a different rom will overcome kernel will still be on my tab? So i can keep cmw on it?
Sent from Galaxy Tab 7" W/ Overcome Rom
If you flash via cwm, you will still have cwm.
Cool thanks. So it will keep the kernel unless I flash a new one via odin
Ima try flash cm7 build via cwm
Sent from Galaxy Tab 7" W/ Overcome Rom
Beware not all zip files are flashable with cwm. If it's not specified, don't do it or you will brick your tab.
Suprah said:
Cool thanks. So it will keep the kernel unless I flash a new one via odin
Ima try flash cm7 build via cwm
Sent from Galaxy Tab 7" W/ Overcome Rom
Click to expand...
Click to collapse
If you are going to try cm7 its best to flash stock safe gingerbread again, and flash cm7 through hiedmal rather than cwm
Sent from my GT-P1000 using XDA Premium App
natious said:
If you are going to try cm7 its best to flash stock safe gingerbread again, and flash cm7 through hiedmal rather than cwm
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Dont know how to use hiedmal. Looms complicated and there is no video tutorials on it
I was thinking of flashing back to stock safe then flashing overcome kernel via odin then flash cm7 and via cwm
Sent from my GT-P1000 using Tapatalk
Suprah said:
Dont know how to use hiedmal. Looms complicated and there is no video tutorials on it
I was thinking of flashing back to stock safe then flashing overcome kernel via odin then flash cm7 and via cwm
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Its really easy man, everything its labelled where it goes
Sent from my GT-P1000 using XDA Premium App
Dont you need to use command prompt to run heimdall....
Sent from my GT-P1000 using Tapatalk
Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
erhangulsum said:
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
Click to expand...
Click to collapse
priyana said:
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
Click to expand...
Click to collapse
erhangulsum said:
Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
Click to expand...
Click to collapse
I have the same problem, but I have the P1000N and the overcome is not compatible. I am on stock GB with superoneclick root. Any suggestions?
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I restocked with Froyo that has pit, then flashed GB. Not sure if GB had pit though. Does it matter or should I flash stock safe v5 anyway first ?
priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks priyana.
Could you please post the steps as I am afraid to hard brick my tab again.
If you follow my signature, that will take you to overcome files.
The PDF guide is quite clear.
Anyway it doesn't need to be GB. You want pit file so Odin can repartition the storage.
There is a chance your internal chip is failing.
Sent from my GT-P1000 using xda app-developers app
I don't need to worry that the Overcome will brick my tab? Everything i have found says it will, or am I missing something?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
priyana said:
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
Click to expand...
Click to collapse
Ok I will try it. Thank you very much!
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
geno93n0 said:
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
Click to expand...
Click to collapse
Did that twice. Didn't help
scorpionhd2 said:
Did that twice. Didn't help
Click to expand...
Click to collapse
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
I assume so. I got it from HumberOS (i think). I will double check later as I am at work right now. I wouldn't mind it if you could post it if you have it.
geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
scorpionhd2 said:
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
Click to expand...
Click to collapse
No clue, never had to reflash my modem. That may have introduced a wild variable into the equation, because usually the dbdata trick fixes that problem.
I advise starting the whole Overcome restock process from the beginning. Try to ignore the modem part.
YAY! Fully rooted with SU and BusyBox Installed. I restocked to Froyo with PIT and Re-partition, then reflashed Froyo again (no PIT). Then flashed the dbdata.rfs.tar file. Then I was able to use Superoneclick to root and install SU & BB.
Thanks to each one of you for your help!
Deleted
I need to downgrade my Note from stock JB (N7000OXALSZ Germany) to a rooted GB and then upgrade to another version of JB (N7000OJPLSA UAE) to make my phone localized and rooted. I need step by step guide.
My phone is not rooted and doesn't have safe kernel(I've tried to flash a GB rom with pc Odin and got bootloop after that).
Go to dr ketans thread original development section step by step guide there
baz77 said:
Go to dr ketans thread original development section step by step guide there
Click to expand...
Click to collapse
I saw that thread but i couldn't find downgrading method(s) there. he just mentioned we should downgrade but didn't specify how to downgrade. and as i said my effort to downgrade was unsuccessful.
Easiest way if you can't figure it out is just use mobile Odin...
Sent from my Samsung Galaxy SV using Tapatalk 3
asf58967 said:
Easiest way if you can't figure it out is just use mobile Odin...
Click to expand...
Click to collapse
I Can't. because my phone is not rooted and mobile odin need rooted device.
Why don't you flash philz kernel for your current ROM(LSZ),do the wipes,and then move on to UAE?
AW: Downgrade from JB to GB
Than use odin for pc to flash GB.
Oh sorry, I have just seen you have already tried this. But maybe you have taken the wrong file.,. Or simply root your phone with Philz and flash the rom you want. No need to go back to GB in my opinion.
Sent from my GT-N7000 using xda app-developers app
farzaam said:
I need to downgrade my Note from stock JB (N7000OXALSZ Germany) to a rooted GB and then upgrade to another version of JB (N7000OJPLSA UAE) to make my phone localized and rooted. I need step by step guide.
My phone is not rooted and doesn't have safe kernel(I've tried to flash a GB rom with pc Odin and got bootloop after that).
Click to expand...
Click to collapse
Have your flashing to GB was successful?
Anyway reboot to recovery and check how you can make selection of choice, if it is gb recovery then you have to select file using home button while on ics and jb it uses power button.
So if your flash to GB successful and recovery is gb then wipe cache and data. It should boot normally
After this update to jb with odin
Sent from my GT-N7100 using xda premium
dr.ketan said:
Have your flashing to GB was successful?
Anyway reboot to recovery and check how you can make selection of choice, if it is gb recovery then you have to select file using home button while on ics and jb it uses power button.
So if your flash to GB successful and recovery is gb then wipe cache and data. It should boot normally
After this update to jb with odin
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks for replies,
I've just flash stock GB(from your list), not a safe kernel or anything else and it was unsuccessful(got bootloop). then i re-flash JB(Germany) to make the phone alive again(and it was successful, so i'm on JB right now), after all of this i decide to ask you what should i do for safe and successful downgrading to have rooted device on JB(UAE)?
Successful means odin was successful to flash it. Don't worry about bootloop, it's common after downgrade. So Reflash gb, if it remains successful to flash then reboot to recovery and wipe cache and data (you can confirm gb recovery by trick said in previous msg)
But if you just want to update other gb rom, then no need to go for gb, just flash jb rom of your choice, don't worry for bootloop
Flash safe kernel
Wipe cache and data
Sent from my GT-N7100 using xda premium
Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2