P1000 stay on boot, ''Internal MMC checksum failed'' - Galaxy Tab Q&A, Help & Troubleshooting

Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys

You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.

yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works

erhangulsum said:
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
Click to expand...
Click to collapse
priyana said:
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
Click to expand...
Click to collapse
erhangulsum said:
Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
Click to expand...
Click to collapse
I have the same problem, but I have the P1000N and the overcome is not compatible. I am on stock GB with superoneclick root. Any suggestions?

You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app

priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I restocked with Froyo that has pit, then flashed GB. Not sure if GB had pit though. Does it matter or should I flash stock safe v5 anyway first ?

priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks priyana.
Could you please post the steps as I am afraid to hard brick my tab again.

If you follow my signature, that will take you to overcome files.
The PDF guide is quite clear.
Anyway it doesn't need to be GB. You want pit file so Odin can repartition the storage.
There is a chance your internal chip is failing.
Sent from my GT-P1000 using xda app-developers app

I don't need to worry that the Overcome will brick my tab? Everything i have found says it will, or am I missing something?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.

priyana said:
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
Click to expand...
Click to collapse
Ok I will try it. Thank you very much!

This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.

geno93n0 said:
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
Click to expand...
Click to collapse
Did that twice. Didn't help

scorpionhd2 said:
Did that twice. Didn't help
Click to expand...
Click to collapse
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?

geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
I assume so. I got it from HumberOS (i think). I will double check later as I am at work right now. I wouldn't mind it if you could post it if you have it.

geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?

scorpionhd2 said:
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
Click to expand...
Click to collapse
No clue, never had to reflash my modem. That may have introduced a wild variable into the equation, because usually the dbdata trick fixes that problem.
I advise starting the whole Overcome restock process from the beginning. Try to ignore the modem part.

YAY! Fully rooted with SU and BusyBox Installed. I restocked to Froyo with PIT and Re-partition, then reflashed Froyo again (no PIT). Then flashed the dbdata.rfs.tar file. Then I was able to use Superoneclick to root and install SU & BB.
Thanks to each one of you for your help!

Deleted

Related

SGS Back to life using a jig.. now what?

I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!

[Q] Flashing stock rom using odin

Hello,
I will start with saying that Ive already checked every tutorial in every android website.
here is what I did.
I had Miui (Not the ICS one) I have tried to flash CM9 with the existing recovery. than something somewhere on the flash procedure go wrong and the phone just rebooted and putted in loop with no recovery option but download option. so I tried to flash the stock rom using odin 1.85, and the phone just looping on the image of the mobile operator. I did this procedure with the odin for more stock roms I found.
thanks in advance really I need your help...
http://www.theandroidsoul.com/xxjvu/
maybe you forget ‘Re-Partition’checkbox, it's important.
Hmmm.. perhaps, you have to make sure all the files are properly placed (depending on the ROM you are installing). Also, I'd recommend using a pit file (and don't forget to click on "Re-Partition".. So far, it worked for me. ^.~

[Q] [GT-I9000] want to unbrick

Hi,
I have an SGS I9000[bought in INDIA] which i guess the international version.
After an upgrade to ICS my SGS[I9000] does not turn on. After that i tried many official firmwares[XXJPU,XXJPY,XXJVA] via odin but with none my SGS turned on.
With only firmware version DDJF2,DDJG4 its booting up but "Touch" is not working.
Can please somebody guide me to turn my SGS alive!!!
Thanks...
Not sure but did you try odin with pit512 repartition checked.? Also try flash twice first with pit512, repartition checked and 3 file stock rom, second time repartition unchecked and 3 file stock rom.
Alternatively search for darky resurrection 10.2 rom on Google and follow instructions in blou post. Has a single download with all you need
Sent from my GT-I9000 using xda premium
[GT-I9000] want to unbrick
scubadude said:
Not sure but did you try odin with pit512 repartition checked.? Also try flash twice first with pit512, repartition checked and 3 file stock rom, second time repartition unchecked and 3 file stock rom.
Alternatively search for darky resurrection 10.2 rom on Google and follow instructions in blou post. Has a single download with all you need
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I already did the flashing with/without re-partition checked.
I would like to ask two things
1>is it safe to flash with Darky`s Rom as their is no CSC files?
2>Is PDA/CSC/Modem are all together in Darky`s zip File?
Thanks...
Here's a link to my simple recovery kit, contains ezbase gb ROM, ezodin, and cf root kernel, and brief instructions.txt, unzip and give it a go of you want
http://db.tt/MOGZx01S
darky Resurrection 10.2 has always unbricked my i9000 even when I used a .pit for a Sgs2 lol
Sent from my GT-I9000 using xda premium
Alvin David said:
I already did the flashing with/without re-partition checked.
I would like to ask two things
1>is it safe to flash with Darky`s Rom as their is no CSC files?
2>Is PDA/CSC/Modem are all together in Darky`s zip File?
Thanks...
Click to expand...
Click to collapse
With Darky`s Rom too it is hanging on Boot Screen...
Please help...

Rooting Note on ICS ROM PROBLEM

Hi,
I am new to Android Phones. I tried to root my Galaxy Note using the above method
2. Long, No raised couter OR Exclamation mark
-Downgrade to Rootable GB ROM and Root it. OR Download This pre rooted GB ROM and flash using PC Odin
-Wipe cache, data and delvic cache from recovery
-Install Mobile Odin Pro
-Copy ICS ROM file in .tar (you want to flash) to Internal SD card (recommended, but you can have it on EXT too)
-Download Odin (.tar) version of custom kernel like Notecore, Speedmod, CF root kernel Or other any with same function. If newbies have confusion to select, here is one for example Notecore V12 std kernel. You can use this. But newer version can be found on link mentioned above.
-Open Mobile Odin Pro
-select open file
but i run mobile odin without downloading the odin version of custom kernel (I got confused, I thought I needed to do thisafter running mobile odin) and now my phone is stuck in flashing mode for about 45mins switching on and off.
What should I do?
Thank you in advance for your help...
Christina
Flash Pre rooted ROm again Wipe cache and data and repeat procedure, that will be safe.
It worked! Thank you!
Just a quick question...
I followed all the steps mentioned on the thread up to installing mobile odin and copying the ics rom....
but I am confused with the odin version of custom kernel...I am trying to find the correct cf-root kernel through the link you provided but I can not find the KJ1. I downloaded the one you have attached below mobile odin screenshots. Is that ok?
And also where do I copy the kernel? Internal or external sd? Should it be in a specific directory in order to be detected by mobile odin?
Sorry for all these questions but I looked around and there is no specific instructions anywhere about this part.
Thank you...
Which rom you want to flash?
Sent from my GT-N7000 using xda premium
Since I am new to the android platform phones, I think it will be better if i explained what my objective is so I won't confuse you too....
I want to be able to install and use rooted applications like titanium back up. I read that in order to do this I have to root my phone.
So what I want to do now is to root my phone in order to use ie titanium black without upping my flash counter.
Also I do not care to have a custom ICS, I prefer the stock one for now until I become more familiar with all these.
I followed the steps but the customn kernel things has confused me.
My phone is as mentioned before a galaxy note with ICS 4.04 before I started the procedure, now I have Gingerbread 2.35.
What should I do?
Thank you
xrimakom said:
Since I am new to the android platform phones, I think it will be better if i explained what my objective is so I won't confuse you too....
I want to be able to install and use rooted applications like titanium back up. I read that in order to do this I have to root my phone.
So what I want to do now is to root my phone in order to use ie titanium black without upping my flash counter.
Also I do not care to have a custom ICS, I prefer the stock one for now until I become more familiar with all these.
I followed the steps but the customn kernel things has confused me.
My phone is as mentioned before a galaxy note with ICS 4.04 before I started the procedure, now I have Gingerbread 2.35.
What should I do?
Thank you
Click to expand...
Click to collapse
Go to this thread and just flash the kernel using PC Odin.(First way)
http://forum.xda-developers.com/showthread.php?t=1329360
You will have CWM and rooted device.After that you can use Titanium Backup and all other applications which required root
Sahil hez on gb rooted.rom. So no need to flash custom kernel with pc odin. i think mobile odin will b best for him.
@op
Go to first link on my signature, download any ics rom you want
Download notecore kernel std tar version
Copy both.to sd card
Now look to rom switch over from my signature and find how to use mobile odin
Post #2 of this thread also helpful to you
See group B there
http://forum.xda-developers.com/showthread.php?t=1817596
Sent from my GT-N7000 using xda premium
sahilarora2003 said:
Go to this thread and just flash the kernel using PC Odin.(First way)
http://forum.xda-developers.com/showthread.php?t=1329360
You will have CWM and rooted device.After that you can use Titanium Backup and all other applications which required root
Click to expand...
Click to collapse
Thank you for the quick reply!!!
Just to be sure, when you say first method you mean the one below
1. Short, easy - requires to reset counter
-Download Odin (.tar) version of custom kernel like Notecore, Speedmod, CF root kernel Or other any with same function. If newbies have confusion to select, here is one for example Notecore V12 std kernel. You can use this. But newer version can be found on link mentioned above.
-Flash it using PC odin for PDA tab.
-You will get exclamation mark and raised counter, which can be reset with Triangle Away
-First time opening triangle away application, it will ask to download file(flasher), let it complete. then choose to reset counter, it will restart in special recovery an finish job.\
If yes, then this brings us back - almost - to my original question....how do i use the custom kernel (cf or notecore) with odin? I know it uzips to a zimage etc but how do I use it which odin? Also which cf kernel -if iuse this one- is correct for my phone? Is there a link you can provide that explains all these?
Thank you!
It
This method helpful if you wr on ics, presently u r on gb so read my previous post.
Sent from my GT-N7000 using xda premium
xrimakom said:
Thank you for the quick reply!!!
Just to be sure, when you say first method you mean the one below
1. Short, easy - requires to reset counter
-Download Odin (.tar) version of custom kernel like Notecore, Speedmod, CF root kernel Or other any with same function. If newbies have confusion to select, here is one for example Notecore V12 std kernel. You can use this. But newer version can be found on link mentioned above.
-Flash it using PC odin for PDA tab.
-You will get exclamation mark and raised counter, which can be reset with Triangle Away
-First time opening triangle away application, it will ask to download file(flasher), let it complete. then choose to reset counter, it will restart in special recovery an finish job.\
If yes, then this brings us back - almost - to my original question....how do i use the custom kernel (cf or notecore) with odin? I know it uzips to a zimage etc but how do I use it which odin? Also which cf kernel -if iuse this one- is correct for my phone? Is there a link you can provide that explains all these?
Thank you!
It
Click to expand...
Click to collapse
First download a Custom ICS rom and then Flash it. After that follow the steps mentioned above.
Ketan +1 didn't read he is on GB rom....
dr.ketan said:
This method helpful if you wr on ics, presently u r on gb so read my previous post.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Ok,
I am on it now,
I will let you know about the result.
Thank you both for your time and help!
Ok I ve downloaded stock rom N7000XXLRI---4.0.4/12.07.19-N7000OXXLP8 and copied it to sd card
I downloaded the kernel from your signature and copied the zimage to the sd card
I started mobile odin and i went open file and chose the N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar and then changed the kernel to zimage i had moved to sd.
Now the phone keeps switching on and off showing (5 minutes now)
Mobileodin by chainfire
Kernel
flashing....
rooting....
system
flashing....
rooting....
moden
flashing....
rooting....
Cache
flasing.....
done
Is that what it should be happening?
How long should it take to complete the rooting?
should i have flashed zimage ith pc or mobile odin?
xrimakom said:
Ok I ve downloaded stock rom N7000XXLRI---4.0.4/12.07.19-N7000OXXLP8 and copied it to sd card
I downloaded the kernel from your signature and copied the zimage to the sd card
I started mobile odin and i went open file and chose the N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar and then changed the kernel to zimage i had moved to sd.
Now the phone keeps switching on and off showing (5 minutes now)
Mobileodin by chainfire
Kernel
flashing....
rooting....
system
flashing....
rooting....
moden
flashing....
rooting....
Cache
flasing.....
done
Is that what it should be happening?
How long should it take to complete the rooting?
should i have flashed zimage ith pc or mobile odin?
Click to expand...
Click to collapse
Yea its gud to go. Now u r on ics. Just follow my previous post method and you will be done with it.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
sahilarora2003 said:
Yea its gud to go. Now u r on ics. Just follow my previous post method and you will be done with it.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
I dont think that its ok because it keeps switching on and off to that screen for about 35 mins now...
Something wrong, which version of mobile odun you are using?
Sent from my GT-N7000 using xda premium
I switched the phone off and i went to download mode and flash the phone back to stock ICS 4.04 because the mobile odin flashing was stuck ( i watched a video and the flashing wasnt the same, mine kept switching on off the phone like it was missing something)
Any ideas/suggestions about what i should do now?
Phone wotking fine now on 4.0.4?
Sent from my GT-N7000 using xda premium
dr.ketan said:
Something wrong, which version of mobile odun you are using?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
prob i ll download it again from the market and i ll report back!
dr.ketan said:
Phone wotking fine now on 4.0.4?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
it seems fine....it said something about google.something missing (i didnt read it was on the screen for a sec)...but everything else looks ok...

[Q] bricked N7000. how to get working again

I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
i have the same problem
conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.

Categories

Resources