Problem with dbdata - Galaxy Tab Q&A, Help & Troubleshooting

Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx

Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app

yes i know,i saw later.can admin move this thread to help forum

i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?

The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app

No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??

fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?

I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?

thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this

If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app

No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab

CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app

Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys

For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app

If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app

Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable

Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2

Related

Need clever people

Not sure how I messed up my Bell Vibrant.
I rooted it but was stuck with 3E recovery.
So I tried to flash speedmod via Odin.
The phone went into bootloop.
So I tried Flashing Darky Rom through Odin, pit file, re-partition the works
Then it went into Recovery on reboot where I saw that the SD card wasn't mounting.
So I tried to flash dbdata.rfs.tar but this changed nothing, just the same bootloop, no mounting of the SD card again.
So what can I do? Could my flashing attempts have actually caused a hardware problem?
I have Download mode fine and via Odin everything installs but can't get past the failure to mount the SD card.
Any ideas?
Thanks!
No a flash with Odin can never cause a hardware problem.
Have you unmounted the sd card while flashing?
Bad topic subject :-/
I don't think I unmounted intentionally. Is there anywhere I can simply use Odin to clean install a whole new OS which will remount the SD Card?
I've been using Odin for a while and been flashing Roms with CWM with lots of phones. This is the wife's phone and I decided to trick it out for her for Valentines day. And I bricked it! I feel like such an ass, she's been understanding so far, but if I don't get it sorted I'm in the doghouse
http://forum.xda-developers.com/showthread.php?t=1102881
I usually get firmware from here and its always work great. The stock bell Canada one is under North America 2.3.3 ugkg3. Use a 512 pit file and repartition aswell. If this works you can always upgrade the pda with jw1 2.3.6 and root later but sounds like you just want to get it working first.
Sent from my GT-I9000 using xda premium
Thanks so much. I'll check it out and report back.
vanisleryan - thanks so much. I really appreciate it. It's all running fine again.
What is the safest way to root and overcome the 3E recovery block so I can just put roms on the SD card and flash from recovery mode?
Thanks again
Rooting depends on what firmware you used. You need to find the appropriate kernel and flash it in odin as a pda.
Sent from my GT-I9000 using xda premium
I have a bell Canada galaxy s also and I'm running jw1 2.3.6 as my pda, kg3 as my phone, and kg3 as my csc. You can mix and match the files so if you download the jw1 firmware from the link I gave you, just use the pda file and use the phone and csc files from the kg3 firmware. After that is installed download the file at the bottom of the first post in this link. http://forum.xda-developers.com/showthread.php?t=1112908
You want the one for jw1, one has a "bm" on it one doesn't, you want the one that doesn't. It does not need to be extracted. Flash in odin as pda. Then you will be rooted. I don't know if that kernel contains the cwm apk, you may need to do a search for it. As you will need cwm to install custom roms. Pretty sure it's in that thread somewhere. Just do a search.
Sent from my GT-I9000 using xda premium

[SOLVED] soft bricked p1000(GSM)

today i tried remove Google maps from my tab using titanium backup. I tried install another version of maps but it didn't work so I restored backup what I did before uninstalling. I rebooted my tab and it gets past boot loco and "first" boot animation. Tab goes to Samsung loco (second boot animation) but it vibrates one time and then three times (something fc) and it freezes for few seconds and then it starts "second" boot animation again (Samsung loco). this continuous forever. I tried data wipe in stock recovery but it didn't help. Can someone help me and give me full instructions because I have never modded any Samsung device (I have Huawei u8800 witch doesn't have download mode etc.) I have only Mac so I can't use odin. I think I have no warranty because my dad got this tab from one conference in Portugal. Thanks for all who can help me.
I have rooted stock 2.2 firmware.
Sent from my U8800 using Tapatalk 2
If you are trying to go back to unrooted stock firmware, you can follow this instruction:
http://forum.xda-developers.com/showthread.php?p=19763536#post19763536
If you want safe rooted gingerbread download this gb-stock-safe on teamovercome website:
http://www.teamovercome.net/p1000/?page_id=21
Use the same set of instructiom on the first post except for the downloading part.
If you want to flash a nice and stable ROM, you can download the latest version of teamovercome ROM. Look around on the dev forum, and search for teamovercom.
Thanks, I'll try later today when I'm in home.
Sent from my U8800 using Tapatalk 2
Oh I missed what you said about having only Mac and no PC.
Please use heimdall, see this post:
Introduction on Heimdall:
http://forum.xda-developers.com/showthread.php?t=834195
Flashing P1000 ROM using Heimdall (but for windows)
http://forum.xda-developers.com/showthread.php?t=1508703
Using Heimdall on Mac (But not P1000)
http://forum.xda-developers.com/showthread.php?t=1127419
http://forum.xda-developers.com/showthread.php?t=878686
Also, since you were from froyo (2.2), if you want to upgrade to gingerbread, you have a better chance flashing gb-stock-safe from the teamovercome website.
Follow the instruction about fixing bootloader (I think you will need to find windows for this one).
Otherwise, you will need to find pit file (repartition) and dbdata.rfs because many gingerbread ROM packages (zip or rar files) do not contain pit file or dbdata.rfs in it -- I upgraded a froyo to gingerbread without fixing the bootloader before..by repartitioning with the pit file and laoding GB's dbdata.rfs but Can't guarantee it will work for yours.
I downloaded heimdall but it needs admin pass to install but I found odin for Mac
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz said:
I downloaded heimdall but it needs admin pass to install but I found odin for Mac
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
Really? Wow! Finally.
Good luck. Please post back after you successfully flash a rom.
I have another problem:
I need get my data out from internal sd because flashing will format it. Is this possible?
Sent from my U8800 using Tapatalk 2
sure, I do it all the time.
Use a file explorer.
select everything on the sdcard, copy it and paste it to a folder in external sd card.
priyana said:
sure, I do it all the time.
Use a file explorer.
select everything on the sdcard, copy it and paste it to a folder in external sd card.
Click to expand...
Click to collapse
I can't boot phone and I think data wipe disabled USB debugging.
EDIT: I can access adb in recovery but it doesn't mount sdcard.
EDIT: I'll try flashing cf-root first so I can use CWM to get my files from internal sdcard.
Oh you are trying to retrieve data from internal sd card, my bad.
Ok. Installing cf-root may solve ur problem.
I try first get data from internal sd and then unbrick tab... Odin for Mac didn't recognize device...now trying to use heimdall in virtual box.
Sent from my U8800 using Tapatalk 2
While we are at this, may I ask if anyone has their internal SD wiped during restocking to gb-stock-safe v5 using odin or heimdall?
Or when flashing any rom.
I recently use heimdall to flash the stock safe with repartition and the card isn't wiped.
Sent from my GT-P1000 using XDA
I read overcome guide and it said it will wipe all, but I think it will only wipe all if you install overcome kernel + rom.
Sent from my U8800 using Tapatalk 2
Well I restock and flash overcome kernel both using heimdall though.
Sdcards intact .
Sent from my GT-P1000 using XDA
I need USB drivers for Mac?
Sent from my U8800 using Tapatalk 2
I have no experience in Mac but I thought it should be driverless like Linux.
In Ubuntu I only need to add one line in my udev rules, and install android sdk
And when I plug in my device, and type
adb devices
It shows my serial number
Then I unpack my heimdall and I can flash.
Maybe you read a bit about installing android sdk and how to use adb with p1000 with adb in Mac.
Once ad see it, put in download mode and you can flash with heimdall.
Sent from my GT-P1000 using XDA
I have Android sdk and I have used adb on my Mac. It recognizes my tab with adb devices at least in recovery mode. I'll try flashing overcome stock gb tomorrow.
Sent from my U8800 using Tapatalk 2
I really don't know which process will wipe your internal sd, and what will be the safest way.
But I am quite sure that I have been switching kernels when I was on overcome, and it didn't touch my internal sd.
But you can try flash cf-root kernel like yappoe said,
then boot to recovery and mount the internal sd
you can then pull the files from adb.. or at least that is what I think...
Anyway, if you decide to proceed with re-stock, I did it like this:
$ heimdall flash --repartition --pit ./gt-p1000_mr.pit --factoryfs ./factoryfs.rfs --cache ./cache.rfs --dbdata ./hidden.rfs --primary-boot ./boot.bin --secondary-boot ./Sbl.bin --param ./param.lfs --kernel ./zImage
hope it helps.
priyana said:
I really don't know which process will wipe your internal sd
Click to expand...
Click to collapse
Flashing overcome rom
Sent from my U8800 using Tapatalk 2
Best of luck!

GT-p1000 stuck at samsung logo

so i was flowing the guide on cyanogenmod to install the CMW
after i successfully installed it the device booted up and just stayed at the Samsung logo. please help me
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Use overcome method.
Read my post here.
http://forum.xda-developers.com/showthread.php?p=27500461
Replace anything AOKP with cm9 there, but the install method is the same.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
so i did do that just now but it didnt work i used another process and know my tab goes into CWM and when i wipe data,cache and dalivk then i install the CM9 it boots then i see the logo of cyanogenmod then it boots into CWM with out me holding any buttons
then flash CM9 again once more.
First round converts BML partition to MTD partition
priyana said:
then flash CM9 again once more.
First round converts BML partition to MTD partition
Click to expand...
Click to collapse
sweet it worked thanks!!!!!
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
priyana said:
it is well documented, the bootloop when come from non-MTD.
Remember to flash gapps-ics
Click to expand...
Click to collapse
already did and thanks for the help
Galaxy tab stuck on samsung logo
Hi,
my p1000 is stuck on the samsung logo screen, Ive tried following all documentation, it says to copy the files to the external sd card, how do i get to external sd card if the tab wont boot up and windows cant see the device???
sorry to be a pain
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
hi my galaxy tab was on ics and i tried to flash back original gingerbread rom, i flashed through odin which everything passed, it then boots up with recovery does what it does, powers back on but its stuck on samsung logo, it was purchased from carphone warehouse, does anyone know wha i did wrong
Were you using overcome gb stock safe v5?
And make sure you use the Odin of correct version, like the one in the package.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Can you boot to recovery or download mode?
What have you done so far to get to this stage.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hey Priyana, I got the same problem.
I can boot to download mod but cant boot recovery mod, and my device is also not recognized when connected to PC
Any suggestion?
Usually just have to keep trying for Odin to detect the device.
Failing that you need a fresh pc.
Sent from my GT-I9300 using xda app-developers app
debrick galaxy tab
see my thread > http://forum.xda-developers.com/showthread.php?p=34872552#post34872552
Hi, please keep all question/help related threads in the Q&A section only please. Thank You.
Thread Moved.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
i have the same problem stuck on samsung logo after installing cwm , i tried to use the overcome through odin but in download mode it doesnt recognise my phone only when i put it in recovery mode(power button and volume UP button pressed) it recognise it but when i press start( after i have put the firmware the pit file etc. and then conecting my tab) odin stacks at set up connection ... im really confused if anyopne can help i would really apreciate it.
ps. i have a sim card on and an sd tried to remove sd but made no difference
ty in advance
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Another guy got the same issue, can't detect in Odin.
he went to safe mode to remove the Samsung USB driver and reinstall the one from gb-stock-safe-v5 and was good.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
theanks a lot but im not an advance usere can you tell me how can i do that i mean i remove the driver on my pc( in de vice manager is recognised as gadget serial) and after were can i find gb-stock-safe-v5
thankls again again for spending time to answear my problem
also in what state should my device be when to plug it etc ty again
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
priyana said:
follow my signature go get the GB-stock-safe-v5 and also the overcome guide.
Follow the page 7 instruction on how to use Odin.
The Odin needs to be version 1.7, like the one included in GB-stock-safe-v5
When driver is good, Odin detects your tab when it is in Download mode, and you can flash the GB-stock-safe-v5
Click to expand...
Click to collapse
thak you very much for the quick response i will post results

P1000 stay on boot, ''Internal MMC checksum failed''

Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
erhangulsum said:
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
Click to expand...
Click to collapse
priyana said:
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
Click to expand...
Click to collapse
erhangulsum said:
Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
Click to expand...
Click to collapse
I have the same problem, but I have the P1000N and the overcome is not compatible. I am on stock GB with superoneclick root. Any suggestions?
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I restocked with Froyo that has pit, then flashed GB. Not sure if GB had pit though. Does it matter or should I flash stock safe v5 anyway first ?
priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks priyana.
Could you please post the steps as I am afraid to hard brick my tab again.
If you follow my signature, that will take you to overcome files.
The PDF guide is quite clear.
Anyway it doesn't need to be GB. You want pit file so Odin can repartition the storage.
There is a chance your internal chip is failing.
Sent from my GT-P1000 using xda app-developers app
I don't need to worry that the Overcome will brick my tab? Everything i have found says it will, or am I missing something?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
priyana said:
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
Click to expand...
Click to collapse
Ok I will try it. Thank you very much!
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
geno93n0 said:
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
Click to expand...
Click to collapse
Did that twice. Didn't help
scorpionhd2 said:
Did that twice. Didn't help
Click to expand...
Click to collapse
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
I assume so. I got it from HumberOS (i think). I will double check later as I am at work right now. I wouldn't mind it if you could post it if you have it.
geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
scorpionhd2 said:
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
Click to expand...
Click to collapse
No clue, never had to reflash my modem. That may have introduced a wild variable into the equation, because usually the dbdata trick fixes that problem.
I advise starting the whole Overcome restock process from the beginning. Try to ignore the modem part.
YAY! Fully rooted with SU and BusyBox Installed. I restocked to Froyo with PIT and Re-partition, then reflashed Froyo again (no PIT). Then flashed the dbdata.rfs.tar file. Then I was able to use Superoneclick to root and install SU & BB.
Thanks to each one of you for your help!
Deleted

Unbrick Samsung Galaxy Note GT-N7000

Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?
Some pretty basic reading for you: http://forum.xda-developers.com/showthread.php?t=1321268
Enjoy.
Moved To Q&A​
Please do not start question threads in the development section​
baseliner said:
Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?
Click to expand...
Click to collapse
First of all, I'm not sure if this is the answer your looking for, but here is it anyway.
IN PC ODIN, there is a 'PDA' button (same button you flashed your kernel to), you need to download the ROM's zip file and flash it from there.
Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Would these be the files needed to get my phone back up and running? I am new to Android and screwed my phone up after a factory reset, now it just reads downloading for ages and does nothing. I still get a screen that reads Hyperdroid RedPill Recovery when i power on with volume button up pressed. Volume down I get Android man and it reads downloading but does nothing.
I have looked all over for this situation but seem to get a piece here and there and not the exact same issue all in one so I am reluctant to just do something and make it worse.
Please advise
That is downloading mod, it won't do anything but remain as it is, if you don't do anything.
You need to connect you device to PC in this state and have to use odin
Read 1st line on my sign and read post#2, you will get full instruction, how to use odin.
Sent from my GT-N7000 using xda premium

Categories

Resources