Need clever people - Galaxy S I9000 Q&A, Help & Troubleshooting

Not sure how I messed up my Bell Vibrant.
I rooted it but was stuck with 3E recovery.
So I tried to flash speedmod via Odin.
The phone went into bootloop.
So I tried Flashing Darky Rom through Odin, pit file, re-partition the works
Then it went into Recovery on reboot where I saw that the SD card wasn't mounting.
So I tried to flash dbdata.rfs.tar but this changed nothing, just the same bootloop, no mounting of the SD card again.
So what can I do? Could my flashing attempts have actually caused a hardware problem?
I have Download mode fine and via Odin everything installs but can't get past the failure to mount the SD card.
Any ideas?
Thanks!

No a flash with Odin can never cause a hardware problem.
Have you unmounted the sd card while flashing?

Bad topic subject :-/

I don't think I unmounted intentionally. Is there anywhere I can simply use Odin to clean install a whole new OS which will remount the SD Card?
I've been using Odin for a while and been flashing Roms with CWM with lots of phones. This is the wife's phone and I decided to trick it out for her for Valentines day. And I bricked it! I feel like such an ass, she's been understanding so far, but if I don't get it sorted I'm in the doghouse

http://forum.xda-developers.com/showthread.php?t=1102881
I usually get firmware from here and its always work great. The stock bell Canada one is under North America 2.3.3 ugkg3. Use a 512 pit file and repartition aswell. If this works you can always upgrade the pda with jw1 2.3.6 and root later but sounds like you just want to get it working first.
Sent from my GT-I9000 using xda premium

Thanks so much. I'll check it out and report back.

vanisleryan - thanks so much. I really appreciate it. It's all running fine again.
What is the safest way to root and overcome the 3E recovery block so I can just put roms on the SD card and flash from recovery mode?
Thanks again

Rooting depends on what firmware you used. You need to find the appropriate kernel and flash it in odin as a pda.
Sent from my GT-I9000 using xda premium

I have a bell Canada galaxy s also and I'm running jw1 2.3.6 as my pda, kg3 as my phone, and kg3 as my csc. You can mix and match the files so if you download the jw1 firmware from the link I gave you, just use the pda file and use the phone and csc files from the kg3 firmware. After that is installed download the file at the bottom of the first post in this link. http://forum.xda-developers.com/showthread.php?t=1112908
You want the one for jw1, one has a "bm" on it one doesn't, you want the one that doesn't. It does not need to be extracted. Flash in odin as pda. Then you will be rooted. I don't know if that kernel contains the cwm apk, you may need to do a search for it. As you will need cwm to install custom roms. Pretty sure it's in that thread somewhere. Just do a search.
Sent from my GT-I9000 using xda premium

Related

SGS Back to life using a jig.. now what?

I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!

Bell SGS bricked or saveable?

Hi,
This is my first time experimenting with flashing custom roms. I was trying to flash a custom rom onto my perfectly working newly rooted sgs (using odin), but the first rom i tried has gotten my phone to boot loop and now I don't know what to do with it. I can get to the download screen just fine and recovery mode but don't knwo what to do. Please help, I really can't afford a new phone/ don't know if samsung will let me replace it now.
Oh, the rom was the XXJVK Gingerbread which is near the top of the forums right now, if that helps at all.
I really just need my phone to be usable, I didn't expect to mess it up. Thanks again to anyone with information.
I assume you were running jl2. The problem might be because of bootloader issue.
When you were flashing gingerbread did you use pit file and repartition?
I am not a pro but If you download JL2 and flash it, should be good to go. Try not to repartition and flash without using pit file.
I did use the .pit and repartition. I'm guessing this was a no no? I'll look for jl2 and try flashing that. Might you direct me to the right download?
http://www.multiupload.com/6GRS1OWRJW
I have no idea if it will work or not. Same thing happened to me also when I was trying to flash darkys rom and I was able to open the phone after I flashed with bells original rom. Give it a try. If its a boot loop I assume its a firmware problem. You should be able to fix it. The problem might be the repartirion and pit file. I am not sure about it. Hope this helps.
Just try flashing again with boot loader update ticked in odin. I'm pretty sure that repartition and pit do nothing to the bootloader. If that doesn't work I'll add more after I shower, I stink!
Sent from my GT - I9000 running Darky's 9.5 w/ DamianGTO's Ultimate Kernel using XDA Premium App.
A bootloop = ****ed framework and/or /system/ (rom)
Flashing bootloaders will not fix the problem, they are not related at all. And if a bootloader flash fails your phone will actually be bricked.
Just flash a stock rom with odin. I recommend jl2 if you want to go official stock, js8 for fastest froyo stock or jvk for the latest leaked beta. Tick update bootloaders for jvk or jl2 flash because jvk requires jvk bootloaders and jl2 because it supposedly fixes corruption problems. Remember bootloaders are overwritten every time you flash them and us risky.
Sent from my GT-I9000 using XDA Premium App
Thanks a million guys, I did flash the stock jl2 (no .pit or partition, nor bootloader update) and the phone booted. It fed me a gajillion force closes, but i managed to connect to kies and updated it that way, so now I have a perfetly working phone again. I'll probably experiment with a few more things now that I know how to fix this.
Again, Thanks guys!

[Q] Major issues with the i9000 right now. Please Help.

Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Well I just tested the SD card in another phone and it works fine. So it's definitely the software/rom I'm using now I think.
Is there anything I can do to make this work. Maybe like a completely stock 2.2.1, that is guaranteed to work haha? I just need this card to be read. Because even when I plug the phone and run Kies, Kies doesn't recognize the version of the firmware. And If I try to use superoneclick root, it also doesn't recognize the version of the firmware.
So right now I'm using 2.2.1 XWJSD, which stock rom should I install with odin or Heimdall to make this work?
Thanks a lot again.
Head over to this thread and download JVZ (Gingerbread 2.3.6), flash with Odin with re-partition checked, then head over to Chainfire's thread for CF-Root kernel for JVZ and flash that through Odin as well.
Forget about Kies since you'll no longer be using that to update firmware and whatnot.
CF-Root will come with CWM installed, so after you get that done, download MIUI and flash through CWM
Thanks a lot will try it out.
This CF-Root right? CF-Root-XX_OXA_JVZ-v4.3-CWM3RFS.zip
Unfortunately the phone is stuck in a bootloop now after installing 2.3.6 JVZ.
Did you make sure re-partition is checked? If it still bootloops after re-partition then try JVT or some other stock ROM and see if that boots up before applying the CF-Root kernel
Yeah I made sure re-partition is checked, and I installed it with the 512 pit file, unless I shouldn't be using the .pit?
your gona have to reflash the rom or install arom thats already rooted you could try darky 10.2 re or check out puggerduk on tube
Root Galaxy S i9000 and install a custom rom
Hey guys refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1451345
He's having the same issue, so just help us out there Thanks alot!
eclipse245 said:
Hey guys,
So recently I tried rooting my phone with CF-Root and Odin, and then it went into a boot loop of just the Galaxy S on startup.
I eventually found out about Heimdall and right now I'm running 2.2.1 Froyo with Build XWJSD.
Problem is, that the phone doesn't read the SD card? Like it will see the SD Card, scan it, and say it's finished scanning but then it won't let me access it either in CWM or through the Android UI itself.
Any ideas? I just want to get MIUI installed haha.
Click to expand...
Click to collapse
MIUI is running based on Android 2.3, I found the Android forum that helps me well enough to do my first flashing and rooting. Here is what you need to try to do:
1. Flash your i9000 with XXJVU 2.3.6 ( Value Pack ):
http://www.theandroidsoul.com/xxjvu/
2. Root your I9000 with CF-Root-XX OXA JVU 2.3.6-v4.3-CWM3RFS:
http://www.theandroidsoul.com/root-xxjvu-firmware/
Do everything on the post and you can install MIUI ROM from recovery straight away after that.
Hope this helps. If it does, please consider press 'THANKS' button

P1000 stay on boot, ''Internal MMC checksum failed''

Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
erhangulsum said:
yes, i found it here in xda, and it worked. but thanks for your reply, if someone has same problem they can read your message. it works
Click to expand...
Click to collapse
priyana said:
You have gone this far for nothing.
No Play or Gmail means you just need to flash gapps.
I know people say nightlies no need to flash gapps.
But if gapps is missing, just flash gapps again.
Now you are at this stage,
use Overcome method:
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Once done, continue to flash overcome kernel tar using Odin
and then boot to CWM recovery and flash CM9 twice
then flash gapps.
Hopefully that solve your problem.
Click to expand...
Click to collapse
erhangulsum said:
Hi all,
i bought a galaxy tab last month, and i installed cyanogenmod 9 nightlies. i was using without problem. but after 23.07 nightlies i got play store error. it wouldnt open. i saw that google account was removed. than i wanted full factory reset and wipe sd card and than clean cyanogenmod install...
Off course clockwork recoverymod was also deleted (i know i am stupid!)
Than i found some p1000 stock roms and tried install with odin. And i did it, installed rom without problem but when i turn my tablet on its waiting on boot screen. it doesnt turn on. stays on boot.
I found this when i was on recovery mod (tablets stock recovery) SEE ATTACHMENT PLEASE.
Now i have a tablet and i cant do anything. I think if i have a 3 files stock rom i can flash it with odin.
Do you know what do i have to do now? Please help me guys
Click to expand...
Click to collapse
I have the same problem, but I have the P1000N and the overcome is not compatible. I am on stock GB with superoneclick root. Any suggestions?
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I restocked with Froyo that has pit, then flashed GB. Not sure if GB had pit though. Does it matter or should I flash stock safe v5 anyway first ?
priyana said:
You can restock using GB stock safe v5 once, then flash your N stock GB again.
Or if your stock has pit file, you don't need GB stock safe v5.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks priyana.
Could you please post the steps as I am afraid to hard brick my tab again.
If you follow my signature, that will take you to overcome files.
The PDF guide is quite clear.
Anyway it doesn't need to be GB. You want pit file so Odin can repartition the storage.
There is a chance your internal chip is failing.
Sent from my GT-P1000 using xda app-developers app
I don't need to worry that the Overcome will brick my tab? Everything i have found says it will, or am I missing something?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
priyana said:
well, I don't know for sure.
But the P1000N/L has different touch screen driver in their kernel.
You can flash it using Odin and you can even use the recovery, since CWM isn't touch screen based.
But that is not what I am saying above.
You asked for guide, I said Overcome guide is clear.
Have you even download the PDF and read?
Page 7/8 has picture of what to put in Odin fields. You can put GB stock safe v4, v5, or whatever, a Panama or Trinidad based GB, or even Froyo, the picture is still going to be the same (or similar).
So, use your froyo, use the guide. (or not) up to you.
Click to expand...
Click to collapse
Ok I will try it. Thank you very much!
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
geno93n0 said:
This error regularly happens when flashing stock ROMs. Then you will have to download and flash dbdata.tar as PDA in Odin (Google "P1000 dbdata.tar"; it's about 1.25MB or so). This solves it for me and a few others.
Click to expand...
Click to collapse
Did that twice. Didn't help
scorpionhd2 said:
Did that twice. Didn't help
Click to expand...
Click to collapse
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
I assume so. I got it from HumberOS (i think). I will double check later as I am at work right now. I wouldn't mind it if you could post it if you have it.
geno93n0 said:
I just restocked less than an hour ago and ran into the same thing. Are you using the right PIT for your model?
Click to expand...
Click to collapse
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
scorpionhd2 said:
OK so I am using the correct PIT, or so I understand. I even tried reflashing the dbdata.tar as PDA in Odin. Still no change.
Could this have an affect on the modem of the tab as well and cause it not to read the sim?
Click to expand...
Click to collapse
No clue, never had to reflash my modem. That may have introduced a wild variable into the equation, because usually the dbdata trick fixes that problem.
I advise starting the whole Overcome restock process from the beginning. Try to ignore the modem part.
YAY! Fully rooted with SU and BusyBox Installed. I restocked to Froyo with PIT and Re-partition, then reflashed Froyo again (no PIT). Then flashed the dbdata.rfs.tar file. Then I was able to use Superoneclick to root and install SU & BB.
Thanks to each one of you for your help!
Deleted

Problem with dbdata

Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2

Categories

Resources