today i tried remove Google maps from my tab using titanium backup. I tried install another version of maps but it didn't work so I restored backup what I did before uninstalling. I rebooted my tab and it gets past boot loco and "first" boot animation. Tab goes to Samsung loco (second boot animation) but it vibrates one time and then three times (something fc) and it freezes for few seconds and then it starts "second" boot animation again (Samsung loco). this continuous forever. I tried data wipe in stock recovery but it didn't help. Can someone help me and give me full instructions because I have never modded any Samsung device (I have Huawei u8800 witch doesn't have download mode etc.) I have only Mac so I can't use odin. I think I have no warranty because my dad got this tab from one conference in Portugal. Thanks for all who can help me.
I have rooted stock 2.2 firmware.
Sent from my U8800 using Tapatalk 2
If you are trying to go back to unrooted stock firmware, you can follow this instruction:
http://forum.xda-developers.com/showthread.php?p=19763536#post19763536
If you want safe rooted gingerbread download this gb-stock-safe on teamovercome website:
http://www.teamovercome.net/p1000/?page_id=21
Use the same set of instructiom on the first post except for the downloading part.
If you want to flash a nice and stable ROM, you can download the latest version of teamovercome ROM. Look around on the dev forum, and search for teamovercom.
Thanks, I'll try later today when I'm in home.
Sent from my U8800 using Tapatalk 2
Oh I missed what you said about having only Mac and no PC.
Please use heimdall, see this post:
Introduction on Heimdall:
http://forum.xda-developers.com/showthread.php?t=834195
Flashing P1000 ROM using Heimdall (but for windows)
http://forum.xda-developers.com/showthread.php?t=1508703
Using Heimdall on Mac (But not P1000)
http://forum.xda-developers.com/showthread.php?t=1127419
http://forum.xda-developers.com/showthread.php?t=878686
Also, since you were from froyo (2.2), if you want to upgrade to gingerbread, you have a better chance flashing gb-stock-safe from the teamovercome website.
Follow the instruction about fixing bootloader (I think you will need to find windows for this one).
Otherwise, you will need to find pit file (repartition) and dbdata.rfs because many gingerbread ROM packages (zip or rar files) do not contain pit file or dbdata.rfs in it -- I upgraded a froyo to gingerbread without fixing the bootloader before..by repartitioning with the pit file and laoding GB's dbdata.rfs but Can't guarantee it will work for yours.
I downloaded heimdall but it needs admin pass to install but I found odin for Mac
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz said:
I downloaded heimdall but it needs admin pass to install but I found odin for Mac
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
Really? Wow! Finally.
Good luck. Please post back after you successfully flash a rom.
I have another problem:
I need get my data out from internal sd because flashing will format it. Is this possible?
Sent from my U8800 using Tapatalk 2
sure, I do it all the time.
Use a file explorer.
select everything on the sdcard, copy it and paste it to a folder in external sd card.
priyana said:
sure, I do it all the time.
Use a file explorer.
select everything on the sdcard, copy it and paste it to a folder in external sd card.
Click to expand...
Click to collapse
I can't boot phone and I think data wipe disabled USB debugging.
EDIT: I can access adb in recovery but it doesn't mount sdcard.
EDIT: I'll try flashing cf-root first so I can use CWM to get my files from internal sdcard.
Oh you are trying to retrieve data from internal sd card, my bad.
Ok. Installing cf-root may solve ur problem.
I try first get data from internal sd and then unbrick tab... Odin for Mac didn't recognize device...now trying to use heimdall in virtual box.
Sent from my U8800 using Tapatalk 2
While we are at this, may I ask if anyone has their internal SD wiped during restocking to gb-stock-safe v5 using odin or heimdall?
Or when flashing any rom.
I recently use heimdall to flash the stock safe with repartition and the card isn't wiped.
Sent from my GT-P1000 using XDA
I read overcome guide and it said it will wipe all, but I think it will only wipe all if you install overcome kernel + rom.
Sent from my U8800 using Tapatalk 2
Well I restock and flash overcome kernel both using heimdall though.
Sdcards intact .
Sent from my GT-P1000 using XDA
I need USB drivers for Mac?
Sent from my U8800 using Tapatalk 2
I have no experience in Mac but I thought it should be driverless like Linux.
In Ubuntu I only need to add one line in my udev rules, and install android sdk
And when I plug in my device, and type
adb devices
It shows my serial number
Then I unpack my heimdall and I can flash.
Maybe you read a bit about installing android sdk and how to use adb with p1000 with adb in Mac.
Once ad see it, put in download mode and you can flash with heimdall.
Sent from my GT-P1000 using XDA
I have Android sdk and I have used adb on my Mac. It recognizes my tab with adb devices at least in recovery mode. I'll try flashing overcome stock gb tomorrow.
Sent from my U8800 using Tapatalk 2
I really don't know which process will wipe your internal sd, and what will be the safest way.
But I am quite sure that I have been switching kernels when I was on overcome, and it didn't touch my internal sd.
But you can try flash cf-root kernel like yappoe said,
then boot to recovery and mount the internal sd
you can then pull the files from adb.. or at least that is what I think...
Anyway, if you decide to proceed with re-stock, I did it like this:
$ heimdall flash --repartition --pit ./gt-p1000_mr.pit --factoryfs ./factoryfs.rfs --cache ./cache.rfs --dbdata ./hidden.rfs --primary-boot ./boot.bin --secondary-boot ./Sbl.bin --param ./param.lfs --kernel ./zImage
hope it helps.
priyana said:
I really don't know which process will wipe your internal sd
Click to expand...
Click to collapse
Flashing overcome rom
Sent from my U8800 using Tapatalk 2
Best of luck!
Related
Not sure how I messed up my Bell Vibrant.
I rooted it but was stuck with 3E recovery.
So I tried to flash speedmod via Odin.
The phone went into bootloop.
So I tried Flashing Darky Rom through Odin, pit file, re-partition the works
Then it went into Recovery on reboot where I saw that the SD card wasn't mounting.
So I tried to flash dbdata.rfs.tar but this changed nothing, just the same bootloop, no mounting of the SD card again.
So what can I do? Could my flashing attempts have actually caused a hardware problem?
I have Download mode fine and via Odin everything installs but can't get past the failure to mount the SD card.
Any ideas?
Thanks!
No a flash with Odin can never cause a hardware problem.
Have you unmounted the sd card while flashing?
Bad topic subject :-/
I don't think I unmounted intentionally. Is there anywhere I can simply use Odin to clean install a whole new OS which will remount the SD Card?
I've been using Odin for a while and been flashing Roms with CWM with lots of phones. This is the wife's phone and I decided to trick it out for her for Valentines day. And I bricked it! I feel like such an ass, she's been understanding so far, but if I don't get it sorted I'm in the doghouse
http://forum.xda-developers.com/showthread.php?t=1102881
I usually get firmware from here and its always work great. The stock bell Canada one is under North America 2.3.3 ugkg3. Use a 512 pit file and repartition aswell. If this works you can always upgrade the pda with jw1 2.3.6 and root later but sounds like you just want to get it working first.
Sent from my GT-I9000 using xda premium
Thanks so much. I'll check it out and report back.
vanisleryan - thanks so much. I really appreciate it. It's all running fine again.
What is the safest way to root and overcome the 3E recovery block so I can just put roms on the SD card and flash from recovery mode?
Thanks again
Rooting depends on what firmware you used. You need to find the appropriate kernel and flash it in odin as a pda.
Sent from my GT-I9000 using xda premium
I have a bell Canada galaxy s also and I'm running jw1 2.3.6 as my pda, kg3 as my phone, and kg3 as my csc. You can mix and match the files so if you download the jw1 firmware from the link I gave you, just use the pda file and use the phone and csc files from the kg3 firmware. After that is installed download the file at the bottom of the first post in this link. http://forum.xda-developers.com/showthread.php?t=1112908
You want the one for jw1, one has a "bm" on it one doesn't, you want the one that doesn't. It does not need to be extracted. Flash in odin as pda. Then you will be rooted. I don't know if that kernel contains the cwm apk, you may need to do a search for it. As you will need cwm to install custom roms. Pretty sure it's in that thread somewhere. Just do a search.
Sent from my GT-I9000 using xda premium
Hi,
I am new to Android Phones. I tried to root my Galaxy Note using the above method
2. Long, No raised couter OR Exclamation mark
-Downgrade to Rootable GB ROM and Root it. OR Download This pre rooted GB ROM and flash using PC Odin
-Wipe cache, data and delvic cache from recovery
-Install Mobile Odin Pro
-Copy ICS ROM file in .tar (you want to flash) to Internal SD card (recommended, but you can have it on EXT too)
-Download Odin (.tar) version of custom kernel like Notecore, Speedmod, CF root kernel Or other any with same function. If newbies have confusion to select, here is one for example Notecore V12 std kernel. You can use this. But newer version can be found on link mentioned above.
-Open Mobile Odin Pro
-select open file
but i run mobile odin without downloading the odin version of custom kernel (I got confused, I thought I needed to do thisafter running mobile odin) and now my phone is stuck in flashing mode for about 45mins switching on and off.
What should I do?
Thank you in advance for your help...
Christina
Flash Pre rooted ROm again Wipe cache and data and repeat procedure, that will be safe.
It worked! Thank you!
Just a quick question...
I followed all the steps mentioned on the thread up to installing mobile odin and copying the ics rom....
but I am confused with the odin version of custom kernel...I am trying to find the correct cf-root kernel through the link you provided but I can not find the KJ1. I downloaded the one you have attached below mobile odin screenshots. Is that ok?
And also where do I copy the kernel? Internal or external sd? Should it be in a specific directory in order to be detected by mobile odin?
Sorry for all these questions but I looked around and there is no specific instructions anywhere about this part.
Thank you...
Which rom you want to flash?
Sent from my GT-N7000 using xda premium
Since I am new to the android platform phones, I think it will be better if i explained what my objective is so I won't confuse you too....
I want to be able to install and use rooted applications like titanium back up. I read that in order to do this I have to root my phone.
So what I want to do now is to root my phone in order to use ie titanium black without upping my flash counter.
Also I do not care to have a custom ICS, I prefer the stock one for now until I become more familiar with all these.
I followed the steps but the customn kernel things has confused me.
My phone is as mentioned before a galaxy note with ICS 4.04 before I started the procedure, now I have Gingerbread 2.35.
What should I do?
Thank you
xrimakom said:
Since I am new to the android platform phones, I think it will be better if i explained what my objective is so I won't confuse you too....
I want to be able to install and use rooted applications like titanium back up. I read that in order to do this I have to root my phone.
So what I want to do now is to root my phone in order to use ie titanium black without upping my flash counter.
Also I do not care to have a custom ICS, I prefer the stock one for now until I become more familiar with all these.
I followed the steps but the customn kernel things has confused me.
My phone is as mentioned before a galaxy note with ICS 4.04 before I started the procedure, now I have Gingerbread 2.35.
What should I do?
Thank you
Click to expand...
Click to collapse
Go to this thread and just flash the kernel using PC Odin.(First way)
http://forum.xda-developers.com/showthread.php?t=1329360
You will have CWM and rooted device.After that you can use Titanium Backup and all other applications which required root
Sahil hez on gb rooted.rom. So no need to flash custom kernel with pc odin. i think mobile odin will b best for him.
@op
Go to first link on my signature, download any ics rom you want
Download notecore kernel std tar version
Copy both.to sd card
Now look to rom switch over from my signature and find how to use mobile odin
Post #2 of this thread also helpful to you
See group B there
http://forum.xda-developers.com/showthread.php?t=1817596
Sent from my GT-N7000 using xda premium
sahilarora2003 said:
Go to this thread and just flash the kernel using PC Odin.(First way)
http://forum.xda-developers.com/showthread.php?t=1329360
You will have CWM and rooted device.After that you can use Titanium Backup and all other applications which required root
Click to expand...
Click to collapse
Thank you for the quick reply!!!
Just to be sure, when you say first method you mean the one below
1. Short, easy - requires to reset counter
-Download Odin (.tar) version of custom kernel like Notecore, Speedmod, CF root kernel Or other any with same function. If newbies have confusion to select, here is one for example Notecore V12 std kernel. You can use this. But newer version can be found on link mentioned above.
-Flash it using PC odin for PDA tab.
-You will get exclamation mark and raised counter, which can be reset with Triangle Away
-First time opening triangle away application, it will ask to download file(flasher), let it complete. then choose to reset counter, it will restart in special recovery an finish job.\
If yes, then this brings us back - almost - to my original question....how do i use the custom kernel (cf or notecore) with odin? I know it uzips to a zimage etc but how do I use it which odin? Also which cf kernel -if iuse this one- is correct for my phone? Is there a link you can provide that explains all these?
Thank you!
It
This method helpful if you wr on ics, presently u r on gb so read my previous post.
Sent from my GT-N7000 using xda premium
xrimakom said:
Thank you for the quick reply!!!
Just to be sure, when you say first method you mean the one below
1. Short, easy - requires to reset counter
-Download Odin (.tar) version of custom kernel like Notecore, Speedmod, CF root kernel Or other any with same function. If newbies have confusion to select, here is one for example Notecore V12 std kernel. You can use this. But newer version can be found on link mentioned above.
-Flash it using PC odin for PDA tab.
-You will get exclamation mark and raised counter, which can be reset with Triangle Away
-First time opening triangle away application, it will ask to download file(flasher), let it complete. then choose to reset counter, it will restart in special recovery an finish job.\
If yes, then this brings us back - almost - to my original question....how do i use the custom kernel (cf or notecore) with odin? I know it uzips to a zimage etc but how do I use it which odin? Also which cf kernel -if iuse this one- is correct for my phone? Is there a link you can provide that explains all these?
Thank you!
It
Click to expand...
Click to collapse
First download a Custom ICS rom and then Flash it. After that follow the steps mentioned above.
Ketan +1 didn't read he is on GB rom....
dr.ketan said:
This method helpful if you wr on ics, presently u r on gb so read my previous post.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Ok,
I am on it now,
I will let you know about the result.
Thank you both for your time and help!
Ok I ve downloaded stock rom N7000XXLRI---4.0.4/12.07.19-N7000OXXLP8 and copied it to sd card
I downloaded the kernel from your signature and copied the zimage to the sd card
I started mobile odin and i went open file and chose the N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar and then changed the kernel to zimage i had moved to sd.
Now the phone keeps switching on and off showing (5 minutes now)
Mobileodin by chainfire
Kernel
flashing....
rooting....
system
flashing....
rooting....
moden
flashing....
rooting....
Cache
flasing.....
done
Is that what it should be happening?
How long should it take to complete the rooting?
should i have flashed zimage ith pc or mobile odin?
xrimakom said:
Ok I ve downloaded stock rom N7000XXLRI---4.0.4/12.07.19-N7000OXXLP8 and copied it to sd card
I downloaded the kernel from your signature and copied the zimage to the sd card
I started mobile odin and i went open file and chose the N7000XXLRI_N7000OXXLP8_N7000XXLRB_HOME.tar and then changed the kernel to zimage i had moved to sd.
Now the phone keeps switching on and off showing (5 minutes now)
Mobileodin by chainfire
Kernel
flashing....
rooting....
system
flashing....
rooting....
moden
flashing....
rooting....
Cache
flasing.....
done
Is that what it should be happening?
How long should it take to complete the rooting?
should i have flashed zimage ith pc or mobile odin?
Click to expand...
Click to collapse
Yea its gud to go. Now u r on ics. Just follow my previous post method and you will be done with it.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
sahilarora2003 said:
Yea its gud to go. Now u r on ics. Just follow my previous post method and you will be done with it.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
I dont think that its ok because it keeps switching on and off to that screen for about 35 mins now...
Something wrong, which version of mobile odun you are using?
Sent from my GT-N7000 using xda premium
I switched the phone off and i went to download mode and flash the phone back to stock ICS 4.04 because the mobile odin flashing was stuck ( i watched a video and the flashing wasnt the same, mine kept switching on off the phone like it was missing something)
Any ideas/suggestions about what i should do now?
Phone wotking fine now on 4.0.4?
Sent from my GT-N7000 using xda premium
dr.ketan said:
Something wrong, which version of mobile odun you are using?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
prob i ll download it again from the market and i ll report back!
dr.ketan said:
Phone wotking fine now on 4.0.4?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
it seems fine....it said something about google.something missing (i didnt read it was on the screen for a sec)...but everything else looks ok...
My phone have inside custom rom 4.0.4 (KingDdroidV8).
Since it remain blocked all time, i decide to upgrade to official 4.0.3, tryed that with ODIN and process got fail.
Not i`m stuck in this logo when i try to open custom cwm: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Pls, tell me what to do in clear steps, its very important not to misstake again (if i misstake).
Flash a stock gb rom
rajsekhar.300 said:
Flash a stock gb rom
Click to expand...
Click to collapse
Yes but how to get the the PDA, CSC?
I understand PHONE option in ODIN is the rom...
just download the gb rom from Dr ketans thread or sammobile for ur location and select the tar. md5 in the pda section on odin.
put phone in download mode and flash
Sent from my GT-N7000 using xda premium
---------- Post added at 01:25 AM ---------- Previous post was at 01:24 AM ----------
darktyroll said:
Yes but how to get the the PDA, CSC?
I understand PHONE option in ODIN is the rom...
Click to expand...
Click to collapse
just select the rom in pda section of pc odin
Sent from my GT-N7000 using xda premium
i did how you said, but odin give me FAIL, i still cant open phone.
http://oi49.tinypic.com/iygaom.jpg
Flash hydracore kernel with pc odin
If successfully flashed then try rebooting to recovery and wipe cache. And data
Here is link for hydracore
http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v5-4_STD.tar
And connect to different usb port from last time, close Kies, firewall and anti virus before flashing.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Flash hydracore kernel with pc odin
If successfully flashed then try rebooting to recovery and wipe cache. And data
Here is link for hydracore
http://hecubus.com/xda/kernel/HydraCore/GL_HYDRACORE_v5-4_STD.tar
And connect to different usb port from last time, close Kies, firewall and anti virus before flashing.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
You got my thanks and i really thank you!
What i did, i flash kernel from that link,my 4.3b wont work, either philz cwm6, hydracore 5-4 was the only one who dont make my phone rebooting at first logo.
and my pc never let me to copy any roms, everytime he disconnect. this time i succed to copy black cna 2.0 and after flashing cwm from odin, i flash cna2.0 and finnaly phone is up.
inside my internal was 2 custom ics roms, but no one boot, everytime was bootloop at first logo.
Thanks again and one more question (since nobody tell me) how i can flash roms/restore backups/etc from external sdcard? i wanna save internal and when i try zip from sdcard option, wont let me, only internal.
You should able to backup/restore to ext sd card too.
Sent from my GT-N7000 using xda premium
dr.ketan said:
You should able to backup/restore to ext sd card too.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
From the first day that i buyed my phone and installed cwm, no cwm let me to open external sdcard. All time i got this:
E:Can't open /sdcard/
darktyroll said:
From the first day that i buyed my phone and installed cwm, no cwm let me to open external sdcard. All time i got this:
E:Can't open /sdcard/
Click to expand...
Click to collapse
Do you HAVE an ext sd card? Might be damaged
Sent from my GT-N7000 using xda app-developers app
Try formating Ext SD card with mobile or with PC (FAT32)
dr.ketan said:
Try formating Ext SD card with mobile or with PC (FAT32)
Click to expand...
Click to collapse
I will format it today, but anyway in phone the ext sdcard is ok, only on cwm dont.
Ok, solved, was an issue with my sdcard :-<
darktyroll said:
My phone have inside custom rom 4.0.4 (KingDdroidV8).
Since it remain blocked all time, i decide to upgrade to official 4.0.3, tryed that with ODIN and process got fail.
Not i`m stuck in this logo when i try to open custom cwm: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Pls, tell me what to do in clear steps, its very important not to misstake again (if i misstake).
Click to expand...
Click to collapse
You have to use a custom PIT file to repartion the eMMC. And then you flash any of the Stock ICS/GB ROMs via PC Odin. You'll be good to go. :good:
Quarmzz said:
You have to use a custom PIT file to repartion the eMMC. And then you flash any of the Stock ICS/GB ROMs via PC Odin. You'll be good to go. :good:
Click to expand...
Click to collapse
BTW his porblem already sort out, but can you tell me from where i can find custom pit ? just for my knowledge.
Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2
I tried to flash stock rom via odin.
I used This Rom and This odin version and this PIT file and placed them as in the SS attached below but I got fail and I also formated to RFS with rio's multi formatter before flashing.
Why this happened?
Please tell me if I'm wrong in anything while flashing.
-deleted-
If you read carefully in SS you will find that Device removed!!!!
And ok I'll try odin 3 but where to place the rom? I doesn't have one package nor PDA???
Sent from my GT-S5570i using xda app-developers app
-also deleted-
after installing samsung usb drivers reboot your pc
Sent from my BCM21553 using Tapatalk 2
because you're using one file for it. if you downloaded 1file stock rom. and you're flashing with compatible odin for us (odin 1.84) you must split it into 3 using Odinatrix to use properly and flash stock rom to our phone. so here's where you put the three files.
PDA - PDA
PHONE- MODEM
CSC - CSC
don't forget the pit file too!
Is this guide right?
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
Flashed. done At last.
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
lol... being a noob here...
How did you do it?
cos I bricked my phone whilst fiddling with the system a bit.
Odin isn't detecting my phone...
I used this thread for the ROM and this thread for the ADB drivers. I have no idea how to install the ADB drivers...
Biso dont give him sulotion let him Invent
I will post a full giude with the egyptain rom included very soon!!!!
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
You can find the guide here