Related
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(
Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App
Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw
Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?
Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/
i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.
andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.
Evening friends i need your help lol
Right this is what happened, i made a backup of my rom then flashed cynogen mod and after a little play i didnt like it so i went to do a restore and now my phone hangs on the galaxy s screen?
I cant even get into recovery (vol up/home/power as the screen flashes at the galaxy s boot n dont do anything???
please help
Is download mode working (volume down+power+home)?
Sent from my GT-I9000 using XDA Premium App
Hi.
I am new to all this but yes download mode does work.
Im gutted and really want my phone back lol
I have just put the usb in my phone and there is a little circle icon in the middle of the screen ? (the phone is off btw) ?????
chrisvr4 said:
I have just put the usb in my phone and there is a little circle icon in the middle of the screen ? (the phone is off btw) ?????
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=991792
download and reflesh your phone , there is tutorial also
Download stock gingerbread or darky rescue center. Open odin and put all files in right place and tick repartition. Now put your phone in download mode, connect it to pc and when odin recognize it just click start.
Wait for it to boot l.
Thats all
Sent from my GT-I9000 using XDA Premium App
thanks for the replies guys but can you give me links for the stuff i need to get it sorted please.
chris.
Edit: before it all went wrong i was running stock rom 2.2.1 i believe not gingerbread as kies said no update for my device. Can i go back to stock ?
chrisvr4 said:
thanks for the replies guys but can you give me links for the stuff i need to get it sorted please.
chris.
Edit: before it all went wrong i was running stock rom 2.2.1 i believe not gingerbread as kies said no update for my device. Can i go back to stock ?
Click to expand...
Click to collapse
download this (latest GB release) :
http://dl.dropbox.com/u/19506141/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
extract files (.EXE) and put the files in right place in odin.
check repartition, put phone in dowload mode and then connect with odin.
you can root your phone with :
http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
After your phone reboots, put in download again and put the file you just dowloaded in PDA (make sure repartition is NOT checked !!)
also odin 1.3 / 1.7 and samsung drivers for PC....
http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
idiot's guide
MeBeSad said:
http://forum.xda-developers.com/showthread.php?t=991792
download and reflesh your phone , there is tutorial also
Click to expand...
Click to collapse
It's 4.20 am... I am stupid; very stupid & I am panicing about my phone and this has worked..... thank the deity/s of your choice!!!
Guys much appreciate your help
I have got kies installed and the drivers would be already there yeah? or do i delete kies and install the usb drivers posted above ?
And the gingerbread i dloaded where in odin do i put the files after extracted and what about the pit files in odin? Sorry for all the Q's but im new to all this.
Right managed to put the files in odin v1.7 but what pit files do i use as there is 3 of them?
512 pit file
Sent from my GT-I9000 using XDA Premium App
phew!! a reply at last thank you!
in odin is there anything else to be ticked? phone bootloader update, phone EFS clear? or just tick th repartion?
cheers
You must tick 4 of them. Two should be ticked when you open odin. Other two that you should tick are repartition and phone bootloader update
Sent from my GT-I9000 using XDA Premium App
chrisvr4 said:
Guys much appreciate your help
I have got kies installed and the drivers would be already there yeah? or do i delete kies and install the usb drivers posted above ?
And the gingerbread i dloaded where in odin do i put the files after extracted and what about the pit files in odin? Sorry for all the Q's but im new to all this.
Click to expand...
Click to collapse
if i where you i'd delete everything from kies....
then install usb drivers....
extraxt GB .exe file.
youll get 3 files : PDA / PHONE / CSC
put them in odin : PDA--PDA / PHONE--PHONE / CSC--CSC
get pit512 file from odin .EXE
check repartition.
phone in download and connect to odin, and pres start
themate1987 said:
You must tick 4 of them. Two should be ticked when you open odin. Other two that you should tick are repartition and phone bootloader update
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
when i open odin the 2 boxes that are ticked are AUTO-REBOOT F.RESET TIME and the unticked boxes are DUMP, PHONE EFS CLEAR, PHONE BOOTLOADER UPDATE, RE PARTITION so i tick all those yeah ?
I am not on my pc so i cant answer
Sent from my GT-I9000 using XDA Premium App
chrisvr4 said:
when i open odin the 2 boxes that are ticked are AUTO-REBOOT F.RESET TIME and the unticked boxes are DUMP, PHONE EFS CLEAR, PHONE BOOTLOADER UPDATE, RE PARTITION so i tick all those yeah ?
Click to expand...
Click to collapse
leave all checks as they are, do not check EFS clear or bootloader box or dump.
the only box you have to check is repartition
Got you right going to see if i can bring it back to life now.
Will post up my result.
Thanks very much guys
chrisvr4 said:
Got you right going to see if i can bring it back to life now.
Will post up my result.
Thanks very much guys
Click to expand...
Click to collapse
your welcome, if you have problems report here and i will help you.
im home till 14:30
Hi,
I got my samsung galaxy s gt-i9000 (in download mode) hooked up to odin (multi downloader 4.03), but whenever i try to flash a custom rom (created in romkitchen.org) it keeps saying ''check the image files !!'' i selected the 'one package' option, and i selected the rom at the bottom ''select integrate package'' section..
I'm clueless right now, please help?
Simple question are you following the how to instructions in rom kitchen .
Looks like you are not following the instructions .
Rom Kitchen + ODIN thats a new one on me .
jje
Thanks you for the quick awnser, i will try to explain the problem.
For some darkbrown reason my clockworkmod recovery doesnt work anymore, so i cant get into recovery (with 3 button combo) And on top of that my phone cant load, it stay's stuck on the galaxy s screen. (i formatted data&system in recovery this afternoon) i can only enter download mode. So i'm trying to flash a new rom onto the phone but i cant get it to work with Odin3 or with odin multidownloader. with odin3 it stays stuck on the 'setupconnection' message, and with odin multi downloader it just say's 'check image file !!'
Where can i find the 'how to' instructions on the romkitchen.org website?
Excuse me if im a noob, im just trying to get me a better phone
Berry,
I am just querying your attempt to do something that's not in the instructions as far as i am aware .
http://forum.xda-developers.com/showthread.php?t=817703
Very simple rules of flashing one backup and two if you do not understand what you are doing you brick your phone .
If you want to flash A NEW ROM YOU USE SAMFIRMWARE.COM roms and ODIN .
Custom rom via CWM
download a stock froyo rom follow instructions and flash with Odin with pit and repartition checked .
jje
Why did you format data and system??!!
Sent from my GT-I9000 using XDA App
I know :$
But i got it working again! thanks a million guys!
For future ref, check out the ezbase rom, stock rooted rom, great as a recovery image
Sent from my GT-I9000 using XDA App
Okay, i will keep that one in my mind!
I just got help from someone over @ romkitchen.org, he helped me out, now i got a romkitchen personal rom with clockwork 3.0.0.5 kernel, i'll see from here what rom ill choose.
Thanks!
Beware, u will get addicted to rom flashing!
Sent from my GT-I9000 using XDA App
today i tried remove Google maps from my tab using titanium backup. I tried install another version of maps but it didn't work so I restored backup what I did before uninstalling. I rebooted my tab and it gets past boot loco and "first" boot animation. Tab goes to Samsung loco (second boot animation) but it vibrates one time and then three times (something fc) and it freezes for few seconds and then it starts "second" boot animation again (Samsung loco). this continuous forever. I tried data wipe in stock recovery but it didn't help. Can someone help me and give me full instructions because I have never modded any Samsung device (I have Huawei u8800 witch doesn't have download mode etc.) I have only Mac so I can't use odin. I think I have no warranty because my dad got this tab from one conference in Portugal. Thanks for all who can help me.
I have rooted stock 2.2 firmware.
Sent from my U8800 using Tapatalk 2
If you are trying to go back to unrooted stock firmware, you can follow this instruction:
http://forum.xda-developers.com/showthread.php?p=19763536#post19763536
If you want safe rooted gingerbread download this gb-stock-safe on teamovercome website:
http://www.teamovercome.net/p1000/?page_id=21
Use the same set of instructiom on the first post except for the downloading part.
If you want to flash a nice and stable ROM, you can download the latest version of teamovercome ROM. Look around on the dev forum, and search for teamovercom.
Thanks, I'll try later today when I'm in home.
Sent from my U8800 using Tapatalk 2
Oh I missed what you said about having only Mac and no PC.
Please use heimdall, see this post:
Introduction on Heimdall:
http://forum.xda-developers.com/showthread.php?t=834195
Flashing P1000 ROM using Heimdall (but for windows)
http://forum.xda-developers.com/showthread.php?t=1508703
Using Heimdall on Mac (But not P1000)
http://forum.xda-developers.com/showthread.php?t=1127419
http://forum.xda-developers.com/showthread.php?t=878686
Also, since you were from froyo (2.2), if you want to upgrade to gingerbread, you have a better chance flashing gb-stock-safe from the teamovercome website.
Follow the instruction about fixing bootloader (I think you will need to find windows for this one).
Otherwise, you will need to find pit file (repartition) and dbdata.rfs because many gingerbread ROM packages (zip or rar files) do not contain pit file or dbdata.rfs in it -- I upgraded a froyo to gingerbread without fixing the bootloader before..by repartitioning with the pit file and laoding GB's dbdata.rfs but Can't guarantee it will work for yours.
I downloaded heimdall but it needs admin pass to install but I found odin for Mac
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz said:
I downloaded heimdall but it needs admin pass to install but I found odin for Mac
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
Really? Wow! Finally.
Good luck. Please post back after you successfully flash a rom.
I have another problem:
I need get my data out from internal sd because flashing will format it. Is this possible?
Sent from my U8800 using Tapatalk 2
sure, I do it all the time.
Use a file explorer.
select everything on the sdcard, copy it and paste it to a folder in external sd card.
priyana said:
sure, I do it all the time.
Use a file explorer.
select everything on the sdcard, copy it and paste it to a folder in external sd card.
Click to expand...
Click to collapse
I can't boot phone and I think data wipe disabled USB debugging.
EDIT: I can access adb in recovery but it doesn't mount sdcard.
EDIT: I'll try flashing cf-root first so I can use CWM to get my files from internal sdcard.
Oh you are trying to retrieve data from internal sd card, my bad.
Ok. Installing cf-root may solve ur problem.
I try first get data from internal sd and then unbrick tab... Odin for Mac didn't recognize device...now trying to use heimdall in virtual box.
Sent from my U8800 using Tapatalk 2
While we are at this, may I ask if anyone has their internal SD wiped during restocking to gb-stock-safe v5 using odin or heimdall?
Or when flashing any rom.
I recently use heimdall to flash the stock safe with repartition and the card isn't wiped.
Sent from my GT-P1000 using XDA
I read overcome guide and it said it will wipe all, but I think it will only wipe all if you install overcome kernel + rom.
Sent from my U8800 using Tapatalk 2
Well I restock and flash overcome kernel both using heimdall though.
Sdcards intact .
Sent from my GT-P1000 using XDA
I need USB drivers for Mac?
Sent from my U8800 using Tapatalk 2
I have no experience in Mac but I thought it should be driverless like Linux.
In Ubuntu I only need to add one line in my udev rules, and install android sdk
And when I plug in my device, and type
adb devices
It shows my serial number
Then I unpack my heimdall and I can flash.
Maybe you read a bit about installing android sdk and how to use adb with p1000 with adb in Mac.
Once ad see it, put in download mode and you can flash with heimdall.
Sent from my GT-P1000 using XDA
I have Android sdk and I have used adb on my Mac. It recognizes my tab with adb devices at least in recovery mode. I'll try flashing overcome stock gb tomorrow.
Sent from my U8800 using Tapatalk 2
I really don't know which process will wipe your internal sd, and what will be the safest way.
But I am quite sure that I have been switching kernels when I was on overcome, and it didn't touch my internal sd.
But you can try flash cf-root kernel like yappoe said,
then boot to recovery and mount the internal sd
you can then pull the files from adb.. or at least that is what I think...
Anyway, if you decide to proceed with re-stock, I did it like this:
$ heimdall flash --repartition --pit ./gt-p1000_mr.pit --factoryfs ./factoryfs.rfs --cache ./cache.rfs --dbdata ./hidden.rfs --primary-boot ./boot.bin --secondary-boot ./Sbl.bin --param ./param.lfs --kernel ./zImage
hope it helps.
priyana said:
I really don't know which process will wipe your internal sd
Click to expand...
Click to collapse
Flashing overcome rom
Sent from my U8800 using Tapatalk 2
Best of luck!
Hello
First i need a little help please.My Galaxy TAB P1000 stuck in Samsung logo.
I tried to flash first dbdata with Odin 1.7,but no luck.I tried many procedures, but still appear error message in boot menu.
Than tried to flash it with new rom GB_Stock_Safe_v5 in Odin PDA an PIN.
All people i read about the problem,they have successful flash with dbdata
Please help me to do it step by step.tnx
Do not post problem in DEVELOPMENT forum.
Sent from my GT-P1000 using xda app-developers app
yes i know,i saw later.can admin move this thread to help forum
i will try to use OVERCOME instalation guide,but i have one question.I cant paste the file to the TAB,because it is stucked in the samsung logo and computer dont recognize it as removable disc to paste overcome_4.0.0_wipe.zip
please any suggestions?
The first part of overcome need you to flash gb-stock-safe-v5 using Odin. Then you have a working tab with stock Samsung. You can figure out how to use copy file to it by then.
Second part to flash overcome kernel using Odin.
Seems to me you haven't even read the guide.....?
Sent from my GT-P1000 using xda app-developers app
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
fortyc said:
No,i read all the guide,but after flash with gb-stock-safe-v5 using Odin some voice from tab said there is not enough space on partition.So after the flash i didnt have working tab.I can access to the download mode and recovery,but still stuck on samsung logo at the beginning.
Is it possible that internal SD gone bad??
Click to expand...
Click to collapse
Didn't you first repartition by flashing the gt-p1000_mr.pit file in Odin?
I was think of the same thing.
The Pit file will partition it correctly.
Also, I don't recall the tab on GB-stock-safe-v5 talks?
Isn't overcome kernel that talks?
thak you for your replays.
I was following this overcome guide from page 7.
First use :
1.) gt-p1000_mr.pit and GB_Stock_Safe_v5.tar and JPZ Modem with modem.bin
2.) you have working tab ( but i dont have after this ) Overcome_7_Series_v4.0.0_Wipe.zip and paste it intothe tab
3.)flash the Overcome Kernel 4.0.0
etc,etc....
This is all procedure i have done with my tab
Yes the overcome kernel talks like this
If gb-stock-safe-v5 with pit didn't give you a working tab,
Yeah, likely it is a broken internal SD.
Odin message box no error?
Sent from my GT-P1000 using xda app-developers app
No error at all.Everything was going smooth with no problems in Odin.
Probably must be a broken internal SD.Worst case scenario
Is it possible to rechange internal SD?Or i should install ROM to external SD to have a working tab
CM/AOKP ROMs use different partition.
You could give it a try and see how it goes.
Do you have external SD? Just put aokp-jb latest or cm10.1 and gapps 20130301 on external SD card,
Flash overcome kernel using Odin, and once it is done, just force it power off.
Then boot to cwm recovery and flash the ROM three times, then gapps.
Watch the cwm screen for any error.
Sent from my GT-P1000 using xda app-developers app
Yes i have external microSD slot,but i have to buy a microSD card.This is the only option to have working tab.
OK,first i will make a little research about this CM/AOKP ROMs,because this is the first time doing this,but i will learn
Can I install these CM/AOKP ROMs on internal patrition,even it is broaken or into the microSD card?
Thank you for your time and replys
For CM I think there is an option.
It was in one of the thread about Damaged Internal SD.
Sent from my GT-N7100 using xda app-developers app
If GB-Stock-Safe won't work try flashing the proper stock ROM for your tab's region and following the Overcome procedure from there.
Sent from my GT-P1000 using xda app-developers app
Its very poor with ROM and updates for our region ( Slovenia ).
Fist i will restock with rom as it was original and i will try to repair it under warranty if it is possible.
Otherwise i will try any other option to make it workable
Now i arrange that my tab will be fixed under warranty.So i will downgrade it to the stock rom Froyo 2.2
Is any evidence that i tried different roms?Do i have to be careful about something?
Or i just use Odin and flash it with PIT,PDA,PHONE,CSC files and everything will be ok?do i have to change kernel either?
because i still have problem with bad internal SD.
Thak you for your help
Ps: i will use like official rom : PIT: P1.pit
PDA : P1000XWJJ7
PHONE : P1000_XXJK5_OXAJK5 (just modem.bin file )
CSC :GT-P1000-CSC-SERJJ2