Database Develop

odin failed!

Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help

Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App

Robi-K said:
Do you by any chance have locked bootloaders? Anyway as long as the computer recognizes your tab you can fix it. Just use search.
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
I dont know about bootloader, its an untouched piece. Please tell me how to fix this tab... :-(

Look at the stickyes in the gsm tab development. Just download a rom that doesn't contain bootloaders and flash it via odin. Again you can find such roms in the development section. Read read and read again and you will be able to fix your tab. One question, why did you flash your tab in the first place?
Sent from my Desire HD using XDA App

Download this firmware http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
Then goto http://forum.xda-developers.com/showthread.php?t=932082 & read the bit where it says if your tab does not boot...
Hope this helps
Mark
You need to dload the P1 hidden pit & full J4 version fw

Is it maybe because the rom you selected says cwm? Isn't that supposed to be flashed in clockwork mod?

Thanks guys for all your help, i flashed pit to my phone via ODIN and piece is alive and working now and gave the tab back to my friend. Now just need to know for the future i have ODIN v1.31 and P1_EUR.pit. I selected pit and P1000JPJJ2 on PDA. Now just need to know before flashing do i need to select repartition?

As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark

slyevo said:
As i read through the tutorial you only select repartition when you are flashing with the pit file!
If you are installing firmware, Flash the custom kernel that is linked on the same page as the overcome rom 2.13 without partition, Then hold vol up and power will put you in recovery mode, You can flash the rom through there useing the install zip from sdcard option but you must copy the custom rom onto the sd card first....
Regards
Mark
Click to expand...
Click to collapse
Well, i know how to flash custom rom, just wanted to flash the firmware through odin since it seems easier...i downloaded P1000JPJJ2 from the following site and it says no repartition, my problem solved..thanks anyway
http://www.thegalaxytabforum.com/index.php?/topic/112-samsung-galaxy-tab-firmware-list/

i have the same problem like the first post. I am using P1000 for asia (malaysia). now i can do nothing with my tab but odin still able to detect it. anyone could help forward me the link for the said rom without bootloader. the link given in the previous post already dead.

andrew21 said:
Hi, i have galaxy tab:
PDA: XWJMG
PHONE: XXJMA
Now i started ODIN 1.7 and selected p1000-mck-r3-ext4-cwm.tar in PDA. I didnt select Re-Partition and did not tick anything and did not select PIT file. Now when i connect it says 'added' and when i click on start it goes through the process and says "failed' in the end. Now my tab shows yellow triangle on it. Help
Click to expand...
Click to collapse
I had the same problem earlier and then i learned that bootloader for stock JM is signed so it show error ... completion (write) failed ... when you try to upgrade or install custom rom using Odin. I reverted back to resurrect my tab by Odin with pit (follow pit version) and check repartition, auto reboot. It works for me but not sure if it will work for others. Good luck.

think im bricked galaxy s

ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great

fliptechnologies said:
ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
Click to expand...
Click to collapse
3 combos buttons work ?
Vol down+home+power on/off ?
Vol Up + home+ power on/off ?
if yes, try to flash the correct rom for I9000M

If you can get into download mode, and Odin sees your phone, then it is very unlikely that you bricked it.
Just flash Darkys ressurection or stock Samsung ROM from Odin.

ok installed darkys, now all phone does is flash galaxy i9000 screen

managed to get past that screen and back to recovery mode, and still d/l mode, trying EZBASE now as i was getting as far as colour S then bursts of vibrations
UPDATE:
stuck on boot loop now, still can access recovery and d/k mode, after trying to install EZBase. is their any other siggestions.
pref, instructions and files for re-loading stock firmware for australia on it, if memory calls had 2.2 of eclair

still no luck people, any further advice please

I just had the same issue with my i9000m. Download the fireware I9000UGJL2.exe from http://forum.xda-developers.com/showthread.php?t=846913
It fixed my issue instantly. Then go to that kitchen rom website and create your own ROM. My phone has never been faster. GPS works very good, way better than before. Even cell service is 100000000000 times better....

ok, good news is i have it working stock rom and rooted, got most aps back on, now my issue is, i cant install clockwork recovery from rom manager, i tried it via odlin and got the screen of phone and pc and the exclamation mark. can some1 please help out as to how i can get clockwork recovery mod installed.
fone details are
galaxy S i9000I now just without the i
firmware 2.1-update1
baseband i9000xxjm4
kernal 2.6.29 [email protected] #2
build ECLAIR.xwjm8
thanks

fliptechnologies said:
i tried it via odlin and got the screen of phone and pc and the exclamation mark.
thanks
Click to expand...
Click to collapse
What did you try flashing with Odin?

electrotune1200 said:
What did you try flashing with Odin?
Click to expand...
Click to collapse
ried flashing
CF-Root-XW_XEE_JVB-v3.1-CWM3RFS

Go to D/L mode and reflash the kernal.

So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....

electrotune1200 said:
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
Click to expand...
Click to collapse
ok thanks, what should i flash then, or how can i update to 2.2 or 2.3 without loosing files and apps ?

Man you should not try to flash things when you don't understand them.
For this moment you tried to flash a kernel that is for a gingerbread rom (JVB, android 2.3.3) on your Eclair 2.1. Don't you think you should read a bit more before flashing everything on your phone?
Go to the official rom thread and follow the guides to flash a gingerbread(2.3.3) or Froyo(2.2) rom

Ok ill put this as plain and as simple as i can
1. I am new to flashing
2. I asked how to do it, as after all this is a q&a section
3. I feel my questions hvae not been answered correctley
so i shall explain again and this time links may help
1. I want a kernal that will give me recovery options
2. I do not want to loose anything on the phone
3. I want to upgrade to 2.3
so i would like links please or someone who can take the time to write a quicvk step list telling me what to do.

You really need to go to main thread and all info is there, it would take ages to talk you out of this...its all out there, seek and you shall find, its tough love
Sent from my GT-I9000 using XDA App

happened to me ea few nights ago but EZBASE rom got me out of it ,then you can flash a rom from there try it

I agree! Ezbase is a cinge!
Sent from my GT-I9000 using XDA App

/me shakes head, i sware i asked for links, i guess ill go get in trouble again and repost this in a different section.

Just use the search for ezbase 3, would you like your bottom wiped! We try to help...and what thanks??!
Sent from gt i9000 insanity 8.5/fugumod

ics

Hello im new in this forum and i just want to know if possible if there is any ics rom for I9000 to upgrade whith odin or heimdall since im not able to get the recovery menu in my galaxy

Is there a reason you cannot root your phone and install cwm?....full guide and download links to the files needed here : http://www.theandroidsoul.com/how-to-root-xwjvb-and-install-clockwork-mod-cwm-recovery/

I have tried that already i think its hard briked cod if i turn im off i cant turn im on anymore only if i flash him again
Sent from my GT-I9000 using XDA App

you may have better luck finding stock files to flash through odin, your going to want the 512 pit file and I9000UGJL2Complete (thats your PDA file) and make sure you check the re-partition box!!! let its reboot and it should be like purchasing from day one.
Put it into download mode again and then put speedmod-kernel-k13e-500hz (PDA file) in the PDA box, and only have that file present, with re-partition UNCHECKED this time. let run and when it reboots it should still work (cause its running froyo 2.2) and be the same
however now you should be able to boot into CWM recovery to flash custom rom. if you want, before flashing the speedmod kernel you can run superuser1click to install superuser.
Hope that helps!!

Ok i will try that but im not sure if it will work cos even in download mode i only have a black screen and the two lights from the soft keys
Sent from my GT-I9000 using XDA App

i found a thread discussion about similiar problem and hope there is any help to your case.
http://forum.xda-developers.com/showthread.php?t=1120880
Just read it trough and try everything out because at what point you are at there is nothing more you can do

Unbrick Samsung Galaxy Note GT-N7000

Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?

Some pretty basic reading for you: http://forum.xda-developers.com/showthread.php?t=1321268
Enjoy.

Moved To Q&A​
Please do not start question threads in the development section​

baseliner said:
Having looked at the thread regarding a similar predicament that I have (http://forum.xda-developers.com/showthread.php?t=1783556), I'm keen to know I can use ODIN to put on a new ROM. Basically these are the steps I've followed;
1. Used KIES to update my ROM from Gingerbread to ICS
2. Use ODIN to update root my phone with CM9 safe kernel (not knowing it would have been significantly better to have copied my new AOKP ICS ROM to the internal SD card first)
3. Rebooted my phone and cannot get past 'SAMSUNG GALAXY NOTE GT-N7000' logo.
4. I can still boot into download mode and use ODIN but wondered how I should use it to install a ROM as none of the ROM's I've downloaded, are in the correct .tar, md5, smd format, that OSIN is looking for ?
Click to expand...
Click to collapse
First of all, I'm not sure if this is the answer your looking for, but here is it anyway.
IN PC ODIN, there is a 'PDA' button (same button you flashed your kernel to), you need to download the ROM's zip file and flash it from there.

Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium

dr.ketan said:
Stock ROM file you download is zip, you need to extract it one time to get into .tar, then you can use that file with pda of odin.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Would these be the files needed to get my phone back up and running? I am new to Android and screwed my phone up after a factory reset, now it just reads downloading for ages and does nothing. I still get a screen that reads Hyperdroid RedPill Recovery when i power on with volume button up pressed. Volume down I get Android man and it reads downloading but does nothing.
I have looked all over for this situation but seem to get a piece here and there and not the exact same issue all in one so I am reluctant to just do something and make it worse.
Please advise

That is downloading mod, it won't do anything but remain as it is, if you don't do anything.
You need to connect you device to PC in this state and have to use odin
Read 1st line on my sign and read post#2, you will get full instruction, how to use odin.
Sent from my GT-N7000 using xda premium

[Q] bricked N7000. how to get working again

I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?

sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.

I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?

sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app

same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated

i have the same problem

conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app

fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into

conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.

Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?

sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app

Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?

sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run

Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.

sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..

Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...

sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.