Soft Bricked GT-P6200 made in vietnam - Galaxy Tab Q&A, Help & Troubleshooting

Help please i soft bricked Gt-P6200 tab i dont know what to do and where to find stock rom for my tab please
i found a solution of my own its now working again but thanks anyways

Format ur tab using recovery mode and install slim rom. Or go to samsung service centre pay 500 ₹ and get the tab repared.
Sent from my SM-J500F using XDA Forums

hi , i had got an emmc brick with ics stock recovery , i had use hg42 script with cwm and his patched pit , it's bootup stock jb and succes to install kk custom rom (slim/aosb/omni) but i have got this error in cwm log
Can't partition non mmcblk device /devices/platform/s3c-sdhci.2/mmc_host/mmc1
pls what does it mean or any suggestions !!!, i'm worry about losin much memories with flashing patched pit with odin

Related

[Q] galaxy note bricked after installing Rocket ICS v3

hi , I had installed the ICS Stock Germany, and this morning I went to install the Rocket Rom ICS v3 but my note is not restarted more, then i flash the ICS Stock whith Odin Pc, since then my note is not restarted more, gets stuck on the screen of samsung , I have done several downgrades and upgrade ins roms Stock and Custom,it comes in so Download mode and Recovery,but when I go to a Full Wipe it crashes and restarts, please help me
Have you tried downgrading to a stock GB ROM with Odin and doing a wipe in recovery while on GB rom ?
Dont do data wipr on stock rooted roms
Hey , did you do full wipe on ICS stock LPY ( German release ) Rom ?????? Hope you have not . Haven't you read that most of the stock ICS roms have emmc cap bug ?? it will super brick your phone ! . Download stock Gingerbread KL3 firmware and flash it using PC Odin . But before that, flash the pit file based on whether your phone is 32 GB or 16 GB , and then flash KL3 . You might be doing good after this . If not and if you have done data wipe on LPY then the only way to fix this ( till now !) is to edit data partitions of your phone using adb tools found with android sdk , or get your motherboard replaced or whatever the Samsung Service Centre asks you to do . Good luck with the first step ! Hope that you ll be successful at first step
If you need any help feel free to ask , will help as much as possible.
I have included 16GB pit file , flash it through PDA slot in PC odin
I tried
Archangel919 said:
Hey , did you do full wipe on ICS stock LPY ( German release ) Rom ?????? Hope you have not . Haven't you read that most of the stock ICS roms have emmc cap bug ?? it will super brick your phone ! . Download stock Gingerbread KL3 firmware and flash it using PC Odin . But before that, flash the pit file based on whether your phone is 32 GB or 16 GB , and then flash KL3 . You might be doing good after this . If not and if you have done data wipe on LPY then the only way to fix this ( till now !) is to edit data partitions of your phone using adb tools found with android sdk , or get your motherboard replaced or whatever the Samsung Service Centre asks you to do . Good luck with the first step ! Hope that you ll be successful at first step
If you need any help feel free to ask , will help as much as possible.
I have included 16GB pit file , flash it through PDA slot in PC odin
Click to expand...
Click to collapse
my note is n7000 16GB, i tried flash de GB Stock + pif whit odin but still the same problem,do not pass the screen of samsung :C
totiuson said:
my note is n7000 16GB, i tried flash de GB Stock + pif whit odin but still the same problem,do not pass the screen of samsung :C
Click to expand...
Click to collapse
Check Rocket Rom or Dr Ketan threads - best to flashback to Abyss 3.9 or 4.2 then reboot into recovery and factory reset before flashing RR3 or later. I've done this twice and it worked both times.
damn now im chickening out guys i need to know something...im on cm9 so i assume its safe to flash ics stock directly since its a safe kernel?now how do i go on about it?enter cwm mode wipe everything,download latest ICS flash with pc odin then root it?
also how do i recover my backed up data with TB?since i dont have an external SD yet
I am not sure what do u mean by samsung screen...is it the boot animation or the samsung galaxy note screen GT N7000 screen??? I flashed the criskelo's rom and I got stuck in boot animation....I was able to go to cwm recovery and download mode..but I was not able to flash anything via cwm...not even abyss kernel....I never used download mode on note yet...so I was trying to fix it without using pc....gladly I had an old version of franco kernel....which I was able to flash and then I rebooted into recovery and flashed abyss kernel...and back to checkrom...and now on aokp....
Sent from my GT-N7000 using xda premium

[Q] Galaxy Note stuck on the "GNT7000" logo

I had ICS 4.0.3 installed before which was rooted using CWM and then I decided to install CM9 nighlty after installing the CM9 Rom through CWM i rebooted my phone and it got stuck on the "samsung galaxy note gt n7000" logo.
Ive tried installing many stock roms using ODIN and all of them are stuck on the same thing (2.3.5, 2.3.6, 4.0.3)
I can boot into download mode and recovery mode but in recovery mode my phone gets stuck if i select wipe/data option.
Please help.
You should flash the cm9 from gb not ics. There is a warning there that it must be flash from gb.
sorry but you have brick your phone next time follow the developer instructions before flashing theres a thread on how to revive your phone around search it here in xda
Sent from my Galaxy Note N7000 litening rom note 2.0 speedmod k3-3
xda-premium
Thanxgood: for the Info guys, but I gave my phone to the service center. thought ill just be worsening the condition of my phone.
Will update you with the procedure the service center people took to repair the phone.
Lol,
Next time flash gb with pit file, then from recovery do factory and cache wipe. Reboot
Sent from my GT-N7000 using Tapatalk 2
I had flashed my phone using the 16GB pit file with re-partitioning checked, but that too didn't work. Just waiting for the service guys to fix it. :fingers-crossed:
Sorry you've run into troubles. Can you let us know if you get the phone back OK?
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!
Gaurav29 said:
I had flashed my phone using the 16GB pit file with re-partitioning checked, but that too didn't work. Just waiting for the service guys to fix it. :fingers-crossed:
Click to expand...
Click to collapse
dude did they fix your note? beacause i already went to service center waiting for my note...
Hi guys just got my phone back from the service center, its working now:laugh:. They replaced the motherboard of my phone and also the binary counter is zero now.
Please suggest me the best way to install CM9 as the stock ICS is not at all good.
and is there a way to get the SNOTE applications on the custom ROM?
follow the isntructions i nthe roms first post and you cant go wrong
no snote only works with touchwiz not cm9/aosp
Make sure you flash stock gb first with pc odin, don't flash anything else from ics, you'll brick for certain.
Then you need to root and cwm and perform full wipe under gb before flashing cm9.
There are various snote alternatives in the play store which I'm sure others will be able to advise you of, but no toucwizz Samsung apps will run under cm rom.
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!
Thanks guys. I am running CM9 Nightly on my phone without any hassle.
Sent from my GT-N7000 using xda app-developers app

[Q] my phone has emmc bug but all of method doesnt work on it!!!

hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
i tried all but doesnt work
SpyderTracks said:
You'll lose up to 3gb of space and stock roms will probably not work anymore without fc's. Cm based roms usually work best after emmc brick revival.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
yes i know that but the problem is this i use all of this method but i cant revival my phone cuz i cant access to recovery and when i turn on my phone i infront with a message that show a triangle between a pc and a phone and says use kiess. i use pit method without accesing to recovery cuz of this i flash all of pit files one by one but doesn't get any way to revival my phone.
screenshot of my phone
lionelia said:
Should try this http://forum.xda-developers.com/showthread.php?t=1667886
You'll have to identify the bad partition and then manualy rebuild the partition table with ADB.
Click to expand...
Click to collapse
i attached screenshot of my phone . i couldnt access to recovery .
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
pit files couldnt set
SpyderTracks said:
After flashing pit file did you try and flash a kernel like Phillz?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks . actually not . cuz none of pit file couldnt set on my partition and stuck in odin.can i flash this kernel without flash pit?
new problem
now i have a bigger probem .my battery is out of charge and when i plug in phone to adapter it start bootllop and i cant enter in download mode cuz of low battery
help me plz
help me for 1 month im working on my phone :silly::silly::silly::crying::crying::crying:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Buy an external battery charger. They are very cheap
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
My phone was bricked.
And I use hg42 revival method.
Simply go into download mode.
Use odin pc to flash stock rom (gingerbread preferred).
And....
Choose the pit from hg42, tick repartition.
Flash.
Voila. It is up alrd with a lost of 3gb. But I didn't care since I have ext sd.
PS:
It will be good if u know how to identify the bad block first. So u can choose the correct pit file to do repartition of ur device.
And.... u better charge ur battery first, no matter how r u goin to do it. I m sure u don't want to get worst while flash with odin pc, and ur battery dead.
^_^
Sent from N7105, at the corner of this rounded earth.
king-heart said:
hi everybody
i have a big problem . for more than of one month i am working on my phone but i couldn't solve the problem,. my galaxy note was stuck on galaxy note logo . my previous Rom was 4.0.4 and i downloaded new 4.0.4 Rom but i couldn't flash it with Odin . it stuck on factory, i downloaded gingerbread stock Rom but was the same , after looking for solution on xda i found that has emmc bug . i couldn't access to recovery after flash gingerbread rom but i flash all of pit files that was on the emmc bug thread but none of them worked.but now i have bigger problem now is a tiangle between a pc and a mobile. how can i solve the problem? please help .
( i add this that i live in iran and we dont have a formal representative in Iran.):crying::crying:
Click to expand...
Click to collapse
Check md5 sum of downloaded file...
I think it's the download of the file.
than try this-http://forum.xda-developers.com/showthread.php?t=1667886
After that try to flash PhilZ kernel (look for .tar file in Philz thread and flash via ODIN-i don't preffer ODIN but since u got nothing else u have to flash via ODIN PhilZ kernel) and some custom TW JB ROM from CWM that comes with PhilZ kernel.
So everything should be working or?
nokiamodeln91 said:
Remove the battery. Put back. Then plug the charger and let the phone charge for a couple of hours before you boot into download mode again?
Click to expand...
Click to collapse
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
king-heart said:
Thank u i solve battery problem by changing with my friends but other problem . I couldnt install recovery to solve with pit fils
Click to expand...
Click to collapse
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
You just need download mode to flash pit file. Then once complete flash Phillz kernel.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
king-heart said:
I flash all of patched pit file but doesnt work i flash more than 100 pit file.
Click to expand...
Click to collapse
You have to do it manualy with your brain and your hands.
With ADB you can check each partitions to find the one faultly and then create new one.
you will loose space on mass storage (UMS partition) but your phone will work.
So are you still on stock recovery? After flashing PIT you need to format emmc, data, cache and system before flashing new ROM with Odin. You need custom kernel for that.
Also, did you do factory reset with CWM.zip before you bricked?
Sent from my GT-N7000 using xda app-developers app
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
sepehrthegreat-iran said:
Ah!why are people using odin when flashing from phone is so easy???!!!i did not use odin.now i have philz kernel and ultimate jb rom v5.1
And i also live in iran!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
its because he has bricked the phone and no access to recovery currently. also Odin (PC/Mobile) is the only way to get back a stock official rom

[Q] Help: Galaxy S Advance - Softbrick Recovery

Hi, Im new here, Im trying to upgrade my Galaxy S Advance GT-I9070 from 2.3.6 GB to JB using ODIN, I accidentally downloaded the .tar file for Galaxy S2 GT-I9100, upgrade failed, now my phone is soft bricked, Kies cant recognize my phone for recovery, I read some tutorials to unbrick it using ODIN, cant find the right path/file to do it.
heres what I see in after pressing Vol Down/HOME/Power:
ODIN MODE
Product Name: GT-I9070
Custom Binary Download: No
Current Binary: Samsung Official
what files I need to download to restore it back to GB then upgrade to JB? Thanks in advance!
Problem Solved: I downloaded "I9070DXAMD1_I9070OLBAME1_HOME.TAR.md5" and install it, it worked!
Mods Pls close, thanks XDA!
You was lucky, it could be hardbrick. Never flash other phones firmware.

[need help] galaxy note brick,custom binary count

hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
mohd syafik said:
hello guys, i need your help.. i have samsung galaxy note N7000 brick phone because stuck on galaxy note gt-n7000 screen. i can access download mode and no recovery. i flashed any firmware version it stuck at factoryfs.img.. i flash any kernel it says fail, i flashed pit file stuck at set partition. what should i do?? every time i flash custom binary download will count.. what should i do? please someone kindly tell me the guide to solve this problem.. :crying::crying:
Click to expand...
Click to collapse
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
NoteboyTech said:
Try a Gingerbread firmware and the firmware should contain all the three files seperate. Like the code modem and pda.. and then flash it.. it will help
Hit Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
i have try GB firmware that contains all files the result still same.. i don't know what to do
hazwan708 said:
1) What Firmware Did You Use When This Problems Coming?Is It Stock ICS?
2)Please Give More Details About Firmware You Use...
Click to expand...
Click to collapse
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
mohd syafik said:
i use firmware JB XME from malaysia and GB firmware that contains all files pda,csc and modem still stuck at factoryfs.img..
i flash pit file 16GB stuck at set partition, i flash any safe kernel,odin shows fail...:crying::crying:
Click to expand...
Click to collapse
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
ThaiDai said:
If you stuck at factoryfs.img then you device is bricked.
Replace the motherboard
or
try the workaround (and it is only that) with the repartition method described in hg42's thread.
Click to expand...
Click to collapse
still same.. i flash pit file from hg42 thread stuck on set partition..
here i attaches the image
How will it move ahead? You have not selected any PDA files to flash.
And why did you flash that PIT file? Have you done any scans using the scanners found in that thread to determine the bad blocks?
ENter all the 3 files without PIT! and tell again!

Categories

Resources