Database Develop

[Q] I9000 stucked on logo after update 2.2 froyo

Hi guys,
After foolowing all of the post about updating i9000 with froyo 2.2 i decided to try it but i have problem..
I have made JIG to enter in download mode because 3 button combo didnt work..
I have sucessfully flashed it via ODIN 1.7 and wiped data and cernel but my phone stucked on Galaxy S logo and vibrates from time to time..
Is there any solution?
BR,

i have solved by flashing with firmware I9000XFJP7

ummm.... for curiosity purposes how did u manage to solve it?

[Q] My phone does not turn on - please help !!!

Hi guys, I was upgrading my galaxy i9000 to Froyo 2.2 when suddently the phone turn off. Now it does not turn on. I tried to access to the recovery mode, but it does not work. The only way it starts is in donwloading mode. What can I do ??? ... Please help me !!....

Do you know how to use odin? If so, try flashing jh2 from samfirmware.com. Depending on the cause if your problem, you'll either recover or will be sol
Good luck

Thank you so much !!! It worked !!!!!

[Q] [Help needed] Constant Reboot,SGS

Hi there XDAdevlopers,
I installed the Custom ROM Galaxian on my SGS i9000 2.1 update 1 ECLAIR
I ran into a litle problem, when it started rebooting, it just kept on rebooting.
I can't access the Recovery Menu nor the Download state.
The phone wont even completely start.
My specs: SGS I9000 8GB Vodafone NL 2.1 Update-1 ECLAIR
P.S. I don't ahve enough post to post this problem in the Galaxian Thread so I posted it here

- galaxian is not custom rom it is a kernel and i think it is unsafe to flash it on eclair
- youve got a bootloop because of flashing 2.3.4 kernel on 2.2.1 one
- you always can acces them just press volume down+menu+power during bootloop and hold it untill you will see the yellow triangle sign with 'working android'
proceed with
[GUIDE] Flash/Install/Update to Gingerbread 2.3.4 to I9000: Detailed guide for n00bs

if that doesnt work mate then try this
http://forum.xda-developers.com/showthread.php?t=1236273
Good Luck

If you can't get into dl or recovery mode, then you may need to bite the bullet and get a cheap SGS "download mode jigs" on eBay. That's a sure way to get into download mode each and every time.
The only thing in question is if your internal SD died, but really the only way to truly find out is to flash back with a stock ROM...
Sent from my MB860 using xda premium

$omator said:
- galaxian is not custom rom it is a kernel and i think it is unsafe to flash it on eclair
- youve got a bootloop because of flashing 2.3.4 kernel on 2.2.1 one
- you always can acces them just press volume down+menu+power during bootloop and hold it untill you will see the yellow triangle sign with 'working android'
proceed with
[GUIDE] Flash/Install/Update to Gingerbread 2.3.4 to I9000: Detailed guide for n00bs
Click to expand...
Click to collapse
I'll be trying that method right now,
I geuss I did something wrong with pressing the button to acces DL mode, thnx for that, it works now.
EDIT: YES!! it works great!
Thank you very very very much!
Don't worry, I also pushed the Thanks button.
Regards,
Frans

[Q] Help... SGS i9000 can't turn on after unbrickable mod and successful flash

Dear all,
Hope this is the right location and if not please move... thanks!
A brief history on my problem: I had a Canadian Bell ( SGS Vibrant ) I9000M and recently rooted and unlocked for an oversea trip. It was on the stock Gingerbread from Bell and everything works fine and after I'm back in the middle of the day the phone starts rebooting to the 'S' animation ( bootloop? ). Then, I tried to reflash it with other stock roms but no luck.
Then, during one flash my USB port failed on me and bricked. I decided to flash with primary and secondary bootloader and the phone no longer to display anything after power on.
After following AdamOutler's thread on the hardware unbrickable mod now can go back to Download Mode. I was so glad to see things back so I immediately flash it with Heimdall one-click ( with XXJVT rom ). However, everything went smooth, except when everything ( incl primary and secondary bootloaders ) are loaded it still doesn't turn on. I tried many times with same result.
Anyone can shed some light on this? Thanks!!!!!

[Q] SG i9000T Bricked!

Hi i have this i9000T from Ancel, i dont know what happend to him.
Phone can enter kernel, can flash any kernel, can enter download mode, but when i turn on normally after samsung i9000t screen boot logo, restarts continously, i tray serveral times with all kind of firmwares even the original, i try flashing the sbl and then a rom, but still the same.
Can someone help me?
GT-I9000JW5_JW1_JW4_FOP_SPAIN
I9000TDVJW1_TELJW1_Australia_Telstra_Android_2.3.6
I9000XWJW6_I9000DBTJW2_DBT
I9000TUBJPD (Ancel rom)
I try with this and same result anytime.

Try UnBrickable Mod ,you don`t need hardware modifications because you can enter Downloading mode, find it in development thread.

But i dont need that, coz my phone is ok, only firmware problem i think, bootloader is ok, can enter or install kernel, wipe, etc
Can flash with odin

flash back to stock or cm10 and takes things from there