I can't see my device in DDMS Perspective view in Eclipse.
I turned on the usb debugging mode and installed kies drivers on the computer, still doesn't work.
what can be the problem?
Solved! Used this Guide
This works, thanks.
Related
Samsung Galaxy Tab USB Debugging not working right
Not Able Connect P1000 to PC with USB Debugging ON
Connects prefect without USB Debugging active, Move files backs and forwards no problems, Need Some Sorter extra drivers or Something.
Can't use Z4root or SuperOneClick until I sort it out
Neither work at present
Same On two P1000s, SuperOneClick worked on one but that was just got lucky after trying 25 times, other one couldn't get lucky tried all sorts of ideas I could think of, need some fresh ideas.
Any Ideas?
Well,
U need to have Usb debugging turned on. Then u also need working drivers. U can find the drivers in the restockpackage on the overcome site.
Remember u can also just use adbwireless and connect via localip!
I am facing issue in enabling the USB debugging in i9000.
Selected the USB debugging in settings of android. When i connect the phone to PC, USB debugging is not displayed in the notifications of the phone.
Please let me know how to enable the USB debugging in i9000?
Apart form Selected the USB debugging in settings of android what else should i do? Should i install any software in PC for USB debugging to work?
ROM: Official Value pack. Version 2.3.6
Hello,
you should install drivers for your phone ( look for on internet)
So I am trying to unlock this Captivate and I Enabled the USB Debugging option when it's plugged into the computer. Problem is, when I actually connect it to the computer, the device doesn't go into USB debugging mode. Any help on this would be appreciated!
onlymojo said:
So I am trying to unlock this Captivate and I Enabled the USB Debugging option when it's plugged into the computer. Problem is, when I actually connect it to the computer, the device doesn't go into USB debugging mode. Any help on this would be appreciated!
Click to expand...
Click to collapse
JB CM10 can't use USB debugging with Sideload Wonder Machine
onlymojo said:
So I am trying to unlock this Captivate and I Enabled the USB Debugging option when it's plugged into the computer. Problem is, when I actually connect it to the computer, the device doesn't go into USB debugging mode. Any help on this would be appreciated!
Click to expand...
Click to collapse
I had this problem few times. I had to pull the battery out and restart the phone. Doesn't hurt in trying this.
has anyone came up with a solution?
Hey, I'm pretty new here and just been absorbing a lot of information since I got an htc one recently. I decided to flash the ARHD rom and everything work perfectly fine except the usb debugging mode isn't working properly. I've activated the dev mode and checked the usb debug mode box and connected it to my computer and its only showing me; USB connected and MTP mode. Before it would show up... I checked using cmd with the fastboot device command and its not detecting the device but i can go into my internal storage. I also uninstalled the drivers and re installed them, no luck. Any help?
What version of windows are you running?
Check with adb devices command, not fastboot. It should pop up a security message on your device, so keep a look there as well.
Running windows 7. Alright will try that. Thank you!
Hi I tried to boot into download mode to install recovery (phone says "Downloading...") but when I connect it my phone to pc, windows says that device is not recognized and odin doesn't detect it too. I tried to remove and install drivers again, change usb port, usb cable, reboot pc, try another pc (both on windows 8.1) and clean usb port on phone. Mass storage and adb throught usb works well.
Do you have any ideas how to make it working? Or somehow flash recovery/CM without download mode?
nope. Doesn't work!
Corn Flake said:
Hi I tried to boot into download mode to install recovery (phone says "Downloading...") but when I connect it my phone to pc, windows says that device is not recognized and odin doesn't detect it too. I tried to remove and install drivers again, change usb port, usb cable, reboot pc, try another pc (both on windows 8.1) and clean usb port on phone. Mass storage and adb throught usb works well.
Do you have any ideas how to make it working? Or somehow flash recovery/CM without download mode?
Click to expand...
Click to collapse
I had the same problem. :good:
windows recognizes. But 8.1 doesn't. :crying: You have to down-grade.
A suggestion, have a separate OS for these works and "gaming" xD say 7?
It works great!
Ok, thanks guys, I will try to find another pc with w7 or xp.