Related
Hi everyone- I think I broke my phone, but any suggestions would be appreciated. I had cog3 and wanted to upgrade to cog4. I started by disabling voodoo lagfix, but it hung up there for about an hour. I powdered down and now nothing works. I see a screen with a phone and computer and an exclamation poit. I am able to get to d/l mode, but odin doesn't recognize it. Tried reinstalling usb drivers, but windows thin ks im plugging in a gadget serial, whatever that is. Not sure where to go from here. Thanks again for any help
Make sure you have usb debugging enabled.
Menu> Settings> Applications> Development> USB Debugging
Connect phone to computer and hit usb connect. Android shouls turn from green to orange.
Sent from my SAMSUNG-SGH-I897 using XDA App
usb debugging
I can't turn the phone on to do that. I can't believe I forgot to turn usb debugging on before I started! Is there a way to turn it on without being able to turn the phone on?
Might want to try a couple of other USB ports on the computer. I know that it does not see my phone unless I plug it into a port on the back of the computer.
Tried different usb ports, even different computers, no luck. I failed to mention that I used an i9000 kernel. Do I need the i9000usb drivers?
Just an update : had to uninstall mini kies, reinstall, load the drivers per the ofgicial froyo upgrade instructions, then odin finally saw the phone and I was able to flash back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
[email protected] said:
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
Click to expand...
Click to collapse
Can odin detects your tab? Another note is, is kies with the latest version?
fastcx said:
Can odin detects your tab? Another note is, is kies with the latest version?
Click to expand...
Click to collapse
Hi fastcx,
ODIN can't detect my GT, and I think I have the latest Kies which is version 2.0.0.11014_49.
Purchase in Riyadh
Some info of my gtab
PDA: P1000JPJK2
PHONE: P1000JXJK2
CSC: P1000JPJK1
Personalization Status
--------------------------------
Network Lock: Off
Networj Subset Lock: Off
SP Lock: Off
CP Lock: Off
Guys need your help regarding my problem.
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Same issue with Kies not detecting SGT
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
dxwilliams40 said:
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
Click to expand...
Click to collapse
Hi dxwilliams40,
What Samsung New PC Studio version you have?
Can you give me the url where you get this software?
Also, can you give me the procedure on how you get the driver using this Samsung New PC Studio?
TIA.
DarkPal said:
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Click to expand...
Click to collapse
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
[email protected] said:
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
Click to expand...
Click to collapse
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
fastcx said:
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
Click to expand...
Click to collapse
Yes, it goes to recharge mode, this is the only thing I can only use between my gt and my computer is to recharge.
To all XDA member's who have this problem before and solve it, please share it to me, I can't move from here I have a good device but I can't maximize the use of it.
Regards to all,
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
DarkPal said:
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
Click to expand...
Click to collapse
Hi DarkPal,
I do 1 by 1 your advice but in the ended it's still the same, I installed MTP from your link but my PC can't detect my GT.
I attached my GT from our 2 laptops both Win7 but they can't detect also my GT.
Hope you have more plan
TIA
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If uave the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device). Reinstall kies USB driver. Disconnect tab and reconnect.
Few important notes:
Connect tab directly to the pc not via usb hub or similar apparatus (tab takes power from pc as well as data).
Update your windows media player to latest version (i know its bloated and hogs system resources but it has latest mtp repositories).
Always execute command as an adminstrator. Whether launching or installing.
I had the same problem long time ago. I solved changing the USB port. Befor I used the front case one...the I switch the port in one of the back case and it was working without any issue. Try this. I hope it help!
DarkPal said:
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If u have the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device).
Click to expand...
Click to collapse
Hi Again;
Debugging mode is off when I tested all your instruction on my sgt.
I uninstall Kies restart, download from samsung Kies 2.0.0.11014_49 and install it again, restart, test sgt fail again.
Win7 detect my sgt when you put on usb.
My sgt can recharge on my win7.
iPhone 3gs, iPhone 4, Blackberry 9780, iPad Wifi+3g all working with the same usb I use for sgt.
I hope you still have option that we can test
it look like you having problem with the data cable..... do you have another cable to try!
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
DarkPal said:
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
Click to expand...
Click to collapse
" USB Device Not Recognized " error occur when you put sgt on my computer.
And the removal of USB cable doesn't work also.
This is the original cable came from sgt box, it's new like 3 months only, anyway I will try to buy another cable and I hope this will work.
But anything you want me to try much appreciated, dunno where I can find original sgt cable, specially you mention buying online we don't know if genuine from samsung.
tnx man.
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
DarkPal said:
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
Click to expand...
Click to collapse
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
[email protected] said:
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
Click to expand...
Click to collapse
Still not giving up on you my friend. Try to put the tab in download mode (power and vol rocker down). Reboot computer and in device manager uninstall it. Disconnect the cable and reconnect it.
I have a final solution for you it involves installing heimdal usb drivers to your computer
I was able to use adb on my Windows 7 x64 Home edition prior to rooting
After using z4root to root my Galaxy S - I9000 running Froyo
no matter what i tried , i was always unsuccessful
I unrooted using z4root and tried it but it didnt work..
Rooted it again didnt work
Thought may be to delete the device in device manager and then reinstall it using the drivers provided by Android sdk and NOT the windows update one...
Followed many others steps by various blogs and i know i am not doing it incorrectly but still it doesnt work...
I have tried to put everything in an image ,an expert mite need to understand my problem
If you are not able to see the image properly try this:
imageshack.us/photo/my-images/856/galaxysu.jpg/
Did you make sure that in your SGS, Settings/Applications/Development the USB debugging mode is ticked?
Have you tried to reinstall Kies (to install / reinstall necessary drivers)?
stiwipl said:
Did you make sure that in your SGS, Settings/Applications/Development the USB debugging mode is ticked?
Have you tried to reinstall Kies (to install / reinstall necessary drivers)?
Click to expand...
Click to collapse
What i did was deleted everything under Universal Serial Bus Controllers, uninstalled Kies and drivers of Samsung and restarted my box. and installed Kies again, set usb debugging again and connected it and Voila ! It works flawlessly now
Thanks a lot for your advice. Was getting mad after following so many posts on the internet. Finally everything is working fine now...
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Today I tried to connect via USB to transfer a new book I'd downloaded, and Windows didn't recognize the device. Has the error USB Device not recognized.
It shows on the device in the status area that MTP is installed, and it says on the device that USB is connected.
Tried everything. I have the latest version of Kies, uninstalled and re-installed. Deleted the device, let windows re-install it. The tablet charges fine via the same cable. I've tried different USB ports.
My Samsung Galaxy S2 Skyrocket connects on the same computer, seen by Kies, can transfer USB. Works on the same USB port!
And of course I have USB debugging turned on.
Any thoughts. I am certain it was due to the change of ROM.
Bump........
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
harry_fine said:
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Click to expand...
Click to collapse
Are you sure you are in correct forum? I have never heard about UCLA modem or 2.3.6 ROM for GT8.9
Latest modem we have is KJ6 and Android version should be 3.2
Sorry, I was confusing this with my Galaxy S2 Skyrocket.
This is 2.6.36.3 kernel, Android 3.2, which I think is the latest official stock for the Tab. I think I used P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5 for the upgrade.
Didn't work, same problem. Anyone else?
Tried a solution I found online, found some very long file extensions on the SDCARD, removed them, rebooted phone, and now no problem connected as a drive using MTP, and installing driver.
so what's the solution??
lastiko said:
so what's the solution??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31929746&postcount=236
Simply install the drivers, reboot the PC, then connect the device.
subtil123 said:
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
Click to expand...
Click to collapse
it really works out.......thank you :good:
i have a galaxy note 10.1 and it didnt recognize not even the Adapter Cable.....
I have Samsung P7300
just want to root it, but my PC does not even recognize it. not even Kies..
done all the things searching on XDA and other sites, but still the same Problem,
I cant even find the MTP thing under USB Storage.
I can Connect my Samsung galaxy S Plus i9001 to it.
i have installed/uninstalled Drivers, and kies many times.
My problem is why there is NO MTP Option in this device, it is not even rooted.
.
I'm trying to root my friend's Rogers Captivate i896 using Odin but can't get the computer to recognize the device. I tried installing the drivers mentioned throughout other threads. I've tried uninstalling Keis, uninstalling the drivers, connecting to different USB ports, tried several computers/laptops running XP & Win7, tried USB desbugging on/off, tried "mass storage/kies firmware update/ask when connected."
He got the phone with Eclair and when it became available he then updated to Froyo through Keis. Ever since that update he hasn't been able to get any computer to recognize the phone. When I root my sgs i9000 I did have an issue with "mtp application error" that ended up being a missing driver but with this i896 model I've tried several different drivers and still nothing.
I can't root if the Odin can't 'see' it, or is there another way? Any others out there that have had success? Any help is much appreciated.
First of all, you don't use Odin to root it. Odin won't see it when the phone is on; only in download mode. You will just need SuperOneClick in order to root.
It is also unclear whether you are trying to say that Windows won't recognize it, or just Odin
Sent from my ICS Samsung Captivate
Windows in general won't recognize it. Even when I connect it to a mac, I hit the 'connect storage to pc" and it says it's connected but the internal/external hd do not mount. I used odin to root and put a rom (darky10.2) on my sgsi9000 and used the same instructions because the same steps also work for the captivate. I thought I read somewhere that I use Odin to go from Froyo to Gingerbread?
I'll looking at a SuperOneClick youtube vid & it says to connect the device to the pc & run superOneClick on the pc but how will that work if the issue is that the pc's can't detect the phone in the first place? btw thanks for the help.
retrolab said:
Windows in general won't recognize it. Even when I connect it to a mac, I hit the 'connect storage to pc" and it says it's connected but the internal/external hd do not mount. I used odin to root and put a rom (darky10.2) on my sgsi9000 and used the same instructions because the same steps also work for the captivate. I thought I read somewhere that I use Odin to go from Froyo to Gingerbread?
I'll looking at a SuperOneClick youtube vid & it says to connect the device to the pc & run superOneClick on the pc but how will that work if the issue is that the pc's can't detect the phone in the first place? btw thanks for the help.
Click to expand...
Click to collapse
Sure, you can use Odin/Heimdall to flash any stock firmware, but it's not going to help you if the phone can't be recognized. It sounds like something is physically malfunctioning. Are you using the USB cable that came with the phone? I suspect that either the cable or USB port is malfunctioning.
I thought the same thing but I am using the cable that came with the phone and I tried different ports. I also tried different laptops running different versions of windows. So strange. Ah well thanks for the help.
I had a similar problem with my captivate before I changed the ROM, but only on one particularly stubborn computer. I ended up having to go through this process to get my phone to connect:
- Uninstall the USB driver
- Reboot computer
- Connect phone with debugging off
- Install USB driver
- Reboot computer
- Connect phone with debugging on.
After that, it worked just fine in whatever mode I wanted.
You may have already tried that process, but if not I hope it helps.