I have Semc sim free phone.
when i use the msm7227_semc, it opens the console and when i press the buttons it wirtes:
"
press any key to continue...
Getting Root Rights.
1157 Kb/s (585731 bytes in 0.949s)
- exec '/system/bin/sh' failed: no such file or directory(2)-
- exec '/system/bin/sh' failed: no such file or directory(2)-
Waiting...
"
and so on on everything else it's trying to write.
I'm using GingerDX v.013.
what do to??
moseschrist said:
I have Semc sim free phone.
when i use the msm7227_semc, it opens the console and when i press the buttons it wirtes:
"
press any key to continue...
Getting Root Rights.
1157 Kb/s (585731 bytes in 0.949s)
- exec '/system/bin/sh' failed: no such file or directory(2)-
- exec '/system/bin/sh' failed: no such file or directory(2)-
Waiting...
"
and so on on everything else it's trying to write.
I'm using GingerDX v.013.
what do to??
Click to expand...
Click to collapse
Visit this guide first post step 7 to see if you have bootloader successfully unlocked: http://forum.xda-developers.com/showthread.php?t=1254225
If not, disable antivirus and try unlocking your phone's bootloader again.
Remember that you have to use a rooted phone and that you must have phone dricers already installed.
Related
I was on v8 non-rooted.
I followed the instructions here to the letter:
http://forum.xda-developers.com/showthread.php?t=1566729&page=4
didn't have any issues at all, no errors.
I'm confirmed on V8 and do have root but can't access CWM. Attempting to run the new AIO again gives the following:
Root and Recovery for ZV8
Press any key to continue . . .
* daemon not running. starting it now *
* daemon started successfully *
Device found
Mounting Device
remount failed: Operation not permitted
Pushing Root Permissions
Unable to chmod /system/bin/su: Read-only file system
7781 KB/s (5345280 bytes in 0.670s)
Unable to chmod /system/xbin/busybox: Read-only file system
Installing CWM Recovery
/dev/block/mmcblk0p14: cannot open for write: Permission denied
Remove Trash
rm failed for /system/etc/install-recovery.sh, Read-only file system
rm failed for /system/recovery-from-boot.p, Read-only file system
rm failed for /data/local.prop, No such file or directory
CWM Recovery!!!
Press any key to continue . . .
Any ideas how to get to CWM?
Looks like you need to root again after your upgrade. Run MT's Root&RecoveryAIO.bat again and select the "Root ZV8" option.
[EDIT]
My bad. That's what you are trying to do! I've been up all night and am tired. Did you get any errors when you ran the "Prepare for Update" option before you upgraded? That option actually pushes the superuser files back to your phone and the "Root ZV8" option just goes back and set's the permissions. You can try manually running these commands with adb first.
Files\adb push Files\zergrush /data/local/tmp/zergrush
Files\adb shell "chmod 755 /data/local/tmp/zergrush"
here is my log...
i keep failed with unlock my bootloader on my x8,w8(root and checked unknown sources&usb debugging)
i edi do..some 1 know what problem with my step?
process requires standard 2.x android firmware.
Premere un tasto per continuare . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
cannot stat 'bootTools\rageagainstthecage': No such file or directory
Unable to chmod /data/local/tmp/expl: No such file or directory
/data/local/tmp/expl: not found
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
3 KB/s (3087 bytes in 1.000s)
Unable to open router port: Permission denied
Diag_LSM: Diag_LSM_Init: Failed to open handle to diag driver, error = 13 ERR :
MSG Open handle failed, unable to open program 30eeeeee ver 10001 NOT FOUND
:FILE vendor/qcom-proprietary-qsd8k/oncrpc/oncrpc/oncrpc_cb.c:LINE 231:ARG1 82
0965102:ARG2 65537:ARG3 0:
ERR :MSG Couldn't setup RPC call :FILE vendor/qcom-proprietary-qsd8k/oncrpc/on
crpc/oncrpc_cb.c:LINE 276:ARG1 0:ARG2 0:ARG3 0:
Error: Failed to lookup client for 0x30EEEEEE 0x00010001
FATAL :MSG Failed to lookup RPC client. prog = 820965102, vers = 65537, tout =
0 :FILE vendor/semc/system/core/miscta/libmiscta/rpc_service.c:LINE 65:ARG1 820
965102:ARG2 65537:ARG3 0:
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
/data/local/tmp/expl: not found
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
502 KB/s (8064 bytes in 0.015s)
insmod: init_module '/data/local/tmp/mapper_2.6.29.ko' failed (Operation not per
mitted)
Second, we need to write semcboot
3054 KB/s (588228 bytes in 0.188s)
can't find userdate partition
Premere un tasto per continuare . .
I would suggest unlocking while with the stock 2.1 firmware. Root it and try again.
Sent from my E15i using xda app-developers app
Chris95X8 said:
I would suggest unlocking while with the stock 2.1 firmware. Root it and try again.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
okie.i try it . thank you.
Do what Chris95X8 suggested. And also TURN OFF your antivirus before doing all of this. If it still says files are missing, redownload everything and unlock your bootloader while your antivirus is off.
Sent from my X8 using Tapatalk 2
I followed this guide http://forum.xda-developers.com/showthread.php?t=1254225 and after running msm7227_semc.cmd i got this:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
cannot stat 'bootTools\rageagainstthecage': No such file or directory
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
120 KB/s (3087 bytes in 0.025s)
Unable to open router port: Permission denied
Diag_LSM: Diag_LSM_Init: Failed to open handle to diag driver, error = 13 ERR :
MSG Open handle failed, unable to open program 30eeeeee ver 10001 NOT FOUND
:FILE vendor/qcom-proprietary-msm7k/oncrpc/oncrpc/oncrpc_cb.c:LINE 231:ARG1 82
0965102:ARG2 65537:ARG3 0:
ERR :MSG Couldn't setup RPC call :FILE vendor/qcom-proprietary-msm7k/oncrpc/on
crpc/oncrpc_cb.c:LINE 276:ARG1 0:ARG2 0:ARG3 0:
Error: Failed to lookup client for 0x30EEEEEE 0x00010001
FATAL :MSG Failed to lookup RPC client. prog = 820965102, vers = 65537, tout =
0 :FILE vendor/semc/system/core/miscta/libmiscta/rpc_service.c:LINE 65:ARG1 820
965102:ARG2 65537:ARG3 0:
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
246 KB/s (8064 bytes in 0.032s)
insmod: init_module '/data/local/tmp/mapper_2.6.29.ko' failed (Operation not per
mitted)
Second, we need to write semcboot
2340 KB/s (596916 bytes in 0.249s)
can't find userdate partition
Press any key to continue . . .
Can someone help me with this please?
Found solution, which is:
http://forum.xda-developers.com/showthread.php?t=1117100
Somehow x8toolbox managed to successfully unlock my phone
Hi,
I have some problems with rooting my sensation xl wondering if someone can help. My sensation xl was running on 4.0.3 with sense 3.6. Hboot 1.28. (S-OFF). I successfully unlocked bootloader using htcdev site and then I tried different methods (Doomlord,HTC super tool, TPSparkyroot, OneXKit) to root but I have failed, I think I might be doing something wrong. I get errors related to the file system read/write permissions. e.g. Doomlord give these errors:
* daemon started successfully *
--- creating temporary directory
mkdir failed for tmp, File exists
--- cleaning
rm failed for *, No such file or directory
--- pushing zergRush
cannot stat 'files\zergRush': No such file or directory
--- correcting permissions
Unable to chmod /data/local/tmp/zergRush: No such file or directory
--- executing zergRush
/system/bin/sh: ./data/local/tmp/zergRush: not found
--- WAITING FOR DEVICE TO RECONNECT
if it gets stuck over here for a long time then try:
disconnect usb cable and reconnect it
toggle "USB DEBUGGING" (first disable it then enable it)
--- DEVICE FOUND
--- pushing busybox
1976 KB/s (1075144 bytes in 0.531s)
--- correcting permissions
--- remounting /system
mount: permission denied (are you root?)
--- checking free space on /system
0 KB/s (439 bytes in 1.000s)
df: /data/DxDrm/fuse: Permission denied
df: /mnt/secure/asec: Permission denied
--- Free space on /system : 73% bytes
test: 73%: bad number
--- NOT enough free space on /system!!!
--- making free space by removing Google Maps
--- copying busybox to /system/xbin/
/system/xbin/busybox: cannot open for write: Read-only file system
--- correcting ownership
Unable to chmod /system/xbin/busybox: No such file or directory
--- correcting permissions
Unable to chmod /system/xbin/busybox: No such file or directory
--- installing busybox
/system/bin/sh: /system/xbin/busybox: not found
--- pushing SU binary
failed to copy 'files\su' to '/system/bin/su': Read-only file system
--- correcting ownership
Unable to chmod /system/bin/su: No such file or directory
--- correcting permissions
Unable to chmod /system/bin/su: No such file or directory
--- correcting symlinks
rm failed for /system/xbin/su, No such file or directory
link failed Read-only file system
--- pushing Superuser app
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
--- cleaning
--- rebooting
Also, now when I switch phone to recovery mode (volume down + power), I am not able to factory reset it. When I click on Factory Reset or Recovery, it hangs at HTC logo :crying: Only option to factory reset my phone is to lock the bootloader and unlock it again
Can anybody tell what I am doing wrong?
Any help will be appreciated.
download lexmazters XL tool and use that. perhaps you need to reflash stock rom if everything goes not working.
Thats easy
THATS EASY IF YOU ONLY NEED ROOT.Now DO A NEW FOLDER and extract this CLOCKWORKMODRECOVERY and enable usb debbugging in your phone and run flashrecovery.bat wait untill reboot boot loader and type cwm.So now weve flashed recovery now doanload this SUPER SU(ROOT) and copie it to sd card then go to bootloader and then press on recovery and go in recovery .Now in recovery go down with volume keys to install zip from sd card and press power button then press choose zip from sd card and with volume buttons search the super su file and flash it . THATS THE PERFECT WAY NO GO AND TRY IT GOOOOOOD LUCK :good: :good: :good: :good:
S.a.M.e.R_d said:
THATS EASY IF YOU ONLY NEED ROOT.Now DO A NEW FOLDER
THATS THE PERFECT WAY NO GO AND TRY IT GOOOOOOD LUCK :good: :good: :good: :good:
Click to expand...
Click to collapse
Writting with big letters means that you are yelling. Stop doing that all the time!
I like yelling
Sent from my HTC One X using xda premium
Then you will have to read the rules, it is not allowed
So in the [Root 4.4.X] Pie for Motorola devices thread (thanks to jcase) on page 32 (thanks to dubyajaysmith):
http://forum.xda-developers.com/mot...ot-4-4-x-pie-motorola-devices-t2771623/page32
found this gem for Mac users. But I'm an old noob (ran CM on GalaxyS forever using Windows tools) to using adb on Mac. Tried to follow instructions but apparently not getting it right. I can get root (partial) but it doesn't survive "soft reboot" (which I'm not sure which of several methods is correct).
TiBuPro seems to work (sorta). Root Checker Basic says root access.
return from Terminal had a couple fails?:
xx-mbp:~ x$ chmod 700 mxr.sh && ./mxr.sh
5083 KB/s (1538138 bytes in 0.295s)
99 KB/s (192 bytes in 0.001s)
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
pie by jcase
want to buy me pie? paypal-> [email protected]
Root not retained after “soft reboot” (holding power down for 5 sec - is this correct “soft reboot”?… or reboot from TiBuPro? (nope)… or?)
So did adb ./mxr.sh - returned:
4345 KB/s (1538138 bytes in 0.345s)
28 KB/s (192 bytes in 0.006s)
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
mkdir failed for /data/local/atvc/dalvik-cache, File exists
pie by jcase
want to buy me pie? paypal-> [email protected]
After TBP reboot still lost root, adb ./mxr.sh or chmod 700 mxr.sh && ./mxr.sh
again:
platform-tools d$ chmod 700 mxr.sh && ./mxr.sh
4337 KB/s (1538138 bytes in 0.346s)
33 KB/s (192 bytes in 0.005s)
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
mkdir failed for /data/local/atvc/dalvik-cache, File exists
pie by jcase
want to buy me pie? paypal-> [email protected]
so again, not doing something right…
Tried installing ChainFire SU & Xposed Framework, tripping at the Xposed Framework Installer's "Install/Update" Framework (using "classical"), does it's thing, cancel "reboot now" and use "soft reboot" (perhaps this isn't the correct "soft reboot"?) which after reboot leaves root disabled again.
So please forgive wall of text, suspect these fails:
rm failed for /data/local/atvc/blop.asec, No such file or directory
rm failed for /data/local/atvc/blop, No such file or directory
mkdir failed for /data/local/atvc/dalvik-cache, File exists
are the "root" (lol, pun) of trouble...
Can anyone help the helpless here? TIA