I have Galaxy Tab from Verizon and I tried to upgraded to Gingerbread but it didn't work and I couldn't get into the recovery mode to downgrade it back... I took it to some guy who said he can fix it but he couldn't, instead it now never turn on and only shows that its alive when I plug it to wall charger (it shows the mobile-triangle-PC image) it doesn't do that when I connect it to PC or without being plugged to anything!!! Power + Volume down does nothing, same for Power + Volume up!!!
Any suggestions?
have you held the power button till it turns off while plugged in? If you can force it to power off, you may be able to get it into download mode and go back to stock firmware that way.
I tried doing so before, after 7 seconds of holding the power button, the (mobile-triangle-PC) image starts to flash (go and come back) on 1 second pattern until I leave the button, it then gets back to the stable (mobile-triangle-PC) screen
Related
Hi
I have just tried to update to 2.2, i updated Kies first, connected my phone, it came back saying update available, fully charged battery, all seemed to go ok, phone rebooted, but when coming back up I get the logo, and the start up music, then it vibrates a bit the keys on bottom left and right are lit up, screen black and doesn't seem to do anything.
I have removed battery, have tried 3 button restore (no effect) it just keeps vibrating every min or so.
holding the power button restarts it, thats about all i can get it to do.
Have I ruined the phone?? please help.
boycey66 said:
Hi
I have just tried to update to 2.2, i updated Kies first, connected my phone, it came back saying update available, fully charged battery, all seemed to go ok, phone rebooted, but when coming back up I get the logo, and the start up music, then it vibrates a bit the keys on bottom left and right are lit up, screen black and doesn't seem to do anything.
I have removed battery, have tried 3 button restore (no effect) it just keeps vibrating every min or so.
holding the power button restarts it, thats about all i can get it to do.
Have I ruined the phone?? please help.
Click to expand...
Click to collapse
First question... Did you have a lagfix on the phone before you tried to update it?
Second question... If you answered yes to question one... Did you remove / disable the lagfix before you flashed through Kies?
i had lag fix and was rooted, i plugged it in to laptop and it was recognised and said update 2.2 available, so i thought that was ok.
Now it is as i describe as above, i get battery logo if i plug into laptop, bottom left and right keys are lit but don't do anything, screen is black and vibrates every couple of minutes, if i hold power button get the GT galaxy s screen then the music, then the S galaxys screen which goes black with the two keys lit, if i press power button again it goes off and to the battery logo again.
Cannot get odin or kies to recognise phone plugged in, or get it into recovery or download mode
boycey66 said:
i had lag fix and was rooted, i plugged it in to laptop and it was recognised and said update 2.2 available, so i thought that was ok.
Now it is as i describe as above, i get battery logo if i plug into laptop, bottom left and right keys are lit but don't do anything, screen is black and vibrates every couple of minutes, if i hold power button get the GT galaxy s screen then the music, then the S galaxys screen which goes black with the two keys lit, if i press power button again it goes off and to the battery logo again.
Cannot get odin or kies to recognise phone plugged in, or get it into recovery or download mode
Click to expand...
Click to collapse
you didn't answer the question but I will assume that you were using a lagfix but did not disable it before you tried to update you phone.
try removing the battery for a few minutes and try going to download mode (hold vol down + home + power)
Go into recovery mode (vol up + home + power 'till screen switches on) and select the delete data/cache (?) option with the volume keys, using the middle button to confirm. Your phone will work, but unfortunately, you'll loose all your app/settings =/
Should have un-lagfixed before updating :-s
let us know if Rawat's way worked for you.
I had disabled my lagfix too when updating to doc jk3 using cwm and same thing happened to me.
Only way i fixed it was to flash my phone's stock rom, jh2 2.1 using odin3 v1.3 and the firmware from samfirmware. (pda only, no pit, no repartition)
then i upgraded to froyo again and it worked.
My LG G2 downloaded an update last night and I accepted the install. I woke up to a blank screen and i Can't do anything on it. No download mode or recovery. It was rooted before hand. VS980 Please someone help me. I see the lg screen for a few seconds then it goes all blank. If its plugged into the computer the LG screen only comes up for a split second.
Charge it for a few hours and go from there. Sounds like the battery is dead.
If you hold the power button does it continually vibrate in spurts? If so, then it's most likely just a dead battery.
Here's some more help for you.
Hold down power + volume down...the phone will turn off, but don't release them yet. It will flash LG logo for a split second and then turn off completely and stay off. You may release the buttons now.
Press and hold power + volume down. when you see the LG logo release the power button ONLY and then quickly press it and hold again until you boot into recovery.
Hit power twice to enter recovery
Click to expand...
Click to collapse
Holding volume up + plugging in your USB to the computer will get you to download mode as well and let you stock the phone.
jer_stud56 said:
Charge it for a few hours and go from there. Sounds like the battery is dead.
If you hold the power button does it continually vibrate in spurts? If so, then it's most likely just a dead battery.
Here's some more help for you.
Holding volume up + plugging in your USB to the computer will get you to download mode as well and let you stock the phone.
Click to expand...
Click to collapse
Its definitely not dead. The screen stays on, but black.I can get into that one hardware mode if i press down all three buttons.
I just acquired as P1000 model. I am having 2 problems. 1 I think I fixed, but the other is beyond me.
Problem 1 - When I plug the charger in and I use the USB cord from my 2.1A wall outlet I get a batter logo with a spinning circle and then it flashes dark and starts over again. I think I've tracked this down to the tablet not liking my charger as it charges fine off my laptop.
Problem 2 - After letting it charge for a while, I went to power it up and it gives me the Galaxy Tab logo, but then it goes to a boot animation that is some triangles flipping over each other. It sits on this for a while, then it goes to a black screen and starts the same triangle boot animation all over again.
I've tried searching repeatedly to no avail and I can't seem to find out what I need to do in order to fix this. I welcome any advice, I don't know if it's modded or stock, or what kernel is even on it. When I push the volume down and power buttons I get a note about downloading with a picture of an Android with what looks like a shovel pointed backward.
1stly try factory reset through recovery (by pressing & holding volume up then press power button) to see if it solved your problem.
2ndly if the first method didn't you need to flash the phone with odin using stockrom in download mode (by pressing & holding volume down then press power button).
you can get your stockrom at sammobile or google it.
and also Next time when reporting an issue consider putting Screen shot for better understanding.
Here's a quick reference for how to reboot and reset your 2019 Galaxy Tab A 10.1 (SM-T510/T515) using the hardware buttons:
Force restart:
- If your device is frozen and unresponsive, press and hold the Volume Down + Power keys simultaneously for more than 7 seconds to restart it.
Boot to Recovery Mode:
- Power off the device
- Press and hold the Volume Up + Power keys at the same time.
- Release both keys when you see Recovery Mode.
Boot to Download Mode:
- Disconnect the USB cable
- Power off the device
- Press and hold the Volume Down + Volume Up keys
- Insert the USB cable
Boot to Safe Mode:
- Power off the device
- Press and hold the Power key.
- When the boot logo appears, release the Power key and then press and hold the Volume Down key.
- Continue to hold the Volume Down key until the device finishes restarting.
- Safe Mode will display in the bottom left corner of the screen.
Since there is no Bixby button, these combinations are different than the Galaxy S10. If you know of additional combinations, please contribute to the discussion below and I'll consolidate here.
If there’s no response on your device or you're stuck in a boot loop, then you might need to wait for the battery to drain. The 2019 Galaxy Tab A 10.1 has a non-removable battery pack, so disconnecting that isn't an option. Hopefully, the system reverts to its normal function with a cold boot. This can take time if the battery has high charge left at time of failure. Depending on how fast your battery drains, this can mean waiting for a few hours to several days.
UPDATE: With the right timing, you can break out of a boot loop into Download Mode...but it's tricky:
Insert USB Type C cable connected to your PC
Press and hold the Power and Volume Down keys for exactly 7 seconds (hard reset)
Release the Power key and press and hold both Volume Up & Down keys (enter Download Mode)
If you don't see the blue bootloader unlock warning screen, keep repeating the above two steps
The trick here is that you're trying to time your switch to the Download Mode keys for the exact moment the hard reset takes effect. If you see the boot logo while still holding the first key combination, it's too late. If you switch too early, you won't trigger the hard reset.
I've had to hold down both volume up and volume down while plugging in usb to get the unlock screen to populate. Canadian Wifi variant.
Jambii1987 said:
I've had to hold down both volume up and volume down while plugging in usb to get the unlock screen to populate. Canadian Wifi variant.
Click to expand...
Click to collapse
Thanks, that was an error in my initial post. I was figuring these out by trial and error, but it turns out that our hard resets are basically the same as for the Galaxy M30, which also uses the Exynos 7904 SoC and has no Bixby key.
https://www.hardreset.info/devices/samsung/samsung-galaxy-m30/download-mode/
UPDATE: Also the same as for the Galaxy A30 and some others.
https://www.hardreset.info/devices/samsung/samsung-galaxy-a30/download-mode/
Jambii1987 said:
I've had to hold down both volume up and volume down while plugging in usb to get the unlock screen to populate. Canadian Wifi variant.
Click to expand...
Click to collapse
Yes, I did the same way
US version
1. Enable OEM Unlock
2. Turn the tablet off and unplug the cable
3. Press and hold both volume up and volume down buttons and plug USB cable to host computer
4. You will get wipe screen. Long press volume up to unlock the bootloader.
Now I have to find matching ROM and patch the boot.img and flash.
I believe you have to disable Vault Keeper to keep root intact.
Brand new out the box 11am this morning.
Opened the parcel cool no damage. Powered up fine, had a mess with it, no problems check the speakers were fine and no issues plugged it on charge to 100% took it off and left it for an hour or so, went back to it and physically used it to use Facebook and play candy crush cool no problems. Took a few photos and no problems again. Put it on the side still on near 90% and went back to it 30 minutes later completely off and won’t turn back on, tried charging it nothing no sign of life, tried rebooting it and still nothing. Please tell me that this is not the end and I need to get a replacement... ?*
christina98 said:
Opened the parcel cool no damage. Powered up fine, had a mess with it, no problems check the speakers were fine and no issues plugged it on charge to 100% took it off and left it for an hour or so, went back to it and physically used it to use Facebook and play candy crush cool no problems. Took a few photos and no problems again. Put it on the side still on near 90% and went back to it 30 minutes later completely off and won’t turn back on, tried charging it nothing no sign of life, tried rebooting it and still nothing. Please tell me that this is not the end and I need to get a replacement... ?*
Click to expand...
Click to collapse
Have you tried getting into download mode? Or recovery for that matter.
Triscuit said:
Have you tried getting into download mode? Or recovery for that matter.
Click to expand...
Click to collapse
I’ve not even been able to get it back on, I’ve attemp a reboot countless of times and still nothing rectifys it. I spoke with Samsung they feel it’s a major fault with the tablet and have told me to request a replacement from my provider or even a refund.
Forgot pattern password, unable to power 510 Tab A off since pattern password is required. How to wipe tab or reset to factory without powering off?
Magendanz said:
If there’s no response on your device or you're stuck in a boot loop, then you might need to wait for the battery to drain. The 2019 Galaxy Tab A 10.1 has a non-removable battery pack, so disconnecting that isn't an option. Hopefully, the system reverts to its normal function with a cold boot. This can take time if the battery has high charge left at time of failure. Depending on how fast your battery drains, this can mean waiting for a few hours to several days.
UPDATE: With the right timing, you can break out of a boot loop into Download Mode...but it's tricky:
Insert USB Type C cable connected to your PC
Press and hold the Power and Volume Down keys for exactly 7 seconds (hard reset)
Release the Power key and press and hold both Volume Up & Down keys (enter Download Mode)
If you don't see the blue bootloader unlock warning screen, keep repeating the above two steps
The trick here is that you're trying to time your switch to the Download Mode keys for the exact moment the hard reset takes effect. If you see the boot logo while still holding the first key combination, it's too late. If you switch too early, you won't trigger the hard reset.
Click to expand...
Click to collapse
Ay, thanks i finally got it into download mode, it gave an error at the top left like kernel rev check fail or smth, it was boot looping and with this trick i got it into the bootloader imma flash stock again, THANKS AGAIN!
Dear all,
I was on beyond 5.3 with twrp 3.3.1.7 and I wanted to update everything. Magisk, root etc was working fine.
I downloaded the patched twrp file from the beyond telegram chat and flashed it as image into the recovery partition.
The installation was finished in 2 seconds, but stupid me chose to power off instead of rebooting the recovery.
So I tried to enter recovery using the button combo but nothing happened and I was stuck with the samsung logo.
The current status is that my phone only shows the samsung logo.
Holding the power button for a minute doesn't do anything.
Pressing the button combo for recovery mode doesn't do anything.
Pressing the button combo for dl mode makes the phone reboot. It vibrates for a sec, then the samsung logo shows again.
If I keep pressing all 3 buttons the phone keeps on rebooting and vibrating each time, but dl mode never appears. If I let go of the power button the logo stays and again, nothing happens.
So basically I can't enter dl mode nor reboot.
Should I let it run dry and try again or just throw out of the window immediately? :crying:
I let the battery drain over night. Phone was finally off.
So when I plug it in, the Samsung Logo appears and doesn't change. It just stays like that forever until the battery drains.
Pressing the power button doesn't do anything, no matter how long. It doesn't reboot nor does the logo disappear.
Pressing vol+, bixby and power again does nothing.
Vol-, bixby and power makes the phone reboot. The screen turns black, the phone vibrates shortly, the logo reappears. If I keep pressing the buttons the phone reboots again, and again, and again, mever reaching download mode.
If I let go of the power button and keep pressing vol- and bixby the phone stays black and won't even show the logo. Nothing happens. If I let go of either of the two buttons the logo appears again.
It won't boot, won't go into recovery or go into dl mode.
I'm doing all this while it's plugged into the usb port of my pc, and it doesn't get recognized. Samsung 300k tool doesn't recognize it either.
Now I know the meaning of "bricked" lmao.
Does anyone know how to possibly fix this?
Pressing only the power button for a minute literally does nothing. Like hell, how is that even possible?
You can try this to go to download mode:
Vol down + bixby + usb cable connect to PC
It's advisable to charge battery first before flashing firmware.
XTrail02 said:
You can try this to go to download mode:
Vol down + bixby + usb cable connect to PC
It's advisable to charge battery first before flashing firmware.
Click to expand...
Click to collapse
I tried that for like a thousand times already but now it chose to magically work somehow.
I think I peed myself a little when that ugly turquoise screen appeared and I screamed from sheer happyness.
THANK you!!!
The problem that doesn't stop giving lmao.
Got into DL mode, got odin to start, but after like 10 seconds my phone dies and odin fails.
Now I cant get into DL mode, but rather only the "an error occurred while updating the device software. use the emergency recovery function in the smart switch pc software."
Could it be the battery that simply dies?
hoeni said:
The problem that doesn't stop giving lmao.
Got into DL mode, got odin to start, but after like 10 seconds my phone dies and odin fails.
Now I cant get into DL mode, but rather only the "an error occurred while updating the device software. use the emergency recovery function in the smart switch pc software."
Could it be the battery that simply dies?
Click to expand...
Click to collapse
Yes most probably a discharged battery. Hopefully you can go to DL mode again after charging your phone.
hello,
I've and S10e and because an important app to me I need to go back to android 9 where it works.
I've read a lot info about downgrade, but no one says ROOT/UNBRICK.
Can someone inform if there is a way of downgrade without ROOT (maintaining the warranty).
thanks in advance
P.S.: Maybe too naive question, sorry for that