HELP i cant recieve calls after flashing new kernel !!! - XPERIA X8 Q&A, Help & Troubleshooting

hi today i flashed FXP new kernel and for some reason i cannot recieve any incoming calls :S i can text out and get texts and i can call out this is wierd i have checked the kernel and it should allow me to recieve calls but its not nothing to do with kernel as its fine. i cant flash with SEUS or pc companion or flash tool i have flashed over 10 diff back ups and nothing
okay so i finally got flash tool to flash stock rom. But after flashing it just refuses to turn on not even charging it works nor if i take battry out and plug it back in whilst holding the power button. and it will not go into flash mode. from my side of things it has bricked no way back for it now unless blagus or fxp can enlighten me on a way to recover

It seems you have the first bricked phone due to bootloader problems..
If so, as of now only SE can help you..
Try taking the battery out for at least 15 secs.
Good luck.
Sent from my E15i using XDA App

What Rom did u use when u unlocked the bootloader?
Sent from my E15i using XDA App

And also did you try flashing the stock kernel again,,?
Sent from my E15i using XDA App

Try to reflash baseband,maybe it'll help

no good phones dead
Truer absolutely everything refuses to turn on fails flashing because it has no flash mode no power nothing
Refraze that I'm gana try something ill post progress very soon but it goes into flash mode but for like half a second a d even if day flashing starts it fails even of I keep hold over bk button

Was the battery low when u flashed it back to stock by any chance?
Sent from my X8 using xda premium

Questioner and Rikcon, did you guys at least read his post?
The phone doesn't even turn on, how can he flash anything?
Paul1989, can you charge the battery in another phone? It seems it's discharged and the phone is not charging it.

Buy another x8, use it's battery and when u r done return it
Sent from my E15i using XDA App

okay so i finally got the phone to turn back on after about 3hurs of trying to flash anything i could ,baseband,kernels stock rom, nothing worked for hours untill i gave it 1 last try and it turned on but !! it does not get pastr sony logo. i have flashed new basebands kernels roms the lot and NOTHING i do can gt it past this f**king logo :'( i will update with progress later but it seems because i unlocked my boot loader and then straight after i unlockerd with the omnius tool that something has gone seriously wrong
OKAY people my friend got my phone back on but it cost me just under £30 lol but im glad

The fact that the phone is on is a good sign have you tried restoring the bootloader to its locked state it may fix your problem just have to make sure you've got the original kernel just have to go into s1tool and press restore
Sent from my X8 using xda premium

andrewtjb said:
The fact that the phone is on is a good sign have you tried restoring the bootloader to its locked state it may fix your problem just have to make sure you've got the original kernel just have to go into s1tool and press restore
Sent from my X8 using xda premium
Click to expand...
Click to collapse
have tryed this i get only ERROR. think it because i dont know what the last thing i flashed to it was lol. i have tryed to restore so many times. just will not work but i have got a friend with riffbox so i have called him and he has picked it up to see if he can get it on again. hopefully he has because i need to see if my kernel has bugs ect and check everythings working on it . will let you all know tonight when he brings it back.

Related

[Q] Bricked My Phone :-(

Hi
I tried to upgrade my phone, I9000s, from 2.3 to 2.4 this afternoon via Odin and it has gone wrong and I think I have bricked the phone.
I cannot get into download mode now, I could before after bricking, but not now, and all I get is the phone and computer symbols.
Can anybody advise me what I do next.
I am in the UK
Thanks
2.4 rom for i9000? I think that you' ve done something terribly wrong...
Sent from my GT-I9000 using Tapatalk
If you tried to go from 2.3.3 to 2.3.4 and you got screwed bootloaders, you might need to take your phone to service. But try reading this guide first: http://forum.xda-developers.com/showthread.php?t=1134975. Hope you get your phone up&running again
Sent from my GT-I9000 using xda premium
mealmond said:
Hi
I tried to upgrade my phone, I9000s, from 2.3 to 2.4 this afternoon via Odin and it has gone wrong and I think I have bricked the phone.
I cannot get into download mode now, I could before after bricking, but not now, and all I get is the phone and computer symbols.
Can anybody advise me what I do next.
I am in the UK
Thanks
Click to expand...
Click to collapse
u mean from 2.3.3 to 2.3.4. so the mistake is
when u turmed ur phone to download mode and connect to pc . Odin didnt regonized ur phone and u press start ? as many ppl want flash fast .
so try this
1st : Move ur battery out . plug ur phone to recharge w/o battery if ur screen turn on . then press vol down+home+power . if not do the same with battery .
if those doesnt work check the :
2nd : remove battery . open Kies to ur PC plug ur phone with USB cable to connect with ur pc , w8 some mins to regonize ur phone if ur screen trying to get on plug the battery to ur phone to recharge via pc then try to get download mode . if nothing of those doesnt work for u then u must
3rd Buy USB JIG from ebay or get ur phone to service (if u had rooted phone u will pay)
It happened to me before...
The only solution was buying a jig on ebay to unbrick the phone.
Before that i sent my phone to repairs and it was solved.
Good luck
Sent from my GT-I9000 using Tapatalk
The little compute symbol with the arrows is a version of download mode. It is the emergency flash mode and odin should still recognize it and u should be able to flash a full firmware that had bootloaders
Sent from my GT-I9000 using Tapatalk
its really rare to screwed ur main bootloader on the SGS.. maybe you could buy the jig but i`ve never tried the jig but maybe you could try to take out your battery and wait a couple of minutes.. maybe half hour to be safe, before you try to switch on your phone.. but after you place back the battery make sure you doesnt touch any button except the 3 button combo for download mode.. i`m not sure why but that has been the case for me when i got screwed during flashing new rom when i push other button such as the home button before the 3 button combo the phone just didnt respond..
lgkahn said:
The little compute symbol with the arrows is a version of download mode. It is the emergency flash mode and odin should still recognize it and u should be able to flash a full firmware that had bootloaders
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
+1 to that
if not buy a jig off ebay, like $5
Sent from my GT-I9100 using Tapatalk
Hi
Thanks for all the replies, sorry I have not been back on.
Not sure how I managed it, but I got back to the point of the yellow download symbol again and flashed the stock 2.3 Gingerbread I had on file.
All is now working again but it is showing as 2.3.4.
Something has obviously got mixed up though, as I am in the UK and now have Swisscom on start up and close down.
It all appears to be working ok and after a while I managed to root it again.
I suppose I should really looking in to flashing it again so I don't have the Swisscom coming up, but I will leave it as it is until I feel a little more brave after my near miss.
Thanks again.
Martin
mealmond said:
Hi
Thanks for all the replies, sorry I have not been back on.
Not sure how I managed it, but I got back to the point of the yellow download symbol again and flashed the stock 2.3 Gingerbread I had on file.
All is now working again but it is showing as 2.3.4.
Something has obviously got mixed up though, as I am in the UK and now have Swisscom on start up and close down.
It all appears to be working ok and after a while I managed to root it again.
I suppose I should really looking in to flashing it again so I don't have the Swisscom coming up, but I will leave it as it is until I feel a little more brave after my near miss.
Thanks again.
Martin
Click to expand...
Click to collapse
you must have installed jvr swisscom firmware
Hi
Could somebody point me to the correct version of 2.3.4 for the UK for me to flash.
I have had another look at Samfirmwares but I am still unsure of the correct version for the UK.
Also, on checking my phone, it is marked as CSC unkown, it that something I need to worry about.
Thanks
Martin
mealmond said:
Hi
Could somebody point me to the correct version of 2.3.4 for the UK for me to flash.
I have had another look at Samfirmwares but I am still unsure of the correct version for the UK.
Also, on checking my phone, it is marked as CSC unkown, it that something I need to worry about.
Thanks
Martin
Click to expand...
Click to collapse
The only 2.3.4 are XXJVR and XXJVS.
Look here:
http://forum.xda-developers.com/showthread.php?t=1011901
CSC is the APN setting. You can set it yourself actually.

[q] downloading do not turn off target

HELP HELP HELP -- I recently plugged my phone into my com to transfer music. samsung kies then started up and told me i needed a firmware upgrade. I proceeded to upgrade and mid upgrade i received an on screen message that my device wasn't recognised and the upgrade was auto cancelled. I now have a message with bright yellow/green trianle that says "do not turn off target". I have reinstalled kies - no luck. knocked phone on and off -no luck. i'm at a loss with what to do with the phone now !! phone not even being recognised by com or kies. Can anyone help please??? many many thanks in advance... thanks. ian.
Seems that you're new to that, so let me explain: if you see the yellow triangle with the android, you're in download mode. Normally, you access it by pressing power+home+vol down buttons while screen is off. As long as you can access download mode, your device isn't bricked. Now that you can't access anything else than download mode, you have to flash a new firmware with Odin. I recommend you to search for the JW4 firmware here in general section. There you should find help on how to flash it(best is Faryaab's thread).
maybe you can try and do a hard reset and flash a ROM from yr SD card..reboot in recoverymode..if the phone does not reboot..try and run the rooting program,might work.But most likely you'll have to reinstall the firmware...
Sent from my GT-I9001 using xda premium
i see someone posted your answer already.Good luck!!
Sent from my GT-I9001 using xda premium
kvandermade said:
maybe you can try and do a hard reset and flash a ROM from yr SD card..reboot in recoverymode..if the phone does not reboot..try and run the rooting program,might work.But most likely you'll have to reinstall the firmware...
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Yep, I don't think that he has rooted, so flashing a ROM won't work.
hmmm....i get it..best thing to do i think,when it's up and running again..DoOMlords easy rooting kit worked fine for me.No problem getting it to work and you've got more options to fix any problem..good luck to the poster anyway xx
Sent from my GT-I9001 using xda premium
kvandermade said:
hmmm....i get it..best thing to do i think,when it's up and running again..DoOMlords easy rooting kit worked fine for me.No problem getting it to work and you've got more options to fix any problem..good luck to the poster anyway xx
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
I don't really think that he rooted his phone ever before, so I don't think that he needs root now... but if he wants to try it out, CF-root or DoOMlords rooting kit are the right choises.

[Q] [HELP] [SOLVED & HOW TO] Xperia X8 Seriously "Bricked"

EDIT: SOLVED THANKS TO damir87
Ok guys, after a lot of research and messing up I ended up needing to ask for help.
I started trying to install cyanogen mod 9 (Android 4.0.3) where everything was going fine, but when I flashed the kernel with the "Custom Gingerbread kernel nAa-11" and installed the cyanogen 9 ROM with xRecovery, but when I started the phone (And it's still like this ATM) after the Sony Ericson logo, it appears the XPERIA logo with the lighting animation, it does the animation about 3 - 4 times and freezes after that and stays there, sometimes it does the animation 3 times, disappears and appears the logo again and then freezes.
I realized this happened because I didn't unlock bootloader. I can actually check the bootloader and I get the message that says it's locked but you can unlock it but to unlock it I have to have it turned on with USB debugging on.
Also, sometimes when I try to flash it again, after connecting it and the green light turning on it says I have plugged the device in flash mode, then it says I unplugged it and tells me that an error occurred, then the phone boots up by it-self.
BTW I'm a bit newbie in the section of "flashing" and the kernel and the baseband stuff, I'm not sure if with flashing, you flash the kernel, the baseband, or the ROM it-self, or even if you can install a ROM with the flashtool with the phone on flashmode.
BTW I can't access xRecovery.
- SEUS Says my phone is already up to date and all I can do is click finish.
- PCC Says there's not software available for my phone.
WHAT WOULD BE PERFECT TO FIX THIS:
A way to change the ROM to the android 2.1.1.C.0.0 without booting the phone(in flash mode).
HOW I SOLVED IT
-I simply downloaded this stock ROM (2.1.1.C.0.0): http://www.mediafire.com/?eca0sualnao4c4c
-Then just used flashtool V0.2.9.1 (I think it's important that you use that exact version): https://rapidshare.com/#!download|5...|62602|R~5490459C5764641D4665C046409A620A|0|0
(Sorry for rapid**** host, couldn't get any better)
After that it took the phone about 5~ mins to start up after the 2nd SE logo.
Again thanks to damir87!
I was newbie too , but reading threads helped , use SEUS Sony PC Companion to restore to stock.
Sent from my X8 using XDA
CosminAdriaan said:
I was newbie too , but reading threads helped , use SEUS Sony PC Companion to restore to stock.
Sent from my X8 using XDA
Click to expand...
Click to collapse
Thanks for the reply, but Sony PC Companion needs the phone to be ON and on debug mode, actually I can't fully boot the phone and SEUS gets stuck on "checking connection to the phone" or something like that.
Also PCC says there's no available updates for the phone. <.<
Turn off phone , then do what seus asks
Sent from my X8 using XDA
CosminAdriaan said:
Turn off phone , then do what seus asks
Sent from my X8 using XDA
Click to expand...
Click to collapse
The PC companion says there's no software for my phone and,
the SEUS says my phone is already up to date.
When i used seus i had right down a button option to reflash.
Sent from my X8 using XDA
CosminAdriaan said:
When i used seus i had right down a button option to reflash.
Sent from my X8 using XDA
Click to expand...
Click to collapse
You mean on the SEUS software? I only get this:
i742.photobucket. C 0 M /albums/xx68/CHAPI92/SEUS.gif
Sorry I can post the link because I don't have 8 posts... <.<
Please copy the link and change the " C 0 M " with "com".
I see , try another version of Seus..
Sent from my X8 using XDA
CosminAdriaan said:
I see , try another version of Seus..
Sent from my X8 using XDA
Click to expand...
Click to collapse
Like 2.7.12.4?
EDIT: I downloaded 2.7.12.4 and it says it cannot check the software version and it won't start.
I need to somehow fix it without SEUS/PCC
BUMP
Any other ideas please?
Dammit , no , im out of ideeas
Sent from my X8 using XDA
Anyone else could help please?
BUMP
Still need help :\.
BUMP
guys, problem haa!?
flash this with flashtool and all over again.. rooting, recovery, baseband.. THEN you can install custom rom mate, and if you wanna flash custom kernel read some stuff before! its not so complicated if you know what you doing!
damir87 said:
guys, problem haa!?
flash this with flashtool and all over again.. rooting, recovery, baseband.. THEN you can install custom rom mate, and if you wanna flash custom kernel read some stuff before! its not so complicated if you know what you doing!
Click to expand...
Click to collapse
Even I HATE rapidshare, hotfile, depositfile, share and uploading, I'll trust you and hope it works .
With this you say it'll do everything?
Even the rooting while on flashmode? and instal xRecovery?
Remember I can't access the phone.
BRB In 3 hours with the ****ty 30kb/s, gonna practice shuffle.
This file is stock 2.1 for x8 so when you flash this your phone will not be rooted and will not have recovery installed, thats you gonna do after flashing stock rom! btw B.Jay is write nice and detailed tutorial so you can follow these steps to make your phone work!
damir87 said:
This file is stock 2.1 for x8 so when you flash this your phone will not be rooted and will not have recovery installed, thats you gonna do after flashing stock rom! btw B.Jay is write nice and detailed tutorial so you can follow these steps to make your phone work!
Click to expand...
Click to collapse
Oh, ok great, and when flashing this it will install the default ROM and remove the android 4.0.3 ROM right?
EDIT: I already did that tutorial, when I tried to flash the phone with the 2.1.1.C.0.0, it gave me an error saying it can't prepare the files for the flashing, any idea?
PvM Chapi said:
Oh, ok great, and when flashing this it will install the default ROM and remove the android 4.0.3 ROM right?
EDIT: I already did that tutorial, when I tried to flash the phone with the 2.1.1.C.0.0, it gave me an error saying it can't prepare the files for the flashing, any idea?
Click to expand...
Click to collapse
Re-download...
Sent from my E15i using xda premium
Did you try PC Companion to repair the phone?
If so... do you know how to do that? I'm saying this because I bricked my phone once and I didn't knew hot to use th "repair" option. Only after a big search I found a step by step tutorial on how to do that...

Help please, i killed my phone

Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Flash 2.1 ROM ftf file with flash tool.
Wait I get you the link..
Sent From My W8 Using Tapatalk
Here...
http://www.mediafire.com/?eca0sualnao4c4c
After flashing, you just need to root again...
Sent From My W8 Using Tapatalk
Delta Mykos said:
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Click to expand...
Click to collapse
leave batterry and then take back, try to flash with PC companion (back to esclair),,,
don't be affraid, just conect it.,.,,
(because i done this experience month yesterday.,.
#sorry my bad english.,.
well ur a murderer and ull go to jail! lol jk... hope u bring ur phone back to life...
Sent from my MB526 using xda premium
Delta Mykos said:
Hello every1, please help....i think i broke my phone for good ....i instaled cm9 without flashing a kernel before...studip thing to do, i don't know why i did it, didn't read instruction, just downloaded the ROM
Now the phone won't budge, it keep turning on, it don't load into anything no rom, no recovery, i tryed to connect him with sony update and unroot it in order to bring stock rom up, but PC don't see the phone couse it didn't loaded into ROM....
Any suggestion before i trash it into garbage.....many thx
Click to expand...
Click to collapse
No dont throw your phoe in garbage..
Visit this link
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
This Called Soft-Bricked. You Can Fix It Yourself. Don't Worry. I Experience It 2Days Ago. Which My First Brick. And I Was Panic That Time. But With The Help Of XDA Member My Phone Back Alive Again
JiaYong said:
This Called Soft-Bricked. You Can Fix It Yourself. Don't Worry. I Experience It 2Days Ago. Which My First Brick. And I Was Panic That Time. But With The Help Of XDA Member My Phone Back Alive Again
Click to expand...
Click to collapse
When using PCC , don't click on "Update Phone". Your phone won't be recognized.
Click on "Repair Phone" , and follow instructions.
If every thing fails which is doubtfull send it to sony
Problem solved!
Thx u all for helping, harshitgroup your link was proved to be most valuable....
Thank u very much guys!!!!
Welcome ! You got your phone alive?

[Q] Galaxy S Advance Gt-I9070

I bought the Galaxy S Advance GT-I9070 around early January from Ad Dammam, Saudi Arabia it came with GB 2.3 after than I came back to India phone was working fine, after 9-10 days phone flashed the message that software update is available(without any info regarding the version of the update).
I updated the phone with that prompt.... After the whole update process screen displayed that phone update is complete and reboot the phone which i did Since then phone is dead, displaying nothing :crying:
I tried every solution on google but phone is not going into any mode "downloading" or "recovery" however for the first time when it all happened i tried to connect it to laptop and punched the combination of keys into phone the laptop for a while recognized and installed the drivers for the same but it didnt come up as a drive or anything, Now it is not even recognizing the phone connected. :crying:
Can anyone help?? I recently lost Galaxy S2 in car theft then I bought this??
Had you installed a custom kernel?
Sent from my GT-I9070 using xda premium
Shaaan said:
Had you installed a custom kernel?
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
nop screen is blank i can't do anything until it boots up! any solution? tried combination of keys but of no use!
Take it to Service or Repair Shop then... They might or may not charge you...
Sami Kabir said:
Take it to Service or Repair Shop then... They might or may not charge you...
Click to expand...
Click to collapse
i had gone there they said that they have to change the hardware and it will take around 1 and half month for that "part" to arrive :/ and i think they will charge hefty sum, so i brought the phone back so that i could try the alternative....
still any workarounds guys??
suraj18 said:
i had gone there they said that they have to change the hardware and it will take around 1 and half month for that "part" to arrive :/ and i think they will charge hefty sum, so i brought the phone back so that i could try the alternative....
still any workarounds guys??
Click to expand...
Click to collapse
Import? Looks like you got trolled. Even a hard brick takes 2 weeks for repair!
Sent from my GT-I9070 using xda premium
Agreed with Shaan... try another shop then...
but I still don't get it.. how can a software update "kill" your phone..?
When I was on GB, I got a software update and by mistake I tapped on "Install"... ( I didn't want to install because I was using custom kernel)... so after the update downloaded.. it went to Recovery or something to install but it couldn't.. my phone showed me an "Broken Android" logo or something and turned off... After turning it on everything was OK (fortunately)...
Click to expand...
Click to collapse
If the ota killed ur phone they will not charge u anything for the repair, search for official Samsung service centre. If I were u, I would try to open odin with the jb tar, connect the phone without the battery and while pressing vol(-) + power + home, as soon as it recognize the device press start to flash
Sent from my GT-I9003 using xda app-developers app
my i9070 is dead :crying: cannot access any things and pc do not recognize it and don't power up or recovery and download mode not working
cannot access the service center or buy jtag
:crying::crying:
You already posted in a few threads whats happened.
Dont spamm anymore with that.
http://forum.xda-developers.com/showpost.php?p=40958237&postcount=20
Sami Kabir said:
Agreed with Shaan... try another shop then...
but I still don't get it.. how can a software update "kill" your phone..?
Click to expand...
Click to collapse
dont know sent that phone back from where it was purchased and they provided a new phn as replacement
thanx all for suggestion

Categories

Resources