[Q] Bricked My Phone :-( - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi
I tried to upgrade my phone, I9000s, from 2.3 to 2.4 this afternoon via Odin and it has gone wrong and I think I have bricked the phone.
I cannot get into download mode now, I could before after bricking, but not now, and all I get is the phone and computer symbols.
Can anybody advise me what I do next.
I am in the UK
Thanks

2.4 rom for i9000? I think that you' ve done something terribly wrong...
Sent from my GT-I9000 using Tapatalk

If you tried to go from 2.3.3 to 2.3.4 and you got screwed bootloaders, you might need to take your phone to service. But try reading this guide first: http://forum.xda-developers.com/showthread.php?t=1134975. Hope you get your phone up&running again
Sent from my GT-I9000 using xda premium

mealmond said:
Hi
I tried to upgrade my phone, I9000s, from 2.3 to 2.4 this afternoon via Odin and it has gone wrong and I think I have bricked the phone.
I cannot get into download mode now, I could before after bricking, but not now, and all I get is the phone and computer symbols.
Can anybody advise me what I do next.
I am in the UK
Thanks
Click to expand...
Click to collapse
u mean from 2.3.3 to 2.3.4. so the mistake is
when u turmed ur phone to download mode and connect to pc . Odin didnt regonized ur phone and u press start ? as many ppl want flash fast .
so try this
1st : Move ur battery out . plug ur phone to recharge w/o battery if ur screen turn on . then press vol down+home+power . if not do the same with battery .
if those doesnt work check the :
2nd : remove battery . open Kies to ur PC plug ur phone with USB cable to connect with ur pc , w8 some mins to regonize ur phone if ur screen trying to get on plug the battery to ur phone to recharge via pc then try to get download mode . if nothing of those doesnt work for u then u must
3rd Buy USB JIG from ebay or get ur phone to service (if u had rooted phone u will pay)

It happened to me before...
The only solution was buying a jig on ebay to unbrick the phone.
Before that i sent my phone to repairs and it was solved.
Good luck
Sent from my GT-I9000 using Tapatalk

The little compute symbol with the arrows is a version of download mode. It is the emergency flash mode and odin should still recognize it and u should be able to flash a full firmware that had bootloaders
Sent from my GT-I9000 using Tapatalk

its really rare to screwed ur main bootloader on the SGS.. maybe you could buy the jig but i`ve never tried the jig but maybe you could try to take out your battery and wait a couple of minutes.. maybe half hour to be safe, before you try to switch on your phone.. but after you place back the battery make sure you doesnt touch any button except the 3 button combo for download mode.. i`m not sure why but that has been the case for me when i got screwed during flashing new rom when i push other button such as the home button before the 3 button combo the phone just didnt respond..

lgkahn said:
The little compute symbol with the arrows is a version of download mode. It is the emergency flash mode and odin should still recognize it and u should be able to flash a full firmware that had bootloaders
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
+1 to that
if not buy a jig off ebay, like $5
Sent from my GT-I9100 using Tapatalk

Hi
Thanks for all the replies, sorry I have not been back on.
Not sure how I managed it, but I got back to the point of the yellow download symbol again and flashed the stock 2.3 Gingerbread I had on file.
All is now working again but it is showing as 2.3.4.
Something has obviously got mixed up though, as I am in the UK and now have Swisscom on start up and close down.
It all appears to be working ok and after a while I managed to root it again.
I suppose I should really looking in to flashing it again so I don't have the Swisscom coming up, but I will leave it as it is until I feel a little more brave after my near miss.
Thanks again.
Martin

mealmond said:
Hi
Thanks for all the replies, sorry I have not been back on.
Not sure how I managed it, but I got back to the point of the yellow download symbol again and flashed the stock 2.3 Gingerbread I had on file.
All is now working again but it is showing as 2.3.4.
Something has obviously got mixed up though, as I am in the UK and now have Swisscom on start up and close down.
It all appears to be working ok and after a while I managed to root it again.
I suppose I should really looking in to flashing it again so I don't have the Swisscom coming up, but I will leave it as it is until I feel a little more brave after my near miss.
Thanks again.
Martin
Click to expand...
Click to collapse
you must have installed jvr swisscom firmware

Hi
Could somebody point me to the correct version of 2.3.4 for the UK for me to flash.
I have had another look at Samfirmwares but I am still unsure of the correct version for the UK.
Also, on checking my phone, it is marked as CSC unkown, it that something I need to worry about.
Thanks
Martin

mealmond said:
Hi
Could somebody point me to the correct version of 2.3.4 for the UK for me to flash.
I have had another look at Samfirmwares but I am still unsure of the correct version for the UK.
Also, on checking my phone, it is marked as CSC unkown, it that something I need to worry about.
Thanks
Martin
Click to expand...
Click to collapse
The only 2.3.4 are XXJVR and XXJVS.
Look here:
http://forum.xda-developers.com/showthread.php?t=1011901
CSC is the APN setting. You can set it yourself actually.

Related

Big problem about I9000 Warrantly

Today i am going to refresh my rom . After finishing, Galaxy S can not open...
Is Galaxy S or the battery problem?
Have any method to slove this problem?
I bought from Optus in Australia
Now Version is JM5 and he old version is Jm5,if i go to the custom services ,will i cease the warrant?
Thanks everyone to help.
as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!
If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??
dudeldei said:
If you seek help from the guys here, my guess is that you need to explain a bit more in detail what's not working, besides "cannot open".
"New version is JM5 and old version is JM5" ??
Click to expand...
Click to collapse
"cannot open" mean when i press the turn on/turn off button don't have any respond.
"New version is JM5 and old version is JM5" That is mean Before and after flashing version, the reason of flash again is i can not use Galaxy but i can enter the download mode. i think this information may help you to find mine problems..but i am not sure.
mcall_r said:
as long as you flashed it with a samsung-made firmware and not a custom ROM, i think your warrantly should still be ok!
Click to expand...
Click to collapse
But i refresh Galaxy via Odin, is it still ok?
ososos said:
But i refresh Galaxy via Odin, is it still ok?
Click to expand...
Click to collapse
Flash I9000DTJG4 if you got your phone from Optus in Australia.
Find it here.
i cannot switch on the Galaxy S even by any modes.
Simply, i think it is broken down and I dont know what to do. I am not sure if my warrant is still effective or not.
You know, generally flash the rom will cease warrant.I think people l solve my problem there... Because Xda's is professional...
Can someone move this thread :-(
I almost fell of my chair when reading "BIG PROBLEMS WITH I9000".
Big problem with flashing you mean !!
OH.. sorry .......
Admin move to correct section.
Sorry about that
Try charging the battery. and then switch on the phone..
SGS is pretty unbrickable
No problem
I hope you find a solution quick.
1. If the phone is turned off then remove the SD card, the SIM card and the battery.
2. Put the battery in only then enter Download mode. Hold in vol down and Home buttons then press the power button. Works every time.
3. OPTUS is currently using I9000DTJG4 available here
4. Set up ODIN with the correct files. PIT 512 and the code file called ADD_OPS.tar from the download.
5. Select Re-Partition.
6. Connect your phone to your computer via USB cable. Wait for com to come up in ODIN.
7. Flash the Aussie firmware.
Wish you luck my friend.
no no no... i CANNOT OPEN SGS AT ANY MODE..
It seems sgs don't have the battery... i cannot charge the phone ..
ososos, unfortunately it sounds like a full brick to me. I think there have been about 5 occurrences of this (myself being one of them), one guy managed to get his to power on my holding home + volume down + power and inserting the battery whilst these buttons were being held.
However as a general rule if your phone won't even turn on you'll need to send your phone off for repair.
Hmmm try using some friend's battery if he too has SGS... Or try charging only the battery at optus.. GL mate..

[q] odin3 help!

I have a samsung i9000 with stock JF3 and had rooted and lag fixed it but was having problems downloading apps, paid at first then all downloads begun to fail.. Anyway I tried to use ODIN3 to re-flash the original firmware but to no avail!! I took the battery sim card and sd card out put the phone in download mode, Then started odin3 and connected the phone. Odin3 can see the port but just stays on analysing files... Have then disconnected and tried over and over and over... so many times I don't care to remember. It never gets passed the analysing files. It did fail twice, but that was something to do with samsung kies stealing the COM port (I think!!). Anyway thought I would try and update the firmware through samsung kies. But just get the unable to upgrade this firmware. Which I'm surprised at as most seem to have the option think its to do with my firmwares but not sure.
If anyone could shed light on this also it would be much appreciated!!
Code XXJF3, Modem XXJF3, CSC XENJF3
Anyway to the point of this topic. I Now want to just flash the new Firmware myself but am wondering, If I could not connect odin3 to re-flash the original firmware... Am I going to have problems re-flashing with downloaded firmware! Am thinking there's a great chance of bricking my phone. Doing it all in the correct order so dont understand why it wont connect!!!
Also is there another way/program I could use to flash my device???
You could try using Samsung Kies to install the JM1 official firmware
lokhor said:
You could try using Samsung Kies to install the JM1 official firmware
Click to expand...
Click to collapse
I did... I also wrote that in the thread!! Where I said it cannot be upgraded through kies!
Disconnect all usb devices except mouse and kb and try again. Best to use windows xp. A powered usb Hub helped me too. I think sgs drains too much power from usb ports
Sent from my GT-I9000 using Tapatalk
ickyboo said:
Disconnect all usb devices except mouse and kb and try again. Best to use windows xp. A powered usb Hub helped me too. I think sgs drains too much power from usb ports
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Thanks I shall try that!, got lots of USB's plugged in... I am on xp... If this does not work though, is there an alternative to ODIN3??? or am I stuck on stock JF3... As that would be unbearable.. no samsung update and cant do it myself!!!! I have noticed a few of the senior members do live in Holland, so I shall put it out there that if one of you nice dutch fella's who know's what your doing wouldn't mind having a look at my sgs for me I would be very much greatfull! Holland isn't the biggest of places so I would be willing to travel.... Thats how much I wanna get this sorted!!
Subject Solved
Well I have found the answer!!... Well for me anyway!
I was following the information everywhere as to how to put my SGS into downoad mode!: Volume up + home + Power button... I was assuming this was correct as it was loading up with an android menu with the following options: Restart phone, Update via update.zip, restore to factory settings. I thought while in this I was in download mode. No I wasn't!! LOL... God knows how many times I was trying to connect odin3 and to no avail. I have now found out if i press volume down + home + power button... walaaaa A big green android man doing what appeared to be some digging (Didn't stay on screen long) also with DOWNLOADING in huge green letters... I am now assuming this maybe download mode and I will have better joy attaching my SGS to odin now... If I am wrong someone may slap me in the face with a giant swordfish and leave me for the rats!

How come the screen is just white when i turn on captivate

I superonelick rooted. Then i downloaded ROM Manager and flashed CWM. Then i returned to stock using ODIN 1 click. It failed.
Now when i turn phone on it just shows a white screen and nothing else happens... i can't find problem anywhere else on google. I've rooted many captivates but never had this problem! UH-OH... Help please
the same thing happens whenever i try to boot into recovery and into download mode...
You are gonna need a JIG. Check mobiletechvideos.com to get one or u could make one urself.--see this for homemade jig... [HOWTO] *Layman's iGo Jig* [Solderless]
Which One Click Odin did u use ??
i used I897UCKH3_withBL
i used it the night before and did the exact same procedure with no fault... i didn't do anything differently...
If u can't get into download mode by pulling battery/ replacing battery and connecting the micro usb to the phone, having already connected the usb end to the computer... then u r gonna need a jig.
And a friendly fyi, once u flash Gingerbread firmware that contains the Bootloaders, there is no need to flash a firmware that contains GB Bootloaders again if u are flashing another or the same Gingerbread firmware... or even going back to Froyo or Eclair for that matter, because the GB Bootloaders are backwards compatible.
i pull the battery. press both volume buttons, plug in usb chord to phone (already plugged into computer) then put in battery. The phone screen turns on (all white, blank screen)
I've seriously done this with 5 captivates... i've never had ANY issue... and now this happens. I'm so confused.
Do u remember or can u still see on the Odin where it failed ?
Either way though, u r gonna need a jig.
But on the plus side, it is not hard bricked.
Yeah i just did it out of order... ugh...
well this sucks, cuz it's someone elses phone and it's 9pm on a sunday night... I don't know what to tell him, lol.
Once u get or make a jig, then just flash the KH3 that contains NO Bootloaders 1st, that is, if that is still the base u want to take the phone to. This should get the phone working, if the Odin failed after it had already installed the GB Bootloaders.
good grief... i still can't believe this has happened... I guess i'll just give him my phone to use... i'm never helping anyone else again with their phone. I don't want to be responsible for this crap.
Can i just take his phone to AT&T store and get a new one (it is only 2 months old)
i mean are there any other ways to try and get the phone to do SOMETHING? I mean it turns on....
Jig is ur answer.
If it turns on still its fixable if you tried download mode and the screen is all white does odin still see the phone??
Sent from my I897 using XDA App
odin does not see the phone.
As others have mentioned jig is your only option at this point, but easily fixed none the less
Sent from my I897 using XDA App
okay well i just bought one. I'm really short on time to make one this week. So it'll be here tomorrow or wednesday.
what are the actual instructions once the jig comes in? I just plug it in and it goes into download mode? Then hook it up to computer and ODIN. (which odin do you recommend for cognition, or do you recommend another OS? )
Search, man, search.there are dozens of threads that answer this, and all the questions you've had.
You may also want to try one of the heimdall one-clicks, especially if ODIN isn't working for you.
i appreciate that. I just wanted the opinions of forum members that i respect. (i know there are a lot out there who are worthy of it as well.) So i figured while i had one's attention, i would ask
There is nothing wrong with asking questions, but you can learn more by searching for one answer than asking 10 questions.

[Q] soft bricked ! maybe...

Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.
vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.
mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.
firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Try a different USB cable?
Sent from my SPH-D710 using XDA
izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

Categories

Resources