Anyone!!!
Please help me, i'm entirely in despair now with my HTC N1 phone.
This place or people from XDA are my only hope, and I wish was in the right place.
Here's my concern, At the first place my POWER BUTTON is not working.
I Installed CM7.2 on my phone and it went great, I decided to install a semi-transparent status bar so I flash a .zip in it. After it reboots, it was stuck at the "X" screen.
The only thing I can do is to have a battery shock on my phone while holding the track ball, and it sends me to a white screen with skating androids.
From there I tried using the Fastboot commands but I got an error saying "FAILED <remote: not allowed>"
I'm pretty sure that "USB Debugging" is checked. And I can even erase the cache from there, but when i tried the "fastboot flash recovery file.img" or any related command like that it says "FAILED <remote: not allowed>".
When using ADB commands my phone wasn't detected. I tried all kinds of USB drivers and trick already, but got me nowhere.
Also I've seen that you cannot use ADB on a white screen, how am I going to get to a non white screen if my power button is not working?
I'm entirely helpless right not. I already went to different best cell repair shop all over our country to fix my power button, since it was the root cause of my misery but even them can't help me with that.
Please help me everyone, I'm a complete noob or even a moron on this.
I'm completely helpless right now.
I'll do anything for someone who'll help me. PLEASE!! :crying:
emeryreme said:
Anyone!!!
Please help me, i'm entirely in despair now with my HTC N1 phone.
This place or people from XDA are my only hope, and I wish was in the right place.
Here's my concern, At the first place my POWER BUTTON is not working.
I Installed CM7.2 on my phone and it went great, I decided to install a semi-transparent status bar so I flash a .zip in it. After it reboots, it was stuck at the "X" screen.
The only thing I can do is to have a battery shock on my phone while holding the track ball, and it sends me to a white screen with skating androids.
From there I tried using the Fastboot commands but I got an error saying "FAILED <remote: not allowed>"
I'm pretty sure that "USB Debugging" is checked. And I can even erase the cache from there, but when i tried the "fastboot flash recovery file.img" or any related command like that it says "FAILED <remote: not allowed>".
When using ADB commands my phone wasn't detected. I tried all kinds of USB drivers and trick already, but got me nowhere.
Also I've seen that you cannot use ADB on a white screen, how am I going to get to a non white screen if my power button is not working?
I'm entirely helpless right not. I already went to different best cell repair shop all over our country to fix my power button, since it was the root cause of my misery but even them can't help me with that.
Please help me everyone, I'm a complete noob or even a moron on this.
I'm completely helpless right now.
I'll do anything for someone who'll help me. PLEASE!! :crying:
Click to expand...
Click to collapse
You don't need to flash the recovery in this situation. Try to reboot the phone via fastboot command and issue these commands in fastboot:
fastboot erase system
fastboot erase boot
fastboot erase userdata
fastboot erase cache
Once complete, just reflash the CM 7.2 ROM again.
Hello,
I tried to install the new andoird wear 5.1.1 from this guide: http://forum.xda-developers.com/g-watch-r/general/install-android-wear-5-1-1-to-lg-g-t3114528
and after step 4 i close the "fastboot flash system system_gwr_5.1.1.img" before the install is done (i wait an hour and nothing append).
And now i stuck on the LG logo.
I tried to install again by the guide, but i cant use fastboot, it's write "wating for device".
What to do?
Thanks!
Edit: now the watch reach to the Android system but I have problem with the touch screen that not response. And because of that I can reach to the bootloader and the recovery mode...
Try to hardreset the watch. When you start your watch up and see the LG logo wipe fron 11 to 4 accros the screen.
Genna7 said:
Try to hardreset the watch. When you start your watch up and see the LG logo wipe fron 11 to 4 accros the screen.
Click to expand...
Click to collapse
The touch screen doesn't work after I tried to update the Android wear.. So I can't go to the bootloader...
Someone? Please help!
I am willing to pay to the person that will help me find a solution.
Please help!
Have you figured this out yet?
Spyderekz said:
Have you figured this out yet?
Click to expand...
Click to collapse
No. You also have this problem?
There is a lot of people with this problem in this forum...
Someone know a place that specializes in android wear watches? (please send me, no one knows how to solve this problem here )
try the adb command "adb devices" and "fastboot devices"
I don't think the first one would work (because you are in fastboot mode), but the second should tell if the pc "sees" the watch!
I had to manually install the "android adb composite" device driver in the win device manager...
TML1504 said:
try the adb command "adb devices" and "fastboot devices"
I don't think the first one would work (because you are in fastboot mode), but the second should tell if the pc "sees" the watch!
I had to manually install the "android adb composite" device driver in the win device manager...
Click to expand...
Click to collapse
The computer does not recognize the watch at all...
same here
well, same here: no touch screen, device is not recognized (but boots up to welcome screen) => not able to get into bootloader. Guess, I have to activate developer/debugging mode in the Wear-settings to get it recognized. But how, without touch? Any ideas?
So do you think there is hope for unbricking the watch R from that state ? (mine is the same)
Maybe LGFlashtool will work ? maybe TOT firmware file will be available ?
I am having the same issue after trying to install the stock rom, probably a wrong rom. The watch boots onto a lg logo, stays for a minute or so and reboots into a a boot loop. There is no way to access bootloader or fastboot. Swipe to enter bootloader does not work, tried hundred times, it is like the screen were unresponsive. I have no idea what to do, seems it is bricked.
If I keep pressed the physical button then reboots but lg logo again after a long vibration. Drained the battery, put it on the cradle and then boots onto the lg logo.
anyone?
anyone here has found a solution for this issue?
I am also in the same situation. LG logo stuck after installing a new rom, unresponsive screen no mather if connected to the charger or not. Tried with different computers and OSses, the watch is not recognised.
had this problem as wrong I used the wrong kernel, but I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
Link to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this help.
johnnyle7 said:
had this problem as wrong I used the wrong kernel, but I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
["h**ps: //android. googleapis.com/packages/ota/lge_bass_bass/7252d535d6a18047daaf3bfd4745f1c86ef7e7f1.signed-bass-ota-2576000.zip"] to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video ["h**ps: //w*w. youtube.com/watch?v=ZmBY9KM1NE8"].
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this help.
Click to expand...
Click to collapse
There is no way to put watch into bootloader mode since screen does not respond.
jogo said:
There is no way to put watch into bootloader mode since screen does not respond.
Click to expand...
Click to collapse
did u watch the video in one of the posts above?
johnnyle7 said:
did u watch the video in one of the posts above?
Click to expand...
Click to collapse
I did. The screen does no respond to touch so 11 to 4 does not work either. I hace tried hundred times and even tapping with 2 fingers which I have seen working in any other vídeo around
same over here.
And this happened without tryng to hack anything (for once in my life)
any update?
Today i unlocked the bootloader and installed AOSIP rom but i decided to revert to stock rom and flashed it( version c26). Then i checked i was on stock recovery. After confirming i was on stock recovery i re-locked the bootloader from fastboot command. After that the phone has gone into loop. It restarts continuously displaying the message "The current image(boot/recovery) have been destroyed an can not boot. Please flash the correct image or contact customer service to fix it". Since i can't get into fastboot mode/bootloader (pressing volume down + power key does nothing) i can't do anything. So if anyone know the solution please help me.
Note: my Computer recognizes the device if i press all three buttons simultaneously( i get device connected sound ).
Bro in the same boat, atleast you get the message saying boot image destroyed, in my case, phone keeps restarting and realme logo flashes
I read thread on gsmmafia that one can help to unbrick for money.
I can't put the external links due to xda policy, write me in direct message
Helg1002 said:
I read thread on gsmmafia that one can help to unbrick for money.
I can't put the external links due to xda policy, write me in direct message
Click to expand...
Click to collapse
Yes he solved it...
How?
Milan-XDA said:
How?
Click to expand...
Click to collapse
He recovered my phone today, CN version. He will provide the tool and image files and use TeamViewer for remote access to enter the username and password. It took approximately 15 minutes to finish. Contact him via his website -
https://www.gsmmafia.com/relame-x2-pro-rmx1931-flash-file/
Hey guys
I have this old phone that I would like to give to my friends young lad for him to show off to his friends and possibly play little games from the play store on it. However it is in a constant bootloop and I can't get it past the HTC logo. Sometimes, on its own, it will show the O2 logo, but then back to the HTC. The only way to break this is to pull the battery.
I have tried recovery in the boot menu (power + vol down when booting up), but alas, I get a red exclaimation mark and I can go further!
If anyone can help so I can get up and running with a fresh lick of Android on it, you will forever in my debt!
Hello.
Follow the guide on how to root and unlock bootloader for this phone. Have a ROM or backup on the phone ready to connect to ADB then use the command "fastboot oem relock" or "fastboot oem lock" in fastboot. Then download and run the HTC RUU program. The bootloader will be relocked and the phone will perform stock.
anyone please help...
I tried downgrading my nokia 7 plus TA-1046 ,unlocked boot loader..
flashed the file "Nokia_7_Plus_TA-1046_132E-0-00WW-B07_17032018_NB0" using OST tool ...
the process was complete but I end up with a white out screen no response to ..when I hold down power button it restarts with a boot vibration to end up in white screen...till the battery dies... only useful as a screen torch...even it is not going to edl mode or boot menu..restarts the light..
when I connect to the computer it shows a fastboot device under adb interface..but no com port..so I end up with empty result on 'fastboot devices' command so no tool is helping me..
I still want to try as a fastboot device pops up whwn I connect...
does any one have any idea about my situation...
please do help me... any suggestions or ways that I can still do ...
i'm in badly need of a mobile..