Hello everyone, I have a problem with my nexus one, after replacing the flex cable (power-on problem) the screen will not turn over '. I disassembled and reassembled, but without any results, what did I do wrong? I had already 'replaced the touch without any problems.The phone works perfectly except the display
thanks to all
Orx
I would take it apart and follow the ifix it tutorial to make sure you have everything connected correctly.
thank you but I disassembled mounting three times its original flex. it is strange that with the new flex power LED was flashing the camera but still no power on the display.
If you have any ideas, thanks!
How did you fix? I have the same problem.
Related
hi, so i was using my phone fine one night then the next moment it went completely pixelated. I tried turning it off, reseting it, charing it, it simply wouldnt work. I read somewhere it was probably the flex cable so i ordered one online. While i was in the process of taking the phone apart i realized that the new flex cable does not include the front facing camera. I took the camera from the flex cable but it simply seems to be glued on there, i have no idea how to attach it to the new flex cable. Any help would be great thanks.!
Hi everyone, I have one serious problem with my LG OB P970, phone working but LCD don`t work. When someone calling me, phone ringing, I hear sounds when connect to charger or connect to computer.But when I turn on phone, LCD not working, only buttons lighting. I tried with other screen, but still have a problem. Also tried update (with LG smart flash tool) and everything it`s ok, flash is successful, but again no lcd. Backlight working (when phone is On, LCD is dark grey because backlight light, PDC connector on motherboard also it`s ok. I hope that someone can resolve my problem or have any idea. Thanks
Hello Everyone!
So i'm really stuck over here. I have an international Samsung Galaxy Note N-7000 that is working but with a black screen!
First of all i want to discuss exactly what i have done:
1.i had a problem with the charging port where it works sometimes and most of the times doesn't. So i decided to order a new charging port to replace the existing one.
2. When i received the new charging port i instantly started to dissemble the device (The device was working perfectly before starting replacement)
3. After i removed the old one and installed the new, i turned on the device and it showed only a black screen, then after some time i saw the touch buttons light, but still the screen is black:crying:
4. so i decided to return back the old charging port and this time when i turned on the device it sounded like it's booting and working but still with a black screen. The phone even received call and the touch screen is working but with black screen.
What do you guys think has just happened to my phone? could the new charging port cause any problems with the motherboard?
i'm really stuck and don't wanna go to a service center
I have recorded a video of the problem. Please see it below
since i'm new over here, i'm not allowed to post youtube link.
please head to youtube and type my username and watch the video : nadeaa0a
thank you very much
My younger brother always liked to disassemble things with a hammer wondering after why it wasn't possible to assemble it the other way around.
It took him a few years to understand that real knowledge of things is a clear advantage.
Go to a service center and get help from a professional instead of making it ...
Sent from my GT-N7000 using xda premium
maybe you disconnected the wire you were changing ports ! don't worry and don't freak out just take to any shop and they will check it i don't think the screen is burnt because if it was it would be more expensive ! go to any shop and ask them to change ports and check the screen
for what you described, my best guess would be either you unplugged the lcd and didnt plug it back in properly.... or you damaged the flex for the lcd... the charging flex wouldnt cause the problem... just inspect the lcd flex and plug for damage... if no visible damage plug it in again and try it again... lets hope its just not plugged in right...
I have the same problem
Hi,
I have the same problem. I had never disassembled my phone and the screen slowly turned purple and started blackening out. It was fully functional. This I knew because I connected it to my Windows 7 computer and used Android Commander. I ordered a new screen complete with bezel etc. I have two batteries, the first didn't even charge after I put it in the phone (it had drained totally during the wait for the new screen), the second was partially charged and allowed the screen to boot. It is however behaving like the first screen did before it went black, that is purple. I am sure I have not done anything wrong with the connections. Could it be the batteries? or the adapter flex? I just hope it is not the mainboard. It is not on warranty and we don't have that many honest phone specialists around where I live. I am almost sure others have experienced the same problem and someone on xda knows what the problem is. If you do I would be indebted.
nadeaa0a said:
Hello Everyone!
So i'm really stuck over here. I have an international Samsung Galaxy Note N-7000 that is working but with a black screen!
First of all i want to discuss exactly what i have done:
1.i had a problem with the charging port where it works sometimes and most of the times doesn't. So i decided to order a new charging port to replace the existing one.
2. When i received the new charging port i instantly started to dissemble the device (The device was working perfectly before starting replacement)
3. After i removed the old one and installed the new, i turned on the device and it showed only a black screen, then after some time i saw the touch buttons light, but still the screen is black:crying:
4. so i decided to return back the old charging port and this time when i turned on the device it sounded like it's booting and working but still with a black screen. The phone even received call and the touch screen is working but with black screen.
What do you guys think has just happened to my phone? could the new charging port cause any problems with the motherboard?
i'm really stuck and don't wanna go to a service center
I have recorded a video of the problem. Please see it below
since i'm new over here, i'm not allowed to post youtube link.
please head to youtube and type my username and watch the video : nadeaa0a
thank you very much
Click to expand...
Click to collapse
it shows as color black, or nothing (like locked device)? I used to face this problem too with my infuse 4G, but it was because of installing custom rom. Had problem with few rom i installed but nothing happen on my stock one. If your device is just not lighting up(like locked device), then i guess because of ROM, but i'm not sure yet. But if it shows "color black", then i don't know.
THIS IS NOT A SOFTWARE BUG. Its the Screen flex or the ribbon. Disassemble the back part, and take a look at the flex or the ribbon connector of the screen, clean the conector with a tooth cleaner with alcohol and let it dry for a few minutes. Put it back on and mount the back part again. Test it, it should work.
Same thing here: changed the usb port, booted fine, had issues with the sim, turned off took it apart again to check, put it back on and black screen.
Yea having the same issue here, dismantling the usb module and put in new one, power up black screen!! The menu and back button did lights up, and the phone is working too, can hear the booting tone, anyone got any solution for that yet?
jasonhs said:
Yea having the same issue here, dismantling the usb module and put in new one, power up black screen!! The menu and back button did lights up, and the phone is working too, can hear the booting tone, anyone got any solution for that yet?
Click to expand...
Click to collapse
You damaged your LCD flex cable or didn't plug it in correctly ..
N00b... said:
You damaged your LCD flex cable or didn't plug it in correctly ..
Click to expand...
Click to collapse
I have unplugged and replug back few times, same result. Guess most probably i have damaged the flex cable. Replacement part seems too pricy to change, rather buy a new phone.
Sent from my GT-P6800 using Tapatalk
HI guys,
I want to post on behalf of a friend who has a problem with his Xperia Z1. He originally bought it used with a broken display, he then changed it with success, the phone was working fine until it fell. At this point the display was still working but not the touchscreen, so he ordered a new assembly from the net (not genuine, like the first one which worked tho).
Upon receiving his new assembly, he immediately started the repair. However, when he turned on the phone, he only felt the vibration and nothing appeared on screen. No any light, he got a totally black display with no sign of life, while the phone was fully charged, and was recognized by Windows (he could even access his files on the memory).
He obviously thought that the seller tricked him and that the assembly was defective but when he tried with the old one (which had the display working but not the touchscreen), the same result showed up, no light, like the assembly wasn't plugged to the motherboard at all.
So far that's what I told him, check the connections to the motherboard, and make sure the flex ribbon is not damaged. He even bought a new ribbon and installed it, with no success.
He read that the problem can come from the display ribbon touching the chassis, thus making a short-circuit, but I doubt it. How if the display connector on the motherboard is broken? Is it fixable? Like buying a brand new connector and soldering it.
Thanks in advance for helping us
Try a hard reboot by Golding vol + and power until phone vibrates. Is the backlight working?
N10AP said:
Try a hard reboot by Golding vol + and power until phone vibrates. Is the backlight working?
Click to expand...
Click to collapse
Thanks for reading this long problem
Sure, he tried the hard reboot thing, he even successfully flashed a stock ROM but nothing changed. I can only think of this as a hardware problem, but what part is defective?
The motherboard connector?
The ribbons on the chassis? But he changed to new ones already!
The LCD assembly? Same, the one he tried is a new one...
Still no one to solve the mystery?
I'd like to add that the phone turns off itself after approximately 30 minutes in idle state. That is, the explorer doesn't show the phone anymore and it has to be powered on again.
I know the best solution would be to buy a new motherboard or just forget about this broken phone, but it's a challenge to fix something that is apparently hopeless
Hey guys,
I've searched and tried seemingly everything, but can't find a solution to this problem. A few months ago, my cousin dropped her Z3C on the floor; the screen cracked and stopped working. I got and installed a replacement screen, but it doesn't work. When I first turned it on (after charging the phone for several hours), the display was off, but I could touch the screen and I would get haptic feedback.
When I do a soft reset (Vol Up + Power), it vibrates 3 times, but the screen still doesn't display anything. I've pressed the little yellow reset button next to the SD slot, which also causes it to vibrate, but the screen still doesn't work. When I connect it to a PC, it is identified, though no folders are shown in the device. After I used the repair function of the Sony Xperia Companion, I now no longer receive haptic feedback when touching the screen. I also tried using flashtool, but to no avail.
Can anyone point me in a direction with how I should proceed?
Thanks!
It may be a motherboard issue now,try taking the phone apart and reconnecting the screen,but don't close it fully just connect it and see if anything happens,if it still doesn't work it could be a motherboard issue or you got a DOA screen
Make jumper on fuze like I did on 2nd picture and should be fine. Pictures here.
Chamelleon said:
Make jumper on fuze like I did on 2nd picture and should be fine.
Click to expand...
Click to collapse
Unfortunately, soldering for me isn't an option.
I've looked into the price of a motherboard for the Z3C and it's pricier than I expected. I might just cut my losses and try to sell it as is.
Thanks for all of the suggestions, guys!