Database Develop

[Q] HTC Diamond Boot-Loop Help

I need some help with installing and trouble shooting my phone.
I've been following tutorial after tutorial on xda dev but I can't seem to get any of the roms working.
They all send me to an infinite boot loop.
I've got a CDMA HTC Touch Diamond
My Carrier is Telus
Bootloader SPL 0.57
I would say I bricked it but I'm not sure yet.
So far I've tried out mtty but I can't get my phone to hard reset. I probably don't know my terms due to the fact I'm new to the windows rom scene.
Can anyone help me via teamviewer?
Just to make sure I have everything set right because it would really suck to have to buy a new phone. :S

Chris9446 said:
I need some help with installing and trouble shooting my phone.
I've been following tutorial after tutorial on xda dev but I can't seem to get any of the roms working.
They all send me to an infinite boot loop.
I've got a CDMA HTC Touch Diamond
My Carrier is Telus
Bootloader SPL 0.57
I would say I bricked it but I'm not sure yet.
So far I've tried out mtty but I can't get my phone to hard reset. I probably don't know my terms due to the fact I'm new to the windows rom scene.
Can anyone help me via teamviewer?
Just to make sure I have everything set right because it would really suck to have to buy a new phone. :S
Click to expand...
Click to collapse
You must Upgrade SPL to HardSPL in order to you be able to flash any Diamond ROM to your device! This tool will then allow you to change the ROM language, flash cooked ROMs, custom splash screens, etc...

[Q] I have a question, help me

I have a problem with my device and around the web I can not find much support for it.
Please help me. I have an HTC HD7 t-mobile and I want to update it to NoDo European version. How can I do?
thank you

can someone help me?

up help me please =)

filoman said:
up help me please =)
Click to expand...
Click to collapse
What help do you want??

just install zune sofware on your pc, plug in your mobile phone ,ones your phone is detected. it will take you tru the update and installation.
thats how i got mine, london.

NoDo update
download and run and zune software on you pc, connect your hd7 phone to your pc once the system dictates your phone, it will take you tru the update and installation process. thats how i did mine in london t-mobile....

Guys, I think he has a US T-mobile HD7 and he wants the Euro ROM on it instead of the US one that the Zune might be detecting as soon as he plugs it in.
The only advice I can ask you to try is to first rollback to your previous restore point that Zune allows, and then use the process to debramd the device, via one of the threads in the stickies. Then download the Euro ROM of your choice and flash it via the bootloader mode.
The easiest way is, get a Euro device and sell this. LOL.
Sent from my HD7 using XDA Windows Phone 7 App

Head over to the HD7 Development section. Follow the instruction for unbranding your phone. Once you have the unbranded ROM flashed you can push through the unbranded NoDo ROM.
Beware though, M$ has put out some notices about "jailbroken" devices and their ability to update in the future. Not saying its going to affect anything, just always good to read before jumping in. The more you know...

thanks for the replies, my problem is that I don't also know how unbranding my phone. I only know that my CV is 531.
can you link me please?

Problem installing HTC HD7 HSPL / RSPL

Hello to all ..
My problem is that here ..
In a few words I wanted to install in my HTC 7392 with node HD7 SPL Bootloader 4.5 and unlocked the rom modified mango ..
but before you do anything, I had to install HSPL / RSPL in my HTC HD7 ..
I downloaded the "DFT_XSPL_WP7FG1"
I followed a guide ..
MAH reached the point of selecting the SPL, the list of the program reached only up to 3.4 ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
so going forward I get an error in the program where it was impossible to go on ..
So I unplugged the HD7 and I tried to do it again ..
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
I already tried to do the backup but nothing = (..

What does the spl screen say when your in bootloader?
Sounds like you have the 4.xx version.. If that's the case you need to flash an official nodo rom first. The hspl doesn't support spl's 4.xx yet.
Sent from my HD7 T9292 using XDA Windows Phone 7 App

crazysax1 said:
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
Click to expand...
Click to collapse
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.

But you have to worry about?
What are the consequences?
Is serious?

crazysax1 said:
Hello to all ..
My problem is that here ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
(..
Click to expand...
Click to collapse
you didnt read the instructions that are in giant bold letters all over those threads...you had spl 4.5 and tried to install the hspl. youve unfortunately half bricked your phone and currently it looks like it may NOT be fixable at all. try the gold card method listed above, i havent done it or read the thread but briefly but it looks like it may be a work around. unfortunately tho youre phone is BBQ'd.

sh4d0w86 said:
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
Click to expand...
Click to collapse
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)

alessio81pa said:
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
Click to expand...
Click to collapse
i honestly have no idea how goldcard method works.
haven't had any experience with it.
you may message the individual who's post i linked to and ask them.
sorry i can't be of more help.
sh4d0w86.

Half bricked possibilities
Hi friends. Do you really know anybody, if goldcard, Zune HTC update, JTAG or something another can solve hb problem? I am also in the "warnings late reading ignorants" club from last weak. But, I got a reply from a single "Half Bricked repairing" service near of Central Europe (GSM-TechNix.de): "Dear Sir, HTC 7 Pro is no Supported by JTAG! Sorry we can not help for this Phone." I have a little idea - to replace only internal information about bootloader version (I have no info on tricolore, but 3.2.2250.0 in Settings/about), connect to Zune and replace HTC update, if it is depend by this number. Is it possible? I have unlocked phone with pre-nodo (older backup has deleted by Zune), then HTC debug application or some homebrew features for values writing can work.
(From another forums:
_________
"Just updated my half bricked phone(bootloader problem) via Zune with HTC update for Windows Phone and the bootloader hasn't been fixed, so our only chance is with XTC Clip or DFT to come with a solution
Actually I got the same problem using an HTC Trophy A1 Version."
________
"For now your/our phone(s) are half-bricked. But as soon as a new update is available - including a new Radio Version everything will work fine again. Had the same problem when debranding my phone. After updating to 7932 via Zune everything was fine again - until I applied the leaked Mango Update.
So again - be patient "
________
"If your device is halfbricked you can use the goldcard method to recover your phone. If it's full bricked you need to make a jTag."
________
"Goldcard cannot repair halbricked WP7 phone."
________
). Thanks for replies, sorry for my english. M.

[Q] HD7 bricked during update

customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as ;
PD29*** SS-BC(4K)
SPL -5.11.2250.0(134400)MNG
sd sandisk 15193MB
partition info-v211v413
F400
but it doesn't shows "serial" and it doesn't connect to pc.
what should i do,pls help

If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.

Evo4eva said:
If you're telling people that you can fix their phones, then you need to be able to fix it without having to come to a forum for help. Especially if you're charging for this service.
Click to expand...
Click to collapse
thanx for your reply,as i have never challenged u or my customer that i can repair any handset that i have recieved.i have discussed here the fact that its the customer's fone.and your reply is not to the context.Just read my problem and u have any solutions pls advice for the same if not just go to other post.

hi majeed
i have read in another post, that someone else has had the same problem...no seriel or usb on screen, dont worry about it.
once in bootloader just plug phone to pc and do what you have to do...still worked for them.
cheers and have a gr8 day

Thanx bro for reply but i have tried connecting in same condition to different pc's but i get error :260

not sure what your trying to do after you are in bootloader??
you have bootloader 5.xx
therefore you can only install same stock rom or find same but earlier rom to downgrade ur hspl. must be same region too.
cheers and have a gr8 day

Hi jhonny,
i tried to downgrade bootloader according to tutorial of ansar and his rom found somewhere in this forum and got hspl and rspl.first i tried to use rspl of dft but i could not succeed and got an error and then onwards no "serial" in boot loader screen and the result not at all connecting to pc.tried again resurrectin with riff but no use.

majeed said:
customer brought HD7 in dead condition he told that he was updating the device and due to low batt it gone dead,no power and no boot mode.so i resurrected in riffbox.now it's hang on htc logo and when in bootmode it gives the info as...
Click to expand...
Click to collapse
hi majeed, is the unit still under manufacturer warranty

HI MAJEED...
WHAT EVER I UNDERSTAND THAT YOU HAVE HALF BRICKED YOUR DEVICE.
YOU CAN ONLY REPAIR YOUR DEVICE USING GOLD CARD METHOD.
http://forum.xda-developers.com/showthread.php?t=893152

[Q] HTC HD7 Bricked

Hi, I have a HTC HD7 and is being bricked for a while now, I went to a couple of shops to see if they could fixed but none of them did.. So I would like to know if someone here could help me and I would pay for it.. I live in Miami, FL and if someone is around here south florida, that can do it please let me know and get in touch with me.
Thanks,
Jr ritzer

See if you can enter bootloader,if you can u can flash a new rom using the goldcard method
http://forum.xda-developers.com/showthread.php?t=1295068

bootloader
hey sirajgoku, thanks for the link..:good: im going to try ur advice, but can u please tell me where to get a goldcard and another thing I just try to get the hd7 in bootloader and it got and it's showing me this "PD29110 SS-BC (4k)", do u know where can I find what that means..
thank u so much for everything.

The PD29110 is your devices MID (model id) There are a couple goldcard method tutorials available for hd7. Here's a pretty detailed one you can follow. you need a card reader, some USB cables to make a Y cable, easiest method Y cable (otg)
http://forum.xda-developers.com/showthread.php?t=893152
The hd7 is considered the Schubert, which you'll see in the tutorial.
Are you getting any other information while in bootloader mode, like bootloader version, OS or mico info?
If you found this helpful please click he thank you button!

no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.

Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
Ok, definitely bricked, but is it a small or big brick and it sounds like you have the big brick! Then the only other question is, can you enter USB host mode still and if so does your computer recognize it when it's plugged in? Press camera+volume down+power on, to enter in host mode.
If you found this helpful please click the thank you button!

Jr Ritzer said:
no more info in bootloader mode, it doesn't give me any version or os, just what I wrote before "PD29110 SS-BC (4k)".. when I turn on the phone it just stay in the htc screen and then vibrate like 7 times and that's it.
Click to expand...
Click to collapse
If you can get to BL mode then you should be able to get to USB HOST MODE. If you can do that PM me. I'm in Ft Lauderdale not too far and I'v goldcarded at least ten of 'em. If you can't get to Host mode next stop JTAG.

It will go into bootloader mode but it's bricked. Meaning there's only one line of information showing in BL mode which is the devices MID. If it will go into USB host mode there is a possibility of fixing it using the Goldcard method. If it won't go into USB host mode, there is one more possibility of fixing it besides using and having to resort to the Jtag/riff box. Using a cab and the cab sender, like the schubert 2250.21.50001.728 cab. Which if successful would upgrade the spl to 5.xxx and would added a few more lines of information to the bootloader screen but wouldn't repair it completely to where the serial/USB show up on the bottom line. However this should allow you to enter into USB host mode now and then you could use the Goldcard method and flash a stock/shipped rom for your devices specific carrier. This should repair the bootloader and should also downgrade your spl and OS version as well, depending on what version you flash. At this point you can update through Zune to the current OS version and mango. Then if you wanted to, you could use your goldcard to downgrade the spl and install rspl/hspl and flash a custom rom!