Related
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
this is another story of bricked Herald device
there's no solution for that you have to wait
halder said:
plz help me .after i try to hard spl my phone ( i did it wrong way) i am stuck in boot menu
i download several rooms but it give me error 300 and a message say get a newer update utility
my original room was ger and orange
where can i find such room plz help me
Click to expand...
Click to collapse
what part is it stuck on, the white screen?
Provide more information
hey bro, he's saying about error 300, pls get newer update utility
flash area is screwed so you may think in a customized ruu update to ignore cid check and get your phone on
my friend updated it he didint install the 3 cab before doing the ruu utility .he stuck in white screen for long time then ..we are in bootloader menu now...
error 300 is beyond my knolage
plz help how to custimize the ruu ..
i know how to do it for wizard but not for herald is it the same way or there another way ..
thank you in advance
htc p
ipl 1.08.0001
spl 1.08.0001
model hera100
bro.. error 300 means "supposed" you have to flash your device with a newer flash tool (newer? there's no newer utility!) so we have to find the way to recover OS part first- I think by recovering OS and booting up device again we can find a way to recover CID area and unbrick our devices
the problem is, nobody wants to help
jockyw2001 --> he's a great coder/programmer but he doesnt look for those areas
Olipro --> he didnt say a word about that. We're expecting hardSPL unbrick tool
POF --> no words too
so, these are the 3 great programmers here, but no words from them.
What can we do? I think nothing... Bcoz Im stucked in "Invalid Certificate" screen and no reply from anyone... I think the brick problem here is from everyone cuz we dont get any reply
Pls.. I know we get devices from several months ago.. I think we can get all opinions, suggestions, everything and get herald unbricker.. come on!
tramuyo.... while your answer is technically correct, theres a better answer.
From what i understand, he attempted to flash a custom rom via hardspl or USPL. This is a no-no if the SPL is lower than 4.
so for now my phone is bricked .
i tried to flash it with my original rom. still error 300
.thank you guy for u replay
the problem is, we need Olipro help to get our devices recovered. At least, recover OS part
true. maybe we can somehow lure him into the forum. let's assume he searches his name on a semi-regular basis (i do, but i digress)
Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro Olipro
thats probably enough
Olipro doesnt reply our messages. I think he have the clue to solve our problems, but i dont know why he doesnt want to publish it or something
can we start to donate for man who can solve this problem?
can we start to donate for man who can solve this problem?
i can donate 100$
me too
just help as we will do evey thing
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
i have also such problem. 1st i have make hard spl and write patched rom in to p4350. after i try 2 write oficial rom and got only boot menu.
as i understant the only solution 4 it is writing native rom on it but problem is that i dont know what rom was there before. my mistake . another problem is that hard spl works only in normal mode via instaling cab files and patching spl. so does exist hard spl 4 this model which is writing via boot mode or patching rom whithout cid checking?
I don't know if there's anything you can do, but try this. It hasn't been tried on the Herald, that I know off, but it's worth a try.
halder said:
till now my phone is in bootloader menu
no can do
but i heard that if i hard spl it it will work is it correct.
any idea
Click to expand...
Click to collapse
This is a wild guess, but if your able to get to the boot menu.
What about trying to download a micro rom and copy it over to your sd card.
Then perform a soft reset as you would to enable the boot loader menu.
I think it's worth a try.
has there been an update on how to exit from a tri-color bootloader screen?
I ran into this problem today and have searched for hours with no clue as to a way to resolve the issue.
I notice also that right before the tri-colored screen appears I see a flash of a white screen and I believe it says it cannot detect SD card... if that helps
I encountered this problem only after having flashed to the new 7.7 open touch and my phone no longer being recognized on my PC for activesync
problem (300) bootloader
I have problem the same. exists somebody that helps me? urgent
i have same phone hera100 and same problem still in tricolour display.how solve this problem
b.r
bahri
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.
Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked
Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?
If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.
many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.
Hi, I have been reading this forum for some weeks and I am thinking of unlocking my Touch 3G by using this Hard-SPL thing which is available here.
However I am still hesitating because I have never done such an "intervention" in the past, so please allow me to ask you if you did it and if yes if it worked without problems (from the thread I wasn't able to understand if more that 2-3 people have really succedded!)
Thanks, lila
I actually tried few times yesterday and today, but I am getting "Server is down" message .
i manage to solve it. how? i have exit my antivirus, then, go to control panel/windows firewall and put it on off, and will work. each time, i have install enablerapi.cab on device memory.
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
I've unlocked my Jade without any problem, but to be honest i didn't flash another ROM yet because i want to be sure i can go back to original one (just in case of waranty), and i don't know how to rebuild my dumped original ROM.
I'm still trying to figure this out, gonna succeed as long as i keep reading this excellent forum.
Anyhow, flashing a new ROM isn't that difficult, but you have to follow the guidelines very well and keep on your reading glasses..)
Hi. I am very happy Thank you OLINEX. I have HTC 3G (Jade 100) I make HARD SPL and I install http://rapidshare.com/files/15981107...30.09_Ship.exe
rom. It is very good rom and stable. Now I have english language and my phone rings best. Thank you OLINEX.
fenikso said:
I disabled firewalls and antivirus software. I tried on three different computers with different (working) access to internet. Still no joy . I guess I will try later.
Click to expand...
Click to collapse
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
i did it with the first attempt with v3, no problem and i'm really happy
Hard-SPL
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
estancolaplaza said:
With hard-spl you will not unlock your jade . It´s only necesary to upload others roms to device.
Click to expand...
Click to collapse
Oh yes you are right, however that's what I meant; in fact I have a Jade with French ROM and I want to change it to English.
for me dont work the hard spl....
I've been trying for the past 3 days to Hard SPL my jade without any luck. always the phone restart without entering to tri color mode.
I even tried to exit the antivrus and disable the firewall but always same error.
Any suggestions here please?
fenikso said:
So, I finally got it to work. I will post my "story" to Hard-SPL thread .
Click to expand...
Click to collapse
Ca you post your story please maybe you can give us a little help.
Thank you
no luck with the one i tried, just restarts. dont know why this phone is so special, every other one ive done is so easy.
stock loader version is 1.40.707.2 tried using windows xp sp3 .net3.5, tried using hardspl v2 and v3 (tried v2 just in case that worked)
the link is dead!!
lots of problem, the HardSPL from Oli doesnt work, but the radio update from HTC works
keep trying and win
SPL does work. But you must keep trying. I got "server down"
and so on. After a week and hundred times try, I got unlocked the phone.
Now I can enjoy any wm6.5 roms. It is free software and not perfect.
But It does the job . well done Olipro and Cmonex.
Which phone do I have ?
My phone is supposed to be a Touch 3G but the processor is a Marvell PXA310 @ 624 MHZ.
The phone says it's a T3238, can someone tell me which phone I have please?
It's a clone I think.
When I boot holding the volume key I get a white screen saying USB update model
Hi,
I have a TOUCH 3G and I did the HARD-SPL. The better thing in here is that developers and always available to help you. For example, i had some problems doing hard-spl to my Jade but with the help of cmonex(developer) i've done it without any problems. You have a lot of support in here. SO, If I were you, I would do it.
it works like a charm
hi
Yes i did my HSPL today and it worked like a charm it was so easy and
i had a gene(P3400i) and the HSPL for this phone was so difficult
compare to the HSPL for Jade
the Jade HSPL took only around 10-15 mins
now i need to flash some cooked rom will do it today right now downloading ironegles ROM
Note : u need to off ur Firewall or it wont work OK
Hi there, I installed "RUU_Rhodium_HTC_ARA_1.19.415.1_Radio_Rhodium_3.44.25.27_Signed_Ship" on my phone, and now it is stuck on the reboot screen, and it keeps rebooting constantly. it won't boot anymore.
I tried to install a different Rom, and it still won't boot.
I tried the hot fix rhodium radio 3.46.
I tyried SPL loader. no luck
Any help is greately appreciated.
Do you have Hard SPL?
Have you tried re-flashing the stock ROM for your device, not just "another" ROM?
Dave
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
ericsson12 said:
yes I have, I tried both.
How I got it to work, is by using rollback SPL.
But now I can not load the Arabic ROM anymore
Because I used my 1 trial.
Is there any way for me to install the Arabic ROM?
Click to expand...
Click to collapse
Can you boot Windows Mobile? If not, can you re-flash your carrier's ROM (hopefully they have a Ship Exe) whilst in the bootloader (see the Rhodium wiki pages)?
Ta
Dave
Have you tried Mtty?
Mine got stuck at bootloader a couple of days ago, because my computer hang in the flashing.
Second time Mtty saves me
I am able to boot into windows now, but i am unable to load the Arabic ROm.
Help please
I've had something similar.
But my phone kept reinstalling itself every time it booted.
Now I know this was a diamond, but I think it might help.
Maybe someone else could look at this as well and give his opinion about it.
The thread about this case is here http://forum.xda-developers.com/showthread.php?t=493131
Hope that helps
i had this problem.. the only way that seemed to work with me is flash stock spl then flash rom.. once the rom is flashed succ run the arabic localization.. finish it n the re-flash hspl.. thats is the only way around it.. i think there's a conflict between the ara setup n hspl.. dont know if it'll work with u, but did with me since my device accepted the rom in stock spl.. hope it works for u ;-)
So my problem is - I put android on my htc tytn II and it worked (well kinda) but anyway I decided to switch back to Windows Mobile...
I installed 1.27.x.x radio , found a Windows Mobile 6 ROM and put (Like in the instructions ) Kaisimg.nbh(renamed from ruu_signed.nbh) and Kaisdiag.nbh to my SD card and then started flashing... It flashed smth,rebooted automatically and started booting android again...
Then I hold again camera button + power+ reset and since then when I put EVERY .nbh file on my sd card and try to flash it it STUCK on "Loading.." If I try to flash it with USB It stays at 0%.
The only exeption is if I try to flash from USB the rom that I tried to flash before from my sd card.. then it starts 0%..1% and reboot the phone...
P.S: Please help me...I think my device is not Broken but I dont know what should I do to fix it...
To flash back to WM from android put your kaiser into bootloader (multi colored screen) Then connect to usb. Download any WM build that is recent (I suggest Phoenix 3 for this, you can flash whatever you want later). After you download it open and run the included RUU that came with it and it will flash it on there.
hmm, I also had experienced the similar problem on my 1st time flashing back to WinMo.
When you are trying to flash via USB cable and the process stopped at 1% I guess there is also a message about "Invalid vender ID" right?
and if the text in your bootloader (tricolor screen) doesn't mention anything about hard such as "3.29.0000" (not "3.29.hard")
then
you've lost your hard SPL that's why you cant flash any .nbh to your phone.
I had managed to solve this problem by flashing stock WM rom for kaiser. The rom also has to be suitable for your phone, I mean if your kaiser is originally from France, then use French kaiser stock rom. Or if you are using AT&T Tilt use kaiser cingular stock rom.
you can find the list of shipped roms for kaiser here :
http://shipped-roms.com/shipped/Kaiser/
If you still have the "invalid vender ID" error message, try another stock ROM.
Thanks man you're my hero! I though I lost my phone.. anyway i bought new one - Nokia 2730 Classic but Ill sell the kaiser...
Thanks Anyway ... you're god!
Have the same problem...
Firstly, I'd like to point that the reason for the hard SPL getting overwritten by an original SPL is NOT HAVING UPDATED HARDSPL to a newer version that prevents accidental overwrite. This is instructed in the previous steps before actually installing Android. That was my mistake (I had HardSPL 1.0 OliPof), and now I can't flash no rom to my Kaiser (which thankfully works quite well in Android).
What happens (please correct me if I'm wrong) is that "KAISDIAG.NBH" is a modified, standalone hardSPL that will flash to the phone the SPL that comes with the "KAISIMG.NBH" you put in your SD card with "KAISDIAG.NBH"). In my case, I used the WinMo 6.1 spanish version 3.29.412.0, which, resulted in my phone being flashed with the original SPL 3.29.
Now, it seems many users have fixed this locating the correct stock rom and flashing it in their Kaisers. But to others, like myself, nothing seems to work. I believe that this is because we not only need a stock rom for our specific Kaiser model, but also it has to be compatible with the SPL that accidentally got installed in the phone. The problem is what if such rom doesn't even exists?
I'm really thankfull for all I learned by reading the forums (and from my mistakes ) and I know I'm in no position to make requests, but here goes what I think could help the users like myself to fix this, if posible:
1) Guide to identify what model of Kaiser we have (maybe it's already there, I just couldn't find it)
2) Complete list (or lists) of stock roms (There are some around, those are easy to find I think, but it doesn't hurt to share different sources)
3) Something like a JumpSPL for Android would be more than awesome...
Thanks in advance to everybody, sorry for my own stupidity . Any idea or help would be much appreciated,
Daniel
hmm, I'm not sure if it has to be compatible with the SPL.
In my case, I was flashing a very old WWE stock rom which has original SPL 1.56.
I also had been very desperate because any stock rom I found seems doesn't work and I even didn't know where originally my kaiser came from because I get it from my uncle. So I tried to flash any WWE stock rom I could found but nothing works. I read from Wikipedia that based on my phone model (Kais100), this model was only sold as AT&T tilt for US. But the problem is my phone is HTC branded, not AT&T tilt. Well, based on this information I also tried to flash some cingular stock rom but the result was just the same.
After contacting HTC Customer care, I know more info about my phone. They told me that based on my phone product ID, my kaiser was originally shipped for US, but unfortunately they can't provide me stock rom for my phone model. So I searched myself but this time I had better objective : to search HTC branded rom but for US.
finally, after days of search. I've found the rom that is suitable for my phone. Its called HTC WWE Brightpoint US which has original SPL 3.29 at the bottom of the list on the website I told you on my previous post.
few weeks ago I also accidentally overwrite my HardSPL again, but this time I did it with the stock ROM which has original SPL 3.29. But this problem also solved by flashing the stock ROM I've found before via USB cable.
So, I guess it has nothing to do with spl version.
Keep tying don't give up.
Update: Step 1 completed! YAY
Using the serial number and some obscure google searching, I came to the conclusion my KAIS130 is australian. Cheers, mate!
I verified this by being able to download stock roms from the australian HTC site with my Kaiser serial number. But at the moment of writing this, have downloaded two roms and no luck yet. 5 minutes remaining for the third one... Wish me luck...
Daniel.
Well... Now what?
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
cuartetoraro said:
Tried all four rom-like thingies I could download on the HTC page, all of them returning error 294...
Now what? try to somehow extract the .nbhs from the exes and and use customRUU.exe? Try to flash from SD card?
Please help... Any ideas... I really want to get rid from that original SPL3.29.0000 It's evil!!! I think it won't never let me flash again.
Thanks,
Daniel
Click to expand...
Click to collapse
sorry to hear that..
well, extract the .nbh from exe and flash it via sd card is the method that made me overwrite my hard SPL in the first place.
hmm, did your phone comes with operator brand, such as three or something?
-Rif- said:
sorry to hear that..
hmm, did your phone comes with operator brand, such as three or something?
Click to expand...
Click to collapse
No, it's HTC unbranded. Now, something strange here: the label behind the battery has the serial number: HT830GB06075 and the P/N (guess it's part number) :99HCY194-00, but to the left of the camera, another label with the part number: 36H00563-00M and below says DATE:061107(TB02)/US.
I don't know if that's normal, but it caught my atention because my phone seems to have been dissasembled (little label over screw is teared). Maybe my Kaiser isn't Australian after all...