SOLVED -- [XT860] Softbricked, Help... - Motorola Droid 3

So I'm a bit of genius and decided I'd try to fully fix my 99% functional phone and have now made it so it won't boot into home screen... I believe I corrupted blur-services.apk and/or blurcontacts.apk, so I get greeted with a series of crash screens.
What I did? I copied over some Bell XT860 system files (including blur-services.apk) from a system dump in Root Explorer, which caused a crash in the middle of copying. After rebooting the phone, it won't properly go into home screen. I tried a system recovery with no luck, oops.
So I'm hoping/assuming that copying over blur-services.apk properly through ADB might solve the issue, but I can't get into ADB on my phone. I've tried using bp-tools & psouza's tool for temp ADB rooting, with no luck -- it won't pickup the connection, even though my phone's storage is available on my computer and clearly connects. Granted, I might be missing a step somewhere...
If someone could guide me into getting into ADB, I can push the blur-services files properly and hopefully regain control over my phone again...
I must say... if I can get this phone operational again, I will stop messing with it!
Two issues...
1) I could use a non-corrupted copy of each of these files [along with their respective odex files]...
2) I can't get into ADB on my phone. I've tried using bp-tools & psouza's tool for temp ADB rooting, with no luck -- it won't pickup the connection, even though my phone's storage is available on my computer and clearly connects.
I must say... if I can get this phone operational again, I will stop messing with it!

Update:
Luckily for me, I was still able to access my gmail and launched Android Market from there. This allowed me to download Go Launcher, GO Contacts, etc. and at least restore functioning to my phone. Most importantly, this enabled me to check off USB debugging (which I lost when I foolishly reset my phone).
So now I've got a semi-functional phone that gives me error messages at least every 30 seconds about one of the .com applications closing.
However, there is hope that I can get her fully functional since I can now obtain ADB access!
---------- Post added at 02:08 AM ---------- Previous post was at 01:44 AM ----------
Sweet, after being able to check USB debugging, I was able to save my self again using psouza4's tools and guidance.... I really have no idea where noobs like me would be without his help!
Main Lessons:
1) Don't play with your phone too much without a proper SBF
2) If you're like me and can't resist, DO NOT FACTORY RESET YOUR PHONE. This only makes the problem worse.

Related

[SCRIPT] GladRoot v4.3 (Bell 0.37.4, AT&T 1.26/1.52/1.57/1.83 Supported)

Note to all users: This thread is now closed. I will no longer be updating GladRoot as there are more reliable and simpler methods for obtaining root on the newer firmwares. Support can still be found through PM for the older firmware versions.​Note to all users on non-AT&T/Bell devicesThis is currently untested on anything but AT&T and Bell phones. You can run this on any phone, and at the very worst, it just won't work. There's almost 0 chance you will harm your phone by running this, so feel free to try. Please report back what firmware version you tried it on, and if it worked or not and I'll update the first post here to reflect. I don't have any device but an AT&T Atrix so I can't test any of the other versions myself, I need your help!​GladRoot v4.3 (AT&T 1.83 Update Supported - READ DIRECTIONS)
In the interest of cleaning things up and putting all the current information into one place, with links to everything you'll need to get this working.
Basically, there's a ton of misinformation floating around about current root methods. This is your one stop shop for all your root needs. To explain, the SuperOneClick method installs busybox a second time. The Atrix already has busybox installed, so there's no need to install a duplicate. This can cause issues with other mods. GladRoot will take care of everything SuperOneClick did. I've contacted the developer to see if there's a way around this.
Start Here
If you have an AT&T Atrix and want to update to 1.57/1.83 with root, follow the first set of instructions.
If you have a Bell Atrix or an AT&T Atrix on 1.26 or 1.52 and just want to root, go to the second set of instructions.
Please, please, PLEASE, read the whole first post before asking questions. Chances are your question is already covered in the directions.
If you have any features requests or notice any bugs, please PM me, I might miss them in this thread.
To unroot, just run unroot.bat
Note to users seeing "Unable to detect device" error: Disable USB debugging, and turn it back on. Make sure your connection type is set to None. If you need the drivers, they are available here: 32-bit Drivers and 64-bit Drivers
Little bit of additional info here:
This will root your phone. There is no need to run aRoot before this, and you should NOT be running SuperOneClick anymore.
This has options to enable sideloading and the tethering APN. Enabling sideloading will not add an Unknown Sources checkbox, it will just enable it. I don't see any reason for the need to disable this, so unless someone can make a case for the checkbox (that makes sense for users), it will remain this way.
Unlike v1, the scripts are fully automated. You need only click "allow" to superuser when prompted for certain steps.
If you are already on 1.57/1.83 and do not have root, you MUST flash back to 1.26 for this to work. NO EXCEPTIONS.​
Installation instructions: 1.26 to 1.57/1.83
Read the directions.
Read the directions again.
Read the directions a third time. If you do not understand a step, ASK before starting.
Download the script
Extract the GladRoot folder and files to C:\. Do not install anywhere else. Having it inside a folder with a space will cause the script to FAIL.
Make sure your device is 1.2.6 and is not running any mods, I recommend a fresh SBF flash of 1.2.6. Download links and installation instructions here
Enable USB debugging (Settings -> Applications -> Development).
Connect your phone (I recommend setting USB Connection to 'None').
Run gladroot.bat and follow the on-screen directions (If you're using Windows 7, run as admin by holding down control and double-clicking).
Verify that there are no errors before updating.
Go to Settings -> About phone -> System updates
Follow the on-screen instructions. First download the update (you will need a Wi-Fi connection for this), then it will prompt you to install.
The update will reboot the device and install itself. If this part fails it's because you are not on stock 1.2.6 firmware. Start over and read the directions.
When it boots back up, verify USB debugging is still on. Some users report that disabling and re-enabling USB debugging solves a few issues with the script detecting your device (Settings -> Applications -> Development).
Run afterupdate.bat (If you're using Windows 7, run as admin by holding down control and double-clicking).
Make sure you allow the superuser request on your phone or it WILL fail.
All done! Enjoy your rooted Atrix on 1.57/1.83!
​Screenshots**REMOVED FOR NOW UNTIL I GET A CHANCE TO UPDATE**​Installation instructions: 1.26, 1.52 and Bell Atrix
Read the directions.
Read the directions again.
Read the directions a third time. If you do not understand a step, ASK before starting.
Download the script
Extract the GladRoot folder and files to C:\. Do not install anywhere else. Having it inside a folder with a space will cause the script to FAIL.
Make sure your device is the correct version. Go to Settings -> About phone -> Build number and make sure it matches one of the following:
OLYFR_U4_1.2.6
OLYFR_U4_1.5.2
OLYLA_U4_0.37.4
If you need to flash an SBF first, Download links and installation instructions here.
Enable USB debugging (Settings -> Applications -> Development).
Connect your phone (I recommend setting USB Connection to 'None').
Run gladroot.bat and follow the on-screen directions.(If you're using Windows 7, run as admin by holding down control and double-clicking).
When you get to the step that asks if you're updating to 1.57, just say no.
Verify that there are no errors.
All done! Enjoy your rooted Atrix!
​DISCLAIMER
I am not responsible if this bricks your phone or if it doesn't work properly for you. I've done everything I can to ensure smooth execution.
If you have any issues, feel free to PM me, reply to this thread, or come find me on IRC (I'm Fenrir or fen|works on IRC)​Special Thanks
Sogarth for adb wizardry, shawnbuck for the concept and getting the ball moving, designgears for the initial aRoot script method, and everyone on XDA and IRC who helped contribute and test.​Changelog
Version 4.3
Cleaned up script a tiny bit
Added textual support for 1.83 (the method hasn't changed, it's always worked)
Version 4.2
Added Uknown Sources checkbox to sideloading, as well as enabling it.
Added unroot script.
Version 4.1
Fixed a few minor aesthetic errors in the script
Version 4
Added a pause after the superuser request so if it fails, users can read the output.
Started mapping out log process for error catching.
Removed abd kill-server from the beginning of the file as I think it might be causing problems on slower machines.
Version 3
Removed option to root, it just roots. This will not harm your phone if you're already rooted.
Added support to root all devices, including Bell Atrix.
Cleaned up and improved script.
Changed name from Root v2 to GladRoot (Which is Root v3)
Version 2
Massive improvements to deployment script
Removed need to manually enter commands
Version 1
Initial Release
​
I love you guys lol!
So will this method (or the idea behind it) work for future updates (like the supposed ones for HSUPA, voice quality and one day eventually maybe gingerbread?)
Or do we have no idea about those?
Vigneshd said:
I love you guys lol!
So will this method (or the idea behind it) work for future updates (like the supposed ones for HSUPA, voice quality and one day eventually maybe gingerbread?)
Or do we have no idea about those?
Click to expand...
Click to collapse
I would assume so, unless Moto closes this hole? Not sure if this is a root exploit like psneuter or not.
Also flashing my phone 1.2.6 and will attempt this, will post back my results
So do this version allow sideloading?
awww yeahhh
PixoNova said:
I would assume so, unless Moto closes this hole? Not sure if this is a root exploit like psneuter or not.
Also flashing my phone 1.2.6 and will attempt this, will post back my results
Click to expand...
Click to collapse
Unfortunately, it is possible to close this hole, but I don't think moto is going to get it for a little while.
plmiller0905 said:
So do this version allow sideloading?
Click to expand...
Click to collapse
i assume so. i'm able to sideload
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync. I put the new retainroot folder in C:\.
Nothing works.
Have I missed something?
Any ideas?
drjim said:
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync.
Nothing works.
Have I missed something?
Any ideas?
Click to expand...
Click to collapse
open command prompt and type:
Code:
adb devices
What does it return?
drjim said:
After failing with the previous version, I failed again with this version. I get the screen shot below every time.
I installed JDK and SDK. I did aroot. I rebooted Atrix and my PC. I tried in None and Mass Storage. The Atrix is recognized by my PC as it is listed under Computer and connects with Media Sync.
Nothing works.
Have I missed something?
Any ideas?
Click to expand...
Click to collapse
USB debugging on?
USB mode set as None?
Ririal said:
open command prompt and type:
Code:
adb devices
What does it return?
Click to expand...
Click to collapse
I'm in C:\Users\My Name>
Is that the directory I should be in? If not, which and how to get there (I'm not great with cmd)?
shawnbuck said:
Unfortunately, it is possible to close this hole, but I don't think moto is going to get it for a little while.
Click to expand...
Click to collapse
So is this a hole that allows us to exploit another hole?
s0dhi said:
USB debugging on?
USB mode set as None?
Click to expand...
Click to collapse
Yes to both.
drjim said:
I'm in C:\Users\My Name>
Is that the directory I should be in? If not, which and how to get there (I'm not great with cmd)?
Click to expand...
Click to collapse
I changed directory to C:\ in cmd and typed in adb devices. Its response: List of devices attached.
Only thing I haven't done is flash SBF (whatever that is). But I'm dling it now...along with RSDlite (whatever that is).
Any ideas why I got all the way to the second command prompt with permission denied? I never got the super user prompt on my phone. Can I still put the phone in debug mode and rerun afterupdate.bat to re-root?
PixoNova said:
So is this a hole that allows us to exploit another hole?
Click to expand...
Click to collapse
This isn't quite a hole, just a little magic-show type trickery really.
tdamocles said:
Any ideas why I got all the way to the second command prompt with permission denied? I never got the super user prompt on my phone. Can I still put the phone in debug mode and rerun afterupdate.bat to re-root?
Click to expand...
Click to collapse
What do you mean second command prompt?
Failed backup?
OK, I'm on stock 1.2.6, said yes to already rooted and yes to side load and no to tether. It starts and says pushing backupsu.sh... then retval = and backup failed to execute properly. What am I doing wrong? I have developer on and usb = none. Can't seem to get it to work...
when i run beforeupdate i get backup failed to execute properly
am i missing something?

[Q] Help recovering data from Capy with mashed screen

I could use the help of you gurus trying to get some data off my phone since I sat on it yesterday and horribly mangled the screen. The screen wont come on but it sounds like the phone is still working. The screen also doesnt respond to touching it not surprisingly
Really all I want to do is get my texts off of the thing, but with the screen not working, and ADB seeming to be disabled, im not sure how to go about that.
Is there any way for me to:
A) Remotely enable ADB(im guessing no)
B) Remotely enable Wifi(so I can use an app that is already on my phone to control it from my computer)
Any help is appreciated!
BB
If you had a custom kernel on the phone before it broke there is an option in clockwork to restart adb you would just use up down vol buttons and power buttons. I will give you a Button sequence in a minute. Just gotta reboot my phone
[Edit ]
I just rebooted my phone and the dark core kernel does not have the option to restart but I do know some kernels do post what you are tuning and maybe someone else knows. Also there is the TV OUT option just plug into your tv and see if you don't get a picture maybe its on by default. Good luck(;~}
Sent from my phone on vacation
Thanks for the reply! I was unaware you could restart ADB from CWM. I am running Serendipity VII with the most up to date Serendipity kernel I will try to find out if they support it(if anyone reading this can look in CWM and give me the key sequence that would be so awesome)
http://forum.xda-developers.com/showthread.php?t=1107894
I thought about the TV out option but I would still be unable to input anything from the touchscreen so would be a bit limited with what I can do
Thanks for the assist!
BB
Baconbreath said:
Thanks for the reply! I was unaware you could restart ADB from CWM. I am running Serendipity VII with the most up to date Serendipity kernel I will try to find out if they support it(if anyone reading this can look in CWM and give me the key sequence that would be so awesome)
http://forum.xda-developers.com/showthread.php?t=1107894
I thought about the TV out option but I would still be unable to input anything from the touchscreen so would be a bit limited with what I can do
Thanks for the assist!
BB
Click to expand...
Click to collapse
The only thing I can think of, if find out where the texts live, ADB into the phone and pull them to your PC.
I use SMS Backup app, but if you don't already have it, it won't do you any good at this point.
You know, Maybe what you can try is a nandroid backup from ADB. You may be able to save the entire ROM and contents, then pull it from your device to your PC.
Also the key sequence for mount usb in recovery might be useful but you don't get access to system only the sd card.
Sent from my phone on vacation
That would be really helpful key combo too to get some photos off of it..and maybe Tibu backed up apps. Mental note: use google+ cloud storage for photos and video in the future
BB
I gave up on this for a while....but tonight I decided to give it a go again with results! Posting steps here in case someone else runs into this...
I took the phone full apart to see if there was any damage internally besides the mashed screen and I couldnt find any. Put it back together and oddly ADB started working!
After much searching...I was able to find this solution:
http://androidcommunity.com/forums/...s-storage-through-the-recovery-console-19999/
for a step by step, all I did was :
Adb root
Adb reboot recovery
Running:
ADb devices
Showed:
List of devices attached
32326B102E3E00EC recovery
then run:
adb shell
echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file
and the SD card became mountable and I was able to rescue my stranded data
BB

[Q] Any changes to the sdcard files will not take

editi guess sdcard is incorrect/confusing for my situation, it's the entire system up to root folders is stuck in a read-only type state.
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected]ost #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
plasticsoldier said:
I didn't really see anything that fits my current problem (sorry if there is an answer somewhere buried in here)
So to start off with info, I installed Android on the TP back in February for my fiancée just for the basics of email, videoplayer, comic reader, internet browsing. Nothing too extravagant, just something with more to offer than webos.
I never did any updates on it because it worked perfectly fine for what it was being used on.
I've changed out the video selection many times as she watches through the shows with no problems.
Now I go to change the files and I delete them, add the new stuff, all seems fine. Then I unmount it and everything I deleted is back and everything I added is gone. I've uninstalled apps and they come back, I've done updates to apps and they revert back to before the update.
I've gone into CMW and done the wipes and even formatted sdcard, cache, etc. Nothing works. Even mounting USB in CWM to add files gives the same result of them disappearing right after it is unmounted.
I've tried ACMEUnistaller but it doesn't work. I saw something flash by the screen about something failing, but it goes too fast to even really see what it's about.
Sorry this is so long. I appreciate any insight!
Kernel
2.6.35-palm-tenderloin
[email protected] #12
CyanogenMod version:
9.0.0-RC0-Touchpad-alpha2
Build Date
Mon, Feb 20 13:59:21 CST 2012
Build Number
IML74K
Click to expand...
Click to collapse
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
plasticsoldier said:
thank you so much for the info. Unfortunately Internalz didn't want to help the items stay deleted either. The stuck in read-only type mode is very weird.
I'm pretty sure I am 3 weeks out of the 1-year warranty on it, plus I am unable to remove android from it to even trick them that it just doesn't work.
I guess I'll try webos doctor and see if that can get it going.
edit: webos doctor not working, even with the closing it at 8-12% tricks and doing the lvm.static..... stuff... 'cause it of course doesn't see to actually delete anything... i'll have to double check tomorrow when i bought it, pretty sure it's over the year and since it turns on and has android kinda screwed
Click to expand...
Click to collapse
I would suggest trying to restore down to WebOS 3.0. In that procedure you literally wipe EVERYTHING on the internal partitions in novaterm and start from absolute scratch. Therefore, if it a software issue you could solve the problem. However, if it is a hardware issue, you'd be kinda screwed.
Yeah, none of the methods I've ended up finding about this problem or other bricked problems are working at all.
i checked at work when i bought it, which of course the 11th was the year mark... but I do have android installed so even if i can get any chance of them honouring it so close they'll probably be like "oh you have android, that'll be $$$ for us to do anything. thanks!"
So I guess I now I have a paperweight with some features.
cdzo72 said:
I've run across this 3 times with TPs I work on....
1st one had to be sent back to HP because somehow internal memory was damaged and got locked in some some of read only mode
2nd one I saw, I went into webOS, installed the internalz app, mounted the TP to the computer, then added and erased some files and from then on all was good in both webOS and Android
3rd and 4th (same customer) had to be sent in to HP
Now let me mention I live in Costa Rica so all these have been exposed to several scans at airport security checkpoints. I mention this because I haven't seen anything close to a read only problem with the TPs in the USA
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
There is a thread in the General forum about how to restore and downgrade. Have you tried that thread ? It is usually a great way to try and get that last restore before sending it back to HP.
73 de VE6AY
Sent from my HP Touchpad, running the latest CM9 nightly, from the XDA Premium App
how are you adding and deleting files when in android? which version of android do you have installed? have you tried different rom versions? have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to? it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard? are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android? have you run "fix permissions"? Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
sstar said:
When you got the tablets back had they been fixed or were they refurbs ? Did HP say anything about Android still being on it?
Click to expand...
Click to collapse
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
cdzo72 said:
They had been fixed but the owners sent them off and had to pay for the whole thing because they had Android on them. When I got my hands on them again I just reinstalled Android. HP charged a little over a hundred dollars for the fix
Sent from my aokp_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the answer, this would tend to suggest that the problem is software based corrupted or otherwise. I am trying to find a program that will allow me to read/format the Android partition on my windows computer and will let you know if come up with anything.
Regards
i guess i should change the title slightly.. it's not sdcard, but basically the entire touchpad contents. go to root and delete whatever i want and it doesn't matter. connect it and format with windows and it doesn't actually matter.
haxin said:
how are you adding and deleting files when in android?
Click to expand...
Click to collapse
i've added and deleted just by using mtp. i've also deleted the files on the android side with the video player (vplayer) i've installed es file explorer (which after restart is gone) and deleted with that. i've also gone into webos and installed internalz pro and deleted files that way, which it then seems to work until i of course do anything related to restarting.
some of the files i've put on, i've had it recognize briefly. so for the video file, start it, then it gets really choppy/glitchy playing it. so stop it, go back into the vplayer and it's back to the old stuff
which version of android do you have installed? have you tried different rom versions?
Click to expand...
Click to collapse
android version 4.0.3. nothing else will install. if i add files while in android, when i boot into cwm they are gone. if i mount usb in cwm and add them they stay briefly but when i try to flash them they fail.
have you tried moving and/or deleting files over adb? are you using windows or linux on your computer that youre connecting the touchpad to?
Click to expand...
Click to collapse
i have not tried adb yet, just not as familiar using it properly, i will give it a try though.
i am using windows 7 on my laptop currently. i do have a pc upstairs that i barely use that has vista, but i don't know how that would make a difference to the touchpad
it doesnt make sense that the sdcard would be set to read only. is it only certain folders that you cant modify the contents of, or is it the entire sdcard?
Click to expand...
Click to collapse
yeah as i put above i guess saying sdcard was a bit confusing/misleading (my bad, sorry!), i didn't really know what else to call it at the time or how to explain myself properly at first.
are you able to modify contents of folders in the / directory of the device using root file explorer or es file explorer in android?
Click to expand...
Click to collapse
i can move/delete/modify anything which has absolutely no effect to the device. i've used es file explorer and gone up to root and deleted everything and the system runs fine. says the system is empty with lots of free space (its the 32gb model) but restart or even go into recovery and everything is once again there.
have you run "fix permissions"?
Click to expand...
Click to collapse
i've run it a few times. just acts likes it's working and then says done. i've even gone into the mounts and storage in cwm and formatted sdcard/cache/data/system. does nothing at all in the end of things
Also, running webosdoctor wont wipe the sdcard contents or format the sdcard in any way. its going to change the data in the webos partition and may change some data in the /boot directory.
Click to expand...
Click to collapse
it was just something to try to get somewhere right. it never gets past 12%. always fails to reboot.
I am currently letting the battery drain and see if it dying and then being charged will do anything. probably not. but who knows. i talked to a "tech" on the chat support (i never mentioned android) who told me that having preware installed in webos causing it to become corrupt and they "don't knowledge of preware installed devices" exact words. no idea what that means haha don't have knowledge, don't acknowledge...
anyhow. i've not quite given up. i just don't really see it turning out any differently from the previous times. i do appreciate all the feedback and help very much though
ok so heres what I would try. First try flashing a new fresh rom. download one that you want to your computer like cm9 nightly or aokp or whatever you feel like. then boot into CWM recovery connect the touchpad to the computer via usb. then connect to the touchpad with adb. I'm not sure how to do this in windows because it's been so long since I've done it on a windows box, I always use linux.
adb has alot of options, you can move files to and from the device, you can uninstall or install app packages, and more. this way you can adb push the rom .zip to the touchpad's sdcard while youre in cwm recovery. this way you dont have to reboot the touchpad and risk having the file disappear, you can just go to 'install zip from sdcard' and then 'choose zip from sdcard' in cwm recovery after you adb push the rom, you should see it in the folder you pushed it to on the sdcard.
If you arent familiar with how to use adb from the command line or the terminal this might not make alot of sense and i dont know how better to explain it than that. Also yes windows 7 vs windows vista does make a difference there are issues with novacom installing properly, that's why you would have problems running acmeuninstaller or acmeinstaller2. if you look around you should find some videos or how to's that can probably explain it better. Hope this helps.
http://www.webos-internals.org/wiki/Novacom_with_Windows_7
http://forums.webosnation.com/webos-internals/295881-webos-doctor-12-issue-fixed-5.html
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
ve6ay said:
http://forum.xda-developers.com/showthread.php?t=1426244 is the thread I was talking about - it allows you to access the hard root of the device, repartition it, and start again from scratch. It is what I was suggesting last night, from my tablet when I didn't have the link handy.
Click to expand...
Click to collapse
Probably the best suggestion yet given that everything else has been tried.
Good luck.
****EDIT****
Before you attempt the step above I have just noticed a difference between between cwm and. TWRP2.2 which I have installed on my Touchpad via goo manager. If I open recovery via goo manager and then select wipe it gives me 4 options cache, davlik, factory reset AND system which i think says will remove your rom . I don't see the forth option available with the regular cwm/clockwork. Just a thought.
All the best with whatever you try next.
sstar said:
Probably the best suggestion yet given that everything else has been tried.
Good luck.
Click to expand...
Click to collapse
this would work, however you have to fix you novacom/novaterm issues on your windows machine before you'll be able to do any of this. the reason acmeuninstaller, acmeinstaller2 arent working is likely because youre on a windows7 64bit box and Palm-sdk, the novacomd.exe, noverm.exe, and javaruntime apps and drivers arent setup right. just make sure you have the proper javaupdates on your computer then you can install preware in webos, preware has some nice tools that will delete the entire android install partitions, one is called 'remove android' and the other is called 'tailor' you run them from within webos. after you do that then in webos you should do a full device reset. you'll find it in the "info" tab under settings in webos. this will delete and reformat the whole /media ,(aka sdcard) partition. so you will lose all the files you have stored on both webos and android. that format will take a long time probably like 30 min or more. after thats done. reboot the hp and run webosdoctor. now i know for sure this will work because ive done it on mine. remember to put the touchpad in developer mode in webos first to install preware. you can do that by typing webos20090606 into the webos search bar and hitting enter. I'll put links from my box.com accou t to everything you need.
https://www.box.com/s/479acdb6ef9c99fc7b92
https://www.box.com/s/1aed4722990aad251570
edit: also I'm not sure if youre on the 16gig 32gig or 64gig pad, the webosdoctor that i linked is for 32gig wifi only US version. if thats not what you have then youll need to get the doctor for for specific touchpad. or you could create a webosmetadoctor but thats a whole nother project.
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
plasticsoldier said:
i have the 32gb version. i assume US and Canadian aren't gonna make a difference
i've tried all those threads. any novacom/novaterm stuff doesn't work, the files won't delete so when trying to recreate they just error saying it already exists.
if the devices is on in androind the adb can find the device although the "Serial" has a bunch of ???? at the end of it. when i go to cwm adb cannot find the device.
in cwm i can mount and add files that way and go back to install zip sdcard but get:
Code:
--Installing /sdcard/aokp_tenderloin_milestone-4.zip
Finding update package...
Opening update package...
E: Can't open /sdcard/aokp_tenderloin_milestone-4.zip
(bad)
Installation aborted
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Click to expand...
Click to collapse
ok no one will be able to help you fix this issue unless you give complete details of the problems. when you say " novacom/novaterm stuff doesn't work" we cant really help specific error details is what i need. I dont mind helping you fix this but you have to be a little more specific on exactly what,where, and how youre installing and running and mounting apps and directories.
your problem IS fixable but you need to slow down and really do things exactly step by step.
Ok so back to ./adb. now when you boot in to CWM recovery on he touchpad DONT do anything in CWM just plug it into the computer. do not mount it as a usb storage and dont mount or unmount the sd partition LEAVE IT.
you can then use ./adb from the command line or terminal on the computer to move the files to the touchpad' or install apk's uninstall apk's you name it. This will require that you know some linux terminal commands. for example to move a new rom zip to the internal sd card or into any other folder you can use ./adb push command to run a root shell on the android device itself you can use ./adb shell and then change folder and file properties from readonly to rw. this can all be done while the touchpad is patiently waitng in CWM recovery. this way when youre done installing or uninstalling apps from the device and moving flash zips to it, you can disconnect the .adb connection with ./adb disconnect or just type exit from the terminal till it closes. unplug it then you will be able to pick up the touchpad and install zip from the sdcard, keep in mind you dont want to choose 'apply u[date from sdcard' you want to use the 'install zip from sdcard option' you can read up more on how adb works. it is probally the most important part of hacking android.
with that being said. novaterm is the palm webos version of .adb. this is why when you boot into webos recovery to do things like acmeinstaller and acmeuninstaller2 the novaterm novacom and novacomd apps have to be installed correctly on the computer or else you wont be going anywhere fast. some screenshot examples of how it should appear below.
https://www.box.com/s/432e63a83215f00eea6a
https://www.box.com/s/970bc29542a05f98f036
https://www.box.com/s/63c0f656e8354f7f2d6a
https://www.box.com/s/cbe3266467ae8e3ebabe
https://www.box.com/s/005e56a61a178dd17fa4 some better resolution images.
Plasticsoldier said
used "remove android" in webos, but then nothing is different after the fact as usual. 'tailor' doesn't seem to exist anymore in preware at least that i can find
not sure if there is anything else I can do at this point
Yes there is
Firstly tailor does exist, it is a beta and the facility to dl must be enabled.
Read this and scroll down to Enabling beta test feeds and follow the instructions , when you get as far as using the Linux command you CAN copy and paste thank God.
http://en.m.webos-internals.org/wiki/Testing_Feeds?wasRedirected=true . After that reboot into Webos and launch preware. Go into managed feeds as per the instructions in the link above and install Tailor. Reboot again and the app will work. It looks very good actually.
But before attempting to actually use Tailor please read the article I have posted below it is only 7 pages long but will explain how to use Taylor properly as it is a powerful tool.
http://forums.webosnation.com/webos...partition-filesystem-editor-beta-testing.html
I have done all of this , this morning so if you have any problems pm me or ask in this thread.
I sincerely hope that this helps, it should be the answer to your problems.
@haxin: sorry, wasn't trying to be unhelpful when everyone is being helpful to me. I shall be more detailed in future responses. I think i was getting frustrated and had had a busy exhausting day so it didn't help me come across clearly/properly.
OK, so I had preware installed already, so I removed it, went into developer mode, used the linux commands, reinstalled preware, added Tailor.
(i've done this a few times, because I didn't remove the cable after doing the linux commands for preware, then i accidentally hit the wrong buttons and it connected to 'usb drive' mode and wouldn't connect on the pc side and got stuck on the "ow disconnected me properly next time" screen).
So it gives me the following options
USB (media)
Android (system)
Android (cache)
Android (data)
Unused Space
the 'usb media' starts mounted and will mount again if unmounted. If I use 'check filesystem' it'll pass. So then I try 'delete partition' which pretends to delete, then it takes me to the unused partition which is still at 16mb. so i try to use "check filesystem' again and it fails. try repair and it fails as well
I've tried mounting the android parts just to see, they just sit there processing that they are trying to mount. trying to delete or anything else fails as well.
and now after trying things, any of the 'cards' will try to open and just sit there grey. and with my usb cable not plugged in it still is giving me the option to enter usb drive mode. and with this i have to restart and go through the steps again of adding Tailor which is getting tedious.
I restarted, went through the motions to get back to Tailor. trying out resizing just to see how that goes. So far 15%. not sure what will happen when done, but we will see.
This is getting long, so i'll end this part and update on anything and also try to familiarize myself with adb a tad more

[Q] Android keeps rebooting before even starts

Hi, I have SGS I9000 for over 2 years now, and today, I unlocked it and it just started to reboot, by itself. As far as the start goes is moment when it needs to switch between "starting aplicatios" and home screen. Then he goes again into starting android mode (it doesn't turn off completly, just android reeboting). It worked fine before seconds before.
I have MIUI android V4 and I've tried everything, wiping, restoring, but main problem is that I have some unsynced contacts and sms that I need but I can't access them. Can you help me please? (only way I can access internal storage is boot/mount/mount USB, because of the restarting thing)
something must be segfaulting everytime it comes to load the UI, what does adb logcat say?
Could you please tell me how to check adb logcat? I don't know much about phones but I'm willing to learn
unzip the adb package below, open a command prompt in that directory and type adb.exe logcat
you need Android Debug Bridge drivers installed, windows should do the job for you, unless you're on crappy vista
if it gets stuck on - waiting for device - you don't have those drivers
Tank you SuicideFlasher on your replies but I managed everything by my self :victory: I flashed my phone with Odin and got semaphore kernel, but it got stuck in a boor loop again. I then copied restore folder from my computer to internal storage (that i previously saved there), reinstalled CWM with Odin and restored the system that worked (I backup ed all data) and now I completely formated my phone to start over. Congrats if any of this makes any sence but it worked for me :good:
it's good to see beginners trying to fix stuff by themselves :good: you have good probabilites of becoming a dev one day imo
anyway, by using logcat you would just have watched the phone freak out in that bootloop while seeing in detail whatever the log could tell you, but i think that log would have frightened the hell out of you if your knowledge is really that minimal atm

Sort of a bootloop after Android 11 update

Hello guys,
I hope someone can help me with this problem...
So the thing is - yesterday I finally got OneUI 3 and Android 11 update (yay?). But ofcourse as soon as the phone rebooted and optimised all the apps and came back to main screen it rebooted after a minute or so...everytime. As soon as I enter my pin and unlock the phone it reboots after a short period.
The same problem happened when I de-bloated the phone a while ago via ADB - but I then enabled back all the apps except facebook and some "safe to debloat apps" which were not even system apps and it has since worked for almost a year. But here we go again....
I even "re enabled/installed" all the apps I could list in ADB ( so basically all the apps on the phone) and then went to wipe cache - but still no go.
I am also wondering if there is a posibility to somehow mount storage just to copy some files to my computer (which are important, and my latest backup is around a month old) and then I'll gladly do a a factory reset - no problem.
Any help would be appreciated, thanks!
If you're able to use ADB to enable/install apps, then you should be able to use "adb pull path/to/files" to copy the files to your computer. You could reboot into recovery mode and see if your computer pulls up the storage that way too. Also, if you have TWRP, you can use the file system to copy files to an external SD card. So you have a few options to get your files.
You can also create a back-up of specific apps (and their data) using "adb backup -f MyBackUpName.ab com.corp.AppName".
TacoDeMuerte said:
If you're able to use ADB to enable/install apps, then you should be able to use "adb pull path/to/files" to copy the files to your computer. You could reboot into recovery mode and see if your computer pulls up the storage that way too. Also, if you have TWRP, you can use the file system to copy files to an external SD card. So you have a few options to get your files.
You can also create a back-up of specific apps (and their data) using "adb backup -f MyBackUpName.ab com.corp.AppName".
Click to expand...
Click to collapse
Hello, thanks for the reply and helping out.
But all the commands and stuff is kinda useless because the phone reboots sooner than in 30 seconds after getting to the main screen. When I boot to recovery the storage doesn't get mounted.......
And I would've had TWRP but the phone is still under warranty so that's a shame, because on my backup phone I have it (and so did on all the previous ones) and it would be great. But IIRC if I install TWRP now, the phone needs to be wiped.
FFS samsung, what is this....because I now read a couple threads and posts on social media people having exactly same problem, and some didn't do anything with ADB prior to update. shame...

Categories

Resources