Database Develop

[Q] Odin3 not working

I had been using my Captivate for a while, and used Kies mini to upgrade to Froyo, and everything had been working fine until randomly the phone wouldn't boot.
It would take forever to go from the AT&T home screen, and would lag through the galaxy s intro, and then stop.
I tried to use Recovery mode, and it didn't work, so I tried to use Odin3 to flash back to stock.
Now it won't go past the Logo screen, and recovery mode doesn't work, but download mode still does. I have tried Odin one click, and Odin three click v 1.0, 1.3, and 1.7. I've used the .tar and the .pit from Breakin' Ranh's [Guide] How to Recover a Captivate to Stock 2.1 Eclair JH7
It keeps getting stuck in a boot loop after odin, no matter what I do.
Any suggestions?
Using SGH-i897
1007

first boot takes along time to build new files and delvik.. are you sure you waited long enough?
keep trying to get into recovery. try holding the buttons a little after the screen comes on.
factory wipe/ clear phone/

It keeps going to the AT&T logo screen for like 10 seconds, and then goes to the spinning wheel/battery charging screen, and then reboots.
Can't get into recovery mode through it, still.

a different .tar package.... dunno about that one..
or flash to 2.2 tar package

I have to use rom manager to get to recovery on my captivate
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

I was able to use a dragon rom to get it to boot, but now my phone wont give me any access to my internal sd card, and won't mount my external, so I can't download rom manager because I "have no room" Where do I go from here?
I've already tried formatting both cards, and it seems like nothing happens whenever I click on format.

you dont need rom manager....ever

Then what does he need?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

stuck in the same position
I can get into download mode (only with a JIG tho) but when I go back to stock with Odin (or try to) it's just stuck in the AT & T logo screen, it doesn't go beyond that, how do I get into recovery mode, press both Volume buttons and Power button, when the AT&T screen comes release the Power button right?
Need some help please!

you might need to flash the 3 button fix but keep trying, if you get into recovery clear data and cache. but first boot always takes a long time as it has to build delvak cache and more... try flashing again, with the 3 button fix att rom.

3 button fix? to get into download mode you mean? I CAN get into download mode (with the jig) but not into recovery mode :-s
I have no idea how to flash it without being in the Stock rom, any help?

download is 2 buttons
recovery is 3 button.
some phones loose the 3 button combo to get into recovery.
in that case you need to flash the stock rom with 3 button fix.
it is for Att only so i dont know much more.

After Odin, I was in a boot loop yesterday. I plan on writing it up in a new thread to see if someone can help me understand what happened (cause I have Odined and modded two different cappys without issue) but here is how I was able to recover.
After Odin was complete and said successful, it reboots the phone.
Upon reboot I was in the ATT boot loop. After Odin, I lost both three button recovery and 2 button download (both of these worked before Odin). I don’t have a JIG so no way of getting to download mode.
I read to try the following sequence after reading it other posts.
1. Pull battery, sim, SD card and unplug the USB. Let it sit for a minute.
2. Plug in the USB cable.
3. Holding all three buttons, plug in the battery.
4. The battery charge (grey) should be seen on the phone. After the phone screen goes black twice let go of the power button.
This worked for me once, after several attempts.
Now that the phone booted back up, I did a master clear with Odin.
Upon reboot right back in to the ATT boot loop screen.
Was not having any luck with the steps above after several attempts.
Here is how I eventually recovered.
1. I opened Odin on the PC.
2. Pulled the battery and USB for a minute or two then replaced it and plugged in the USB cable.
3. After few cycles of black battery icon and spinning wheel, the batter icon turned green (like normal when you turn your phone off and plug it in). Sometimes this only took two cycles and sometimes many cycles (or a few minutes).
4. Once the battery icon was green, I hit the power button.
5. As soon as you see the ATT screen, pull the USB cable and the phone booted (if I left the USB plugged in, the phone went back to the black battery screen after the ATT screen).
6. I copied the correct Update.zip and Rom to my SD card.
From here I tried to boot into recovery via ADB.
The phone rebooted but back into the ATT boot loop.
Following the second set of steps above (2-3 times), I was finally able to get into Clockwork recovery.
From here I flashed Phoenix Unleashed.
After the flash rebooted and the phone seems to be running fine now (with the exception that I lost my 3 and 2 button combos, but that will be for a different thread).
From the Power Menu, I can get into download mode or Recovery no prob.
Not sure if this is something that will work for others but wanted to throw it out there just in case.

It never booted for me, so this is what I did
For anoyone that might find this thread, Odin 1 Click didn't work for me, so I flashed back into stock using Odin (not the 1 click version, another one), here are some links that proved to be very helpful (I ended up Flashing to Serependity 6.4):
http://forum.xda-developers.com/showthread.php?t=1031749
http://www.youtube.com/watch?v=Rdn5GoRjhn0
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
http://forum.xda-developers.com/showthread.php?t=884364
http://forum.xda-developers.com/showthread.php?t=919816
http://android-roms.info/roms/80-Serendipity
http://serendipityrom.weebly.com/download.html

FIXED:
Used this version of Odin to get me into recovery mode:
http://www.multiupload.com/PM9TNZWL84
Once I got that, I realized my internal SD card wasn't mounting properly, and used http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
this thread to finish flashing back to stock.

[Q] I think I bricked my Captivate flashing Serendipity

I had Cognition 4 flashed but had a problem that whenever the battery was removed when the phone was on, about half of my apps, wifi, and texting would force close on reboot and never be able to open until I reflashed Cogntion. Because of this, I decided to try Serendipity VII. I put the zip file on my phone, rebooted into recovery, then tried to do the same thing that I did for Cognition. When I did this it said that it was installing, then said install complete without rebooting. I decided to reboot the phone, and when I tried, it keeps looping on the att screen. I do not see the battery charge signal when I plug it in. I see a loading gear for the battery for about five seconds, then the screen has electric looking blue lines flash through the center and then nothing. I cannot boot into recovery or download, it just keeps looping on the ATT screen.

Make or buy a jig to force it into download mode.
Sent from 234 Elm Street

slow_DC4 said:
Make or buy a jig to force it into download mode.
Sent from 234 Elm Street
Click to expand...
Click to collapse
How do I force it into download mode?

So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*

cappysw10 said:
So you tried flashing a GB rom without first flashing GB bootloaders?
You should have read and followed the installation instructions on the Serendipity download page. Start Odin one click,see if you can get phone into download mode by any combo and see if Odin sees it. Flash stock and start again.
*If you're not on Gingerbread, you should be shot*
Click to expand...
Click to collapse
Ya, I had a feeling I should have read more about it, but I was anxious and stupid. I didn't do any of those things. No matter what I try I can't get to recovery. How would I get into download?

JIG
10 char

Thanks for all the help, I will be buying a jig from amazon for about ten bucks. I hope this works. But if it doesn't, at least this will teach me to read instructions before doing something that I don't understand very well.

to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped

srkoza said:
to get into download mode press volume down instead of volume up to get u into recovery, at first i screwed up too somewhat like you so what i did is removed the battery for a minute, put it back in press volume down middle and power button to get into download then use odin to flash a new 2.3.4 gingerbread that u can get from this forum just look through and ull find it, make sure u put the pit file phone file, pda and csc files and make sure u check the repartition auto reboot and freset time checked on then press start hope it helped
Click to expand...
Click to collapse
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway

jmj45 said:
Ya, holding the volume button in any combination does noting, I hope a jig will fix it. But thanks anyway
Click to expand...
Click to collapse
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers

Mr. Janderson said:
Sir try this one last thing, remove your USB Cable from your PC, remove your battery...
While holding down both (Up and Down) volume buttons, insert the battery and THEN connect your phone to your PC through USB, see if this puts it into Download mode.
If not, try doing the same just holding down the DOWN volume button. Hope this helps, it seems as if these combinations kind of vary from phone to phone. Cheers
Click to expand...
Click to collapse
I tried this and all it did was do the att loop screen thing. Also, my computer dinged that it saw a usb device being plugged in, but then the restart loop restarts the phone and continues this indefinitely. Thanks for the help anyway.

You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.

abmicyau said:
You don't need to buy a jig, just go do that thing where you get three (or four) resistors in series that totals 301k ohms and touch them to specific contacts in the usb port of your phone... look it up on xda, it's worked for most people.
Click to expand...
Click to collapse
Thanks, but I already screwed up my phone by doing something that I did not fully understand, it's a small wonder that I can use Linux and not be too confused. I think I will take the easy way out with this one.

Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?

Mr. Janderson said:
Hmm I remember that often when I tried to put my phone into recovery mode or download, whenever I held the Power Button down, it would just keep looping. When you but the battery on and connect your phone, make sure you are not holding the Power button, just the volume ones. Perhaps it is your case?
Click to expand...
Click to collapse
It loops if whether or not I hold any buttons down. If I hold the power button down while trying to get into download mode, then it just turns it off.

Turn off the phone, remove the battery, get a stock odin one click for the captivate.
I897UCJF6-final-OCD-REV0 seems to be a reliable flash when I run into trouble.
Start odin, plug the phone into the USB cable, hold the volume up/down key or try any combination up/down or both. Insert the battery and hopefully it will go into download mode.
Been reliable so far...

Hi. I'm unable to get into recovery mode after I flashed the Talon kernel as per the instructions here.
http://www.team-continuum.net/forum...ses/(guide)general-installation-instructions/
I'm consistently able to get into download mode and reflashed the talon 0.1.2 kernel as per the instructions there, but still to no avail. Any other suggestions to get my phone into CWM ?
Im trying to flash Continuum 6

Might as well get the Jig easy Download mode xD. I made mine myself cost a whole $2.50 for one xD

Can't get into download mode

Hey
I used cwm to install Darkys Rom 10.2, it said successfully installed unfortunately when I reboot it shows the at&t logo and then goes back to the recovery menu. I tried installing it a second time same result. When I try to go into download mode using these methods
"2. The Power + Volume Down Method: If the phone doesn't display the "phone-exclamation mark-computer" picture on power up:
Remove and replace the battery.
Hold the Volume Down button while pressing the power button until the "Download Mode" picture displays. Then release the buttons.
3. If the phone is "semi-bricked"; i.e., the "phone-exclamation mark-computer" picture appears on power up (perhaps from a bad ROM flash):
Be sure the Samsung USB drivers for the phone are installed on your computer.
Remove and replace the battery.
Connect the phone to the computer with the USB cable. The "phone-exclamation mark-computer" picture should display on the phone's screen.
Hold the Volume Up+Volume Down+Power buttons down simultaneously.The screen should go blank, then the picture should appear again. When the screen goes blank a second time, release the Power button while continuing to hold the Volume Up+Volume Down buttons down.
4. If the phone does not allow you to go into Download mode after trying the aforementioned steps above you can try this method to "force" it into download mode:
Be sure the Samsung USB drivers for the phone are installed on your computer.
Remove the Battery, SIM Card, and any External SDCards.
With the Battery removed plug the USB into your phone.
While holding both the Up+Down Volume button and the USB is plugged into your phone - put the battery back into the back of the phone. You should see the Download mode screen pop up.
If you see the Powered Off Charging screen - attempt the above steps again."
Click to expand...
Click to collapse
it never goes into download mode, it simply shows an image of a battery. After a while it goes into recovery mode.
Any idea what I can do? I am still able to get into CWM, is there any way for me to get another ROM file in there so that I can try flashing another?
I tried putting in an external SD card but I can't browse it to use other rom files
If anyone has any suggestions I'd be very grateful
Thanks

woodyear99 said:
Hey
I used cwm to install Darkys Rom 10.2, it said successfully installed unfortunately when I reboot it shows the at&t logo and then goes back to the recovery menu. I tried installing it a second time same result. When I try to go into download mode using these methods
it never goes into download mode, it simply shows an image of a battery. After a while it goes into recovery mode.
Any idea what I can do? I am still able to get into CWM, is there any way for me to get another ROM file in there so that I can try flashing another?
I tried putting in an external SD card but I can't browse it to use other rom files
If anyone has any suggestions I'd be very grateful
Thanks
Click to expand...
Click to collapse
In CWM, go to mounts and storage to mount your SD card and put another ROM on. Also, Darky 10.2 REQUIRES lagfix for data AND system which could be your problem now. Enable them if not and reflash
Sent from my SAMSUNG-SGH-I897 using Tapatalk

[Q] Stuck on LG logo after CM7! help!

I recently installed CM7 after rooting my phone with Superoneclick and installing Clockworkmod. However, after installation of CM7, i managed to boot up the system, played around with it and realised that i needed to install the google addon as well. So i rebooted the phone to enter into CWM recovery, however the problem started.
My phone is now stucked on the LG logo screen and would not change. I left the phone in that state till the battery went dead. Recharged the phone and it remained on that screen.
Tried to connect the phone to the PC to flash it with smartflash, but it doesnt work at all. I removed the battery and held the volume down button while plugging in the usb cable. All i see is the phone stucked on the white LG logo screen.
Is there any way that i can reformat the contents of the phone or is my phone certified?
All help would be much appreciated!

Power up directly to cwm by pressing power button and volume down key at the same time.
Once in cwm, full wipe including /system and reflash cm and gapps.
Good luck.

I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?

audilogic said:
I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?
Click to expand...
Click to collapse
Hmm.....if u can't power to cwm directly then perhaps try smartflash to any stock rom.
1. Download any stock rom
2. Start smartflash app from pc
3. In power off mode, just press volume down to boot to software update screen. Start smartflash stock rom.
4. Boot up stock rom
5. Install rom manager and flash cwm from rom manager. (Or download cwm from Rusty! Cwm thread)
6. Boot to recovery
7. Flash cm rom
8. Flash gapps

Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.

yup, tried the exact method that you suggested too. But it doesnt work. Still gets stuck at the LG logo.

Rusty! said:
Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.
Click to expand...
Click to collapse
This method worked! But i have another problem, windows found an APX device, tried to install it but failed. It says driver was not found. Do i have to install a specific driver for this to work? Thanks!

Yes, good point: http://android.modaco.com/topic/335...k-rom-release-v10b-dated-1300166062-15032011/

I have managed to flash the phone and it is back working now. Thank you so much for your help rusty and temasek!

Hi, first post, hope the thread is not too old.
Unfortunately this is my best chance.
I have the same problem on my O1:
Updated from mik's beta 6.5.7 to beta 6.5.8 with the clockwork manager, at the reboot, I was stuck on lg logo.
Unfortunately usb + both volume buttons didn't work.
It remains still at the lg logo.
Pressing home + both volume, it repeately reboots.
In every case I can't go in recovery mode, so I can't wipe the system folder.
Any help will be appreciated,
thank for your time!
PS: sorry, maybe thread in p500, cm7 will be more appropriate.

hold power button + volume down button for 5-10 seconds may work, phone will reboot into recovery mode, then you are able to flash a stock rom or restore your nandroid-backup (if you made one)
good luck, hope it helps you

thanks, I saw a useful post here:
http://forum.xda-developers.com/showthread.php?p=18531050#post18531050
Then I proceded as you wrote.
Now I'm stuck at adroid logo, without the chance to wipe cache.
The recovery does not start: loading bar and then forced reboot...
I don't know what to do

nvflash
maybe you try this link
android.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/
Sorry, i don't get the link working, copy it in your browser, then it should work (i'm posting with my phone that's why the link is'nt correct, but it works with browser, i tried it out)

If the link doesnt work, search 'nvflash lg p990 instructions' with google, you'll see the modaco website with the instructions and the download links
Sent from my Optimus 2X using XDA App

Thank you. A few hours ago, I managed to make it working.
Thanks for your answers, I appreciated.

nvflash is the way to go. Always make sure to use the usb ports on your motherboard (back of your computer) and not some usb hub or so.
Had a black screen for 8 hours, not able to boot, flash, recover or anything.
Changed usb port and I was able to flash the phone again.

[Q] Brick my Caprivate I897 with Cyanogen 7.1

Hi
I have Captivate I897 at&t
Two days ago I successfully installed Cyanogen 7.1 and I used the phone for some calls and some phone poweron/poweroff with any problem.
Today I copied on sd card the gapps-gb-20110828-signed.zip for some google apps and I used Rom manager and clockwork (version 3.0.0.5) for reboot recovery.
BIG PROBLEM
Any recovery/download mode has appeared!
Only cyanogen mod logo HANG during startup, tried many times and same issue.
Any solution found for enter recover/download mode working for me, no combination of buttons work.
How I can unbrick my Captivate?
Greetings from italy (or what remains of it)

xoms said:
Hi
I have Captivate I897 at&t
Two days ago I successfully installed Cyanogen 7.1 and I used the phone for some calls and some phone poweron/poweroff with any problem.
Today I copied on sd card the gapps-gb-20110828-signed.zip for some google apps and I used Rom manager and clockwork (version 3.0.0.5) for reboot recovery.
BIG PROBLEM
Any recovery/download mode has appeared!
Only cyanogen mod logo HANG during startup, tried many times and same issue.
Any solution found for enter recover/download mode working for me, no combination of buttons work.
How I can unbrick my Captivate?
Greetings from italy (or what remains of it)
Click to expand...
Click to collapse
remove battery, hold volume + and volume -, then insert battery and plug in cable to computer. this should put you in download mode.
If that does not work, grab a heimdall or Odin one-click from the development forums and flash it.

AdamOutler said:
remove battery, hold volume + and volume -, then insert battery and plug in cable to computer. this should put you in download mode.
If that does not work, grab a heimdall or Odin one-click from the development forums and flash it.
Click to expand...
Click to collapse
Might be kinda hard to use Odin or Heimdall if you can't get in to DL mode.
OP, what Boot Loaders are you using? If you are on I9000 BL's then you need to pop out the battery and replace. Hold down (Volume-Down) and hit the power button. Then you can plug it up to the computer and use Odin or Heimdall. If it's I897 BL's then you do as Adam stated above. If that doesn't work try it again without the SIM card or the SD card. If it still doesn't work you'll need to make/buy a JIG and force it.

jbabbler said:
Might be kinda hard to use Odin or Heimdall if you can't get in to DL mode.
OP, what Boot Loaders are you using? If you are on I9000 BL's then you need to pop out the battery and replace. Hold down (Volume-Down) and hit the power button. Then you can plug it up to the computer and use Odin or Heimdall. If it's I897 BL's then you do as Adam stated above. If that doesn't work try it again without the SIM card or the SD card. If it still doesn't work you'll need to make/buy a JIG and force it.
Click to expand...
Click to collapse
Sorry... yeah... if that does not work use a 301kohm jig. Once you're in download mode, you can use those tools.

Hi
remove battery, hold volume + and volume -, then insert battery and plug in cable to computer. this should put you in download mode.
Click to expand...
Click to collapse
Not working I see the battery recharging green status.
The only solution is makea JIG and force it?