My Tab 7 has bricked, i dont know what original or stock of this Tab.
I try to flash Rom of ROTO hammer, but it failed
I dont know the original of this so i cant down exactly firmware at samfirmware.com
What can i do now?
I am so confused.
My Tab has DOWNLOAD MODE.
When it goes to Original Recovery of Tab, it shows that
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media: Can't mount SDCARD.
Pls help me.
Thanks and best reards.
Related
I have a Samsung Captivate that was running 2.2 flashed by Keis.
I could not see all of my internal sd space so I wanted to flash a custom rom.
I have used Titanium Backup to back up my phone.
I then Tried to use AIO Captivate Toolbox 2.5 to flash back to stock.
Now every time that I try to boot my phone it goes into system recovery <2e>
at the bottom it says
update media, please wait ...
e:Can't mount /dev/block/st101
(invalid argument)
e:copy_DBdata_media:Can't mount DBDATA:
copy defaul tmedia content failed.
Please Help
Just to add to the last post I can still get into download.
download the file in my sig. Flash it with odin 1.3
http://dl.dropbox.com/u/20958367/Odin3 v1.3.exe
I can walk you through it if you like.
I got 1.3 from the link that you gave me, but neither link in your signature works.
Could you post them again?
windburn said:
I got 1.3 from the link that you gave me, but neither link in your signature works.
Could you post them again?
Click to expand...
Click to collapse
theres the new URL for 2.1
http://dl.dropbox.com/u/20958367/I896UXJI2-homebinary.tar
Thank you so much.
I am downloading it now.
Just a few questions.
When I do odin what do I select pit, PDA or what?
Also do I have to change any of the options like re-partition?
Don't change any options at all. Open odin and leave it as is.
The file goes into the PDA section, no pit file is required.
odin did it's thing said pass 1:51.
Then it re-booted into android system recovery <2e>
What would you like me to do?
Exit recovery, and attempt to boot the phone.
I thought we had it but no luck.
it is still going into recovery
with this error
update media, please wait ...
e:Can't mount /dev/block/st101
(invalid argument)
e:copy_DBdata_media:Can't mount DBDATA:
copy defaul tmedia content failed.
try flashing the 2.2 one it has a different recovery 3e.
I am downloading now.
I will let you know what happens
Once it reboots it should go into recovery and install a bunch of files and then boot back up by itself.
It re-booted into recovery but got the same error.
It did not install any files or reboot again.
windburn said:
It re-booted into recovery but got the same error.
It did not install any files or reboot again.
Click to expand...
Click to collapse
Its by me at this point. That method has always worked for me.
Sorry I couldn't get you any further than you were.
I was reading this does it make sense to you
http://forum.xda-developers.com/showthread.php?t=788850
It looks Like I screwed up the partition table does anyone have a pit file for 2.2 Rogers?
windburn said:
It looks Like I screwed up the partition table does anyone have a pit file for 2.2 Rogers?
Click to expand...
Click to collapse
Reading that, its sounds exactly like what happened.
I don't know of any pit file for Rogers.
Thanks for your help nickm50
I will keep looking and see if I can find any way to fix this.
Maybe someone who has fixed the problem before will let us know how they did it.
i am now using the ZSJPG 2.2.1 version.
i use this version for few weeks already and there is no problem...
but yesterday i failed to turn it on and it stayed in "S" logo and vibrated....
so far i know 3 ways to solve this...factory reset, flash a rom or flash the original kernel...
but i want to keep my data and files!! which one is better??
thanks to everyone!
many thanks!!
I too have a similar problem ! I tried re-flashing. it doesn't help. When I go into recovery mode, It says " update media, please wait E:cant mount /dev/block/stl10 ( invalid argument) E:copy_dbdata_media : Can't mount DBDATA :
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed. "
manosijmukherjee said:
I too have a similar problem ! I tried re-flashing. it doesn't help. When I go into recovery mode, It says " update media, please wait E:cant mount /dev/block/stl10 ( invalid argument) E:copy_dbdata_media : Can't mount DBDATA :
your storage not prepared yet, please use UI menu for format and reboot actions.
copy default media content failed. "
Click to expand...
Click to collapse
you mean you failed in both re-flashing rom and kernel??
Now it works.. Peculiar!
I was on I9000XWJV1 .. wanted to go back to I9000XWJS8. Tried JPY as well .. Was having the above mentioned problem. Now I flashed it again with JV1, now it works fine.
Could someone explain this ?
manosijmukherjee said:
Now it works.. Peculiar!
I was on I9000XWJV1 .. wanted to go back to I9000XWJS8. Tried JPY as well .. Was having the above mentioned problem. Now I flashed it again with JV1, now it works fine.
Could someone explain this ?
Click to expand...
Click to collapse
you flashed rom or kernel??
does your data still exist in your phone?
all gone.. I flashed my kernel
Hello every one,
I tried to flash my Bell Samsung Galaxy GT I 9000M with gingerbread but things got messy and now I am stuck in bootloops...
I have already tried to flash back to the stock Eclair room but it's still not working.
I can still access download mode and recovery.
Here is the error message I get when I go into recovery:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet, please UI menu for format and reboot actions
Media files copy failed.
I think I need the seperate PIT, PDA and PHONE files to flash via Odin ticking repartion, and then upgrade to last version avaible via kies to fix this. But I don't where to get this files for Bell Canada I9000M.
I don't know how to fix this. Can someone help me ?
Here was my phone stock configuration before all that happens:
Baseband version
I9000UGJL2
Firmware
2.2
Kernel
2.6.32.9
[email protected] #3
Build number
FROYO.UGJL2
galaxy s vibrant bell
gt-i9000m
Note: I hope I posted at the right place, if not the mods can feel free to move it
google searched and found this in an old thread:
http://forum.xda-developers.com/archive/index.php/t-768441.html
http://www.multiupload.com/N62CDNXXXK I haven't downloaded the file so I'm not sure if it is 3 parts.
The other thing I'm thinking of (and I hope is not true), is the time when all Bell I9000M phones were dying after the official upgrade to froyo 2.2
http://forum.xda-developers.com/showthread.php?t=886158
Best of luck to you, sorry I can't be of more help as I'm not that experienced with this.
Thanks man.
I found a way to fix it. I installed back the stock I9000UGJL2 froyo via ODIN using 512 PIT file and repartition, then I got this new error message
E: can't mount /dev/block/stl10 (invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
After that I followed this tuto http://forum.xda-developers.com/showthread.php?t=984140 to solve it.
Now I'm back on trail and I have to find a safer way to instal Gingerbread JVH.
I will try the method that you described me here http://forum.xda-developers.com/showthread.php?t=1075144&page=2 but I would be happy to have some more details and the exact files I have to use...
I'm afraid to get in troubles again.
Thanks again for your help JJustin.
I found a way to solve my problem (i described it in the other thread I started http://forum.xda-developers.com/showthread.php?p=14620127#post14620127).
Now eventhough I am not so confident, I will try to install gingerbread again using other methods.
I am open to any ideas. I will let you guys know if I get it right.
Thank you all.
If u want gingerbread follow darkys guide exactly and u will run gingerbread
Sent from my GT-I9000m using XDA Premium App
nguetto said:
I found a way to solve my problem (i described it in the other thread I started http://forum.xda-developers.com/showthread.php?p=14620127#post14620127).
Now eventhough I am not so confident, I will try to install gingerbread again using other methods.
I am open to any ideas. I will let you guys know if I get it right.
Thank you all.
Click to expand...
Click to collapse
wat was it?
OH S***T!!!!! Thank you very much worked like a charm!!!
Plss help me i9000
I heve this error in my galaxy s i9000 .
hello plz help me...
It happen becoz i flash cm10 rom from humberos ics, maybe i do it wrongly, miss one step probably.
i have tried to flah stock rom and pit with odin, but my gtab still bootloop can not get to os
first the logo appear after that some command line error like this:
Adroid system recovery <3e>
samsung recovery utils
-for BML -
and below that there is an error code
update media. please wait
update media. finished
#normal mode #
update application. please wait
E:Can't mount /dev/block/mmcblk0p3
(invalid argument)
E:install_application_for_customer:Can't mount HIDDENSDCARD:
your storage not prepared yet, please use UI menu for format and
reboot action.
copy application failed
--- Aplling Muti-CSC...
Installing Multi_CSC
thank you for any help someone....
It can't be because you flash humberos.
You still have stock 3e recovery.
You need to flash a custom recovery.
You didn't say what model of tab 7 you have.
If P 1000, follow my signature.
Overcome kernel will give you cwm recovery.
Sent from my GT-N7100 using xda app-developers app
i try to flash one rom to my s3 mini but but i dont know what happens cuz it didnt works i have this problem my phone turn on in recovery mode and it says E:failed to open last_install:no such file or directori
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
can some body help me plz
sorry for my english
First things first - are you sure you are downloading the correct file for your s3 mini?
Second - do you have the latest recovery?
Finally, try to Re-download the zip file, you may have a bad download.
Hope this helps.
varianceness said:
First things first - are you sure you are downloading the correct file for your s3 mini?
Second - do you have the latest recovery?
Finally, try to Re-download the zip file, you may have a bad download.
Hope this helps.
Click to expand...
Click to collapse
i try but nothing happens i dont know what to do
I think you should flash official stock rom via Odin.