i try to flash one rom to my s3 mini but but i dont know what happens cuz it didnt works i have this problem my phone turn on in recovery mode and it says E:failed to open last_install:no such file or directori
E:failed to mount /cache (No such file or directory)
E:Can't mount /cache/recovery/log
can some body help me plz
sorry for my english
First things first - are you sure you are downloading the correct file for your s3 mini?
Second - do you have the latest recovery?
Finally, try to Re-download the zip file, you may have a bad download.
Hope this helps.
varianceness said:
First things first - are you sure you are downloading the correct file for your s3 mini?
Second - do you have the latest recovery?
Finally, try to Re-download the zip file, you may have a bad download.
Hope this helps.
Click to expand...
Click to collapse
i try but nothing happens i dont know what to do
I think you should flash official stock rom via Odin.
Related
I have a Samsung Captivate that was running 2.2 flashed by Keis.
I could not see all of my internal sd space so I wanted to flash a custom rom.
I have used Titanium Backup to back up my phone.
I then Tried to use AIO Captivate Toolbox 2.5 to flash back to stock.
Now every time that I try to boot my phone it goes into system recovery <2e>
at the bottom it says
update media, please wait ...
e:Can't mount /dev/block/st101
(invalid argument)
e:copy_DBdata_media:Can't mount DBDATA:
copy defaul tmedia content failed.
Please Help
Just to add to the last post I can still get into download.
download the file in my sig. Flash it with odin 1.3
http://dl.dropbox.com/u/20958367/Odin3 v1.3.exe
I can walk you through it if you like.
I got 1.3 from the link that you gave me, but neither link in your signature works.
Could you post them again?
windburn said:
I got 1.3 from the link that you gave me, but neither link in your signature works.
Could you post them again?
Click to expand...
Click to collapse
theres the new URL for 2.1
http://dl.dropbox.com/u/20958367/I896UXJI2-homebinary.tar
Thank you so much.
I am downloading it now.
Just a few questions.
When I do odin what do I select pit, PDA or what?
Also do I have to change any of the options like re-partition?
Don't change any options at all. Open odin and leave it as is.
The file goes into the PDA section, no pit file is required.
odin did it's thing said pass 1:51.
Then it re-booted into android system recovery <2e>
What would you like me to do?
Exit recovery, and attempt to boot the phone.
I thought we had it but no luck.
it is still going into recovery
with this error
update media, please wait ...
e:Can't mount /dev/block/st101
(invalid argument)
e:copy_DBdata_media:Can't mount DBDATA:
copy defaul tmedia content failed.
try flashing the 2.2 one it has a different recovery 3e.
I am downloading now.
I will let you know what happens
Once it reboots it should go into recovery and install a bunch of files and then boot back up by itself.
It re-booted into recovery but got the same error.
It did not install any files or reboot again.
windburn said:
It re-booted into recovery but got the same error.
It did not install any files or reboot again.
Click to expand...
Click to collapse
Its by me at this point. That method has always worked for me.
Sorry I couldn't get you any further than you were.
I was reading this does it make sense to you
http://forum.xda-developers.com/showthread.php?t=788850
It looks Like I screwed up the partition table does anyone have a pit file for 2.2 Rogers?
windburn said:
It looks Like I screwed up the partition table does anyone have a pit file for 2.2 Rogers?
Click to expand...
Click to collapse
Reading that, its sounds exactly like what happened.
I don't know of any pit file for Rogers.
Thanks for your help nickm50
I will keep looking and see if I can find any way to fix this.
Maybe someone who has fixed the problem before will let us know how they did it.
Hello every one,
I tried to flash my Bell Samsung Galaxy GT I 9000M with gingerbread but things got messy and now I am stuck in bootloops...
I have already tried to flash back to the stock Eclair room but it's still not working.
I can still access download mode and recovery.
Here is the error message I get when I go into recovery:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet, please UI menu for format and reboot actions
Media files copy failed.
I think I need the seperate PIT, PDA and PHONE files to flash via Odin ticking repartion, and then upgrade to last version avaible via kies to fix this. But I don't where to get this files for Bell Canada I9000M.
I don't know how to fix this. Can someone help me ?
Here was my phone stock configuration before all that happens:
Baseband version
I9000UGJL2
Firmware
2.2
Kernel
2.6.32.9
[email protected] #3
Build number
FROYO.UGJL2
galaxy s vibrant bell
gt-i9000m
Note: I hope I posted at the right place, if not the mods can feel free to move it
google searched and found this in an old thread:
http://forum.xda-developers.com/archive/index.php/t-768441.html
http://www.multiupload.com/N62CDNXXXK I haven't downloaded the file so I'm not sure if it is 3 parts.
The other thing I'm thinking of (and I hope is not true), is the time when all Bell I9000M phones were dying after the official upgrade to froyo 2.2
http://forum.xda-developers.com/showthread.php?t=886158
Best of luck to you, sorry I can't be of more help as I'm not that experienced with this.
Thanks man.
I found a way to fix it. I installed back the stock I9000UGJL2 froyo via ODIN using 512 PIT file and repartition, then I got this new error message
E: can't mount /dev/block/stl10 (invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
After that I followed this tuto http://forum.xda-developers.com/showthread.php?t=984140 to solve it.
Now I'm back on trail and I have to find a safer way to instal Gingerbread JVH.
I will try the method that you described me here http://forum.xda-developers.com/showthread.php?t=1075144&page=2 but I would be happy to have some more details and the exact files I have to use...
I'm afraid to get in troubles again.
Thanks again for your help JJustin.
I found a way to solve my problem (i described it in the other thread I started http://forum.xda-developers.com/showthread.php?p=14620127#post14620127).
Now eventhough I am not so confident, I will try to install gingerbread again using other methods.
I am open to any ideas. I will let you guys know if I get it right.
Thank you all.
If u want gingerbread follow darkys guide exactly and u will run gingerbread
Sent from my GT-I9000m using XDA Premium App
nguetto said:
I found a way to solve my problem (i described it in the other thread I started http://forum.xda-developers.com/showthread.php?p=14620127#post14620127).
Now eventhough I am not so confident, I will try to install gingerbread again using other methods.
I am open to any ideas. I will let you guys know if I get it right.
Thank you all.
Click to expand...
Click to collapse
wat was it?
OH S***T!!!!! Thank you very much worked like a charm!!!
Plss help me i9000
I heve this error in my galaxy s i9000 .
My Tab 7 has bricked, i dont know what original or stock of this Tab.
I try to flash Rom of ROTO hammer, but it failed
I dont know the original of this so i cant down exactly firmware at samfirmware.com
What can i do now?
I am so confused.
My Tab has DOWNLOAD MODE.
When it goes to Original Recovery of Tab, it shows that
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media: Can't mount SDCARD.
Pls help me.
Thanks and best reards.
hello guys
i face that problem every time i flash rom(omega rom) via cwm:crying:
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
and the flashed rom stucked at boot
i found this thread
http://forum.xda-developers.com/showthread.php?t=1713419
but i cannot find the same files in the attachment for sgs2
plz if any one can help me i will be very greatful
sorry my bad english
memo hamdy said:
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
Click to expand...
Click to collapse
Try and locate the exact csc file in .tar or .zip format for your model...sgs2 is galaxy S2 ( you are in the wrong forum).
you can flash .tar file using odin or .zip as update.zip using CWM to solve the problem. Try My Guides and Manuals link below for your phone specific links
ops iam sorry for that...
which file shoud i flash sorry i newbee @ that
memo hamdy said:
ops iam sorry for that...
which file shoud i flash sorry i newbee @ that
Click to expand...
Click to collapse
suggest you try factory reset in CWM first, as that would solve CSC problems..
FIRST STEP for ALL Problems:-
Whenever you have a problem with your Phone, power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and trying any solution
xsenman said:
suggest you try factory reset in CWM first, as that would solve CSC problems..
FIRST STEP for ALL Problems:-
Whenever you have a problem with your Phone, power it down, remove battery, remove SIM card and Ext SD card and press and hold your power button for at least 30 seconds to a min, before reinserting battery and trying any solution
Click to expand...
Click to collapse
i tried to do that but the recovery dont make it sir ..look @ forum.xda-developers.com/showthread.php?t=1713419
Due to this error one can not do anything in recovery like backup, restore,wiping,flashing roms , etc. and which is very annoying. This happens because the CWM reject or failed to identify the root access of the device.
can i find recovery img for my phone?
memo hamdy said:
i tried to do that but the recovery dont make it sir ..look @ forum.xda-developers.com/showthread.php?t=1713419
Due to this error one can not do anything in recovery like backup, restore,wiping,flashing roms , etc. and which is very annoying. This happens because the CWM reject or failed to identify the root access of the device.
can i find recovery img for my phone?
Click to expand...
Click to collapse
1) What is your phone model?
2) when certain files are unavailable or cannot be located best option is to save all your important files ( in CWM , go to mount and storage, mount USB Storage and use USB cable to your PC...copy all (the entire SD card to your PC), After which you flash a stock ROM ( according to your model) using Odin in download mode.
---------- Post added at 08:19 AM ---------- Previous post was at 07:59 AM ----------
Most Recovery tools and files can be found on My Android Collections link below, you can even use AndroPlatina Utilities to factory reset your phone
my phone model is gt 9100 international version
when i tried to flash via odin it works pretty put when i root that stock rom and appear su icon on my menu the apps required root tell me that threre is no root acess ....
and when i flash custom rom like omega after that i stuck at samsung logo and cwm tells me
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
memo hamdy said:
my phone model is gt 9100 international version
when i tried to flash via odin it works pretty put when i root that stock rom and appear su icon on my menu the apps required root tell me that threre is no root acess ....
and when i flash custom rom like omega after that i stuck at samsung logo and cwm tells me
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
Click to expand...
Click to collapse
Basically, you should post here for i9100 http://forum.xda-developers.com/forumdisplay.php?f=1055
Even than, your problem may be solved by flashing the correct version of CWM, so best you start from the beginning, read this
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
egomezmx said:
Hi, I hope some can help me
Here´s my story, the phone is a Galaxy Ace GT-S5830m, that had GingerBread 2x, I wanted to take it to Kit kat 4x, then I downloaded the CWM 6.0.4.6, but, because of my ignorance, I didn't downloaded the KitKat rom file at the same time, I successfully installed the CWM file, but after this the phone won't boot. The only thing it does is:
Enter recovery mode by pressing Volume Up+Home+Power
Show the Samsung logo
But I cannot make it enter download mode, if I hit VolumeDown+Home+Power it just shows the Samsung logo
If I connect it to the PC via USB cable, the PC won't recognize the phone on the USB drivers list. I already downloaded the Samsung USB drivers
When I enter recovery mode I see the four options for
rebbot system now
apply update from sdcard
wipe date/factory reset
wipe cache partition
And below that I see --Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
What can I do? I'm I done? Please help! Thanks!
Click to expand...
Click to collapse
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
more questions
Raakib Zargar said:
Hi
Flash a custom recovery like cwm v5 n then erase all like data sytem etc then download the .zip file that roots ur fone n flash it n then do a wipe data n thn place any custom rom of ur device n flash. . . If dsnt wrk do tl me
Hit Thanks
Click to expand...
Click to collapse
Hi Raakib, thanks for taking the time to answer! But how can I put the cwm v5 in the phone if the PC doesn't see the phone? Sorry for the basic questions? I'm new in this things. The first time I did this I pluged the phone to the PC and I was able to see the memory card in the windows explorer so I only did a drag and drop, but that doesn't work any more, please advice, thanks!
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
still no luck
Raakib Zargar said:
just do 1 thing download the recovery file on your pc and then plug your sd card using any sort of card reader and then copy the file to memory card . Then insert the memory card in the phone and go to recovery and flash it. Hit thanks.
---------- Post added at 03:30 AM ---------- Previous post was at 03:28 AM ----------
if u want that your pc should recognize your phone, take it to download mode and see it gets detected in odin or not , if not then swap the drivers maybe upgrade or downgrade.
Click to expand...
Click to collapse
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
egomezmx said:
Hi Raakib, just to let you know that I haven't had any luck with this, this is what I have tried, with a memory card reader connect to my PC, because the PC still doesn't see the phone
Using CWM v5.0.2.6 and with that version trying to install the original rom I get this
-- Installing: /sdcard/Downloads/S5830MUMnD1_S5830MTCEND1_TCE.zip
Finding update package...
Opening update package...
Installing update...
Installation aborted.
So my attempt to recover gingerbread was unsuccessful, now, in all honesty I have no idea if I'm using the correct zip file of gingerbread, I mean, I downloaded from the sammobile page and choose the one for my country, but the instructions call for odin and to unzip the fiel, so I don't know if this zip file can just be copied to the SDcard and be unziped with CWM. So CMW needs special rom files different from the ones odin uses?
On my second attempt using CWM 6.0.4.6 to try to install kit kat 4.4 using the instructions from the androidcure website called "How to install Android KitKat on Samsung Galaxy Ace S5830", it mentions that I must use cwm v6 and the rom file called cm-11.0.0-RC4-GT-S5830-cooper-PS.zip I get this
-- Install /sdcard/Downloads ...
Finding update package...
Opening update package...
This package is for "cooper.GT-S5830" devices: this is a "".
E:Error in /tmp/sideload/package.zip
(status 7)
Installation aborted
If I use cwm v5 to try to mount /system (which is permanently un-mounted) I get this
mount: mounting /dev/block/stl9 on /system failed: Invalid argument
W:failed to mount /dev/block/stl9 (File exists)
W:failed to mount /dev/blockstl9 (no such device)
Error mounting system!
The phone still won't go in download mode and is still not visible by the PC
Any other suggestion? Thanks!!!!
Click to expand...
Click to collapse
the stock/original rom wont flash in the recovery. try to flash some other custom rom in CWM 5 and before flahing any rom you need to do a full factory reset and whether in cwm5 or 6 i m nt sure go into advance and wipe efs etc there then flash a rom. If still nothing then contact me i will tell you some great thing +918715031141. (my personal number)