Related
I'll do a more detailed review tonight and switch out the photos with better ones too.
First impressions: Holy crap this is huge!
It is very reminiscent of the commuter series for the HTC Hero (of course). However, this one feels a bit more "rugged".
The case has the standard plugs for the headphones and microusb ports. It also has the raised areas for the volume rocker and on/off button. The front is well protected and thick enough to not really have to worry about placing the phone face down.
It was much easier to attach than the Sedio Innocase! And conversely, it's a PAIN to remove (which is a good thing!)
It takes about the same amount of force to slide open the keyboard. It's borderline too hard for me.
Oh, the keyboard lights aren't completely covered either! Granted you still can't see them looking directly down at the phone, you can see them if you tilt the phone back a little.
My initial qualms are:
1) The case is slightly too long for the phone. The top of the case that is around the keyboard is loose. Not just a little, but it looks like it wasn't even meant for this phone.
2) Like the mini-usb plug on the Hero's commuter series, the micro-usb plug on the Shift's commuter series doesn't want to stay in.
3) Since the back side is beveled and it's semi-hard to slide out, it sometimes takes a couple tries because it keeps slipping out of my hands.
Nit-picks:
1) Backside cover is off-center (flash/camera/speaker aren't centered in their respective cutouts)
2) No silicone on the front so when it's face down it slides around easily (compared to the hero which had silicone bumpers on the front)
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Rooster85 said:
Where did you get it from? Still says preorder on my end
Sent from my MiuiSpeedy with that Premium XDA App
Click to expand...
Click to collapse
Otterbox.com EVO Shift 4G Commuter Series
southernstyle said:
just ordered mine, hope its protective. It feels good to raw dog, but its dangerous.
Click to expand...
Click to collapse
It's does a very good job of covering up the phone and not being loose.
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
got mine in today, very pleased. although it was a little bit of a b*^&h to put on. After getting it on I noticed the usb plug being a pain, and the power button seems to need a lil extra force to actually click, but other than that love it. I feel safe now
Good review, disappointed, love my Otterbox's for my EVO and HD2. The split covers though, Shift and Tilt (from experience), just do not seem to provide the same kind of coverage but I do not know what else they could do to make them better.
nativ73 said:
Got mine today, as wizputer noted the mini-usb isn't snug enough to remain in the port. Otherwise, very impressed with the design and construction of the case.
Click to expand...
Click to collapse
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Rooster85 said:
I ended up cutting my usb plug off because of the headache it was causing.
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
kbrn said:
Actually you just have to know how to make it stay there's a little trick to it when you close it. You have to kinda pull the thing up a little bit and then slide it in and stays. That's how mine works anyways ..
Click to expand...
Click to collapse
Oh well, too late. The microusb doesn't need to be covered really anyways
Sent from my MiuiSpeedy
I just always wiggle the flap into the port, best case by far would definately recomend. ORDER FROM OTTERBOXS WEBSITE, when it first came out I tried it from amazon (it was $10 less) but the expected shipping date was in june.
No I'm not using Tapatalk... I'm using the XDA Premium app, cause I got balls.
Be careful with the otterbox guys, dropped mine for the first time today and 3 of the 4 clips to hold the back on broke, making the case absolutely useless..... waste of 30 bucks!
Sent from my MiuiSpeedy
When. That happens call otterbox and they will no auestions asked replace it usually takes 1week shipping I've had 5 so fardo this and most recently they sent me 2x so I don't need to calll next timeill. Be prepared...love this company
Sent from my PG06100 using xda premium
+1 to that . They have like you said Replaced mine about 4x's. Never once asked for anything but my address. Best company ever . Have since bought Otter Boxes for all my Devices.
I got this case mid August, and about a week ago, I dropped it. While in free fall, the top of the case just fell off my phone and broke in half. Sad thing is, I dropped it from about 2 feet. But yes, I called it in, and they are sending me in another, just have to watch out for my phone a bit more! (At least I get to replace the screen protector, put it on kinda bad, XP
So I just wanted to start a thread for myself and anyone else who may want to read it
Basically anyone who has an otterbox case for the evo shift or has seen/used it or whatever just leave your opinions/reviews whatever. I am thinking of buying one so just wondering
I don't have one for the Shift but I've used an Otterbox on other devices and would recommend it if you have the slightest fear of damaging your handset.
I believe the last one I used was a Commuter which completely encased the handset and seemed to be able to take a hit. The back was too smooth for me so I had a little trouble re-learning how to hold it and the thickness of the handset increased significantly but overall it felt safe. Worth the extra money.
I am using the otterbox commuter case on my shift right now. I like it a lot. The fit and finish seems like it is completely a part of the phone. Only two complaints are:
1. If I try to move an icon from one hone screen to another, the piece covering the screen makes it difficult to move it to the "edge" - not a big deal, you learn to adjust.
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
All in all, I think it is a great case and makes me worry a lot less about dropping my device. I would definitely recommend it.
Sent from my PG06100 using XDA App
Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.
notsointeresting said:
Awesome seems like ill want to pick it up. I recently cracked the screen on my shift and made a few scuff marks so that's what seriously turned me to getting the case.
Click to expand...
Click to collapse
Tip for putting on the included screen protector...patience and a clean work surface! I couldn't get it to work well at first, then I ended up dropping it on the carpet. I was ready to give up on it until my wife took it from me and got it to work. So...if you have the patience of an ADHD kid on meth like I do...lol. It was my first screen protector too so. Anyways have fun!
Sent from my PG06100 using XDA App
definitely worth getting. i have the commuter series otterbox and it makes my phone look and feel like a beast. only thing that annoys me sometimes is the dust/lint that gets stuck to the rubber on the case, but i just blow it off.
zeke803 said:
2. When opening the slider, I hear a click sound, sounding like the little tabs holding the upper piece on are catching as it moves. Again, kinda not picky.
Click to expand...
Click to collapse
I haven't had a problem opening the slider at all.
I have one and love it! Top of the line case, looks good feels good and protects good! I would totally recommend it to anyone with a Shift!..
I use it on my shift, and have had them on two other phones. Like everyone else said, its a great case, and really does look like a part of the phone.
Sent from my PG06100 using Tapatalk
I'm now on my second otterbox after a free factory replacement, my only nit pics are the usb port cover doesn't stay closed, and it clicks everytime I open it, feels like one of the clips is catching....
Sent from my MiuiSpeedy
Just got the Commuter series and I'm a fan so far. Makes the phone feel more substantial and gives a better grip. The only issue was with the headphone and USB port covers, which didn't stay down. I just removed them, but DON'T Rip them off, it'll tear the rubber casing. Found that out on the USB port one so I cut the headphone one off. Either way makes the rubber a little loose around the port but not hugely annoying unless you're a perfectionist(which I can be). I'll just apply a little glue and seat it on the plastic frame.
Sent from my PG06100 using XDA App
Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.
notsointeresting said:
Thanks for the answers guys! I'm definently going to pick one up in a couple days.
I do want to keep this thread open just so anyone can ask questions/leave other reviews for other people.
Click to expand...
Click to collapse
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box
wcherin said:
Got the Otter Box Commuter of Ebay for 24.97 free shipping. in retail box
Click to expand...
Click to collapse
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.
notsointeresting said:
That's great. The retail price from otterbox.com is $35 so thats a great buy. There's just something about ebay that I can't trust lol. That's me and my paranoia tho.
Click to expand...
Click to collapse
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)
kbrn said:
Check also Amazon I got mine for about the same price .. 20 something and It's safer than eBay (for me it is)
Click to expand...
Click to collapse
Wow I found one for 22 on amazon thanks for the tip man
Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G
Xx12thANG3LxX said:
Once you have the front plate on the phone. How the hell do you get it off????
Sent from my HTC Sensation 4G
Click to expand...
Click to collapse
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy
Rooster85 said:
Its almost inpossible without breaking the case. I broke one of the clips in the process..... thank goodness for a warranty!
Sent from my MiuiSpeedy
Click to expand...
Click to collapse
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?
notsointeresting said:
I guess that's not technically a bad thing if the fronts hard to get off.
I just hope the back isn't the same when I get mine.
Is it?
Click to expand...
Click to collapse
Nope I can confirm that, being really careful you can take the back without any problem..
I Think that the front parts being hard to take off it's a good thing.
Had mine for 2 or 3 months now
Bought it from Amazon for like $25 when they finally came available for the shift and had to wait a month before I got it in hand.
I'm not as impressed as i would be with the protection if it was a defender case. I had the black case with fake carbon fiber and belt clip before. The otterbox commuter is better then that one, by how much I'm not sure.
I dropped my phone about a month ago. I don't know if it just hit the right place of the case, and the back case came flying off the phone, the side clips where busted off, so the back case would not stay on any more.
I decided to call up otterbox and see if it was under warr. and if they would replace it. AMAZINGLY they said YES so they shipped me a new one for free i didn't even have to pay shipping. NICE. It was quick and easy I thought that was soooo cool. Because of that i will continue to buy otterbox, and recommend them to others.
In future i hope to buy defender cases (better protection) which means no more slider phones which i think i am ready for now that touch screens are so much better. All my old phones have been sliders with full keyboards from back in the day with my old HTC t-mobile MDA, which made me find this site.
Thats my 2 cents.
Lasted me just abt six months of light regular use. It's still on this phone as i write and its protective capability is still almost all intact, but the plastic and silicone are both breaking down: Replacement time.
The plastic of both the inner case and the protective belt clip is somewhat brittle. The retaining tab on the belt clip that holds the phone in, snapped off after less than a month rendering the belt clip useless, as it wouldn't hold the phone anymore. The little snaps that clip the inner case halves together are beginning to go; two of them broke in the last couple weeks.
These both look to me like design issues where the characteristics of the material used weren't accounted for as well as they might've been.
The silicone is tearing in a couple places, around the volume button and one of the plastic nubbins that the belt clip tab clicks into. This last tear is progressing out to the edge of the case, another 3mm or so to go.
i liked this case; phone felt really safe with it. i liked the really tall lip around the screen that made the phone super-easy to hold, even as it made typing a bit of a challenge with the "keys" at the edge of the screen. This is a big plus as this isn't the easiest of phones to keep a safe grip on while using it.
The built-in screen protector isn't so hot as it let dirt get in at the top between it and the screen, and also doesn't contact the screen at one bottom corner so one has to press down with disproportionate effort there to get the touch to register. It's where the keypad is so slows down typing.
Overall i'm glad it's on the phone. It's big and heavy and clunky and keeps the device well protected from harm and easy to hold on to. It's also one of the costliest cases and i was hoping it'd last me at least a year: i'm a fairly careful guy too, don't beat mercilessly on my gadgets or anything.
Think i'll try the Ballistics SG case next.
Sent from my HTC-X710a using XDA
lowfatmilk said:
t
i liked the really tall lip around the screen that made the phone super-easy to hold,
Click to expand...
Click to collapse
-- This tall lip is a part of the polycarbonate hard inner case and the screen protector is glued to it at the bottom. Makes for a very secure thumb hold and i expect will be one of the features of this case i'll miss.
Sent from my HTC-X710a using XDA
lowfatmilk said:
Lasted me just abt six months of light regular use. It's still on this phone as i write and its protective capability is still almost all intact, but the plastic and silicone are both breaking down: Replacement time.
The plastic of both the inner case and the protective belt clip is somewhat brittle. The retaining tab on the belt clip that holds the phone in, snapped off after less than a month rendering the belt clip useless, as it wouldn't hold the phone anymore. The little snaps that clip the inner case halves together are beginning to go; two of them broke in the last couple weeks.
These both look to me like design issues where the characteristics of the material used weren't accounted for as well as they might've been.
The silicone is tearing in a couple places, around the volume button and one of the plastic nubbins that the belt clip tab clicks into. This last tear is progressing out to the edge of the case, another 3mm or so to go.
i liked this case; phone felt really safe with it. i liked the really tall lip around the screen that made the phone super-easy to hold, even as it made typing a bit of a challenge with the "keys" at the edge of the screen. This is a big plus as this isn't the easiest of phones to keep a safe grip on while using it.
The built-in screen protector isn't so hot as it let dirt get in at the top between it and the screen, and also doesn't contact the screen at one bottom corner so one has to press down with disproportionate effort there to get the touch to register. It's where the keypad is so slows down typing.
Overall i'm glad it's on the phone. It's big and heavy and clunky and keeps the device well protected from harm and easy to hold on to. It's also one of the costliest cases and i was hoping it'd last me at least a year: i'm a fairly careful guy too, don't beat mercilessly on my gadgets or anything.
Think i'll try the Ballistics SG case next.
Sent from my HTC-X710a using XDA
Click to expand...
Click to collapse
You know otterbox will replace it for free
Sent from my HTC PH39100 using Tapatalk 2
jerrycoffman45 said:
You know otterbox will replace it for free
Click to expand...
Click to collapse
Really?! i had no idea.
i did mail them when the belt clip holder broke but never heard back.
Sent from my HTC-X710a using XDA
lowfatmilk said:
Really?! i had no idea.
Click to expand...
Click to collapse
... erm ... i wasn't trying to be snide-- very sorry if i gave that impression. Just meant that the possibility of getting it replaced hadn't occurred to me.
Sent from my HTC-X710a using XDA
lowfatmilk said:
... erm ... i wasn't trying to be snide-- very sorry if i gave that impression. Just meant that the possibility of getting it replaced hadn't occurred to me.
Sent from my HTC-X710a using XDA
Click to expand...
Click to collapse
no worrys did not take it that way i went to sleep and didnt see your post go to their webpage and click on contact and email your problem they will email you back asking for a pic of the case showing the damage with the otter box symbol visable also with a piece of paper with your name address and the date this is to prove ownership and they will send a replacement also if you got it at the att store they will replace it for free up to a year
Note that only some AT&T stores will. It's manager discretion and some will be more agreeable to it than others.
Otterbox breaking clips
I have had the same problem with with my Otterbox box case, the small clipe that hold the plastic case close keeps breaking after i have to open it up to clean my screen on my HTC vivid. Because the top is open, I'm cleaning my screen a lot.
just contact the supplier through their site and tell them what happen, and they will send you a new case for free. I'm on my second case now. it seems that they know there is a problem with those fragile snaps.
Willibda1 said:
I have had the same problem with with my Otterbox box case, the small clipe that hold the plastic case close keeps breaking after i have to open it up to clean my screen on my HTC vivid. Because the top is open, I'm cleaning my screen a lot.
just contact the supplier through their site and tell them what happen, and they will send you a new case for free. I'm on my second case now. it seems that they know there is a problem with those fragile snaps.
Click to expand...
Click to collapse
I ended removing the included screen protector from the otterbox and installing a cheap one from ebay. Now I don't have any dirt on the screen and it also look a lot better/clearer.
Yeah I contacted otterbox about replacing my case
Sent from my HTC PH39100 using xda premium
New case is on its way
Sent from my HTC PH39100 using xda premium
valve timing said:
New case is on its way
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
Similar things are going on with my case, and I'd like to see if I can get a replacement also. What/How exactly did you go about contacting them to get them to do this?
joseph881 said:
Similar things are going on with my case, and I'd like to see if I can get a replacement also. What/How exactly did you go about contacting them to get them to do this?
Click to expand...
Click to collapse
Go to there webpage and go to customer support and email them about the problem and they will contact you
Sent from my HTC PH39100 using Tapatalk 2
Mine lasted over a year, and that's with frequently pulling it apart to pull the battery. Now half of the plastic clips that hold it together are gone, and the rubber flap for the USB port is starting to tear, almost ripping off. If you pay attention when taking it apart, it should last way longer than a year. My only gripe is its a bit bulky, not very pocket friendly.
Sent from my De-Sensed HTC Vivid using Tapatalk 2
I'm on my 2nd Replacement case as I have broke 2 belt clips within 2 months. Otterbox has been excellent about sending a replacement in both instances. I also removed the built in screen protector and have purchased a different one from Amazon. Overall the case has been decent. Happy with it for the most part. I still am using the actual case from the original but now a couple of the tabs have broken off the polycarbonate shell. Guess I will have to switch out for one of the replacements they have sent me. Unfortunately the belt clip seems to have been the most fragile part for my experience.
Wow i haven't used my otterbox defender, cause one of the clips, of the inside broke, the screen protector is almost gone (its broking) and the outer layer of silicone doesn't like, glue? Stick to the hard case!! I'm going to contact otterbox and see what they said! Thanks guys!!
Sent from my HTC PH39100 using xda premium
So, last night i went to otterbox web page, i clicked on the warranty one, fill out the info and clicked submit, after that, i received a message confirming, and saying that i needed to send pics of the case showing very clear the damage, and in a paper, my name and today's date, i did, and 9 hours after that, i received and email, saying resolved issue, and a confirmation that a new blue defender have just shipped!!!! so happy with Otterbox!!
Sent from my HTC PH39100 using xda premium
My little tabs that snap the plastic case together are starting to bite the dust. This may seem like a dumb question, but when inquiring for a replacement do they require a receipt? I bought the case off of craigslist.
Miniloaf said:
My little tabs that snap the plastic case together are starting to bite the dust. This may seem like a dumb question, but when inquiring for a replacement do they require a receipt? I bought the case off of craigslist.
Click to expand...
Click to collapse
No receipt required. The photo with the case and your name and today's date is all the proof of ownership they need. I finally sent my info in last night, got the reply email, emailed the photos and today got the email with the Order Confirmation. The only odd thing is that I put in my PO Box as my address, but the order PDF says it's shipping via FedEx. I wonder how it will work out.
joseph881 said:
No receipt required. The photo with the case and your name and today's date is all the proof of ownership they need. I finally sent my info in last night, got the reply email, emailed the photos and today got the email with the Order Confirmation. The only odd thing is that I put in my PO Box as my address, but the order PDF says it's shipping via FedEx. I wonder how it will work out.
Click to expand...
Click to collapse
i have the cheapest otterbox version for my phone so when i went to fill out one to get a new one i accidentally click on Otterbox Defender so when i woke up it said photo ect... like you said I said I was like **** i'll do it later not even a couple hours later it said i got a new one being shipped out i didn't even give em a photo yet since I got the impact series
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Nice review! The case looks better than I had imagined.
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
regalpimpin said:
I got the same case delivered on Saturday. Works well. Feel a lot safer carrying it around to and from work now.
I may get the slim fit version as well at some point so it isn't quite as thick, but it does feel solid in this thing.
I notice you have a skin on the back of your nexus. Does it get in the way with the case at all, and if you pull the tab out of the case, has it mangled the skin at all on any pressure points?
I have a skin as well but am reluctant to put it on for this reason, and being that the back is rubberized i dont feel like it really needs it in the first place.
Click to expand...
Click to collapse
Yes, I have an XtremeGuard body protector on it and it doesn't get in the way. I've taken it out of the case a few times and the protector's not bunching up. The protector's been on the Nex7 for over a week, so it's cured pretty well. I wouldn't try it on a fresh protector install. I'd give it about a week so that it sets right before putting it in a case like this.
Prey521 said:
Here's the case:
http://www.amazon.com/gp/product/B007S9ZSGW/ref=oh_details_o06_s00_i00
It has all of the correct cutouts. I also like that the speaker cutout is open, as opposed to a bunch of holes like I've seen in other cases. It does add some bulk due to the fact that it can rotate 360 degrees, but it not enough that I can't slip it in my rear pant pockets. It has a loop for the stylus, as well as the magnet wake/lock. It also doesn't have the flaw that other cases have where it locks the tablet when you fold the cover back against itself. I like the white stitching and the fact that it doesn't cover the bezel, which is a deal breaker for me, since covered bezels tend to hinder you when navigating the UI. It also has deep grooves so that it doesn't slip when you have it propped open. Also, when in Portrait mode, you can only use it on the last groove. Any of the other 2 grooves can't support it. When it is on the last groove, I can use it without feeling like it's going to fall back, so it's supported very well in that aspect.
This is the same case that I have for my Blackberry Playbook, and on that back of the Playbook, it has the Blackberry Logo, which you can see through that open hole in the back so it looks nice. On the Nexus, there's no logo or anything on the back that shows through the hole, so I wish that it was covered for the Nexus version. Another small gripe would be the location of the Stylus loop.....if you have the case open and you have a stylus in it, the tab will be at a slight angle. I tested it and it doesn't take away from the sturdiness of it, just a small observation.
All in all, I'm happy with it so far. The seller refunded me the money since I was supposed to receive it last week and it got lost misplaced somewhere in shipping and ended up getting routed to Cali first before coming here, so I give him props for great customer service.
Click to expand...
Click to collapse
Picture #3, how did you get traffic webcam as widget? Seems useful.
taC nayN said:
Picture #3, how did you get traffic webcam as widget? Seems useful.
Click to expand...
Click to collapse
Ah, that's not a traffic cam widget....that my News360 App widget and the headline was for an overturned truck on a highway near my house lol
LovelyLush said:
Thanks for the review. Really wish they had more color choices! I want a case that sits portrait (I read a lot) & landscape (Netflix). I already have a case for now, but I'm looking to replace it with one that does everything I want... like this one! I'll wait it out a bit & see if they come out with more colors.
Click to expand...
Click to collapse
I'm OK with the black case.....never been a fan of colorful cases. If I had to pick 1 other color, it would probably be like a dark blue.....nothing girly LOL
Nce review ty, I like the case seems decent for protection...even tho a tad thick. I think I well get this one even so based on the review plus I like the look.
Nice right up. Off subject what ROM are you running?
superman.namrepus said:
Nice right up. Off subject what ROM are you running?
Click to expand...
Click to collapse
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Prey521 said:
Modaco JR6 with the Motley Kernel....runs like gangbusters!!
Click to expand...
Click to collapse
Haha, that was going to be my question
Metalor696 said:
Haha, that was going to be my question
Click to expand...
Click to collapse
I have switched in the last few weeks to the Paranoid Android ROM with the Trinity Kernel. It runs great.
Thought about this case as well, but went with the official travel case.
Bought this case because of your review. It's exactly what I was looking for. Thanks.
Sent from my Google Nexus 7 using Tapatalk 2
I have a similar one bought off ebay. I'm happy with it. The only downside of that case is the circular bit at the back where it rotates.It can potentially scratch the back of the Nexus 7 so I have put a clear protective plastic on the back of the N7.
I've had my Gear 2 Neo for 22 days now. Today, I noticed for the first time more than just scuffing. I'll let a picture do some better explaining...
I haven't been doing anything extreme, just working at my desk in my office. There is some significant metal transfer onto the surface of the desk. I had no idea it would get this bad.
What do you guys think? Is this something I could get covered under warranty?
Does anyone else have this problem?
BigDanInTX said:
I've had my Gear 2 Neo for 22 days now. Today, I noticed for the first time more than just scuffing. I'll let a picture do some better explaining...
I haven't been doing anything extreme, just working at my desk in my office. There is some significant metal transfer onto the surface of the desk. I had no idea it would get this bad.
What do you guys think? Is this something I could get covered under warranty?
Does anyone else have this problem?
Click to expand...
Click to collapse
Wow thats bad, wish i left the plastic packing wrap on mine, but so far nothing like yours
obsydian said:
Wow thats bad, wish i left the plastic packing wrap on mine, but so far nothing like yours
Click to expand...
Click to collapse
I tried to leave the packing on my Gear 2 but it peeled itself off within the first hour of wearing it.
That's pretty bad IMO, especially for just desk work. What type of desk? I didn't leave my original watchband on very long, since I thought it looked pretty cheesy. I bought a 22mm $20 leather watch band online and it looks and feels much better than the rubber strap that comes with it.
I would try and get it replaced under warranty but i guess they will tell you its your own fault etc..
If you still want the rubber straps, i would suggest, buy new ones on ebay and then get the cheapest `copter` displayfilm you can find and cut it to fit the buckle, should not have any more scuffing like that.
I too have a deskjob and i have nothing near the scuffing you have. Last week i got my carbon look skin from Skinomi and it came with a sticker for the buckle, atleast it will save me from some wear and tear onbthe buckle.
Sent from Galaxy no. N5120 via the LTE-network
my buckle came apart on my gear 2 neo cant figure out if there were screws in these holes or how it was held together , also I cant seem to locate original straps on eBay.