[Q] Help with Clockwork Recovery - Captivate Q&A, Help & Troubleshooting

I installed ROM manager and flashed clockworkmod recovery but when I hit reboot into recovery it goes into the normal android recovery screen. I also tried doing a backup of my old rom but it just reboots into stock recovery screen and doesn't actually do the backup. I tried installing ROM from SD, same thing. I've tried different recovery versions (2.5.1.1, 2.5.1.2) but they all do the same thing. I'm rooted and it has superuser permissions, so that's not the problem. I have ROM manager premium. I've tried uninstalling and reinstalling ROM manager. Please help.

Try installing it through stock recovery. (reinstall pakages)

What firmware you using?

rom manager is only good for eclair and froyo
there isnt a correct update.zip for the captivate on gingerbread.
if on gingerbread flash a kernel with CWM (clockwork) built in.
if on froyo/eclair you must select *reinstall package* from android recovery TWO TIMES in a row!

except FROYO has recovery3e also.....it will not allow unsigned update.zip files.

Ok. I'm on Froyo 2.2. Stock firmware. Trying to get either Fasty II or Cyan. First time doing all this. All this started with the GPS problem... (I know, I know. There's a thread for that.) Plus, I am interested in other ROMs. Just praying I don't kill my phone in the process.

you need to look at Odin/heimdall a CWM kernel, or fixing your recovery 3e to accept unsigned zips

^That. Fasty II needs Gingerbread bootloaders

OK. Well, really, I think I'd like to go Gingerbread. I dunno. There's too many to choose from. I want to get CWM working first. Where's the forum to install manually? There's so many places to look...

If you are going to GB flash a leaked stock first that contains boot loaders. Does your phone take well to 1 clicks?

Augh! I used Odin to flash the kernel. I had a temporary success. I had cwm up and it backed up my old rom. I rebooted twice into cwm. Third time, it reverted back to old android recovery. Like I said... Augh!
-Typed while driving on my Captivate- []

Flashed it again. Got CWM back up. Now, moving on to figuring out getting gingerbread. Any tips here are greatly appreciated as long as they make sense.
Also, what is 1 clicks?

Odin 1 click that will flash a leaked stock rom like 2.3.3 KF1 or 2.3.4 KH3 or 2.3.5 KI2. If they include Bootloaders you can just flash a cwm kernel and ready to flash any rom you like.

Related

[Q] Galaxy S 2.2 CWM Issue - Help!

Hey Guys,
I have an International I9000 Galaxy S.
The problem is that I have installed 2.2 Froyo through Kies, then rooted and attempted to install ClockWorkMod with ROM Manager. Whenever I flash and boot recovery, I'm taken to the 3e Recovery Menu, not the CWM Menu.
I can't understand why it refuses to boot :/
Please help a noob
Anyone? .
hi
ive never used rom manager so cant comment on that but why dont you go into dev forum and check out the roms there and on the OPosts theres directions that are easy to follow
most of the kernals have recovry built in
regards
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-galaxys.zip
I'm not entirely sure, as I don't use Rom Manager either, but I believe that only flashes it so you're only able to access it using Rom Manager. Is there any option within Rom Manager that allows you to boot into CWM?
In my opinion your best bet would be to flash a kernel with integrated CWM, or ideally a whole new custom rom. Much easier.
icecold601 said:
Hey Guys,
I have an International I9000 Galaxy S.
The problem is that I have installed 2.2 Froyo through Kies, then rooted and attempted to install ClockWorkMod with ROM Manager. Whenever I flash and boot recovery, I'm taken to the 3e Recovery Menu, not the CWM Menu.
I can't understand why it refuses to boot :/
Please help a noob
Click to expand...
Click to collapse
Reason being is because 3e does not work with CWM. Only 2e is supported. Check the CFRoot thread, and if your rom falls into the firmware listed, you're in luck. Otherwise, like myself on Froyo JK4, I need to downgrade to 2.1 via Odin, then reboot into CWM.
stan28 said:
Reason being is because 3e does not work with CWM. Only 2e is supported. Check the CFRoot thread, and if your rom falls into the firmware listed, you're in luck. Otherwise, like myself on Froyo JK4, I need to downgrade to 2.1 via Odin, then reboot into CWM.
Click to expand...
Click to collapse
You do not need to "downgrade" you just need to install a different kernel.
I recommend this one http://forum.xda-developers.com/showthread.php?t=822756
Make sure you read through the thread all the answers your looking for are in there.

Clockwork Issue

I used SuperOneClick to root my phone, and now I'm looking through the Captivate Guide to see what else I can do with an unrooted phone. I started with Rom Manager.
So I clicked "Flash Clockwork Mod Recovery," and it was fine. I select my phone (Galaxy S - Captivate, not the Captivate MTD). I pressed "Backup Current ROM," but when I press "Okay," it restarts my phone to the blue menu. So I press "reset phone now," and I try to start from the beginning again. According to the guide, it says to restart it until it works. It's rebooting each time instead with no change. When I go to manage and restore backups, nothing is listed.
When I load up Rom Manager, under "Flash Clockwork Mod Recovery," it just says
"Current recovery: Clockwork mod 2.5.1.2
Latest Recovery: Clockwork mod 2.5.1.2"
Anyone know what I'm doing wrong? I'm using stock 2.2 Froyo and GO Launcher with Cartoon Theme (if that matters).
I've already tried TRusselo's method regarding the 3e issue with stock 2.2 phones: http://forum.xda-developers.com/showthread.php?t=1052991
Do I need SGS Kernel Flasher? If so, what kernel do I need?
/EDIT: Check my post 5 for my latest issue.
Why not just flash a KB1 kernel with cwm in it? I know Desing Gears cog 4.x.x kernels works, and probably eXistZ's kb1 kernel as well. They have cwm cooked in the + few other things like Voodoo, etc.
Also I believe your supposed to click install package as well. I could be wrong since its been a long while since I've used that method.
prbassplayer said:
Why not just flash a KB1 kernel with cwm in it? I know Desing Gears cog 4.x.x kernels works, and probably eXistZ's kb1 kernel as well. They have cwm cooked in the + few other things like Voodoo, etc.
Click to expand...
Click to collapse
I'm much too amateur with phones to do that.
The only reason I decided to finally root my phone was because my warranty is up, and because I found TheUnlocker's youtube account + Captivate guide. I figured with step-by-step instructions, there's no way I could screw up. Boy, was I wrong.
Dude...
http://forum.xda-developers.com/showthread.php?t=1232703 and then
http://forum.xda-developers.com/showthread.php?t=1236891
If you dont want Victory ROM then at least install Boogs Kernel and enjoy Clockwork Recovery!
Steve
Stevenrogers_420 said:
Dude...
http://forum.xda-developers.com/showthread.php?t=1232703 and then
http://forum.xda-developers.com/showthread.php?t=1236891
If you dont want Victory ROM then at least install Boogs Kernel and enjoy Clockwork Recovery!
Steve
Click to expand...
Click to collapse
I plan to use Cyanogenmod 7 eventually. The reason I haven't flashed a ROM is because I'm not 100% sure how yet. That's why I'm taking lots of small steps.
A lot of these ROMs also mention Odin, which I didn't use. I used SuperOneClick.
I went online and tried to flash my phone according to this guy's steps:
http://www.youtube.com/watch?v=6KvCxdYZ0nk
Okay, so even though I followed all of his steps, I get to the part where I'm supposed to find the MIUI file in my SD card, and it doesn't exist... even though I transferred it over. How come my phone doesn't recognize it? Phone is barely functional at the moment after I flashed it back to 2.1, and I'm encountering a lot of lag/bugs. If I plug in my phone to my computer without Debugging on, it fails to download drivers.
Does anyone know the best fix out of this situation?

[Q] Samsung Captivate, froyo KB1, recovery 3e, can't flash recovery?

I've successfully rooted my phone thanks to SuperOneClick, but am not able to figure out how to flash the recovery so that I can use ROM Manager.
I have a stock KB1 image, on an I897 Captivate from AT&T. I'm trying to get the recovery image (currently 3e) set so that I can bypass the signature check, which is what I keep running into.
I installed ROM Manager (the free one, at least until pay day) and tried to use that to flash CWM recovery. Every time I boot into recovery, I run into the confounded signature check.
I have a Superuser app installed from the Market, version 3.0.6(40) and su binary ver 2.3.1-ef.
I'm not typically a dunce, since I've been able to install and run a Linux server at home more than once. But this has got me stumped.
Please let me know what additional information I might need to provide to target guidance.
Read this. Please look at stickies and/or use the search function.
On a personal note, don't waste time on Rom Manager. Its trash for SGS line.
I hadn't seen that list previously. I spent 4 hours last night and three hours today reading stickies and stumbling through search results. That guide for fixing recovery might just be the answer I was looking for.
Is there a different "ROM manager" app that you recommend, or just bare-backing it (which I'm not afraid to do, either)?
Don't bother with it. IMO if you like stock froyo, I recommend just flashing Cognition 4.x.x. Based on KB2 stock looking, but tweaked for speed. CWM is easiest achieved by flashing a kernel with it baked in it.
to skip the recovery crap and rooting and everything else....
take phone out of box. (done)
download and run odin3 flashing util 1.8x Odin3v1.85.zip
boot phone into download mode
flash ginberbread bootloaders http://www.multiupload.com/QQ3LFSRBMD
reboot into download mode
flash custom kernel with CWM built-in pick one in dev section. ANY NOT miui/cm7 kernel in dev section.
reboot into recovery (cwm now!!)
mounts / usb/ copy rom to phone (if not on sdcard already can be done any time before)
cwm flash rom.
** cwm2 kernel for eclair/froyo roms & cwm3/4/5 kernel for gingerbread up
If you goal is to flash a new rom then TRusselo is right. Easier to just flash a kernel with CWM.
Rooted via super 1click and was unable to get clockwork recovery to load said it flashed but would only boot default recovery, soft bricked it 3 times then straight busted it getting the forced upload key press thing had to use USB jig to get download then used Odin to repair firmware some how 3g got switched off. Anyone got any ideas on how to switch back on my guess is key pad access but don't know the code amorphous smart apn from market but don't have the phone yet to try it my friend is gonna bring it this weekend just wanted to find out the best way to switch it back on before I get it back because grs gonna be there this time and I don't want to make him nervous or have him think I'm gonba mess up his phone
Sent from my Evo Running CM7
Stop flashing and read the stickies. If you tried using rom manager or update.zip it wont work unless you fix the 3e recovery issue. Its easier to flash a kernel with CWM baked in to it. For example if you are on froyo Cognition 4.x.x (search for it) kernel should work just fine.

[Q] Can Rooting a Device in a Particular Way Matter?

I have a Samsung Captivate, and keep seeing people talk about CF-Root(I believe it's a program that roots so correct me if I'm wrong). I rooted my Samsung Captivate using Superoneclick. I want to flash Onecosmic's ICS rom for the Samsung Captivate, but people keep mentioning CF-Root. Do I have to unroot, and then re root using CF-Root? Or Since I now have CWM on Android 2.2(rooted stock) can I simply flash CM7, and then flash One Cosmic's Rc3.1 rom. Also can I flash CM7 from Android 2.2, or do I have to down date android back to eclair and then flash CM7. Thank everyone so much, and please help me move this to the correct area if it has already been made before. I searched on XDA and found nothing about "rooting different methods". Thanks again.
Rooted is rooted. If you have cwm then it doesn't matter what os you're on, in fact if you would have just flashed a custom kernel with Odin that has cwm compiled into it you wouldn't even need to root to flash a ROM.
gamerjunglejosh said:
I have a Samsung Captivate, and keep seeing people talk about CF-Root(I believe it's a program that roots so correct me if I'm wrong). I rooted my Samsung Captivate using Superoneclick. I want to flash Onecosmic's ICS rom for the Samsung Captivate, but people keep mentioning CF-Root. Do I have to unroot, and then re root using CF-Root? Or Since I now have CWM on Android 2.2(rooted stock) can I simply flash CM7, and then flash One Cosmic's Rc3.1 rom. Also can I flash CM7 from Android 2.2, or do I have to down date android back to eclair and then flash CM7. Thank everyone so much, and please help me move this to the correct area if it has already been made before. I searched on XDA and found nothing about "rooting different methods". Thanks again.
Click to expand...
Click to collapse
Like Studacris said, root is root. You can also flash CM7 from Froyo. HOWEVER, if you don't already have CWM recovery (which is not the same as being rooted, and I suspect you don't actually have), you won't be able to flash CM7 from where you are now.
If you actually have CWM, you can just flash CM7 from 2.2. If you don't, follow the instructions here: http://wiki.cyanogenmod.com/wiki/Samsung_Captivate:_Full_Update_Guide
to get CM7 and go from there.
Studacris is right, flashing a kernel (any kernel) with CWM from Odin or Heimdall is the easiest way to go, and then use that kernel's CWM to flash from there. Because of Froyo's 3e recovery, rooting it doesn't gain you much in the way of flashing ROMs because the stock recovery isn't going to let you flash anything anyway, rooted or not.
I am rooted, and I actually do have CWM installed( 3 button combo works), but do I need to install CWM the way it says, or is using rom manager to do it ok?. I've rooted 3 inspires and have put the Revolution HD Rom on them. Just didn't want to mess up this Samsung. Thanks for the helpful comments.
ROM manager does more harm than good. Just get cwm and your golden. (by update.zip or kernel with it baked in. 3e recovery won't use update.zip)
gamerjunglejosh said:
I am rooted, and I actually do have CWM installed( 3 button combo works), but do I need to install CWM the way it says, or is using rom manager to do it ok?. I've rooted 3 inspires and have put the Revolution HD Rom on them. Just didn't want to mess up this Samsung. Thanks for the helpful comments.
Click to expand...
Click to collapse
This is what I was trying to explain. Just because you can get to the recovery console does not mean you have clockworkmod, unfortunately.
You have to install it the way the directions say to. You can try using ROM Manager, but it won't work on 2.2. You will get a signature verification error and it will stop. You can try it if you want, you won't mess anything up, it just won't work.
If you really think you already have it, reboot into recovery. If you have it, it will say "ClockworkMod Recovery Version x.x.xxx" across the top. If it does, just flash CM7 from there with the "Install Zip From SD" option. If it says "Samsung 3e Recovery" and doesn't have that option, you don't have CWM and you won't be able to flash anything from there, including a CWM installer.
As far as ROM Manager is concerned, I would recommend steering clear of it in general. It worked well in 2.1 but you can't use it to install CWM in anything since then and you tend to get odd behavior with it when using it to do anything else. Follow the ClockworkMod directions, I have used them several times with no issues.
Thanks apbthe3, you were 100% correct. I see that I have to flash a new kernel with CWM built in, thanks. I thought that it looked differennt than the CWM ON MY INSPIRE so I checked and it didn't load up CWM. Thanks again.
Sent from my Inspire 4G using XDA App

[Q] Can not flash cwm recovery

Sorry for repost, wrong category.
So, here's the story again .
1. I had 2.3.3 xxjvo Gingerbread with cfroot
2. I flashed 4.02, the platypus one
3. I wanted to go back, I used my cwm backup
4. Cwm's were different version -> soft brick
5. Flashed stock froyo with 2e recovery
6. Unbricked phone with dbdata.rar
7. Noticed still have the 4.0.2 kernel
8. rooted the phone anyway with cfroot because no root
9. Got Rom manager, Superuser. Flashed recovery from the app
10. Noticed: still 2e recovery.
11. Tried to reflash. No result.
It asked the permissions and everything, why not work?
Also, is there a way to install a fully stock rom and kernel with odin?
Can 4.0 be flahed with odin?
Instal a stock rom and then flash CF-root from here:http://forum.xda-developers.com/showthread.php?t=788108
I'll try, but I kinda did that already.
Where can I get the original xxjvo rom with the kernel, the links seem to always bee broken!
'
Instal a stock rom and then flash CF-root from here:http://forum.xda-developers.com/showthread.php?t=788108
Today 04:07 PM
Click to expand...
Click to collapse
Man try this:http://androidadvices.com/info/samsung/galaxy-s-i9000/page/4/
I solved this one myself: I made a cwm backp, which messed things up from the beginning, but I knew it was valid.
I got a very similiar rom to my own, flashed it, cfrooted and used cwm to restore the old file:
IT'S UP 'N' RUNNING WITH ALL ITS APPS!
I am so glad, I will probably go to ICS again but now I'll just flash the firmware and use my backup. I gotta love this SGS.
[SOLVED]

Categories

Resources