[Q] network operator connection error - Tilt, TyTN II, MDA Vario III General

hi everybody
so ive installed android on my htc tilt using newest '08/19 patched' and also used 'my mod fresh froyo'. the phone connects to the service provider but its only for a small period of time usually ranging from a couple of seconds to a minute max. i get texts perfectly fine but during calls ill just get dropped. theres nothing wrong wit the cell towers around me. ive tried using 1.65.21.18 and 1.70.19.09 on both with same results. using atools 1.3, newest l1qu1d 2.6.32 (1/6/11), hardspl 3.56
my install is system nand, data sd.
another problem ive been having with this phone which may be completely unrelated... whenever i unlock the radio using kaiser unlocker v2 by olipro, my camera doesnt ever work after. if i flash the radio to 1.70 or 1.65 it works 100%.
and thanks for any help. know you guys are doing alot of great work

Related

How to fix Radio (3G) not working (voice calls, data)

My original HTC (Radio 1.27.12.11) never was able to recieve or create voice calls via 3G nor do any data transfer. Only GSM mode was working, but then for what reason I was going for the Kaiser ?.
Thanks to Pof's work on the HardSPL tool and Dark Simpsons "htc rom tool" and all others contributed to this tools, using the posted french ROM with Radio 1.27.12.17 and the rest from the original HTC rom I compiled a new ROM image.
With this Radio rom I just confirmed that 3G is now working using voice and data. All former 3G problems are gone.
Steps:
- Downloaded original HTC rom and French rom
- Using "NBHextract.exe" to extract the rom components.
- Using the "00_unkonwn.nb" from the french and the rest from the original HTC rom and compile using "htc rom tool" a new rom.
- Now using HARD SPL to install new boot loader and then just transfer the new rom using the original HTC upgrade package with the new rom instead the original one.
Regards
can you post your rom ?
dauphinas365 said:
My original HTC (Radio 1.27.12.11) never was able to recieve or create voice calls via 3G nor do any data transfer. Only GSM mode was working, but then for what reason I was going for the Kaiser ?.
Thanks to Pof's work on the HardSPL tool and Dark Simpsons "htc rom tool" and all others contributed to this tools, using the posted french ROM with Radio 1.27.12.17 and the rest from the original HTC rom I compiled a new ROM image.
With this Radio rom I just confirmed that 3G is now working using voice and data. All former 3G problems are gone.
Steps:
- Downloaded original HTC rom and French rom
- Using "NBHextract.exe" to extract the rom components.
- Using the "00_unkonwn.nb" from the french and the rest from the original HTC rom and compile using "htc rom tool" a new rom.
- Now using HARD SPL to install new boot loader and then just transfer the new rom using the original HTC upgrade package with the new rom instead the original one.
Regards
Click to expand...
Click to collapse
can you post your rom ?
rom location
Just replace the rom in the HTC_WWE rom-installer with this one. Worked for me without any problems with Kaiser got from UK, but no warrenty
http://rapidshare.com/files/61052345/RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17.zip
Update: After 24h using 1.27.12.17, problems just partly vanished
Looks like it was a bit too optimistic. Here are the results of 24h usage:
-3G voice and data are sometimes working. With the 1.27.12.11 it never worked with 1.27.12.17 it work for some calls / times and then 3G still looks like logged into the 3G-Network, but phone is unreachable. The phone needs to be switched off/on again to get it working. Then one call / data connection / incoming call is possible. After that darkness again. At least one 3G action is possible in comparion to earlier radio rom, but it is still far away from perfect.
It is an improvement but HTC has still to do a better job with the radio rom. Hope we will get an update soon behind 1.27.12.17
dauphinas365 said:
Just replace the rom in the HTC_WWE rom-installer with this one. Worked for me without any problems with Kaiser got from UK, but no warrenty
http://rapidshare.com/files/61052345/RUU_signed_WWE_1.56.405.5_22.45.88.07_1.27.12.17.zip
Click to expand...
Click to collapse
thanks, I'll give it a try in a few days.... as to warrenty - HTC appears not to honor warrenties, HTC US said "not our problem", HTC UK has not answered in over a week....
If yo can live with french try the french rom
... now I run for 24h with the french rom, no customization.
It is better then the HTC with the replaced Radio, posted above. I can call 3G, do data connections and receive incoming calls. It seems after 24h pretty stable. Therefore it looks like changing the radio is not enough and that as the french rom using a slightly newer OS then HTC original, there are some changes too included.
- Problem: Roaming between GSM and 3G, somtimes the phone needs 5 or more minutes to login into the network again after areas with no coverage. Completly different to the Nokia N95, which can handle such issues with no problem @ all
- About HTC service. I called them too and they tried to direct my to a service partner I should pay for getting my problems solved, that is very different to what I understand about warrenty too.
I would be really thankful for anyone who could produce a Radio-only flash available using the French .17 Firmware.
The stock .11 radio ROM is completely, I mean really completely useless for me. Any time I try to write a SMS, make a phone call or data connection my Kaiser immediately loses the connection to the network and I have wait for the phone to reconnect itself. I also cannot receive any incoming calls.
I remember that the first radio ROMs for the Hermes were terrible but this is even worse. Too bad because I'm really enjoying the rest of my Kaiser so far.
It is not only the french radio rom .17 ..
I have done lots of test and added above a rom HTC with french .17 radio stack. But there is more then then just the radio. It is better with the mixed rom, but still not good to use it as a reliable phone.
Best what you can do is using the french rom and you get a 50% chance that 3G works incoming and outgoing.
I'm rather new to creating my own cooked ROMs so I'm right to think if I want to upgrade my Kaiser to the .17 Radio ROM, the only thing I need to do is create a .nbh file from "02_Unknown.nb" and flash the resulting nbh file using CustomRUU and my Kaiser will not be completed formated?
I'm asking this because my Kaiser is now perfectly configurated and personalized and I don't want restart install all my programs, I just want to try the new Radio ROM because the current version is completely useless.
Thanks for any info
well disregard my previous post, I just successfully flashed my Kaiser with the new Radio ROM and hopefully I will actually be able to call someone with my PDA phone.
Hi all, first I have to say that I'm in Dublin Ireland using vodafone and have my kaiser for about 3 weeks now and the most odd thing about that would be that it has been working fine 3G and 3.5G when within good coverage. All of a sudden last sunday it just stopped working with 3G I believe that network provider just changed something with its settings but I can't be sure. I would love to see a radio update soon but since I don't believe in miracles I've been trying some temporary workaround just to be able to call and text. It seems that it enough to go to settings -> phone -> network and set the BAND TO GSM. This way it doesn't use 3G but at least I can use the phone. Hope it could help anyone there.
Thanks for the info, I'll try that eventhough the .17 Radio Update did improve network connection somewhat but it's still subpar.
FYI, I was last Saturday in Dublin, eventhough only for an hour, and of course I tried my Kaiser but the 3G data connection completely refused to work. This was when I still had my .11 Radio ROM installed.
So far I have tried my Kaiser in London, Malpensa, Madrid and Berlin so the issue seems to be rather ROM related than provider related.
you're right, it has nothing to do with the provider I was wrong. I took my card from Era Poland with roaming and turned on my Kaiser. On O2 I had two bars on HSDPA and that beautiful H letter on the top of the screen but not possible to make a call, send sms or whatever. Switching to gsm always works. I upgraded to .17 and it looks exactly the same as it was I see no difference at all. The only thing that bothers me at the moment is that for me it's been working fine for some time. I've been using 3g in Dublin and Warsaw as well and for some reason it just stopped I just hope it's not any hardware issue.
Is this rom posted on #1 a radio only or the whole thing?
I have the same problem over here. I have the Tytn2 for one month now. I had vacation and i took the plane at Amsterdam (Schiphol) to Tenerife.
When i arrived in Tenerife i get a 3G icon and cannot make calls and cannot internet. I had manually switch to GSM band. Now back in Holland with auto-settings i have the same problem again. With 3G i can do nothing (call/internet). Anyone any idea?
I have a vodafona abbo, my simcard in the old tytn1 with same settings works well at 3G. Soon i call with htc!
Same problem here with HTC Tytn II in Holland on T-mobile,
switched 3G to GSM and luckely I can use the phone now,
but I really hope there will be a fix soon!
Thanks!
Same on AT&T
I'm having the same problem with my tilt. I had the 3G before the flash but have not had it since.
same her in nyc ...tried both radios....3g doesnt work....help....please
A hard reset does NOT fix the 3G call/internet problem
When i switch the telephoneband from auto to GSM the phone get's connected at G and i can call. But i want videocall.
Please someone ? Defect or waiting for rom ?
I too am experiencing this problem. It happened overnight one night -- 3G will not connect -- neither voice or data, but GSM (edge) works fine.
I'm on ATT, HardSPL with Schaps 4.22 rom. It was working fine in this configuration, then suddenly stopped. Tried Hard reset (no help), and tried upgrading the radio to .17 (also no help). Next step is to try and revert to original ROM/Radio/Bootloader (per "how to restore to factory for rma thread") to see if that helps.
If anyone comes up with a solution, I'd be grateful.

help! phone isn't working properly :(

Hi all, had my Kaiser a while now and have been using a few different ROMs in this time which have all worked great! The last ROM I used was HyperDragon III. It worked fine for a few days, then started playing up massively. It intermittantly works - Some times I won't receive anything for 3-4 hours, then receive loads of texts and missed calls at once.
T-mobile checked the network, etc. and everything was fine. Re-flashed it back to the original ROM from on here (T-Mobile UK) and it's still playing up the same!
When I put my SIM in a different phone, it works perfectly.
What else can I do/try? I *think* I flashed back to the right radio too but not 100% sure. How do I check what radio/rom versions are currently on the phone?
Thanks!
Radio version can be found @ bootup R: , remeber that the recomended radio may not apply to you as there region specific, so the best bet is to look @ people sigs in your area and see what radio they are using?
Your in the UK try 1.70.19.09 on cooked ROM it's what i always use
R:1.27.15.32
G 22.51.88.13h
D 156.00.00
That's what I got on startup.
For some reason too, when I restart the phone, before it comes to that screen it shows the Hyper Dragon screen first!
I'll try a different radio and ROM then I'm worried it's not a fault with the actual phone..
never mind, advice already given
Well I've upgraded to 1.70.19.09 Radio and Anryl Ultimate Release 3.
Phone seems alright after 20 minutes, but it'll need a few days of testing.
It's not looking good so far - I've just soft-reset my phone and it set the time back to 13:32.. Which certainly isn't the time! It was doing this before when it wasn't working properly too.
This ROM seems incredibly buggy too! Opera keeps closing itself, as well as a few other programs.. randomly!
Help please! I'm frustrated.
jamiepyrite said:
Well I've upgraded to 1.70.19.09 Radio and Anryl Ultimate Release 3.
Phone seems alright after 20 minutes, but it'll need a few days of testing.
It's not looking good so far - I've just soft-reset my phone and it set the time back to 13:32.. Which certainly isn't the time! It was doing this before when it wasn't working properly too.
This ROM seems incredibly buggy too! Opera keeps closing itself, as well as a few other programs.. randomly!
Help please! I'm frustrated.
Click to expand...
Click to collapse
Some times if you don't do a hard reset right after flashing successfully, before the phone set up, things will act buggy. Make sure you do the hard reset.
jamiepyrite said:
Well I've upgraded to 1.70.19.09 Radio and Anryl Ultimate Release 3.
Phone seems alright after 20 minutes, but it'll need a few days of testing.
It's not looking good so far - I've just soft-reset my phone and it set the time back to 13:32.. Which certainly isn't the time! It was doing this before when it wasn't working properly too.
This ROM seems incredibly buggy too! Opera keeps closing itself, as well as a few other programs.. randomly!
Help please! I'm frustrated.
Click to expand...
Click to collapse
This should do the trick. I think the recent Hyperdragon Roms are WM6.1 and the radio you had listed is for WM6.0. This can cause all sorts of hangs/volume problems etc. Also check which SPL version you have - A WM6.0 SPL can also cause hangs etc if used on a WM6.1 rom.
EDIT: sorry, only read the radio bit of the fix.
Make sure you get rom/radio and SPL all matched ie WM6.0 or WM6,1. Most of the latest roms are WM6.1. If you find Anryls rom buggy, just try another one - I love the Garmin series.
Thanks for the advice How would I check which SPL I'm on?
Unfortunately I've hard reset it with Anryl and still running terribly. Lost the network this morning too so I received a text a few hours late.
I think I'm just going to go with a ROM that's as lite as possible now!
Sorted - I've upgraded to Hard SPL 3.28 and I'll flash the ROM to something lighter. Thanks guys
It appears to be working fine except I'm still having the problem of it changing the time!
Just checked the phone and it's saying 16:50.. Although half an hour ago it read the correct time. Any ideas?
I'm using Galarm 1.4 if it makes a difference. Running Athine Lite now.
Sorry everyone - Phone still isn't working properly. On the correct SPL, correct radio and correct ROM.. done a hard reset.. And it still just keeps losing network! Think my phone might be broken in some way?
I *assume* it's under warranty.. I got it under a year ago, but got it due to an insurance claim of my Hermes, they replaced it with a Kaiser.
When I phoned T-Mobile, they said although I got it from the t-mobile store, I'd need to speak to my Insurance company.
BUT I'd need to put it back to standard for Warranty purposes! I've no idea what I'd need to go back to..
thanks everyone
bump - anyone?
jamiepyrite said:
BUT I'd need to put it back to standard for Warranty purposes! I've no idea what I'd need to go back to..
thanks everyone
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs

AT&T 3G Connection Issues

Hello everyone,
I have done a ton of google searches and spent about an hour reading through threads of people with similar problems. I have flashed a few roms and different spl/radios etc. Nothing seems to fix the problem.. Nor have I seen anyone in a post had their problem fixed either - they were just criticized and told to search the forums or read a generic faq on flashing radios..
Anyways, after reading all that and trying a few different radios nothing seems to help.
My device, while connected to 3G, can usually make 1 call when it first connects, then each call thereafter will fail with a beep beep beep.
I am running 3.29.Hard spl
Rom Version TPC_V10_MEGA WWE
Radio Version 1.70.18.02
Protocol Version 25.83.40.02W
Has anyone found a successful combination to correct their issues with the 3g network and their tilt? If you have no issues and have the same phone please post your build.
I have flashed from original roms and a few diff radios to no avail .
I really want my damned 3g to work.. and no I dont want to just manually switch to EDGE (which is what I have my phone forced on now).
Thanks in advance.
same here
I have had the same issue. The phone will show H or 3G and you cannot make a call. I have just accepted using the edge system to keep the phone working fine. The only thing you loose is the faster internet speed the phone otherwise works fine. I have assumed that I dropped the phone and something happened to the antenna. I contacted HTC about the issue and they say it is a hardware issue even though I have seen many speak of the same issue. I have the tilt.
I thought I did the same thing until I started searching and see that there are numerous people with the same issue.
I will just be patient and wait until a new winmobile phone comes out with a oversized screen! Hope the next xperia is that
Radio Issue
I had the same problem with that radio. I changed back to the 1.65 radio and everything worked properly again. I hope this helps.
See my sig for what I am running. I have run TPC's roms as well as others and almost every 6.1 compatible radio there is and have never encountered that problem.
Have you tried to go back to stock everything, rom radio and spl to see if that makes the difference ?

reception lost in my room

Hey...so this is my story. i tried to figuere out if somebody got the same probs but couldnt find it anywhere so i am just asking all of you thanks...
SO here we go...
My Provider is E-plus and i live in Stuttgart (germany)
I got my HTC kaiser about 6 month ago and it always worked well and i didnt have any problems. I had reception everywhere (also in my room). The regular Windows mobil was installed i didnt change anything.neither the rom version nor the radio rom. so everything was how i got it in the beginning.
Then i have flashed the new version of Windows mobile 6.1 (downloaded from the HTC homepage,sorry i dont now the specific name and which radio version it was) but from that moment on my mobile phone didnt reciept in my room anymore. There was always the "!".
Then i have tried:
- to look for reciept manually (it found different providers but couldnt connect with those
- i ve tested my sim card with other phones and it worked
- i have tested different Roms and radio roms such as:
original rom
L26_KaiserDiamond_V9 (englisch)
Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 (englisch)
German clean WM6.5◄ by ChrBeck (CHome)
- different radios such as:
KAISER Radios These Radios were ripped from Kaiser WM6.1 ROMs.
1.65.14.06
1.65.20.29
1.65.16.25
1.65.17.56
1.70.19.09 -
1.71.09.01 -
lots of 1.58.XXXXX and 1.64.XXXX
and even more
--> they all work while i am not in my room. but non of them worked in my room...and it did before.
then i decided to use the original version again which i did
i ve installed Rom:
CE OS 5.2.1620(Build18125.0.4.2)
1.56.407.3
Radiorom: 1.27.12.32
What happened now is that it shows that it got full reception but the phone still doesnt work in my room. but i can use the UMTS date transmission --> i can use the Internet
as soon as i am outside and soft reset the mobile phone it works perfectly.
i am not shure if i have listed everything that is important but if somebody could help me with that i would be pretty cool because a mobile which is just working half of the time isnt very usefull...
any ideas? thanks
Seems like your phone sees the signal seded by the Mobile Operator to you but it isn't able to send a signal back to tell the operator that it is there. Seems like something causes your internal Antenna of the phone to be not as powerfull as at the beginning. Maybe you installed a Radio that has lowered the power and no Radio will rise it again cause the radio things you are in a power restricted area.
In my Charmer I was able to get the power of the radio unit 10% up but the trick doesn't seem to work for the Kaiser. Maybe an user with more Kaiser knowlege can help you better.
Anything new in your room (or nearby) that might be causing interference?
thats what i thought first too...because i ve installed wireless power point...but i have deinstalled them in my room again and it didnt work neither

htc tilt signal issue

Hi guys, I would love if anyone could help or has had this issue before, I have an htc tilt build of the kaiser, and ever since I flashed it into anything custom, tried a bunch of different radio's and hard spl's and rom versions. I even reverted everything back to the stock settings as best I could. I couldn't find the original wm 6.0 stuff it had so I flashed everything (including the hardspl back to normal and the wm 6.1 update for the kaiser. Either I may be doing something wrong... or I bricked my phone, but since its operating normally aside from the signal, I don't think I bricked it.
Heres essentially what it does, I turn it on, it works for X amount of time, usually a few mins then won't do anything, calls or data, even if it has signal, which seems to get weaker or no signal at all after a few minuites.
Now an odd thing is, if I tether the internet to my laptop with internet sharing, alot of the time the connection runs stable for several hours if I tether it within a few mins of a bootup.
I'm sorry it was so wordy, I just figured any information could help out, I'd really appreciate it, and not having to restart my phone alot the time would be great
Currently I'm running stylus black's latest full build (5.0?) on hard spl 3.29 and the radio 1.70.19.09. the stuff recommended on the thread.
Try a different Radio the recommended just means tested by chef and works doesn't mean it will work for all people since so many variables involved in choosing radio.
Hi, was your issue resolved using a different radio.. My friend has signal problem as well. It only happens when the keyboard is open.. is this a hardware realated problem?

Categories

Resources