[Q] Xperia x1 Rom backup and flash a 6.5 826x safely - XPERIA X1 Q&A, Help & Troubleshooting

Hello,
can someone please point me on backing up my current rom on my x1 and flash a new one safely.
Thx.

I'm curious also if there's a possibbility to backup the whole state of internal drive like image file on pc's and install it like a custom rom?
for installing the roms itself check thread micro sd rom install or similar

You can use the SPB Backup software ... you have to pay for it but you can use the trail version to do that ... there are many other softwares that do the same thing ... but this is the one I know ...
if you search this forum, you will find other softwares as well ... and as for installing a new rom ... you just have to follow the thread carefully and it will walk you through it ... the one I'm using is the 826X rom and it's well explained in the thread ...
any ways, flashing a winmo rom into your device is easier and safer than the Android ones ... so, it shouldn't be a big problem ... good luck

Related

Complete Backup of Kaiser

Hi, Im new to Windows mobile 6 world and i wanted to know how to make a complete rom backup of my kaiser. I wnat to start tweaking my unot, and installing and playing with the different roms posted in the forum but first i want to be sure i will be able to go back to the original version. Is posible to do this? Can I completly ruin my Kaiser by installing a bugged rom or by having problems when flashing a new rom?
thanks in advanced!!!!

How to Upgrade My SE X1 WM6.1 to WM 6.5?

I dont know if iam posting in the right area, this thread may be posted but i couldnt find it! I'm a noob user to X1 someone plz help me to with upgrading WM 6.1 to WM 6.5 so i can get "Touch-IT_BT_23541_2.1" on my phone. I have been tried to flash this rom to my phone for like 2 days now but it keep getting stuck at the loading screen (the screen after the tricolour screen)!
Thx n sorry if i posted in the wrong area and sorry about if this post already posted!
Read the stickies, and hardSPL before flash
ok thx but do i need to upggrade to wm 6.5 to flash that rom to my phone?
hardSPL will make yoou able to flash a wm6.5 ROM.
And as I said, read the stickies:
1. How To Backup Your Stock Rom
2. How To Install HARD_SPL (So that you can install custom roms)
3. How To Install A Custom Rom
4. How To Install The Stock Rom (For Warranty Reasons)
5. How To Install STOCK_SPL (Final Part For Warranty Reasons)
I did it like this:
1. Install Hard_SPL.
2. Download a different rom, unrar it and run the RUU (RomUpdateUtility).
ok, the stickies and guides at the top of each forum exist for a reason.....so queries like yours can be answered without having to create more threads. Please post your queries in the existing threads (stickies)
Thread closed

how i install windows 6.5 on my htc touch pro

plz help me i have htc touch pro ,it has 6.1windows,iwana 6.5 windows,[lz any onw help me how to install and where i get tht window,and my second problem iz i cant install softwares of (.exe) how can i install tht file type???plz help me plzzz i nedd urget help
1. Use the search button.
2. Look at the sticky's.
3. Read the rules before posting.
I agree, it seems hard to find a way how to upgrade your windows software to 6.5 or even the new 7.
I find it very difficult to get android yet everyone talks about... there is not website for it..its all hunting which is stupid. Not even torrents have them.
may be u can use 1 of so many roms here, just pick one, and enjoy your new winmo 6.5, if this is your 1st time, may you should read this one
http://forum.xda-developers.com/showthread.php?t=448008
1) Install HardSPL
2) Pick a ROM and follow the instructions
There is an excellent thread in the ROM forum giving step by step instructions. Its a bit daunting flashing the first ROM but after you have done it once or twice its easy
only problem is there are too many ROMs to choose from
... and those pesky chefs keep bringing out updates

Some question about first flash

Hi guys!
I'm a new user and i wanna flash for the first time my opal t2223 with the pajerm's rom lite 21697 but i've some question:
1. i've downloaded a stock rom for this phone, for safety, and i found the .nbh file and a radio file,but in the rar file of pajerm's rom i found just the .nbh file, i need also the radio file to flash this rom on my phone or i can flash it without?
2. during the flash process sim card and micro sd must be inserted in the phone or is better that i plugout?
3.some backup of text msg,contacts and other from wm 6.1 created with spb backup work correctly if restored in wm 6.5?
thank you for helping me and sorry for my english
And sorry if i've posted in the wrong section XD
Rom flashed thx pajerm!!!
franciccio said:
Roma flashed thx pajerm!!!
Click to expand...
Click to collapse
So, did you manage to flash it without finding Radio?
If you may, post your steps as you did it so others can make use of it. And hope you enjoy your new OS
pajerm told me that the radio is part of the software that runs from near the peripheral and the interface with the operating system, it is not necessary to update the radio when you change a rom, because each type of PPC has its own radio i guess, infact i haven't found any problem during flashing operation by following guide from the first posts
I hope I was clear enough
wbadry said:
So, did you manage to flash it without finding Radio?
If you may, post your steps as you did it so others can make use of it. And hope you enjoy your new OS
Click to expand...
Click to collapse
i havent done anything extra for the radio, flash normally as in the posts... works fine so far...

How to upgrade from 6.1 to 6.5(xperia x1)

kinda newbie here in terms of custom ROMs or flashing but could somebody give me a step by step procedure for me to be able to upgrade my xperia x1 6.1 to 6.5? just don't want to brick my phone.
i know that there are lots of tutorial here but i can't find which is the best & stable.
every one is quite stable, if you charge your phone 100% and don't plug your cable out of the phone nothing will go wrong.
After hardspl use SD-Methode to put your 6.5 rom on your phone it's the simpliest way, there you cannot damage your phone with putting a x1 rom on your x1 (with roms from other phones it could damage your phone but i am not sure)
1-unlock yr phone with spl 0.78
2-connect phone with full charge(20% is enough)
note: DON'T use task 29 if u don't flash yr device everyday!
3-try romes to find yr best choice
there is nothing in a simple regular flashing to brick the device
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Wakatsik said:
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Click to expand...
Click to collapse
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
the link for rom I proposed
Dynamics 2.2.0
manishabanzadeh said:
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
Click to expand...
Click to collapse
thanks, will try that & give you feedback
another set of questions....
these are the instructions in flashing x1 to 6.5 but don't understand most of it, sorry for the stupidity =)
-----------------------------------------------------------------------------
Installing:
0) Make a system backup!
Useful apps: SPB Backup, PPC Pim Backup, Sprite Backup
1) Install Hard-SPL 0.78 by OliNex!
2) Put needed cabs to \Storage Card\autocfg\.
Supported formats: *.cab, *.provxml, *.reg, *.rgu.
*.CAB: by default they will be installed to internal memory. Cabs with "_ui" in their names will have an opportunity to be
installed to storage card.
*.EXE: AlphaUC can install *.EXEs from \Storage Card\autocfg\exe\. If you add "_nowait" to filename, customizer won't wait
until it finishes
3) Use task29. !!! Put kovsimg.nbh to storage card !!!
Link: http://forum.xda-developers.com/showthread.php?t=649230
4) Then flash needed ROM as always (via storage card or via CustomRUU). Make a Hard-Reset.
5) Wait for the end of customization. You will see message about it on the second launch.
After that make a soft-reset.
-----------------------------------------------------------------------------
help, the link for task29 is missing, how can i continue?
for number 4, how will i do that?
android froyo 2.2 for xperia x1
hello, guys i'm kinda newbie. how do i get the android froyo 2.2 for my xperia x1. pls help. thanks

Categories

Resources