Hi, I cleaned the screen of my HTC Diamond with a bit of alcohol and a pice of tissue and it seems that the alcohol got inside of the Power button. Now, every time I try to turn the screen on by touching the power button, it turns the screen on but it dispays a message that says: "Warning: Power will be turned off and you may lose data if you have not saved them. Do you want to continue?"
If I click YES, it reboots the phone, If I click NO, then its ok. That is fine, but the problem is when I want to turn the phone off. It's impossible. It will keep trying to reboot.
Does anybody know what can I do? I am really worried.
One solution could be to make some other button from the phone to act as the power button (like the Home button that is rarely used). How can I do that?
Please help!!!!
Thank you
Hi,
I have the same problem.
Did you already find an answer ?
No, I didnt find the solution. I tried to fix the hardware but didnt succeed. So, I created a dummy file to emulate the poweroffwarning.exe that pops up when you long press the power button.
Solution
Hello, I have one AT&T TITL 8925 that upgraded to Windows Mobile 6.5
After the new software was loaded I saw same behavior on my phone.
When the phone is ON and I pressed the power button sometimes it do not respond, and others I received the warning message "power will be turned off and you may lose data if you have not saved them..." My first tought was that it is because the processor is slow to this new software release, or maybe my phone is damaged. I was working perfectly with previous (light version) release so my final guess is that this sw requires more uses of the processos.
Anyways what I have been doing is before turing it off I press the red button or hang up button, and after this if I press the power button it works fine (No more warnings). I have some theories but I will keep doing the same
Hope this partial solution helps you as it does for me.
Regards
Jerry
this is not working for me :| the problem is i can't use my power button not even to open my display when it goes to sleep :|:| i don't know what to do guys please help me
You can use the Stylus to awake the phone, instead of using the power button. You can also use TouchLockPro, to suspend the device, so you do not need the power button for that too.
Also you can set the phone to awake on pressing any key (Windows Mobile Setting), but be sure to have a good locking tool, which makes sure you do not have bogus calls and it goes to sleep again fast enough, otherwise it will drain battery.
I have the same problem.
Anyone solved this one?
I have the same issue and this is not a hardware problem. Strange since even updates/changes of the rom do not correct the issue. Did anybody find a solution for this...?
Well.. ive had this problem just ones.. I was walking downtown with my diamond in the frontpocket of my jeans (face down), after about 3min. of walk, it started to rain (big drops), and my clothes got completely wet, i turned around emidietly, to walk back to home. When i got home after 3 more min. i layed the phone on the table, and then i could hear there were somethibg wrong.. The "turn off" sound came, and the notification kept on coming up, even though i pressed No, as if i were just holding the power button down.. Then i began to press the power button continuesly for about a 100 times, and to my surprise then it stopped and have functioned perfectly for about 2 month now.. Something tells me theres some serius promlem with the smallest kind of moisture near the power button on this phone..
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
Hi! on one of my diamond, the power button off from the board. So the black little board with the button itself is not part of the complete circuit anymore... if someone know the hw testpoint for that it would great please.... i see a few TP around, but if i just start sorting them i just going to kill it...I use to flash phones with TP so is not new for me , but i find nothing for diamond.
I have a similar issue. Mine seems like it is almost stuck on, so it wakes its self up all the time, meaning a full charge lasts an hour or two. Then when it runs out of battery it tries to switch itself back on, so goes through a continuous cycle of vibrating and beeping until the battery is removed. The gf finds it very annoying at 3am lol.
Don't recall mine getting wet, but it's possible it could have got damp at some point, but it's been doing this now for about 3 weeks.
Tried a hard reset with no luck.
[ElCondor] said:
Yes this is hardware related.
If you take a look at the inside of the powerbutton, there are 2 points making contact when you press the button.
If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "Do you want to turn off your device" message.
But, if water gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
In this way you'll get that message.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
I think that could also be a reason why you constantly get that message.
Click to expand...
Click to collapse
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
2004mark said:
I can see that how to remove the power button from the video showing how to replace the screen. Any idea if once removed the button can be fixed, if not can you get replacements?
Click to expand...
Click to collapse
I think I should send it to HTC, and ask them to do it. Or go to a repair centre. But I should not try it myself, because it can be dangerous for the diamond.
Also try searching on ebay, there might be the parts you could use.
Good luck!
is there a way to remap the power button?
my diamond face same problem since this afternoon, arrrrgghhhh!!!
- blocking hwbutton1, hwbutton2, hwbutton3, hwbutton4, hwbutton5, hwbutton6, hwbutton7 >>>> NO LUCK
- hard reset >>> NO LUCK
guys, any of you solved the problem yet
youtube.com/watch?v=Q4SEQ6AUFOI
My Sony X1 have some strange problems with the power button. When it goes into sleep mode, I can not wake it up with the power button, all I can do is to soft reset. Sometimes it does not go into sleep mode either , it just "wake up" all the time. I don't know what's wrong with it, tried Hard reset but no use .
ANyone had this problems before?
@
The only way to solve this is to leave the phone near your laptop heat vent ( fan) . hot air from it might help you to get the power button up and running. But if that to doesn't work then i'm afraid thats bad.
Current sol :
1. download SU2U ( search threads )
2. go to the settings and make the " lock when stylus inserted" option ON
3. Change the screen turn off time to 5 secs..
So , to unlock , remove stylus , to lock -> insert it back ( its turns off the back light within 5 sec )
Less annoying
elektros said:
youtube.com/watch?v=Q4SEQ6AUFOI
Click to expand...
Click to collapse
thanks for this link, i accidentally tear off my power button flex. now i could turn it on again. Thanks elektros
Hello guys,
so I woke up this morning and found my phone lying on the floor still connected to the charger. When I tried to unlock the screen everything was phone, but when I tried to relock the screen it kept popping up the power menu. Also I noticed that the powerbutton had moved a bit more to the inside of the phone. Sometimes it turns off the screen but immediately after turns it on again. I can turn the phone off but it will instantly reboot.
Any solution? It's kinda a pain in the *** that I can't switch off the phone...
Thanks in advance
fix
The same thing happened to me last week i was very pissed of. Then i tryed the safetypin and itr worked. So what you do is remove the button but making the safety pin go in the small gaps of the powerbutton and then pull it out. If it is not damaged to much just put according to your need so all the functions work. Another fix is get a new power button and put it in the power button hole it should work now. If this helped please hit the thanks button
Hey, so my phone has been working fine and then all of a sudden I tried to double tap to turn the screen back on and it didn't work. So I pressed the power button and the screen turned on but I couldn't drag to unlock the screen. I tried tapping all over the screen and dragging and nothing make it unlock. I held the power button down and tried to select to power off, power off and restart, airplane mode, or cancel and none of them worked either. I took out the battery and put it back in and still nothing. The touch screen wouldn't register my inputs but would instead register random inputs throughout the screen and then stop doing that. I took the battery out and put it back in and even in TWRP it would register random inputs and then stop doing stuff altogether. I don't know what the heck to do.
sohungry said:
Hey, so my phone has been working fine and then all of a sudden I tried to double tap to turn the screen back on and it didn't work. So I pressed the power button and the screen turned on but I couldn't drag to unlock the screen. I tried tapping all over the screen and dragging and nothing make it unlock. I held the power button down and tried to select to power off, power off and restart, airplane mode, or cancel and none of them worked either. I took out the battery and put it back in and still nothing. The touch screen wouldn't register my inputs but would instead register random inputs throughout the screen and then stop doing that. I took the battery out and put it back in and even in TWRP it would register random inputs and then stop doing stuff altogether. I don't know what the heck to do.
Click to expand...
Click to collapse
Turn off your phone and inspect the screen. You may have some spot of oil that causes multiple touch inputs. Other temperature conditions that introduce condensation can have the same effect.
If not hardware, try to get to your recovery with and and make a backup first.
Hello,
I have a rooted and TWRP installed but otherwise stock 5.something T710 that I had worked on months ago. It's been great and my daughter had been using it to watch videos a couple days ago. I took the tablet from her at the end of our road trip and noticed it had about 63% battery left. I left it in the truck while we went to the movies(about 40 degrees f outsides) and then drove home without ever touching it until we got home. I went to use it when we got home and it would not turn on. I plugged it in to let it charge thinking it died for some reason, using the stock charger, though battery icon never appeared. The next morning I went to check it and it still would not turn on.
When I press the power button or plug in or unplug the charger the Recent and Back soft key lights will turn on for a second, then turn back off again.
I've tried:
Holding the power button down alone for over 3 minutes.
Held the power and volume up button for over a minute
Power and volume down for over a minute.
Home, volume down and power for over a minute
Home, volume up and power for over a minute.
I can connect it to my computer and it recognizes that my Tab S2 is connected but no files show as the default for the device was just charging mode and not the file modes.
Odin3 v3.10.7 recognizes it as connected. But fails to send the TWRP file again.
Any help?
Since the soft keys light up and the computer recognizes the device, it sounds like maybe the tab is still working but with no display? By any chance did you have adb working? I f so you could try rebooting, or booting into recovery to see if you see anything on the screen. It's possible that when you held the button combos, that it did boot into download and recovery but you couldn't see anything? In which case it could be a hardware problem. Hopefully it will fix itself! Sorry I can't be of more help..
Well adb shows the device as unauthorized. Reboot command says the same thing.
The home key is unresponsive to my finger print unlocks and no sound plays when I try to adjust the volume, like the ding sound it makes to hear if this is the volume level I want. There are never any of the capacitive touch vibrations or whatever its called to feel when you press a button on the screen.
I was wondering if it had something to do with hardware it's just strange that it would stop working from just being in my truck. From my knowledge it was never dropped or bumped heavily or anything, at least recently.
I guess it is possible something just burned up inside, that would be inconvenient, I've got to look up if its still in warranty. I love the size and performance of this thing.
Thanks for replying, hopefully more to come.
Still can't get it to work, same issues as above. I let the battery fully die which took about 2+weeks from the initial post. Which is to say that eventually the back and recent buttons stopped lighting up. I recharged it and after holding the power button for a few seconds the same condition repeated itself. If I touch the power button or home button the back and recent button back lights turn on for a moment and turn off again. There is no other indication of life. I would assume if it was just a dead screen then I should feel it try to turn on.
If I had to replace parts which ones should I look at first? Probably just the main board?
Buy a new one. Send yours in as defect. Done.
erase111
I see that is an old thread, but I having the same issue to a certain degree. The screen goes dark, but I can see the back light. If I play around enough times, (pressing the back and process button, before pressing the sensor button... Sometime, pressing the volume buttons and back button before pressing the sensor button), everything goes back to normal. Of course, it some random time, even when I am reading a web page or some other activity, it will go back to black.
So has anyone figured out what this issue actually might be? I thought maybe it was an issue with the ROM I was using, so I just moved over to LineageOS 16, but the problem still continues!