hi i was searching for a good rom, i was in darkys 9.5 and moved to darkys 10.2 ExEd
i did it throught odin..
the rom is super fast and super nice ! BUT... (((
market is not working ! when i try to download a app it saws tha it is downloading but it isnt and after 10 minutes give me a error.
Sometimes after a lot of reboot works once maybe two but then tha same again !
i didnt have this problem in 9.5.
Does anyone had this problem ? any opinion or suggestions ? i'v tied throught sgs wipe market cache, reinstall market 3.15 nothing
i would be gratuful for any help..
i hope i open the thread in the correct place this time..
anyone..
Have you checked your csc code?
The problem is propably in csc code.
Wysłano z GT-I9000 z użyciem Tapatalk
thanks for the replay ! could you give m a direction csc code ? where can i see it ?
if this tha problem how can i fix it any link or help would be great ! ty!!!
i use wifi ! browser and any other app how use internet works fine..
i can do it throught odin.. i just add csc ? and all the other tha same..
where can i get the correct file(im from greece) ??
well i used *#272*IMEI# and saw that it is KOR
does this mean korean....
how can change it ot a greek one...?
Yes it means Korean, change it to greece by looking here
the only option give me is XEU CPW XEO KOR DBT not BY(greece)
should i flash the phone again throught odin with the same tar and pid of darkys and aldo add new csc ? should i ad modem too ?
i found in this link : http://forum.xda-developers.com/showthread.php?t=846913
a csc eur. 2.3.4 if i use this is it going to work ok or am i going to burn my love one galaxy
I dont suggest odin for this, what you can do is find the csc folder from another rom, then open up the .zip you used from darky 10.2 EE, find the csc folder open it, if the other 3 letter code folders are there, paste you folder there. Then flash the rom like you did last time. Then use the *#272* code and change it. This will factory reset your phone
The csc is a 3-letter code, you need to scroll down in the link i gave you above, also you can use this which maybe clearer
thanks tallon for your suggestion but the rom im using in 10.2 resurr. and it is in pda form.
i dont mind doing a new flash with odin but i dont know if i use a csc file in odin with the pda.tar and .pit and no modem would be ok or bye bye my galaxy..
and i dont know where the H#$% could i find the right csc i think i did but i didn't
oooffoouuu..
Download csc from here
10.2 EE Its the same as 10.2 RE but CWM or darky app flashable... If your not sure where to put the csc files, or which to put lemme know
thansk man ! your life saving !
i've just flashe 2.3.4 of. throught odin,market is not working either !! ((
i'll flash once again 10.res. darkys.
i donwloaded the correct csc but where should i put it..?
have you done this before ? ttttthhhannkkkssss !!!
I have played around with the csc files before flashing the Darkyrom 10.2.2 Final which is a zip, but this was to ensure that the default was set to my csc rather then what they had already set it to.
Anyway, when you open the .zip go to system>>csc this is where all the csc files are stored, simply put your folder in here. Make sure it has a the same format as the inside of the other folders....
In addition to the above if you want it to be the default so you don't have to type in the code to change it, copy and replace the identically named files that are currently outside of the 3-letter code folders.. (contents.db, customer.xml, feature.xml, others.xml, sales_code.dat)
done with csc ! i used an install.zip in the recovery mode,change it to eur.
greek is working great in phone BUT market is not working ..!! it seems that wasn't the problem.. d%#$%$ oofoouuu... what else .. (((
After alll thatt.... argg
You checked the csc with the code.....?
Reflash everything to stock, and delete everything, im not sure anymore im tired. Ill let you know if i think of anything, but usually that or wiping the market cache works.
So again whilst your on a roll you may as well flash stock, and make sure to wipe in internal sd, cache, and dalvik cache, and factory reset.
Dont forget that wiping the dalvik will cause your phone to take approx. 10 mins to boot, maybe more..
You imei is fine right? Same as original...
Related
Hello all,
Currently i'm using a great modded rom (2.2), but i would like to flash to original 2.1 to test my battery, which is quite bad...
CSC that i have now: XEE. I900, rooted
I entered samsung-firmware, and downloaded JM9.
Inside the rar, there is 2 files
MODEM_I9000XXJM4.tar.md5 (12mb)
CODE_I9000XWJM9.tar.md5 (280mb)
They are saying the the pit for this rom should be 512.PIT. downloaded.
The problem is that on top it's written:
What can i do if i have only one file?
If you have one .tar file than is this the PDA version.
When you flash the PDA version everything will work the same like a full firmware.
Thats why many links have only one file!
Please when you have only one file SKIP RE-PARTITION!
Use only .PIT files if you have 3 files!
I don't have 3 files... THE CSC is missing, so i cannot flash if i understand right.
This is my first time flashing via ODIN.
What should i do?
By the way, there should any different in the test between JPG to JM9 ?
Thanks,
Efi
efi2222 said:
Hello all,
Currently i'm using a great modded rom (2.2), but i would like to flash to original 2.1 to test my battery, which is quite bad...
CSC that i have now: XEE. I900, rooted
I entered samsung-firmware, and downloaded JM9.
Inside the rar, there is 2 files
MODEM_I9000XXJM4.tar.md5 (12mb)
CODE_I9000XWJM9.tar.md5 (280mb)
They are saying the the pit for this rom should be 512.PIT. downloaded.
The problem is that on top it's written:
What can i do if i have only one file?
If you have one .tar file than is this the PDA version.
When you flash the PDA version everything will work the same like a full firmware.
Thats why many links have only one file!
Please when you have only one file SKIP RE-PARTITION!
Use only .PIT files if you have 3 files!
I don't have 3 files... THE CSC is missing, so i cannot flash if i understand right.
This is my first time flashing via ODIN.
What should i do?
By the way, there should any different in the test between JPG to JM9 ?
Thanks,
Efi
Click to expand...
Click to collapse
Read the many guides and instructions here and on samfirmware.com. And search. That should answer all of your questions.
Thread reported, not development.
chambo622 said:
Read the many guides and instructions here and on samfirmware.com. And search. That should answer all of your questions.
Thread reported, not development.
Click to expand...
Click to collapse
Are you kidding me? lol...
I read their guides, things over the net and nothing. I don't wanna take the risk and brick my phone. While you wrote your spam, you could help...
Anyone else please?
Try this:
[REF] Flash ANY official firmware on your phone using Kies.
http://forum.xda-developers.com/showthread.php?t=766589
[HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!]
http://forum.xda-developers.com/showthread.php?t=723596
As for the CSC file with Eclair, take your pick from this list
http://forum.xda-developers.com/showthread.php?t=802909
Also this is a development forum, not for questions or help (that is why you were reported by chambo622)
This should've been posted in "Galaxy S I9000 Q&A" forum
http://forum.xda-developers.com/forumdisplay.php?f=748
Okay, the modem is well obviously the modem and the code jm9 is the pda use these 2 plus your pit and tick repartition. The csc can be added manually by doing the following after you have flashed. Make sure you factory reset after froyo is installed.
http://forum.xda-developers.com/showthread.php?t=787163
br3tty said:
Try this:
[REF] Flash ANY official firmware on your phone using Kies.
http://forum.xda-developers.com/showthread.php?t=766589
[HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!]
http://forum.xda-developers.com/showthread.php?t=723596
As for the CSC file with Eclair, take your pick from this list
http://forum.xda-developers.com/showthread.php?t=802909
Also this is a development forum, not for questions or help (that is why you were reported by chambo622)
This should've been posted in "Galaxy S I9000 Q&A" forum
http://forum.xda-developers.com/forumdisplay.php?f=748
Click to expand...
Click to collapse
I'm sorry for my mistake. But i guess that if this thread is already open we should just finish ?
According to your link, i can just change values in my registry and kies will update my phone to JM9?
Does is mattar what CSC i'm using? no,right?
tragusman, i understood almost everything. why do i need to flash the csc? i just can't leave it like it is? which one should i choose ?
Thanks
efi2222 said:
I'm sorry for my mistake. But i guess that if this thread is already open we should just finish ?
According to your link, i can just change values in my registry and kies will update my phone to JM9?
Does is mattar what CSC i'm using? no,right?
tragusman, i understood almost everything. why do i need to flash the csc? i just can't leave it like it is? which one should i choose ?
Thanks
Click to expand...
Click to collapse
CSC is the file with carrier customizations! It is not mandatory to flash a CSC file!
But if you don't flash it you will have to enter your APN setting manually!
As OrionBG said you can just manually enter apns i just find this easier using the automatic method outlined from that post. They say that the csc file has network specific settings like gps etc not just apns.
Choose the csc that is for your region carrier they are all clearly labelled on that site its very easy to do.
tragusman said:
As OrionBG said you can just manually enter apns i just find this easier using the automatic method outlined from that post. They say that the csc file has network specific settings like gps etc not just apns.
Choose the csc that is for your region carrier they are all clearly labelled on that site its very easy to do.
Click to expand...
Click to collapse
Can i just leave CSC empty in ODIN? i must flash a csc? i cannot just leave it like it is?
I understand what CSC is... but i don't find it in the list... I'm from Israel, how can i know what csc from the list will work for me?
Whats better to test battery stats? JPG or JM9 ?
Thank you
Yes leave it blank. ive never flashed csc with odin. The method i outlined to install csc was to do after you have flashed your rom with odin.
If its not in the list just copy down your apns settings or use apn backup and restore from the market to back them upand save them to external sd or pc.
tragusman said:
Yes leave it blank. ive never flashed csc with odin. The method i outlined to install csc was to do after you have flashed your rom with odin.
If its not in the list just copy down your apns settings or use apn backup and restore from the market to back them upand save them to external sd or pc.
Click to expand...
Click to collapse
I looked into APN and i see there only things that are related to 3G/intrenet and not to general calls that go through 2G... why?
You wrote: PDA plus modem plus your pit and tick repartition...
But it's written Use only .PIT files if you have 3 files!... what should i do?
I wasn't thought it will be so hard... What do you think about the kies registry trick?
You also wrote: Make sure you factory reset after you install Froyo. The thing is that i want to install Eclair (JP9) from A modded Froyo, and then test the battery, do root again, clockwork, modded rom, lagfix. that's all...
I think that if i will factory reset it will become simlock... it's a branded phone (movistar) but i have used an unlock key...
Thank you for everything again
What pit did you use last time? if you used 512 then it would be okay not to use one but if you used 803 for froyo then id advise to use pit. As for simlock im not sure hopefully someone else can help with that.
tragusman said:
What pit did you use last time? if you used 512 then it would be okay not to use one but if you used 803 for froyo then id advise to use pit. As for simlock im not sure hopefully someone else can help with
that.
Click to expand...
Click to collapse
It's my first time flashing with ODIN like i told you
When i got the device i had 2.1, i installed root, rom manager, patched clockwork recovery and installed modded from though "install zip from sdcard'... so i didn't flashed through odin.
Ok i have some updates:
Through Kies the registry hack didn't worked because i'm trying to flash an older version, when i'm using 2.1
Opened ODIN 1.0, did all the things i need to do,
and in options:
Ticked re-partition
PDA - choosed the code
Phone - choosed Modem
CSC - left blank.
Flashed. everything went cool, JM9 is up, the thing is that he remember old apps and lancher pro, and i need to factory reset my phone through recovery. Did -worked.
my csc is XEE, it remain the same. does it mattar? My imei is displayed normally.
Baseband version: I9000XXJM4
Kernel version: 2.6.29 [email protected] #2
Build number: ECLAIR.XWJM9
?
Ok i have some updates:
Through Kies the registry hack didn't worked because i'm trying to flash an older version, when i'm using 2.1
Opened ODIN 1.0, did all the things i need to do,
and in options:
Ticked re-partition
PDA - choosed the code
Phone - choosed Modem
CSC - left blank.
Flashed. everything went cool, JM9 is up, the thing is that he remember old apps and lancher pro, and i need to factory reset my phone through recovery. Did -worked.
my csc is XEE, it remain the same. does it mattar? My imei is displayed normally.
Baseband version: I9000XXJM4
Kernel version: 2.6.29 [email protected] #2
Build number: ECLAIR.XWJM9
One last thing - how can i see the battery in percent like in modded roms?
I want to make a test tonight to sell how much my percent my phone uses over 7 hours of standby... i need to know exactly in percentages
download batt stat from the market. Good to hear all went well.
tragusman said:
download batt stat from the market. Good to hear all went well.
Click to expand...
Click to collapse
tragusman said:
download batt stat from the market. Good to hear all went well.
Click to expand...
Click to collapse
Hey,
My friend sent me what iv'e wanted
http://forum.xda-developers.com/showthread.php?t=765419
thanks. by the way there is a problem by the way, every 4-5 minutes of a voice call, the phone says sim is removed, and i have no service, tell i turn off, take off battery and plugs in...
I think it's something with csc because when i enter the recovery it's written
E:Can't mount /dev/block/still
(invlid argument)
update media. please wait...
update media,finsihed.
% MANUAL MODE%
appling multi-CSC
instaslling Multi-CSC
mps_dat value:XEE
copy_multi carrier from: XEE
multicsc: can not acces to /system/csc/XEE/system/
copy_common_data E:can't mount /dev/block/still (invaild argument)
E:can't mount /dev/block/still (invaild argument
After the test tonight i will root, install again clockwork recovery and upgrade to 2.2 so it's not that important
efi2222 said:
Hey,
My friend sent me what iv'e wanted
http://forum.xda-developers.com/showthread.php?t=765419
thanks. by the way there is a problem by the way, every 4-5 minutes of a voice call, the phone says sim is removed, and i have no service, tell i turn off, take off battery and plugs in...
I think it's something with csc because when i enter the recovery it's written
E:Can't mount /dev/block/still
(invlid argument)
update media. please wait...
update media,finsihed.
% MANUAL MODE%
appling multi-CSC
instaslling Multi-CSC
mps_dat value:XEE
copy_multi carrier from: XEE
multicsc: can not acces to /system/csc/XEE/system/
copy_common_data E:can't mount /dev/block/still (invaild argument)
E:can't mount /dev/block/still (invaild argument
After the test tonight i will root, install again clockwork recovery and upgrade to 2.2 so it's not that important
Click to expand...
Click to collapse
Someone please?
Hello all and thanks for your future help
So today i flash a friend's SGS, his phone run on SFR network (from france) with the DJP5 firmware with the combo fully fonctional.
So i flash a JM5, then the JS3 and i flash my rom kitchen from doc, custom JS3 with JPY modem and XEF CSC.
All is fine, the phone reboot, I flash speedmod Kernel k13a, reboot and set the good network and BAM.
Could not connect to 3g whatever i do.
I try different APN, then I reset to the first one (normaly the good one) but nothing.....
I try different modem (JPE, JPY and JPX) nothing work at all, i'm unable to connect 3g......
First time i see this problem, even if i flash my phone ten time a week.....
So I hope you could help me
Thanks in advance !
Nobody can help me? No idea?
I have the same kind of problem with mine. APN info is perfect. Settings are for GSM&WCDMA. I have no problem with WIFI and EDGE works fine so it'll still transfer data. It's with Darky's 9.2 ROM though so it may have something to do with the JS3 firmware customisations.
I've cleared cache and dalvik cache as well and I get the 3g symbol up for a moment but when it actually starts to transfer data, it switches to EDGE.
I'm re-flashing Darky's firmware without wipe just to see if it's an issue with my altering twframework.apk for a cool notification window background. I'll pop back on this one tomorrow and let you know how that went just to see if the first one was a bad flash. I have read that there can be more issues with flashing through CWM then through Odin but I think I'll wait and see if that's necessary.
hey i got kinda same problem..!!! :-| i have SGS i9000 in India...today i installed darky's ROM for the first time...installed 9.2 extreme version....but after that i just cant connect to a data network...not even Edge network.... if i update APN settings manually & reboot...still they are not saved...tried switching data network on & off million times also switching flight mode on & off....in hope that it will connect to my data network but just wont work..!!!
Have you all set the user names for the apn settings? I wasn't connecting either until I verified the usermame and password were correct.
Sent from my GT-I9000 using XDA App
Ok, here's the problem. It's the CSC. I know it bites but you're going to have to go through a system reset. The custom firmwares come with multi-csc (wipe versions) so enter your dial pad and type *#272*(your imei)# then select a CSC for your country or something like XEU which is what I did. Then, enter recovery, clear cache and dalvik cache. Finally, re-enter your APN.
Hope that does it for you. It worked for me as my CSC was XXOJPY (Darky's ROM) and set to KOR. I know I'll be keeping this in mind the next time I flash a new wipe ROM. Oh and do a backup beforehand, just in case.
If this helps, feel free to hit the thanks button
i always use the my region CSC.. my case the nordic one.. tried multi CSC but had various problems too..
obsessionXYZ said:
i always use the my region CSC.. my case the nordic one.. tried multi CSC but had various problems too..
Click to expand...
Click to collapse
There-in lies the problem. Generally it's a "set it and forget it" kind of thing but in the case of a rom that's going to wipe everything, you need to reset it.
Thanks for your reply! I
I've got all my apn 's settings right but I found a solution. The csc was multi and flash by the rom, so I flash and xef csc by odin and it works for me
Maybe it work for you
Thanks again for your help!
frostdream said:
Thanks for your reply! I
I've got all my apn 's settings right but I found a solution. The csc was multi and flash by the rom, so I flash and xef csc by odin and it works for me
Maybe it work for you
Thanks again for your help!
Click to expand...
Click to collapse
I have the same problem, Can you explain what you did step by step please, I'm new to this sorry.
thanks in advance.
hello,
my phone is branded to orange in the uk. i have been looking into this for the past 3 days.
i am now at the point where i am ready to flash with odin but i am unsure which firmware to flash with, and i have read so much info im getting my head all wrapped around the situation
basically my current firmware is
PDA:I9000 BVJS4
PHONE: I9000 BVJP4
CSC: I9000 ORAJS4
version 2.2.1
i have looked at http://www.samfirmware.com/WEBPROTECT-i9000.htm and the amount of firmware staggers me not one all i am requesting if someone would be so kind and reply saying "flash this one mate"
i may have already read the answer but i have spent 3 days trying to figure it out for myself.
it was locked to orange but i have since unlocked it. it is currently rooted.
im not particularly bothered about warranty because i can add it to my home insurance to cover loss or damage. and from what i have read the phone is difficult to brick fully,
i have the download mode already, its just a case of get the firmware and flash.
i apologise for the very long post and i hope someone can help me
thanks for reading.
EDIT: i already have a backup of the efs folder
in my opinion don't use odin only , only if you want stock or root . Go to Doc Rambone's kitchen and build yourself your desired rom . I suggest JS8 wipe (you will lose all your data) or nonwipe ( you will have crappy data from previous rom ) , select your own csc if you want APN Settings , hardcore/SuperCurio/DamianGTO(never tested this) Kernel at your own desire , an european modem , themes sounds and boot amination at your own desire and need , and at apps and tweaks choose what you think you will use. SORRY FOR CRAPPY ENGLISH ( I'm not a native English speaker and I wrote very quickly .
I agree you can choose a CSC to suit your network .
CPW CSC covers all UK networks .
XWJS8 v9.9.5 WIPE base rom
CPW csc
Hardcore's Kernel *RECOMMENDED* kernel
JPX modem
Apps choose what you want .
Themes and boot animation choose what you want .
http://romkitchen.org/sgs/?s=generator
http://forum.xda-developers.com/showthread.php?t=817703
jje
thamks guys, i have used odin to flash the new jvk firmware, (there is an app on market for my apn settings (im on giffgaff))
i have used criskelo's rom in the develeopment forum with his theme.
it really does amaze me when only 2 weeks ago i didnht know anything about odin or flashing and now i can downgrade/upgrade my firmware using odin, root it. and its all thanks to this wonderful website!
i even know how to install different themes etc and now i just installed a battery im just astounded.
there are a few other questions:
1) if i want to change my theme, can i just install it over the old one using cwm?
2) is there a thread/website etc where i can download certain mods? (ie i see a few of the themes have the market in different colours, different lock-screens, i just wondered if there was another place where i can get these from to install)
3) http://forum.xda-developers.com/showthread.php?t=934729&highlight=theme+creator i have found this but there doesnt seem to be a guide or anything, i cant get it to download the framework from my phone? i have tried in usb mode (kies and mass storage) download mode and mounting usb storage from the cwm. what i havent ried is with debugging mode on.
gazza1988 said:
thamks guys, i have used odin to flash the new jvk firmware, (there is an app on market for my apn settings (im on giffgaff))
i have used criskelo's rom in the develeopment forum with his theme.
it really does amaze me when only 2 weeks ago i didnht know anything about odin or flashing and now i can downgrade/upgrade my firmware using odin, root it. and its all thanks to this wonderful website!
i even know how to install different themes etc and now i just installed a battery im just astounded.
...
Click to expand...
Click to collapse
hi gazza1988, good to know u were able to debrand and flash the firmware through ODIN.
I also got my SGS through 3 UK. Its unlocked now.
But i am not am not able to install any apps and market is also not working. I also want to remove the branding.
My current config is :
PDA : I9000NEJP5
PHONE : I9000NEJP2
CSC : I9000HCGJP5
I want to flash to a stable stock firmware. Some people on forums suggested to flash JS8.
I downloaded I9000XWJS8 from samfirmwares.com but it has only one file - NEE.tar (which i guess is PDA file).
Will my current modem and CSC be compatible with I9000XWJS8 ?? Do i need to include .PIT file and select repartition ??
hi, if you want to debrand you will need new complete (ie 3 firmwares csc pda phone etc)
i assume you have odin already
if you want to debrand then download the jpu firmware (has all 3 files) here http://hotfile.com/dl/99955459/dea6962/I9000XXJPU.rar.html password for archive is samfirmware.com
once you have flashed that one go back into download mode and flash the NEE.tar as PDA to update to JS8.
gazza1988 said:
hi, if you want to debrand you will need new complete (ie 3 firmwares csc pda phone etc)
i assume you have odin already
if you want to debrand then download the jpu firmware (has all 3 files) here http://hotfile.com/dl/99955459/dea6962/I9000XXJPU.rar.html password for archive is samfirmware.com
once you have flashed that one go back into download mode and flash the NEE.tar as PDA to update to JS8.
Click to expand...
Click to collapse
Thanks for the quick reply man !!!
Do i also need to select PIT file and select re-partition ??
Also samfirmware has listed I9000XXJPU firmware download as 1 file only. Link
Like this :
I9000XXJPU ## | 512.PIT | Version 2.2.1 | 2010 December | DOWNLOAD | 1 file select NO .PIT
I've have started the download anyway, so lets see.
As i'm using my SGS in India, is it better to flash an Asian firmware with CSC which has info about indian networks ?? Can u tell me which Asian firmware on this page has all 3 files ?
possibly would be better to flash asian but what the effects of changing from one region to another are im not 100% may be worth startin a new topic in this forum as people are less inclined to look in here as they think my issue is being seen to by someone else.
the asian firmware for india is DD (ie I9000DDxxx so i would guess that the I9000DDJF2 would contain all 3 files to flash then you would have to flash I9000DDJP6 to get indian stock froyo firmware. but i would ask a more experienced person about moving regions i was a noob at this 2 weeks ago.
i am 90% certain that flashing indian firmware would debrand and enable the market, it may be worth adding a post to this thread detailing what you have now and what you would like (ie branded uk firmware to stock indian firmware - it may also be worth asking if you can use european firmware with a indian csc as i have read the indian froyo is not very good)
the reason you cant download apps from the market would be your location (ie the phone's firmware is 3 UK and you are in india so it get "confused". do you have 3g connectivity.
i have researched some of this and the CSC (country specific code) is what holds the apn settings etc so you would need an indian csc
gazza1988 said:
... do you have 3g connectivity ...
Click to expand...
Click to collapse
Yes, i have 3g, but not able to sign in to google account even with 3g. And the strange part is that i can't even directly install most of the apk files. Adobe flash player apk didn't install. Even asphalt 5 didn't install. I was able to install Winamp for android. I downloaded many apks for the internet (some of them specifically packed for SGS) but 99% of them don't install on my SGS.
I have started this thread, so lets see.
Is I9000XXJPU a Unbranded firmware ?? I think we can safely assume that if I9000XXJPU firmware is designed for factory unlocked phones sold by samsung in Europe when i could solve the market issues. And i can manually enter the APN settings of my network. The issue currently i think is the 3 UK crap.
hi guys pls help me i tried surf the net with no help
i have a Samsung galaxy s i9000 i rooted to 2.3.3 but
today i flash my phone back to singtel firmware JG4 and i plug my device to kie
it came out this error hw do i change my CSC back to singtel?
Uploaded with ImageShack.us
pls help thanks
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
diiiooon1989 said:
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
Click to expand...
Click to collapse
hi thanks for the reply but is this work for all country phone? cus mine is singapore
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
diiiooon1989 said:
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
Click to expand...
Click to collapse
hi bro i tried finding but with no luk
do u mind guide me with this
how to get xwjs3 with the boot loaders.>??
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
diiiooon1989 said:
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
Click to expand...
Click to collapse
hi bro thanks for the guide
but nw i have this issues
Uploaded with ImageShack.us
the reason i wanna flash back cus my phome home button not response-ing
): and my camera Len crack
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
JJEgan said:
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Click to expand...
Click to collapse
hi thanks for the guide but nw my phone hang at Galaxy S
GT-i9000
Samsung
logo Screen >.< and plus my Home button not working anymore
even i try up + power + home button to recovery mode
or down+ power + home button mode
also not working >.>"
myrddral said:
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
Click to expand...
Click to collapse
hi thanks for the guide but i think my phone is dead >.>
Possible fix flash stock 2.1 rom with repartition checked and pit 512 not a 2.3.3 rom
Via Odin .
jje
Sunday i send my phone to causeway point to repair my camera lens and button.. today they send my phone to my house Thumb up... i notice they change all the button, lens and the whole back case and i notice my firmware is i9000DXJPB is it the latest firmware?
hi every one
i just downloaded il orange rom 2.3.3 from sammobile i tried million times to flash it with odin , odin every time says pass but the i9000 just still booting .
i tried to remove the battery , to use pit file with the rom , to flash with defferent odin versions but it still the same , odin says pass but the phone booting all the time .
the rom is a tar file .
( every else rom "not tar file" working fine , but i need to flash the original rom )
any body can help me please ?
Download this guide. It is a direct link from the sammobile site.
How long are you waiting for the phone to start up. If you aren't waiting up to 30mins it is not long enough.
You should receive all the files required within the .zip file you downloaded from sammobile.com. If it was a single .tar file put it in PDA, if it is .pit file as well use that as well.
Does that help?
thank you , but i waited more than 30 min until the phone had become very hot then i feared to broke it .
it's a single tar file , should i use pit file with it ?
( in the guide samsung explains how to flash with non single file rom )
If the pit file came with the package then yes use it!
Can you give me a link to the rom you downloaded, and a link to the page you saw the list of firmwares for you.
What rom were you using before?
Also copy and paste what is says when you finish flashing, a screenshot would probably be better.
And lastly have you tried another computer?
F.M.K said:
3. i tried another original roms like cellcom rom its the same , but another roms like 2.3.6 and ics working just fine only the roms from sammobile do this to me .
4. i don't know how to take screen shoot of the mobile.
Click to expand...
Click to collapse
Make sure re-partition was ticked when you use the pit file.
Is there any reason you need a stock rom??
Ok it could be a bug with that FW somehow, try the links here
If the link is not there or after you try and flash the above rom and you still want to install the FW from sammobile then try after using the most similar firmwares above.
Finally if all that still doesn't work then download and install this.
Hopefully after installing that you can install the original. Or just stay with one of the other original roms above. I don't think having a carrier version of the rom is that important, but you know better than me because I assume it is important in your country.
If you do decide to stick with any of the firmware above then make sure you type in *#262*your imei# and select your correct csc code (3 letter code). Changing the selected code will reboot and factory reset your phone!
Talon26 said:
Make sure re-partition was ticked when you use the pit file.
Is there any reason you need a stock rom??
Ok it could be a bug with that FW somehow, try the links here
If the link is not there or after you try and flash the above rom and you still want to install the FW from sammobile then try after using the most similar firmwares above.
Finally if all that still doesn't work then download and install this.
Hopefully after installing that you can install the original. Or just stay with one of the other original roms above. I don't think having a carrier version of the rom is that important, but you know better than me because I assume it is important in your country.
If you do decide to stick with any of the firmware above then make sure you type in *#262*your imei# and select your correct csc code (3 letter code). Changing the selected code will reboot and factory reset your phone!
Click to expand...
Click to collapse
first of all thanks to you for helping me
second : i need afirmware with arabic , hebrew & english interface build in - only the il original one have this .
third : there is 3 providers in israel cellcom pelephone & orange , orange have a special band not like the others & this is the provider i use .
4. all the non original roms and ics's have too much problems , like radio dosn't work , low signal , market unfotunetly stoped , Restarts suddenly.
If you have a special band are you sure you have the i9000?? Is it another version of i9000 like i9000T or something. Check your box or the back of your phone after taking out the battery.
Again have you checked the firmware here it is the original firmware. It has JV9 firmware and therefore probably has your languages.. and once the correct csc is in and your APN is correct all should be fine.
This is all assuming that your phone is actually gt-i9000 not another variant.
Also the links i provide are generally quite stable and so have little or no bugs. For example this is known to be quite stable. However i am not sure about the languages..
Just found this link click by searching for the firmware name in google
And then if that doesn't work then you are not meant to have that update. Use the link for the firmware called I9000JHJV8 on sammobile, it is the earlier firmware however should fit your requirements. After setting the CSC and apn attach it to your computer with Kies and it will update to the latest.
Talon26 said:
If you have a special band are you sure you have the i9000?? Is it another version of i9000 like i9000T or something. Check your box or the back of your phone after taking out the battery.
Again have you checked the firmware here it is the original firmware. It has JV9 firmware and therefore probably has your languages.. and once the correct csc is in and your APN is correct all should be fine.
This is all assuming that your phone is actually gt-i9000 not another variant.
Also the links i provide are generally quite stable and so have little or no bugs. For example this is known to be quite stable. However i am not sure about the languages..
Just found this link click by searching for the firmware name in google
And then if that doesn't work then you are not meant to have that update. Use the link for the firmware called I9000JHJV8 on sammobile, it is the earlier firmware however should fit your requirements. After setting the CSC and apn attach it to your computer with Kies and it will update to the latest.
Click to expand...
Click to collapse
all the links you gave me is the same of sammobile firmware , the same files , only the darky that is very nice one its working fine i think but not the original one .
thank you
http://forum.xda-developers.com/showthread.php?t=1102881
Above link is a thread on xda, that has stock firmware... find one you want the same one if you can...
http://samsung-updates.com/gt-i9000-samsung-galaxy-s/
Is a link to list that has same firmware you are trying to use from sammobile.
The reason i am giving you these links is because the files that you downloaded from sammobile.com may be corrupted. These are alternative links of the SAME firmware but different files.
Finally if these do not work and you have the same outcome that the phone does not boot. Then download and install the firmware called I9000JHJV8 on sammobile.com. It is the earlier firmware however should fit your requirements. After setting the CSC and APN connect your phone to your PC. Use Samsung Kies to update your phone.
Talon26 said:
http://forum.xda-developers.com/showthread.php?t=1102881
Above link is a thread on xda, that has stock firmware... find one you want the same one if you can...
http://samsung-updates.com/gt-i9000-samsung-galaxy-s/
Is a link to list that has same firmware you are trying to use from sammobile.
The reason i am giving you these links is because the files that you downloaded from sammobile.com may be corrupted. These are alternative links of the SAME firmware but different files.
Finally if these do not work and you have the same outcome that the phone does not boot. Then download and install the firmware called I9000JHJV8 on sammobile.com. It is the earlier firmware however should fit your requirements. After setting the CSC and APN connect your phone to your PC. Use Samsung Kies to update your phone.
Click to expand...
Click to collapse
i thing you are not understanding me , the proccess of flashing the phone completes just fine and the phone start booting but it still booting ( the booting animation working fine ) it get not into the system .
i think the problem is the single tar file because all the roms with three files and icses working fine .
if there is a way to un.tar the file and made from it 3 md5 files to flash with odin maybe it will works.
F.M.K said:
i thing you are not understanding me , the proccess of flashing the phone completes just fine and the phone start booting but it still booting ( the booting animation working fine ) it get not into the system .
i think the problem is the single tar file because all the roms with three files and icses working fine .
if there is a way to un.tar the file and made from it 3 md5 files to flash with odin maybe it will works.
Click to expand...
Click to collapse
You are right I wasn't understanding...
http://forum.xda-developers.com/showthread.php?t=965190
This is a guide to repackage the tar file...
Talon26 said:
You are right I wasn't understanding...
http://forum.xda-developers.com/showthread.php?t=965190
This is a guide to repackage the tar file...
Click to expand...
Click to collapse
you are very kind person . thank you very much . thats it .
every thing works fine .