Database Develop

[Q] Install Baseband 015 in a X8a with 006?

Well. In the new roms of Racth(http://forum.xda-developers.com/showthread.php?t=914513) Is REQUIRE latest baseband version xxx15. And people with baseband 006 will never have these roms working property?
Because of that i created that topic to solve this issue.

What's the problem? Go to my thread and download X8a 015 baseband, and flash it...
Sent from my X8, so sorry for gramatical inaccuracy

blagus said:
What's the problem? Go to my thread and download X8a 015 baseband, and flash it...
Sent from my X8, so sorry for gramatical inaccuracy
Click to expand...
Click to collapse
Hunn blagus. So it's possible to install a 015 in a device with 006. That sounds good. I flahsed my device with Baseband 006 - kernel 2.0.2.A.0.24.
Now that i know the Baseband 015 work in a device with Baseband 006 i will flash it now.
Good job to all developers. You guys rock...

DJAGA said:
Now that i know the Baseband 015 work in a device with Baseband 006 i will flash it now.
Good job to all developers. You guys rock...
Click to expand...
Click to collapse
If that wasn't possible, that thread wouldn't exist
Thanks

How can I know if I have a X8a or X8i ? What are the risk of a mistake ?
Because I have already installed the new baseband provide by ratch without knowing the two versions of X8 ... That seem to work however ...

You said that you have X8a, so flash X8a baseband...
If you flash X8i baseband, 3G won't work due to frequency difference...
Sent from my X8, so sorry for gramatical inaccuracy

I have a similar problem.. I am an X8 user from Vodafone Portugal according to PC Companion i have the latest update. 2.0.1.A.0.47 and my basebande is 006. I want to use ratch custom rom but witch basedand can i install??? Don't want to brick my phone or lose GSM/3G.
Thanks

extreminator said:
I have a similar problem.. I am an X8 user from Vodafone Portugal according to PC Companion i have the latest update. 2.0.1.A.0.47 and my basebande is 006. I want to use ratch custom rom but witch basedand can i install??? Don't want to brick my phone or lose GSM/3G.
Thanks
Click to expand...
Click to collapse
If you open your phone and look under the battery it will say E15i or E15a.
Hope this helped.

alfsamsung said:
If you open your phone and look under the battery it will say E15i or E15a.
Hope this helped.
Click to expand...
Click to collapse
My doubt is can i instal baseband 15 in my actual rom? My phone is E15i.
Thks

extreminator said:
My doubt is can i instal baseband 15 in my actual rom? My phone is E15i.
Thks
Click to expand...
Click to collapse
You can use baseband 15 on your phone.I also have E15i and is using baseband 15.If you are installing custom rom use baseband 15, if nothing else is mentioned in custom rom's page.If things fail you can use seus to get back to stock SE rom.

alfsamsung said:
You can use baseband 15 on your phone.I also have E15i and is using baseband 15.If you are installing custom rom use baseband 15, if nothing else is mentioned in custom rom's page.If things fail you can use seus to get back to stock SE rom.
Click to expand...
Click to collapse
Ok i'm downloading now the 15 baseband for x8i. but i have one more question, it will install a new kernel 2.1.1.... but wil it delete my files, apps, etc?

No, it won't. Read there again and you'll see bold statement "This will NOT wipe your userdata!"

I read it but better to check 2x lol
Thanks

Hello, I have some questions.
My Kernel version is 2.6.29 / 2.0.1.A.0.47.
Can I use the flashtool to change my baseband from 006 to 015 without a problem, using blagu's baseband collection?
Thx

Yes you can.

Drakenfall said:
Yes you can.
Click to expand...
Click to collapse
Thx, I'm gonna try it later.

Only to be sure, to change my 006 to 015 I must use the 015 blagu's file, right?

Yes, use the file from blagus.

I have a 06 baseband, somehow I managed to flash miniCM 6 onto. There was a restart loop, but I managed to get around it by disabling the overclock. Can I just flash the 15 baseband onto it now?

the only requirement for basebands is to be E15a or E15i, according to your phone?

[Q] Problem flashing the kernel (ftf)

Hello!
I have tried to install MiniCM on my SE x8 (E15i)
My phone is rooted, xrecovery is installed, busybox installed, Bootloader unlocked
I run this from xrecovery -> 1 : msm7227
2 : MiniCM7-2.1.6-X8
3 : gapps-gb-20110613-signed
BUT when I try to flash the kernel ( E15_nAa-07_2.6.29.6-nAa-07.ftf )
It says flashing kernel and then flashing aborded
I havent done this before! Please tell me where iam going wrong, Because I dont know how to do it step by step!
I had come to xda because my x10 was slow after update
and it became better than before thanks to xda team and members! So it gave me the courage to try this on my x8 which I was not using because of Android os 2.1..
Help will be appreciated .. I know xda wont let me down

if boot loader already unlocked
for what your run mssm7227?
just unlock it again then flash the ftf file
but becarefull if u playing with bootloader it can brick your phone

nelikp said:
if boot loader already unlocked
for what your run mssm7227?
just unlock it again then flash the ftf file
but becarefull if u playing with bootloader it can brick your phone
Click to expand...
Click to collapse
No i Bro i mean i have unlocked the bootloader using mssm7227
I have to go back to stock SE 2.1 because the kernel is not installed the phone is stuck on the boot logo of SE
Bro I dont understand where am i going wrong?
Im sure something is getting messed up in the way, but I cant figure it out, I have been doing it all day yesterday!
When and If u have some free time, can U tell me whats the proper way to do this...
thanks @ nelikp !

OneMoreMember said:
No i Bro i mean i have unlocked the bootloader using mssm7227
I have to go back to stock SE 2.1 because the kernel is not installed the phone is stuck on the boot logo of SE
Bro I dont understand where am i going wrong?
Im sure something is getting messed up in the way, but I cant figure it out, I have been doing it all day yesterday!
When and If u have some free time, can U tell me whats the proper way to do this...
thanks @ nelikp !
Click to expand...
Click to collapse
Hey dude, when you do go back to stock rom try flashing kernel with flastool 2.9.1 first then flash rom
Hope it helped
sent from my x8 running gingerdx

wilbso said:
Hey dude, when you do go back to stock rom try flashing kernel with flastool 2.9.1 first then flash rom
Hope it helped
sent from my x8 running gingerdx
Click to expand...
Click to collapse
ok bro ill try doin this, I was using flash tool version 0.5.0.0, but i was flashing the kernel after installing the rom, maybe thats where it was going wrong
so now first
i goto stock SE 2.1
then root it
then install xrecovery
then unlock bootloader
then flash the nAa kernal?
then rom
and then gapps
am I missing something?
[email protected]

OneMoreMember said:
ok bro ill try doin this, I was using flash tool version 0.5.0.0, but i was flashing the kernel after installing the rom, maybe thats where it was going wrong
so now first
i goto stock SE 2.1
then root it
then install xrecovery
then unlock bootloader
then flash the nAa kernal?
then rom
and then gapps
am I missing something?
[email protected]
Click to expand...
Click to collapse
you've got it
click here if you want to or need to download flashtool 2.9.1 hope it helped

OneMoreMember said:
ok bro ill try doin this, I was using flash tool version 0.5.0.0, but i was flashing the kernel after installing the rom, maybe thats where it was going wrong
so now first
i goto stock SE 2.1
then root it
then install xrecovery
then unlock bootloader
then flash the nAa kernal?
then rom
and then gapps
am I missing something?
[email protected]
Click to expand...
Click to collapse
yeah that is the rite way..
gud luck

OneMoreMember said:
Hello!
I have tried to install MiniCM on my SE x8 (E15i)
My phone is rooted, xrecovery is installed, busybox installed, Bootloader unlocked
I run this from xrecovery -> 1 : msm7227
2 : MiniCM7-2.1.6-X8
3 : gapps-gb-20110613-signed
BUT when I try to flash the kernel ( E15_nAa-07_2.6.29.6-nAa-07.ftf )
It says flashing kernel and then flashing aborded
I havent done this before! Please tell me where iam going wrong, Because I dont know how to do it step by step!
I had come to xda because my x10 was slow after update
and it became better than before thanks to xda team and members! So it gave me the courage to try this on my x8 which I was not using because of Android os 2.1..
Help will be appreciated .. I know xda wont let me down
Click to expand...
Click to collapse
I don't you can unlock your bootloader by running msm7227 from xRecovery! Have you checked whether you are successful after executing msm7227 from PC? use flahstool-1 to check!

help for install rom PrimeHD v.9

hi.
i wanna install rom PrimeHD V.9
i download flashtool and PrimeHD V.9 from this site ( http://primehdhaka.blogspot.in/ )
i nevre work with flashtool.
i think must unlock my phone.
can some one help me to install this rom ?

Read these carefully...
http://forum.xda-developers.com/showthread.php?t=1254225
Few tips
Look for manufacturing date behind the phone after removing the battery.
It would be like 11wxx or 12wxx
Or look at the link in these thread..
http://forum.xda-developers.com/showthread.php?t=1755215
Try unlocking only if its below 11w29 not even at 11w29..
Hit thanx if it helps..
Sent by the walking walkman..

sidhart said:
Read these carefully...
http://forum.xda-developers.com/showthread.php?t=1254225
Few tips
Look for manufacturing date behind the phone after removing the battery.
It would be like 11wxx or 12wxx
Or look at the link in these thread..
http://forum.xda-developers.com/showthread.php?t=1755215
Try unlocking only if its below 11w29 not even at 11w29..
Hit thanx if it helps..
Sent by the walking walkman..
Click to expand...
Click to collapse
it's 11w49

pooyatavan said:
it's 11w49
Click to expand...
Click to collapse
You can not unlock you bootloader cos you will brick your x8.
This means you can not flash custom kernel. You can only Install rom on stock kernel, but PrimeHD is on Alfs and nAa.

pooyatavan said:
it's 11w49
Click to expand...
Click to collapse
Try GingerDX. One of the best ROMs for stock kernel :good:

CaH9 said:
Try GingerDX. One of the best ROMs for stock kernel :good:
Click to expand...
Click to collapse
i download GingerDX v028b
can i install with out unlock the boot loader ?

pooyatavan said:
i download GingerDX v028b
can i install with out unlock the boot loader ?
Click to expand...
Click to collapse
Yes you don't need to unlock bootloader.

pooyatavan said:
i download GingerDX v028b
can i install with out unlock the boot loader ?
Click to expand...
Click to collapse
You have to root your mobile and install busybox han you can install custom roms on stock kernel.

kurek007 said:
You have to root your mobile and install busybox han you can install custom roms on stock kernel.
Click to expand...
Click to collapse
can i root with XRecovery ?
what is the busy box ?

pooyatavan said:
can i root with XRecovery ?
what is the busy box ?
Click to expand...
Click to collapse
This should help you.
http://forum.xda-developers.com/showthread.php?t=921652

PrimeHD is fake...install GingerDX or some other rom.

[Solved]Unable to upgrade

Hey
I have a X8 with CM7 installed(2.3.5)
I am unable to upgrade it to 2.3.7..as im unable to flash the required kernel..
I really would like to have ics on my phone
Cheers

Yes, but...what's the problem? You can't unlock the bootloader? Or Flashtool throws error?

tchindalia said:
Hey
I have a X8 with CM7 installed(2.3.5)
I am unable to upgrade it to 2.3.7..as im unable to flash the required kernel..
I really would like to have ics on my phone
Cheers
Click to expand...
Click to collapse
u must unlock ur bootloader in order to get the custom kernel but 1st be sure that ur x8 unlock-able there is an issue of watt.

tchindalia said:
Hey
I have a X8 with CM7 installed(2.3.5)
I am unable to upgrade it to 2.3.7..as im unable to flash the required kernel..
I really would like to have ics on my phone
Cheers
Click to expand...
Click to collapse
What kind of cm7 do you use?
Did you unlock your bootloader?
Did you install the latest Flashtool?
Do you have the latest nAa ics kernel in /flashtool/firmwares?
If you didn't unlock your bootloader, then you have to check the manufacturing date. If it's 11w29>, you can unlock the bootloader. Once you unlocked using Flashtool you have to download latest nAa ics kernel and move the .ftf into /flashtool/firmwares. Then you have to download the latest MiniCM or ISDX or ParanoidAndroid zip with latest gapps-ics. Copy the 2 zips to the root of your SD and flash latest nAa kernel with Flashtool. Then go to recovery, full wipe, flash the ROM that you downloaded and latest gapps-ics. Reboot. Done!
Hit Thanks if I helped!
Sent from my MIUI using xda premium

yep....
if you want upgrade your phone, you must check all requirements
Unlock bootloader
http://forum.xda-developers.com/showthread.php?t=1254225
http://forum.xda-developers.com/showthread.php?t=1481630
and here the guide for flashtool
http://forum.xda-developers.com/showthread.php?p=19684970
:laugh::laugh:

Hey
Even after unlocking boot loader its not working...it gets bricked as soon as i flash the kernel..
Cheers
If my post helped, dont forget to hit the thanks button..

What kind of brick u get.. does you're phone boots up to kernel logo..
Have u flashed rom required after flashing the kernel as required..
Sent by the walking walkman..

sidhart said:
What kind of brick u get.. does you're phone boots up to kernel logo..
Have u flashed rom required after flashing the kernel as required..
Sent by the walking walkman..
Click to expand...
Click to collapse
Hey
My phone doesnot boot itself..thats the issue..I cannot see the SE logo also...

tchindalia said:
Hey
Even after unlocking boot loader its not working...it gets bricked as soon as i flash the kernel..
Cheers
If my post helped, dont forget to hit the thanks button..
Click to expand...
Click to collapse
did you read my link thread that I posted to you???
be carefull! don't ever to unlock your x8 which manufacture date is 11w29 + !
you will get a hardbrick!

BlackRabbit1703 said:
did you read my link thread that I posted to you???
be carefull! don't ever to unlock your x8 which manufacture date is 11w29 + !
you will get a hardbrick!
Click to expand...
Click to collapse
Hey
my phone has the manufacture date less than that...its some where in 10xxx.....

tchindalia said:
Hey
my phone has the manufacture date less than that...its some where in 10xxx.....
Click to expand...
Click to collapse
so you can upgrade it..:laugh:

BlackRabbit1703 said:
so you can upgrade it..:laugh:
Click to expand...
Click to collapse
Hey
Yes i can and i have tried..and succesfully unlocked the bootloaders
but i cannot flash the kernel required for 2.3.7, when i m on 2.3.5...there it gets bricked...what should i do then..??

tchindalia said:
Hey
Yes i can and i have tried..and succesfully unlocked the bootloaders
but i cannot flash the kernel required for 2.3.7, when i m on 2.3.5...there it gets bricked...what should i do then..??
Click to expand...
Click to collapse
wewwww....srange
check all your step dude!
rooted phone
unlock bootloader
Flash the latest kernel
backup
factory reset, wipe, etc (very important)
flash ROM
Done! :laugh:

I need help

How to flash zero gravity kernel on my ob in v30b
with any utility?
tuto?
thank you

Everythink is here, you have to flash kernel using recovery, so rooted phone needed...

Ok
My ob si rooted
and after .... cmw but y think is not compatible with v30
a tuto please
thank

VBill said:
Ok
My ob si rooted
and after .... cmw but y think is not compatible with v30
a tuto please
thank
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=2160394