Database Develop

[Q] battery percentage not accurate

Hi Guys!!
i've done what this link told
http://forum.xda-developers.com/showpost.php?p=10092321&postcount=11053
but everytime i reach 100% and unplug the charger, my battery percentage immediately shows 97%, be it charging with the phone off or on....
i already did wipe my battery stats in recovery a few times, the first time only it showed that the stats were wiped, after that every time i wipe the stats, it immediately goes back to the previous menu, without stating whether the wipe was carried out or not....
can someone help this noob out here.... thnx

FYI, i just installed darky's rom v8.0 with Voodoo's kernel 5.2(lagfix disabled)
when i was on stock, my 100% could last me about nearly half an hour

I have this problem too. (I am on Darky 9.02 and have seen it in Darky 8.0 too). BUT if your battery life is satisfactory then don't worry about it.

hows the performance on v9.02 bro?

mab71 said:
hows the performance on v9.02 bro?
Click to expand...
Click to collapse
Here is another post on calibration (from Darky himself)
http://darky.ficeto.com/community/index.php?threads/guide-how-to-calibrate-your-battery.321/

mab71 said:
hows the performance on v9.02 bro?
Click to expand...
Click to collapse
9.02 is good but then so was 8.00. I personally think 8.00 was faster but its only been a few days and am still experimenting. I may remove the lag fix and still need to see if my battery is draining faster.

Also look at this post: Has some interesting but unverified info about the drop from 100% to 97/98% after unplugging
http://darky.ficeto.com/community/i...-how-to-calibrate-your-battery.321/#post-3839

Do you really want it on 100%? Easy, once it says charged, leave it on the charger for another hour and when you unplugged it should stay 100 for a while
Sent from my GT-I9000 using XDA App

Problem posted hundreds of times along with solutions like search the Rom makers forum and read the posts re this problem for starters .
Simple solution save time and effort is to ignore it .
jje

thanx all for the advices.... tried the QueenAmy method, result is:
heavily used phone: battery 'died' at 2%(???)
charged phone until 100%(phone off)
switched phone on while still charging: 97% (didnt have to unplug charger)
waited...then it went from 97% straight to 100%.(funny)
then went into recovery to wipe bat stats.
rebooted and unplugged charger, battery still at 97%....
now trying to charge a bit more longer to see if can change anything... (fingers crossed)

icejagans said:
Do you really want it on 100%? Easy, once it says charged, leave it on the charger for another hour and when you unplugged it should stay 100 for a while
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
not working bro...
left it on for about an hour, unplugged, straightaway the percentage drops to 98...

It's just a change in 2.2.1.
In 2.1/2.2, they 'stretched' out the battery life a bit to mark it up to 100%, in 2.2.1 they decided to just show it at the actual value. The reason your battery won't charge to 100% is to prolong the battery life, because if the charger always charged to 100% it would have a high chance of overcharging and damaging your battery over time.
There's no real change in battery life.

I reverted back to 2.2 and still have the problem. Maybe i shouldve flashed on 100% battery... Is it possible to solve if i do another fresh flash with 100% battery?
Sent from my GT-I9000 using XDA App

nwsk said:
It's just a change in 2.2.1.
In 2.1/2.2, they 'stretched' out the battery life a bit to mark it up to 100%, in 2.2.1 they decided to just show it at the actual value. The reason your battery won't charge to 100% is to prolong the battery life, because if the charger always charged to 100% it would have a high chance of overcharging and damaging your battery over time.
There's no real change in battery life.
Click to expand...
Click to collapse
Just to clarify this, you actually cant over charge the battery on the SGS nor Li-Ion for that matter, what happens here is that the battery goes on trickle charge pre 2.2.1 and battery degrades faster if its kept at 100%, 40% is optimal for storage now with the recent changes the phone will pretend it has charged upto 100% but will stop anywhere from 99~97% yes there is no loss in battery life but dont consider 97% as the new 100%, theres already a 3% loss in this to begin with.

EarlZ said:
Just to clarify this, you actually cant over charge the battery on the SGS nor Li-Ion for that matter, what happens here is that the battery goes on trickle charge pre 2.2.1 and battery degrades faster if its kept at 100%, 40% is optimal for storage now with the recent changes the phone will pretend it has charged upto 100% but will stop anywhere from 99~97% yes there is no loss in battery life but dont consider 97% as the new 100%, theres already a 3% loss in this to begin with.
Click to expand...
Click to collapse
thanks Earl.... but is there a solution for my prob here, or do i just have to ignore it?

thanks Earl.... but is there a solution for my prob here, or do i just have to ignore it?
Is not a problem its the current design .
all the other millions of posts on the subject no way found to increase the figure .
jje

thnx mate.... i guess i'll just have to chill about this....n stop wasting my time right... ;-)

Erase battery stats to get better battery life? flash without full battery?

Is it true that the porcentage of battery u have when u flash ur phone is the one that will be used as the new 100% ? also whats the procedure i should use to erase the battery stats? my phone dies in like 4 hours , let it discharge, charge completely and then?

I don't think so, cause i always flash my MS anytime i wish even when the indicator show <20%, or when charging on UBS

I also never bothered to charge fully before flashing. Though I think resetting battery stats does help indeed.

i also read something similar to this, someone told me to charge to full, then let the phone discharge UNTIL IT TURNS OFF BY ITSELF (=battery completely dead), then charge to full again and then delete the file batterystats.bin in /data/system folder (root required).
i suppose this is what you are talking about?
i will try this in a few hours (currently discharging the last % of my battery).

andreju said:
I also never bothered to charge fully before flashing. Though I think resetting battery stats does help indeed.
Click to expand...
Click to collapse
Im confused im supposed era the stats before right after chanrging full charging the phone or i sould let it discharge m, then erase the stast and then full charge the phone?

What's your ROM?
On froyomod do you have option to calibrate battery and wipe battery status

Well, I've flashed it to FroyoRom with approx. 40% charge, played around a little, the next day when I was normally using it and my battery went down to 30% I deleted the battery stats, the system rebooted and voilla, I was at 50%
I don't know about this full charge - discharge - full charge - delete stats version. I guess I'll try it on an occasion and see what happens. At this moment I'm at 90% after being disconnected from charger for 5 hrs, though I wasn't using the phone much during this time.

...and currently finishing the same charge - after 1 day and 17 hrs currently at 20%. My Milestone never made it through the day without having to charge it through the night. Love it

The FroyoMod is really the best at the moment...

[Q]Battery indicator showing wrong?

The last couple of days I've got a weird problem. When my battery is fully charged everything seems okay and it drains in normal speed (compared to stock).
But when my phone runs out off battery and i start to charge in the beginning everything seems fine.
But suddenly it can go from 75 to 100% in 1 minute.When i look at the stats in MIUI ROM it seems like it's not at same height as it was the last day of 100%. Maybe only 80%.
Sorry for my bad English, but i hope it makes sense.
I've wiped battery stats in CWM. But is it possible that the phone actually is only 80% charged, even though the indicator shows 100% after wipe?
Because if the ROM think the battery is charged and wipe stats it will afterwards only charge to that point and the battery maximum will decrease over days?
If that's possible, how do i full charge the battery? Just leave it in the charger or?
I hope you can understand what I mean.
Thanks in advance

Hello
Does your phone charge to fx 75% and after that doesnt get higher until after you restart the phone?
Sent from my LG-P990 using XDA App

CescMusta said:
Hello
Does your phone charge to fx 75% and after that doesnt get higher until after you restart the phone?
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
Yes excactly. But the numbers differs.
Today it charged to 100% though.
Got the same problem?
Sent from my Optimus 2X using XDA App

have you try calibrate your batt again
yes my friend have this problem too, maybe there is software bug

After flashing Celebration HD 2.0.1b I first used Battery Calibration from market to wipe battery stats. Afterwards the battery indicator problems started.
Yesterday i decided to wipe battery stats manually in CWM and drain to phone to 2% before charging, and afterwards I was able to fully charge the phone.
So maybe the bug in is Battery Calibration app?
I decided to install Juice Plotter to monitor the battery and compare it to one build in in MIUI. Just to get some more data.

Hello again
Yes i had the same problem as you, with my previosly 2 lg optimus 2x, and returned them because of the problem you mentioned. I am on the third op2x and luckily this work good
So if i were in your position i would try to go to the dealer and shift the phone with another lg optimus 2x.
Best regards
Sent from my LG-P990 using XDA App

CescMusta said:
So if i were in your position i would try to go to the dealer and shift the phone with another lg optimus 2x.
Click to expand...
Click to collapse
The user said that he started to have problem after a new rom and wiping battery stats, changing phone for that is not the smartest move at all. Is like changing phone because your rom doesn't work.
I have a similar problem, after you wipe battery stats you don't have a reliable indicator, for me the phone took 3 hours to get from 99 to 100%.
I also noticed that my miui ( 1.8.5 same for 1.7.29) doesn't update battery stats when the screen is off so all those plotter don't work, and i think this messes up with the battery indicator (I guess the phone doesn't have enough data to make a decent estimate)
I think is miui + wipe battery stats that can be problematic

I know that but i am just saying that i also had the same problem with the stock rom.
Best regards
Sent from my LG-P990 using XDA App

How old is the battery? How many cycles does it have?
I know from laptop Li-Ion batteries that the voltage vs. capacity is not linear.
When discharging, the voltage will steadily drop to a "wear-level" where it will jump to an almost depleted level. When charging, this "wear-level" will be at the top.
Why I am telling this? Because if this mapping is kept in SW and you wiped it, Android needs to relearn it again. So at 1st complete charging/discharging you would see a % sudden drop/raise, but at the next cycles it would be linear with time (although the total time will be smaller than a new battery).
When laptop/phone battery tips talk about calibration, it is so whoever monitors the voltage (circuit in battery or SW) to know were the wear drop will be, so your estimates to be better.
As an example, I had a very old Thinkpad that did not have any calibration, and it would discharge to about 40% and drop to 5% within seconds. But when charging, it would raise steadily to 70% (from that 5%) but 70% to 95% in seconds. After years of use, that percentage gap would just increase (40-5 got 60-5, 70-5 on discharging).
PS: my current Thinkpad has 4 years and the battery capacity is 49% with 150 cycles. But this one has a nice feature where if the battery was above a certain percentage, plugging AC would not charge it (and thus save a few cycles). I used it set at 70%.
PS: LiIon batteries have cycle count, heat and time as main enemies. Also don't like prolonged (think storage) low charge.

battery on wallcharger screen of error
CenaDK said:
The last couple of days I've got a weird problem. When my battery is fully charged everything seems okay and it drains in normal speed (compared to stock).
But when my phone runs out off battery and i start to charge in the beginning everything seems fine.
But suddenly it can go from 75 to 100% in 1 minute.When i look at the stats in MIUI ROM it seems like it's not at same height as it was the last day of 100%. Maybe only 80%.
Sorry for my bad English, but i hope it makes sense.
I've wiped battery stats in CWM. But is it possible that the phone actually is only 80% charged, even though the indicator shows 100% after wipe?
Because if the ROM think the battery is charged and wipe stats it will afterwards only charge to that point and the battery maximum will decrease over days?
If that's possible, how do i full charge the battery? Just leave it in the charger or?
I hope you can understand what I mean.
Thanks in advance
Click to expand...
Click to collapse
I have when i turn off my fhone and i charge it it shows a battery icon whit an error in it ics lgp990 please help i dont no what tho do

[Q] battery never reaches 100% when phone is off

Hi,
I am trying to do the battery calibration piece but my phone never reaches 100% when the phone is off i charged it for almost 3-4 Hrs.
can some one help me?

New battery, like $10

i have two batteries now still i see the same issue, it started once i moved to GB Roms, before it was pretty good.

It is normal between 96% and 99%.

Is it normal to not reach 100% when i turn the phone off and charge it?

kethireddy said:
Is it normal to not reach 100% when i turn the phone off and charge it?
Click to expand...
Click to collapse
There has been talk about this occurrence before, but basically it's a battery-life saving feature of Gingerbread. Rather than hold your battery at 100%, which will decrease the battery's life, it charges to 100%, lets it dip down to a certain threshold (like 90%, for example), then recharges again.
That's my understanding, anyway.

jmtheiss said:
There has been talk about this occurrence before, but basically it's a battery-life saving feature of Gingerbread. Rather than hold your battery at 100%, which will decrease the battery's life, it charges to 100%, lets it dip down to a certain threshold (like 90%, for example), then recharges again.
That's my understanding, anyway.
Click to expand...
Click to collapse
kethireddy said:
Is it normal to not reach 100% when i turn the phone off and charge it?
Click to expand...
Click to collapse
Like jmtheiss said t's a GB surge protection not to overcharge the battery. It's a feature not a bug

does this mean we can do battery calibration on GB roms?

kethireddy said:
does this mean we can do battery calibration on GB roms?
Click to expand...
Click to collapse
Yahh, that never changed.....
Sent from my SGH-I897 using xda premium

Two things regarding Battery Calibration :
1. For Better Battery Life : Always charge upto about 90% and use. Recharge when you reach 10% or even less. This will tremendously increase the life span of Li-Ion battery.
2. As regard to 100% charging :
(i) Boot to CWM, wipe battery stats.
(ii) Reboot and charge until 100%, Disconnect from charger
(ii) Power Off and connect charger again. Charge until 100%
(iii) Boot to CWM, wipe battery stats again.
(iv) Power on the phone and charge until 100%
Done.
Repeat the same, if you wish to re-calibrate the battery after some time.
Tip: Always re-calibrate battery and charge to 100% before flashing any ROM.

ROMMaker said:
Two things regarding Battery Calibration :
1. For Better Battery Life : Always charge upto about 90% and use. Recharge when you reach 10% or even less. This will tremendously increase the life span of Li-Ion battery.
2. As regard to 100% charging :
(i) Boot to CWM, wipe battery stats.
(ii) Reboot and charge until 100%, Disconnect from charger
(ii) Power Off and connect charger again. Charge until 100%
(iii) Boot to CWM, wipe battery stats again.
(iv) Power on the phone and charge until 100%
Done.
Repeat the same, if you wish to re-calibrate the battery after some time.
Tip: Always re-calibrate battery and charge to 100% before flashing any ROM.
Click to expand...
Click to collapse
i am trying to follow these steps but my phone never reaches 100% @ the third step i have been charging it for 3 hrs..

Which ROM are you using? Because I know some ROMS have specific issue with battery charging. Please let me know

ROMMaker said:
Which ROM are you using? Because I know some ROMS have specific issue with battery charging. Please let me know
Click to expand...
Click to collapse
I was using MUI GB rom

kethireddy said:
I was using MUI GB rom
Click to expand...
Click to collapse
As I fiddled around with most of the ROMs out here in XDA, would suggest you to flash a KK4 build like Serenity or Illiminance, if you want a stable GB ROM. KK4 is the latest captivate GB leak and the ROM is awesome. Also, the ad-hoc wi-fi through modifided wpa_supplicant works in this build. The ROM is fast, stable and got good battery life. Try to flash the ROM and I'm sure you will get a great GB ROM without troubles.
Hit thanks, If I helped you out

Try charging with screen on. You'll hit100.

mrhaley30705 said:
Try charging with screen on. You'll hit100.
Click to expand...
Click to collapse
with screen on i am able to hit 100 but to calibrate arn't we supposed to get it with phone turned off.

[Q] Battery never be 100% when i plug-out it

Hello...
When i try to make full my battery (when phone is on or off) and when i see the 100% of battery, battery indicator down few unit instantly! when i disconnect the charge cable...
in otherwords my battery can be full and looks as 100%, but when i disconnect it from the power socket, indicator is donw immediality!
Have you an idea? Thanks!

I have same problem ! Any idea to solved ?
Sent from my GT-I9000 using xda premium

Try the battery calibration app from market if your phone is rooted...

It's more than likely a battery problem,check your chargers and other.

It is perfectly normal and a built in feature to stop overcharging the battery. If it is dropping to say 97-99% you have no problem.

ankaka said:
It's more than likely a battery problem,check your chargers and other.
Click to expand...
Click to collapse
battery calibration works on ICS?

do u still have ur warranty? it might be hardware internal problem?

It is possible to try to make calibration from CWM...

i also got the same problem.. anyone can help?

ColinB63 said:
It is perfectly normal and a built in feature to stop overcharging the battery. If it is dropping to say 97-99% you have no problem.
Click to expand...
Click to collapse
+1
It's a protection made by samsung,
On ICS with some kernels, we can removed this protection with NStools App's

I saw this problem even phone is not boot, so i think this is not a OS problem, maybe kernel?
However i'll try a calibration tool, i waiting for full charge... i'll back
But comments tells "this is normal and this is an protect by Samsung"... so nobody's phone is never don't look as %100 after plug-out? all of them is looks under %100 when plug-out?
Thanks for all comments..

It would seem that all phones charge to roughly 95% then stop. Sometimes the software will then display 100% instead of displaying the true charge of the battery.

After a lot of calibrations (drain & full charge, batterystats reset etc.) still battery indicator down to 98% after plug-out (even looks 100% when plug-in)... still is this normal?

Try battery calibration from market(the phone must be rooted)

shadow60 said:
+1
It's a protection made by samsung,
On ICS with some kernels, we can removed this protection with NStools App's
Click to expand...
Click to collapse
ColinB63 said:
It is perfectly normal and a built in feature to stop overcharging the battery. If it is dropping to say 97-99% you have no problem.
Click to expand...
Click to collapse
The OP should listen to these two fellas - lithium ion batteries should not be charged to 100%, nor depleted to 0% as this can effect battery longevity. The protection level is often ~ 3% away from max.

It's funny that people are happier when they see 100% on their battery, even though if it would really be correct 97% of battery capacity.
Fake 100% or real values?
Sent from my sandwiched SGS