Related
Hi anyone no how to hard reset the Galaxy S..?
knowyourcell.com/samsung/samsunggalaxys/galaxy-s-guides/498616/how_to_hard_reset_the_samsung_galaxy_s.html
Don't know it that works
tried the hardware method didn't work.
u can do factory reset by settings->privacy.
Or you can try *2767*3855#
I'm also wondering how to factory reset!! (yes I know it's in Privacy) but it keeps telling me cannot reset because clear service is not available
1 Select call.
2 Dial *2767*3855#
Archius said:
I'm also wondering how to factory reset!! (yes I know it's in Privacy) but it keeps telling me cannot reset because clear service is not available
Click to expand...
Click to collapse
did you get any solution for this?
my i9000 says the same "clear service is not available" - none of the suggested solutions works for me.
the reset option in privacy worked for me. my firmware is jf2, by the way, if that matters..
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is comming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the choosen option.
Regards Christopher
thanks man ,you made job easy.
Isn't hard resetting just removing the battery?
OGC313 said:
Isn't hard resetting just removing the battery?
Click to expand...
Click to collapse
no
hard reset, means something like FORMAT the phone, and restore the backup from Factory
If the phone has already been rooted, will the hard reset "unroot" it, so that you need to reapply the rooting procedure?
depends... to my best "guestimate" if you are on stock official ROM, chances are yes, you'll need to unroot again.
if you are using custom ROM, then it'll revert back to the clean state of the custom ROM you installed
i've not yet had the need to hard reboot, i'll find out in the near future
I just did a hard reset because I want to send my unit it for replacement.
How can I tell if the device is still rooted? I want to make sure they don't see any sign of rooting.
Edit:
The post below explains the unrooting procedure:
http://forums.hardwarezone.com.sg/showthread.php?t=2812085
But, where can I get the "odin3" for my phone which I bought from Optus Australia?
So the factory reset didn't unroot the phone?
dakine; said:
So the factory reset didn't unroot the phone?
Click to expand...
Click to collapse
Correct. It doesn't. After the wiping of data, it rebooted and presented the option of running the update.zip thingy, which I did not choose. Yet, it is still rooted. I could still see the icon called user permission. I can still install the screen capture program that requires rooting.
If you want to unroot, you probably have to use the procedure in my link above. The problem is I don't know where I can get e Odin3 file for Optus Australia.
My firmware details are as follows:
PDA I9000DTJF3
Phone: I9000DTJF3
CSC:I9000OPSJF1
When we unroot, this Odin3 thingy is to refresh which portion? All three or just one of them?
I just noticed that after hard reset, my music, video, pictures are not erased.
Isn't this strange?
^^ My internal SD card was wiped clean. Shows 13.43 GB total space and 13.43 available space
Will doing a hard reset reinstall all of the ATT features that were removed after rooting?
Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)
Easiest fix :
Go in recovery and wipe.
Then restart and see if that fixed your problem.
Alternate (Guaranteed solution) :
Go here
Click "Direct Download". If you don't see it try to refresh the page.
Fire up odin.
Extract the zip u downloaded
For pda in odin select the .tar you extracted
Put your phone in download mode.
Flash w/o repartition or nething.
That should work.
Hi! I have try the 2 solutions you mention. But always same problem... I have to mention I have installed speedmod-kernel-k12p-500hz it is correct or I have to replace it?
Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).
Sorry for this question but what do you mean by nething? (sorry english is not my first language!)
So leave everything the way it is.
Dont check mark anything extra.
YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!
Try them.
Now u know
exactly how to restore if nething ever happens
thenamelessthing said:
YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!
Click to expand...
Click to collapse
Glad to hear you got your problems sorted. Maybe you could hit the "Thanks" button under Daneshm's post.
Daneshm90 said:
So leave everything the way it is.
Dont check mark anything extra.
Click to expand...
Click to collapse
Thank you! You indirectly helped me immensely!
thenamelessthing said:
Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)
Click to expand...
Click to collapse
this problem accure bcs of
1.you didnt remove bettry b4 flashing rom
2.some stoke filmware give you error message but if you flash with 521+pda+csc+modem file then tht problem is solve
and i found that I9000XWJM5 filmware is really good if somebody need it then pm me i all send zip file
Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE
mobileoneexpress said:
Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE
Click to expand...
Click to collapse
do u have download mode??
if not buy a JIG or send back to samsung
HELPPPP
azzledazzle said:
do u have download mode??
if not buy a JIG or send back to samsung
Click to expand...
Click to collapse
hi guys, i've follow this guide but my phone it's blocked from 15 minutes... any help please?
Daneshm90 said:
Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).
Click to expand...
Click to collapse
.. ok. call me a n00b or w/e u want, but i understood everything up until that last part. when u go back to odin.
It would help if you can describe the set-up, because clearly i did something wrong... screenshots would help if possible /:
p.s. i have all the files downloaded from ur previous posts... i just need to know the order. also for the second download file, which file is the PDA file? the one with the word "CODE" in it? or i dont even apply that one .. ;;;
Hello, i've been having the same problem with my GT-i9003, and even after flashing with odin i still have the same problem. Well, it's not exactly the same, cause my phone will keep on a starting bucle if i try to start it without my EXTERNAL sd card (the one i bought), and if i start it with the external card in, it starts, but i can't use anything that uses the sd card (music, camera, 3g), so yes i can call and message and use wifi, but that's not how it's ment to be. Basically it's like i had no external or internal cards.
So everythime i try to flash without the external sd card, i get the mounting error, and if i flash with the external card, it seems ok , but i still can't use any of the things mentioned above.
I'm a bit lost, and i believe it's because i'm missing something (i'm new to this). i don't want to send it to samsung (yet)
i've been using the firmware that came with the phone, didn't try anything new.
to sum up: any attempts to flash with/without the external card are irrelevant, the problem persists.
Any thoughts/ideas/solutions?
thanks in advance.
I've got a problem with my Galaxy tab. The problems are:
1. Whenever the device is turned off all the files are deleted - like a factory reset.
2. The language always reverts back to Chinese or something like that when turned off and on - I always need to change it back to English.
2. Recorded videos show unsupported file format when attempting to playback.
3. Doesn't charge using the wall charger when it is on but when it is off it's ok.
I've tried some TS like:
1. Factory Reset / Wipe Cache and anything I could see at Recovery.
2. Reflash Gingerbread
3. Tried downgrade to 2.2 - I haven't succeeded yet since I need some files to DL.
If anyone has an idea on how to solve it or encountered the problem pls share some thought.
The main problem I'm really frustrated is regarding the memory problem whereas I can't save any files nor store anything on the 16GB internal memory.
BTW, I'm running on 2.3.3 GB
BB: P1000DXJPD
Thank You.
this is wired ... can u tell us what is your Tab old firmware ?
and did you tried to back into froyo and back again to flash the gingerbread ?
k0sh said:
this is wired ... can u tell us what is your Tab old firmware ?
and did you tried to back into froyo and back again to flash the gingerbread ?
Click to expand...
Click to collapse
I can't really say what's the old firmware since my mom just gave it to me.
I'll be trying to flash it back to froyo later though I'm still trying to figure out what Firmware I should download since the last time I tried it, the tab only goes to a constant boot loop.
I can't really figure out what's the problem with this tab. It seems like it's using deepfreeze (PC App) Since, the prior files saved are still present even after turning it off. I even tried deleting those files but to no avail after reboot it returns.
So, I'll try flashing froyo and let's see.
Thanks.
what is your tab ? GSM , CDMA ?
k0sh said:
what is your tab ? GSM , CDMA ?
Click to expand...
Click to collapse
It's GSM, I've managed to flashed 2.2 now and the charging issue seems to be solved, could charge it now using the wall charger and via usb.
But the memory problem is still the same.
Let me expand on it a little more.
The internal memory which is 12.82 GB (12.80 Avail) and Internal Device Storage (1.85 GB) seems to be detected by the TAB, the problem is whenever I save a file or anything on it after reboot it's gone but some files (Pics) even though I delete it after reboot it comes back. It seems like the memory is froze or something.
Thanks.
craphack said:
It's GSM, I've managed to flashed 2.2 now and the charging issue seems to be solved, could charge it now using the wall charger and via usb.
But the memory problem is still the same.
Let me expand on it a little more.
The internal memory which is 12.82 GB (12.80 Avail) and Internal Device Storage (1.85 GB) seems to be detected by the TAB, the problem is whenever I save a file or anything on it after reboot it's gone but some files (Pics) even though I delete it after reboot it comes back. It seems like the memory is froze or something.
Thanks.
Click to expand...
Click to collapse
Did u use pit when u flashed the rom¿
Can u reflash and use pit and after that go to recovery and wipe data and factory reset and check whether it works or no . If not this is totally a freak and wirdo thing lol
Sent From Hell To Take Your Soul
k0sh said:
Did u use pit when u flashed the rom¿
Can u reflash and use pit and after that go to recovery and wipe data and factory reset and check whether it works or no . If not this is totally a freak and wirdo thing lol
Sent From Hell To Take Your Soul
Click to expand...
Click to collapse
Yes I've used a PIT file. I've successfully flashed it now with the ROM on this thread http://forum.xda-developers.com/showthread.php?t=939360.
Still the same so it seems like this is most probably a hardware problem.
I've noticed that when I connect the Tab to my pc as a media storage, I could see the files on the internal memory. I've tried deleting it manually and quick format it. But after disconnecting it the same files returns.
I'm now trying to format it the long way, not the quick format.
I have the EXACT same problem with my Galaxy Tab 7 inch Sprint. My internal memory boots up as read only and resets itself every time I boot the device.
I've been looking for days to figure out what I can do solve this but it really doens't seem promising.
I was able to make the internal memory read writable through adb shell with:
mount -o remount, rw /
The problem is, when I reboot. All the changes are gone. If anybody has a clue please post here or PM me. Thanks!
jrhsu529 said:
I have the EXACT same problem with my Galaxy Tab 7 inch Sprint. My internal memory boots up as read only and resets itself every time I boot the device.
I've been looking for days to figure out what I can do solve this but it really doens't seem promising.
I was able to make the internal memory read writable through adb shell with:
mount -o remount, rw /
The problem is, when I reboot. All the changes are gone. If anybody has a clue please post here or PM me. Thanks!
Click to expand...
Click to collapse
i didn't even root mine and i am having the same issue with a Verizon Galaxy Tab (CDMA)
u can try by flashing different firmware..i means if now u r using jqx1..try flash another that
Sent from my GT-P1000 using xda premium
hey..i tried to flash my phone with rom manager but when my phone rebooted got stuck at "LG" logo...I used LG Update tool emergency recovery...the phone starts,i enter the pin,my sim card unlocks but it doesn't connect to the network and when the homescreen is locked it says security error and at the top it says press menu to unlock but when i press it nothing happens...what should i do???please help..sorry for my english
start the phone without sim and press 3845#*970# in dialer
if is not work, try flashing with stock firmware.
This happened to me aswell, nothing seemed to work... I returned it for service, unrooted and did the SW upgrade so nobody could find out that I had flashed Nova. The warranty should cover this if it is a manufactor problem so I made it look like it was but however I had "LauncherPro plus Menu System" installed so they blamed that and I had to pay for the service... ._. My LG hasn't arrived home yet... after soon a month, damn they are slow.
winzero said:
start the phone without sim and press 3845#*970# in dialer
if is not work, try flashing with stock firmware.
Click to expand...
Click to collapse
i have flashed my phone with the stock firmware...the menu appears with 3845#*970# what should i press there?
alex_tsi said:
i have flashed my phone with the stock firmware...the menu appears with 3845#*970# what should i press there?
Click to expand...
Click to collapse
Factory Reset, then again Factory Reset. It'll wipe all of your data on phone but maybe this will fix it.
radkor said:
Factory Reset, then again Factory Reset. It'll wipe all of your data on phone but maybe this will fix it.
Click to expand...
Click to collapse
nothing happend...i dit it ten times but the problem still remaining...
You can try this:
-Factory reset
-Emergency recovery with LG Mobile Support tool.
- Factory reset, again..
Attention: You will lost all your apps and settings.
rgabi88 said:
You can try this:
-Factory reset
-Emergency recovery with LG Mobile Support tool.
- Factory reset, again..
Attention: You will lost all your apps and settings.
Click to expand...
Click to collapse
nothing again....still security erorr....i guess i'l have to take it to lg service
came to the same situation happened to me.. help please.
kalankus said:
came to the same situation happened to me.. help please.
Click to expand...
Click to collapse
man i've tried everything....the only solution is to take it to lg service...just do an emergeny recovery and factory reset to unroot it and delete the apps...
The downsite of taking it to service, is that they upgrade it to v10e, which is extremely hard to root... I've tryed everything now and nothing worked.
I've tryed factory reset, Emergency Recovery with LG tools.Nothing... And take it LG service. Service says, "motherboard will change".So i'm waiting Service.
SOLVED !
Update you phone to the 2.3.4 using http://forum.xda-developers.com/showthread.php?t=1310093
Use Windows Enabler to check "Erase entire CP"
and voila... get network again!!!!
can you please tell me how can I check "erase entire cp" with me it is all the time inactive . I have installed windows enabler and still cant check it.
aalmo1 said:
can you please tell me how can I check "erase entire cp" with me it is all the time inactive . I have installed windows enabler and still cant check it.
Click to expand...
Click to collapse
I will tell you to use "windows enabler" but if didn't work with I have no idea.
Check if it was "on" at the taskbar.
I had exact the same problem, it occurred after i switched sim's, i was using the nova rom. I sent my phone to the service center (flashed with stock fw before ofc) and they changed the mainboard on warranty.
what to do in windows enabler?
Nothing to do, just install/open it and redo the flash guide
Sent from my blasting P970 with zeus
i don't understand :$
can you send me a link to a guide :/
(if my father knows...he'll kill me xD)
---------- Post added at 01:07 AM ---------- Previous post was at 12:22 AM ----------
the other problem is that the link above is not sending me anywhere :/
Go to Development section and find the UPK package there: http://forum.xda-developers.com/showthread.php?t=1111771
Grab Windows Enabler, open as admin (in XP not needed) and then you should be able to click all buttons
Hope u make it before any1 gets to know
Hey everyone, after a year of not caring about any mods or hacks for my galaxy s I thought that I should get one problem out of this world.
I am talking about the constantly flashing led buttons...so I stumbled upon BLN control which needed a special kernel, so I downloaded the promoted Kernel Flasher and the .tar file of the manual site of BLN (the site i was linked to via my mobilephone when opening BLN).
That tar file was called something with odin in it (not the "update" version). I used odin back in the days I remember...anyways, while in kernel flasher i inserted that tar file...and the kernel was installed, auto-reboot and since then it restarts on loops. Loads the desktop, checks for sd cards...you can scroll around a bit...then after 8 seconds it gets black and restarts.
I am really desperate here, because my exams are coming up and due to my carelessness I have this nasty problem to solve on top of that. Arghh...
There are some appz with important information in it (like notes), a clear swipe would be the absolute last resort here.
Can I recover my old kernel (didn't backup my old one), or replace/update with a new, working one? Through the recovery menue?
If you'd be so kind to step by step explain how it should be done? and I will cease any modding, hacking after this one. -_-
It is a rooted 2.3.3 Gingerbread kernel, as far as i can remember.
Can you go to download mode ? if so flash the .tar file as pda in odin. MAKE SURE IT'S THE RIGHT KERNEL FOR YOUR DEVICE.
Sent from my GT-I9000 using XDA App. i helped? hit the thanks button. Thanks
Thanks for the tip.
This morning I played around with this bootlooping phenomenon a bit and found out, that when I immediately close any wlan or phone signal my phone works normal...just that I cannot phone anyone, or be phoned, or surf the net.
I manually did a backup of all my important files now, phew.
When using backup programs my phone resets immediately too.
Ok, long story short, I got my firmware, kernel info now, so you might be able to tell me which kernel, firmware would be appropriate for me (didn't update for a year now, so I am not on top of the news).
Kernel/file that screwed up my phone:
i9000_jvh_backlightNotification_v3.0_odin.tar
My actual Kernel Version:
2.6.35.7-i9000XWJVH-CL184813 [email protected] #51
Buildnumber:
Gingerbread.XWJVB
I am able to enter the download mode, but which . tar-file should I use in your opinion? What's a good one today?
Ah, I see the light, maybe I once again will be able to phone again.
Nairozed said:
Thanks for the tip.
This morning I played around with this bootlooping phenomenon a bit and found out, that when I immediately close any wlan or phone signal my phone works normal...just that I cannot phone anyone, or be phoned, or surf the net.
I manually did a backup of all my important files now, phew.
When using backup programs my phone resets immediately too.
Ok, long story short, I got my firmware, kernel info now, so you might be able to tell me which kernel, firmware would be appropriate for me (didn't update for a year now, so I am not on top of the news).
Kernel/file that screwed up my phone:
i9000_jvh_backlightNotification_v3.0_odin.tar
My actual Kernel Version:
2.6.35.7-i9000XWJVH-CL184813 [email protected] #51
Buildnumber:
Gingerbread.XWJVB
I am able to enter the download mode, but which . tar-file should I use in your opinion? What's a good one today?
Ah, I see the light, maybe I once again will be able to phone again.
Click to expand...
Click to collapse
do you want to use a Samsung stock kernel or do you wanna give a try to Cyanogenmod stable or something like that?
Last time I saw samfirmware sites I saw that 2.3.6 was avaible for Europe...
Well... that's your choice!!!
Will I be able to keep the functionality of BLN, that keeps those led-buttons at the bottom turned off?
With a Samsung Stock-Kernel you will loose the BLN-Feature. You can try flashing another Kernel which has implemented this feature too. I used the SemaphoreKernel which has this feature. (works on all GB-Roms)
If you try Cyanogenmod you will loose BLN too. But Cm has a feature called "LED-Notification" which does the same as BLN does.
So, I downloaded update-cm-7.1.0-GalaxyS-signed.zip should I go on with this manual? http: //jjpda.blogspot.com/2011/10/how-to-install-cyanogenmod-71-on-i9000.html ?
Or do I have to go back from a root to apply this new one?
Which program do I use on PC, and which one on my phone again? :O
Search in Cyanogenmod wiki for i9000,you will find all the steps to follow..
You need 1st TO root the phone, than install ROM manager, install CWM, place CM7 zip on internal SD, remove SIM And ext. SD,reboot into recovery, wipe data, cache and dalvik, flash CM7 zip and reboot.
Don't forget:
-fully charge your phone before starting
-read CM7 wiki page
Hope this might help you.
sent from my i9000 running ICS 4.0.3
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Nairozed said:
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Click to expand...
Click to collapse
I always leave my sim card in my phone when I flash.. are you just getting no cell signal? Or just trying to get your contacts off of it?
Sent from my GT-I9000 using xda premium
Nairozed said:
Well, I did everything the wiki told me to do and here i am with a new rom.
But now my SIM-CARD isn't recognized anymore. I accidently forgot what bedo told me in his last post, and left that card inside while flashing. My bad, i guess.
But what can I do now? I re-flashed, wiped already, with no success, my sim card is still absent in cyanmod. :\
Click to expand...
Click to collapse
Can you post a screenshot about info of your phone with CM7?
(long press power button and select Screenshot when you are in the info menu )
Here some info for your amusement. Have fun!
Supposed we get to a solution, so I can use my phone for communication purposes again, I wanted to format the internal sd memory of my phone.
Can I just format it, then just leave the flash files on it, to reflash again?
How does that work?
Also, I flashed that googleappz package rom too after the cynomod flash, as I was supposed to by wiki manual.
But I cannot find google maps, android market etc.
I wonder if there is any connection to my initial sim card problem.
But first things first I guess...wanna do some calls :\
Thanks so far for all the good souls trying to help me!
try to flash cm7 radio .
What is the difference exactly? Includes a radio option?
Does it also have the option to turn off the led sensor buttons?
Has it an option to do phone calls too?
PS: I cannot seem to find any cyanmod radio file...hmm
Nairozed said:
Here some info for your amusement. Have fun!
Supposed we get to a solution, so I can use my phone for communication purposes again, I wanted to format the internal sd memory of my phone.
Can I just format it, then just leave the flash files on it, to reflash again?
How does that work?
Also, I flashed that googleappz package rom too after the cynomod flash, as I was supposed to by wiki manual.
But I cannot find google maps, android market etc.
I wonder if there is any connection to my initial sim card problem.
But first things first I guess...wanna do some calls :\
Thanks so far for all the good souls trying to help me!
Click to expand...
Click to collapse
O_O OMG!
Seems no SIM card detected....
Very very strange...
Like the fact that you flash GApps and you can't see market...
Did you wipe cache and Dalvik cache?
+ try this:
"Settings -> Location&Security -> Set up SIM card lock -> Lock SIM card (uncheck)"
I found that in some cases might help.
---------- Post added at 06:41 PM ---------- Previous post was at 06:31 PM ----------
primanka said:
try to flash cm7 radio .
Click to expand...
Click to collapse
Nairozed said:
What is the difference exactly? Includes a radio option?
Does it also have the option to turn off the led sensor buttons?
Has it an option to do phone calls too?
PS: I cannot seem to find any cyanmod radio file...hmm
Click to expand...
Click to collapse
Take a look here and try with JVK if it works...
I wiped everything possible in recovery mode, flashed that ominous JVC rom, then googleappz. At least now I can shop in the android market. But the sim card still is in the land beyond imagination.
Has my sim card been...bricked?
Which other flash files do you suggest me to try out now? Or should I get me another sim card from the store?
Everything's solved! And the solution was too easy to believe...
Checked the sim card slot more deeply and found out that the sim card wasn't placed in correctly. I seem to have taken it out through the flashing process and in all the "commotion" quickly put it in wrong. Sorry for the big fuzz, everyone.
At least now I got some training with flashing.
So, should I reflash the first cyanmod again?
no you don't need to reflash the rom, cause you already flashed twice plus wiped all possible options...!
I just didn't want to ask you to check if the SIM card was insert properly,
but that would solve your issue faster...!
Enjoy CM7!
Well, I had some time to try out the performance and stability of this mod.
Games definitely are running with a some lag (also reaction time of the sensor to control your game, makes them unplayable).
I tried to uncheck the Cyanmod setting option "Dithering" and "JIT"..also put the cpu settings to "performance".
To be sure I formatted internal SD and external SD.
My phone had some problems finding my external SD, but some guy on the net told to go to Cyanmod settings, applications, use internal memory...and now I use my external SD for everything I guess?
Maybe this is because everything is in slowmo?
Maybe the firstly flashed mod was more...stable?
So, my question would be how to use my internal sd card, maybe it gets faster then?
http: //forum.xda-developers.com/showthread.php?t=1353707
What about changing to kernel infinity?