Related
so i have had my htc hero rooted for a while now with unevoked and it has been fine well i decide that i wanted to put a custom rom on it because i could stand that my phone was so slow. so i download and installed rom manager and it went well till i rebooted after installing the zip. yes i wiped data and cache. i even took my sd card out while booting no luck. i tried different roms and yet again no luck. i hang on the boot screen even when i try to restore my nandroid what can i do to but custom roms on?
Did you flash your recovery image first?
Sent from my HERO200 using XDA App
andygu3 said:
Did you flash your recovery image first?
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
what do you mean?
when i opened rom manager and choose the rom i wanted to install it asked if i wanted to wipe and backup or something but i know i check both. then i install the zip in the recovery boot menu and rebooted and no luck. then i tried another rom and wiped before installing and still no luck.
At the very top of rom manager, you must flash 2.5.0.1 recovery. Did you do this first?
Sent from my HERO200 using XDA App
andygu3 said:
At the very top of rom manager, you must flash 2.5.0.1 recovery. Did you do this first?
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
so im just going to run the ruu and reinstall the phone back to factory setting. then im going to root it then when i open rom manager tell me what to do exactly so i don't hang again at the htc boot screen.
cbwhat said:
so im just going to run the ruu and reinstall the phone back to factory setting. then im going to root it then when i open rom manager tell me what to do exactly so i don't hang again at the htc boot screen.
Click to expand...
Click to collapse
Sounds good, let us know.
andygu3 said:
Sounds good, let us know.
Click to expand...
Click to collapse
still get hang on the boot screen even when i try to restore my nandroid
cbwhat said:
still get hang on the boot screen even when i try to restore my nandroid
Click to expand...
Click to collapse
So you flashed the clockworkmod recovery, booted into recovery and made a nandroid of your stock rom. Then, what rom were trying to flash?
andygu3 said:
So you flashed the clockworkmod recovery, booted into recovery and made a nandroid of your stock rom. Then, what rom were trying to flash?
Click to expand...
Click to collapse
This exact same thing happened to me. What I did to fix it was pull the battery, then wipe everything (dalvik, data, cache), and then rebooted. My phone was able to boot then.
I'm having the same problem with rom manager. I just rooted my desire using the unrevoked method, then ran rom manager. I did install the recovery mode first, then backed up the rom. How my desire is just rebooting to the htc screen. How do I get out of this?
Many thanks,
Joe
dumb question, but how did you wipe everything?
Joe
Joefried said:
I'm having the same problem with rom manager. I just rooted my desire using the unrevoked method, then ran rom manager. I did install the recovery mode first, then backed up the rom. How my desire is just rebooting to the htc screen. How do I get out of this?
Many thanks,
Joe
Click to expand...
Click to collapse
Hey, that's exactly the same issuing I'm experiencing now. Did you solve it? And if yes, how?
Well, a few hours later I solved it by restoring a backup and then booting went well. Also described in a thread on androidforums dot com (I can't enter the link here due to not having posted enough messages) .
cbwhat said:
so i have had my htc hero rooted for a while now with unevoked and it has been fine well i decide that i wanted to put a custom rom on it because i could stand that my phone was so slow. so i download and installed rom manager and it went well till i rebooted after installing the zip. yes i wiped data and cache. i even took my sd card out while booting no luck. i tried different roms and yet again no luck. i hang on the boot screen even when i try to restore my nandroid what can i do to but custom roms on?
Click to expand...
Click to collapse
I don't know if this helps, but I'm pretty sure nandroids are specific to which recovery they were created with, I read that somewhere a few days ago. If you did not have clockwork before, I would try getting the recovery you used to make the nand, install that recovery and then restore the nand. Then try the whole wipe everything and get clockwork and go to town. If you haven't tried RA/Darch 1.7 recovery, I would recommend it, I personally like it better than clockwork, it seems faster, and simpler to use.
Exactly What "Il Duce" Said Will Fix Your Problem, Same Exact Thing Happened To Me, What I Did Was Go Back To Previous Version Of Rom Manager Then Flash Alternate Recovery, AND Regular Clockwork Recovery, Should Be Good After That!
Sent from my HERO200 using XDA App
Ok so I have successfully rooted my phone after updating to Gingerbread. However, I had a few issues and had to read through a bunch of different posts to get there. So I'm bored and decided to consolidate everything into one.
If anyone has any other issues or fixes post them here and I will update the OP.
Credit goes to mtmichaelson and all those who helped get this working
http://androidinvasion.us/forum/index.php/topic,77.0.html
Here it is:
1. ROOT PROCESS
A. Get back to Stock:
-download the stock Zv4 ROM zip from here and put it on your external SD card- http://forum.xda-developers.com/showthread.php?t=1326893
-Back up all your apps in titanium (important: USER apps only, no data or system apps)
NOTE: It has been reported that restoring apps and data in titanium may cause some issues coming from Froyo to Gingerbread. I backed up my user apps only for easy re-install and NO data or system apps. It worked without a problem.
-MAKE SURE YOU HAVE 4G ENABLED
-boot into recovery (CWM)
-backup?
-factory reset
-select "install ZIP from SD card" in CWM, and install the stock ZIP from the link
-re-bootyour phone (you will have to re-activate it as well)
-install revo toolkit from here if it was wiped with the system reset - http://forum.xda-developers.com/showthread.php?t=1144951
-press "install recovery" and then !!!Revo Stock!!! to go back to stock recovery and wait for it to complete
B. Update to Zv6 then Zv7 (Gingerbread)
-manually search for the update and install it (this will install the v6 update)
-once that installs, manually search again to install the gingerbread update
NOTE: Some people still can't get gingerbread. Verizon has not finished rolling the update out to everyone yet.
Now here is where it gets a little dicey...
C. Rooting Your Gingerbread Phone
-pick up the rooting package from mtmichaelson here - http://forum.xda-developers.com/showthread.php?t=1326509
-follow the instructions he has on that page to obtain root
-Two issues arose for me from this point on.
2. ISSUES
A. Drivers Issue
-The first issue was that some people, including myself, couldn't download the esteem drivers.
-Some people were able to get the drivers from this page to work - http://androidnerds.net/2011/10/08/lg-esteem-oneclickroot-now-ready/.
-I was not able to get my computer to recognize my phone using the above drivers either. I would run the root command from the downloaded package and it would get stuck at "running daemon something something".
-What I did was manually uninstall the LG drivers from my computer and deleted everything "LG related"
-Then I got the drivers from the LG website at this link - http://www.lgforum.com/resources
-Scroll down to the Verizon section and download the "LG_VZW_UNITED..." drivers.
-Your phone should be recognized using the drivers from one of these links.
B. Superuser/Root access Issue - NOTE: this should be fixed now with mtmichaelson's newest root method found here - http://forum.xda-developers.com/showthread.php?t=1326509
-The second issue that came up was that the previous superuser app I had installed stayed on my phone after the updates, even though I lost root.
-The root command from the LG Esteem page would think I had root, but I actually didn't get root access.
-Apparently this issue came up on the Esteem previously and someone wrote a fix for it here - http://androidforums.com/esteem-all...-w-superuser-3-0-6-binary-3-0-3-download.html. It will uninstall the old superuser and install the new version.
3. INSTALL CWM RECOVERY
-mtmichaelson's new rooting package should automatically install CWM recovery on your phone now.
Old method:
-To get CWM back on your phone it's the same process as before the update. Get the Revo Toolkit from thecubed here and follow the instructions - http://forum.xda-developers.com/showthread.php?t=1144951
-There is sometimes an issue where the recovery does not install correctly and gives a fatal error. If this happened, make sure you have version 1.17.1 of busybox installed at system/bin. This worked for me and I got it installed correctly.
...And you should have root after trying a combination of the above. Hope this helped.
-If you have READ through this and still have any issues you can get more personalized help on the IRC channel here.
-Again I did not help with any of this, I'm just consolidating info. If you want to thank someone, thank mtmichaelson and everyone else who helped figure all this out.
-I will keep updating this as new issues arise.
Thank you for compiling this information, it is a useful reference for people to have. I know that the drivers issue took me quite a while to work out even though it is pretty simple. Hopefully this helps others to get rooted with much less trouble.
Quick question using that stock ROM will it completely unroot me?
Also a bit confused with me running revolt does that mess up me just flashing that and it has the stock boot image.
I've Revolted have you?? Sent via tapatalk plugin.
i'm having issues with CWM... i flashed back to my stock+root backup and every time the OTA update tries to install it boots to clockwork. ran the exitrecovery.zip in clockwork and it still boots to clockwork. i cleared the cache/dalvik again, the OTA is downloading gonna try it again...
xjli said:
i'm having issues with CWM... i flashed back to my stock+root backup and every time the OTA update tries to install it boots to clockwork. ran the exitrecovery.zip in clockwork and it still boots to clockwork. i cleared the cache/dalvik again, the OTA is downloading gonna try it again...
Click to expand...
Click to collapse
Hey guys, I have a new package for root for those having problems. I need testers though. If you can come on irc in about 20 minutes. It has the drivers in it also.
Sent from my VS910 4G using xda premium
xjli said:
i'm having issues with CWM... i flashed back to my stock+root backup and every time the OTA update tries to install it boots to clockwork. ran the exitrecovery.zip in clockwork and it still boots to clockwork. i cleared the cache/dalvik again, the OTA is downloading gonna try it again...
Click to expand...
Click to collapse
You need to use Revo toolkit to get cwm off and the stock recovery back on. from there it will run fine. Then you just have to reroot using MT's modified rooting .bat file
Haro912 said:
You need to use Revo toolkit to get cwm off and the stock recovery back on. from there it will run fine. Then you just have to reroot using MT's modified rooting .bat file
Click to expand...
Click to collapse
How? I'm pretty good at this stuff but i feel like a moron bc i can't figure this out.
xjli said:
How? I'm pretty good at this stuff but i feel like a moron bc i can't figure this out.
Click to expand...
Click to collapse
Got it. I guess the first release of revo toolkit didn't have the flash stock recovery option. Can't wait to finally have gb on this thing..
Still reboots to cwm... it won't flash stock recovery. Any ideas?
xjli said:
Still reboots to cwm... it won't flash stock recovery. Any ideas?
Click to expand...
Click to collapse
Go into revotoolkit, Click install clockwork recovery, it should pop up to choose !!revo_stock!! or 4.0.0.2. Choose the revo stock. After it runs, click to check which recovery is installed and make sure it says revo stock, then reboot.
Sent from my VS910 4G using xda premium
mtmichaelson said:
Go into revotoolkit, Click install clockwork recovery, it should pop up to choose !!revo_stock!! or 4.0.0.2. Choose the revo stock. After it runs, click to check which recovery is installed and make sure it says revo stock, then reboot.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
It doesn't..still says 4.0.0.2... how long should it take to 'install?'
OP updated for the new packages from mtmichaelson
xjli said:
It doesn't..still says 4.0.0.2... how long should it take to 'install?'
Click to expand...
Click to collapse
It depends on you connection speed. If it's 3g a while. I recommend doing it on 4g or wireless. You also need busybox installed in the right location. Install the version 1.17.1 in system/bin. The newer versions of busybox may work now but they previously did not.
jrf28 said:
It depends on you connection speed. If it's 3g a while. I recommend doing it on 4g or wireless. You also need busybox installed in the right location. Install the version 1.17.1 in system/bin. The newer versions of busybox may work now but they previously did not.
Click to expand...
Click to collapse
Righto. Only slow 3g in my silo of an office :-/ ill let it go for a while.
Just reinstalled busybox... got it!
The only issue I'm having is getting CMW to stick. I install it, reboot into recovery, and it's there. Reboot, open RevoToolKit, check version, and it says none installed. Hmmm. Trying to install again and see...
borborpa said:
The only issue I'm having is getting CMW to stick. I install it, reboot into recovery, and it's there. Reboot, open RevoToolKit, check version, and it says none installed. Hmmm. Trying to install again and see...
Click to expand...
Click to collapse
It looks like it's a common problem. I haven't installed the ROM yet but mt's new gingervolt rom is supposed to make CWM stick - http://forum.xda-developers.com/showthread.php?t=1326542
Ok so I'm a complete and utter noob when it comes to CWM etc. Never had an android device before this one, never flashed a ROM.
I've got a pretty good grasp of whats going to be happening here, but I'm a little skiddish.
I'm on stock GB with root, at the point where i'm supposed to install CWM with the RevoToolkit. In the RevoToolkit instructions, thecubed says "If no version is listed, STOP and post here.". Well, no version is listed, presumable because i'm on a GB stock recovery. Do I stop here, or do I proceed with installing clockwork recovery?
Specifically, RevoToolkit reports "Version Not Found".
Advice?
i_t_n said:
Ok so I'm a complete and utter noob when it comes to CWM etc. Never had an android device before this one, never flashed a ROM.
I've got a pretty good grasp of whats going to be happening here, but I'm a little skiddish.
I'm on stock GB with root, at the point where i'm supposed to install CWM with the RevoToolkit. In the RevoToolkit instructions, thecubed says "If no version is listed, STOP and post here.". Well, no version is listed, presumable because i'm on a GB stock recovery. Do I stop here, or do I proceed with installing clockwork recovery?
Specifically, RevoToolkit reports "Version Not Found".
Advice?
Click to expand...
Click to collapse
I had the same thing I got all pissed and thought I was screwed then someone mentioned the GB thing. You'll be fine if you flash cwm. Just flash cwm, boot into it, make a backup in cwm, flash gingervolt, and reboot. everything will work fine
Haro912 said:
I had the same thing I got all pissed and thought I was screwed then someone mentioned the GB thing. You'll be fine if you flash cwm. Just flash cwm, boot into it, make a backup in cwm, flash gingervolt, and reboot. everything will work fine
Click to expand...
Click to collapse
Awesome, thank you for the quick reply. Another stupid question that i'm sure is answered somewhere on here, but what exactly will I lose when flashing a ROM, and what will I be able to restore back with a backup?
So my apologies if this has been covered, have seen similar things but not quite the same . . .
been running decrapped. (was on revolt 1.0 or 1.1 a while back, but went back to decrapped.)
so . . . restored my original v4 backup from june, system and boot. wiped data.
and now it won't update! when i go to settings --> about phone --> update --> check for new, it downloads, but when the phone reboots itself, it says update failed, and i'm still on v4. tried it a few times.
also, lost clockwork . . . tried to reboot into clockwork, and when i said "yes, wipe data and return to factory settings", it didn't go into clockwork, but actually wiped data and returned to factory settings.
what am i doing wrong??!!
thanks!
Sounds like you need to download the revo stock you need to make sure everything is back to normal for some reason even if the boot.img. is different it won't update
Sent from my VS910 4G using xda premium
newkick said:
So my apologies if this has been covered, have seen similar things but not quite the same . . .
been running decrapped. (was on revolt 1.0 or 1.1 a while back, but went back to decrapped.)
so . . . restored my original v4 backup from june, system and boot. wiped data.
and now it won't update! when i go to settings --> about phone --> update --> check for new, it downloads, but when the phone reboots itself, it says update failed, and i'm still on v4. tried it a few times.
also, lost clockwork . . . tried to reboot into clockwork, and when i said "yes, wipe data and return to factory settings", it didn't go into clockwork, but actually wiped data and returned to factory settings.
what am i doing wrong??!!
thanks!
Click to expand...
Click to collapse
Reboot, reinstall clockwork, flash the revo stock zip I posted this morning in clockwork, reboot, remove clockwork and install stock, update.
Sent from my VS910 4G using xda premium
Edit: Disregard me. mtm beat me and definitely knows
Sent using Tapatalk
newkick said:
So my apologies if this has been covered, have seen similar things but not quite the same . . .
been running decrapped. (was on revolt 1.0 or 1.1 a while back, but went back to decrapped.)
so . . . restored my original v4 backup from june, system and boot. wiped data.
and now it won't update! when i go to settings --> about phone --> update --> check for new, it downloads, but when the phone reboots itself, it says update failed, and i'm still on v4. tried it a few times.
also, lost clockwork . . . tried to reboot into clockwork, and when i said "yes, wipe data and return to factory settings", it didn't go into clockwork, but actually wiped data and returned to factory settings.
what am i doing wrong??!!
thanks!
Click to expand...
Click to collapse
Or you could follow these instructions. I did this going from Revolt Rom 1.5 to V4 stock then upgraded to V6 then V7.
http://forum.xda-developers.com/showthread.php?t=1211295
mtmichaelson said:
Reboot, reinstall clockwork, flash the revo stock zip I posted this morning in clockwork, reboot, remove clockwork and install stock, update.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
First off, thanks for all the work you have been doing!
I have used LGNPST to first goto V6 with no luck, so I then used LGNPST to get to V4. I was unable to get the update with either one of these installed.
I then rooted and used your CWM zip posted earlier today, rebooted and used your RevoToolKit to reinstall the stock boot image. I even went so far to uninstall RevoToolKit after putting the stock image back on the phone thinking LG could tell I had it??
No matter what I do, when I choose "Software Update" "Check for New Updates" it still says nothing is available...
...Maybe I should get the original Moto Razr flip phone back out of my closet...
You want to make sure you uninstall CWM and revert back to the stock boot before you run the update from Verizon.
borborpa said:
You want to make sure you uninstall CWM and revert back to the stock boot before you run the update from Verizon.
Click to expand...
Click to collapse
Is using RevoToolKit and installing the "!!!REVO STOCK!!!" the same as your reference of the "stock boot?"
Maybe I am making the assumption than the RevoToolKit's, "Revo Stock" image is correct, when in fact I should just leave the stock image that comes with LGNPST???
westnewton said:
First off, thanks for all the work you have been doing!
I have used LGNPST to first goto V6 with no luck, so I then used LGNPST to get to V4. I was unable to get the update with either one of these installed.
I then rooted and used your CWM zip posted earlier today, rebooted and used your RevoToolKit to reinstall the stock boot image. I even went so far to uninstall RevoToolKit after putting the stock image back on the phone thinking LG could tell I had it??
No matter what I do, when I choose "Software Update" "Check for New Updates" it still says nothing is available...
...Maybe I should get the original Moto Razr flip phone back out of my closet...
Click to expand...
Click to collapse
I am having the exact issues.
The only thing I know is I fastbooted this phone on my first attempt to root.
and used abd to push the nanroid backup in.
patsoxfan said:
I am having the exact issues.
The only thing I know is I fastbooted this phone on my first attempt to root.
and used abd to push the nanroid backup in.
Click to expand...
Click to collapse
I did NOT use adb, and used CWM to restore the nandroid backup. SO either option apparently yields same results.
Maybe this issue stems back to the first day and first root of the phone and doing something different. I would assume using LGNPST would get the phone to its truly stock form though... ?
westnewton said:
I did NOT use adb, and used CWM to restore the nandroid backup. SO either option apparently yields same results.
Maybe this issue stems back to the first day and first root of the phone and doing something different. I would assume using LGNPST would get the phone to its truly stock form though... ?
Click to expand...
Click to collapse
I have been from v4-v6 using LGNPST with no new results
westnewton said:
Is using RevoToolKit and installing the "!!!REVO STOCK!!!" the same as your reference of the "stock boot?"
Maybe I am making the assumption than the RevoToolKit's, "Revo Stock" image is correct, when in fact I should just leave the stock image that comes with LGNPST???
Click to expand...
Click to collapse
Yes that would be the stock, thus removing CWM. Hmm...
Sent from my VS910 4G using xda premium
Same. I'm trying to get the gingerbread tot and it would save us all
Sent from my VS910 4G using Tapatalk
See this: http://forum.xda-developers.com/showthread.php?t=1327012
Looks like it is a 2 week push from Verizon... Although 2 weeks was not the answer I was looking, it is good to know I am not completely crazy. (Although some may disagree )
mtmichaelson said:
Reboot, reinstall clockwork, flash the revo stock zip I posted this morning in clockwork, reboot, remove clockwork and install stock, update.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Worked for me, thanks mt!
Was a bit confused as to how to remove clockwork and why it disappeared on me earlier, but I think the answers to those questions are one and the same. (I'm not used to revotoolkit, rooted and installed cwm before revotoolkit existed and hence never installed it until today . . . )
I skipped flashing your revo stock zip, assuming my original back up would be good enough, but apparently I was wrong.
Looking forward to gingervolt!!
newkick said:
Worked for me, thanks mt!
Was a bit confused as to how to remove clockwork and why it disappeared on me earlier, but I think the answers to those questions are one and the same. (I'm not used to revotoolkit, rooted and installed cwm before revotoolkit existed and hence never installed it until today . . . )
I skipped flashing your revo stock zip, assuming my original back up would be good enough, but apparently I was wrong.
Looking forward to gingervolt!!
Click to expand...
Click to collapse
mtmichaelson said:
Reboot, reinstall clockwork, flash the revo stock zip I posted this morning in clockwork, reboot, remove clockwork and install stock, update.
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Now even more confused though.
How do you install stock after removing cwm?
patsoxfan said:
Now even more confused though.
How do you install stock after removing cwm?
Click to expand...
Click to collapse
When you use the RevoToolKit to flash the stock boot image, you are replacing (removing) the CWM recovery. It is all one step essentially.
The instructions to 'remove CWM and reinstall stock' are actually 1 step.
westnewton said:
When you use the RevoToolKit to flash the stock boot image, you are replacing (removing) the CWM recovery. It is all one step essentially.
The instructions to 'remove CWM and reinstall stock' are actually 1 step.
Click to expand...
Click to collapse
that's what i did but it looks like Verizon has chosen to frustrate a few customers.
Funny thing is I cant update to v6 by ota.
patsoxfan said:
that's what i did but it looks like Verizon has chosen to frustrate a few customers.
Funny thing is I cant update to v6 by ota.
Click to expand...
Click to collapse
I believe Verizon can push V6 OTA, but NOT V7
westnewton said:
When you use the RevoToolKit to flash the stock boot image, you are replacing (removing) the CWM recovery. It is all one step essentially.
The instructions to 'remove CWM and reinstall stock' are actually 1 step.
Click to expand...
Click to collapse
right. that's where i got confused, never having used revotoolkit!
you hit "install clockwork recovery" at the bottom right, choose !!RevoStock!!, and reboot. this will both install the stock recovery and delete cwm.
I couldn't update to v6, either. but following mt's instructions worked. it's essentially what i had tried previously, though i had restored my own backup of v4 rather than flash the zip mt posted earlier; flashing the zip made the difference.
Let me try to explain my situation...
I was on 5.5.893 with root and Bootstrap recovery installed. Rom manager was also installed later and used that to flasha newer CW recovery. Everything was working. I could make backups of my rom when needed (stock ROM).
Then the .902 OTA came out and I could not flash it. At some point I had modified the framework_res.apk so no OTA would flash.
So.. I used RSDLite to flash everything back to stock 5.5.893. Then rooted. Then installed bootstrap (the free one.. not from the market, but from koush's site). The pressed reboot recovery. I was stuck at the Motorola logo... bootlooping! yay..
So.. since I didnt want to mess with troubleshooting it too much, I used RSDLite again to install 5.5.893. Then rooted/forever root again. Then flashed the official OTA that I saved off my phone through stock recovery.
I'm now on the official .902 with root.Back on the upgrade path!
My question is... what do I need to do to get CW recovery back on this thing? I really don't want to have to FXZ this thing again. Also.. when I use RSDLite to flash the phone, does that completely remove any trace of bootstrap or any custom recovery? Or is that part of the phone left alone during a flash? Does that even make sense?
Ultimately, I want to get safestrap installed so I can try out the ICS roms out there since they have everything working now!
Nobody? I know I went into some detail that I probably didnt have to, but I thought the question was simple enough.
Download safe strap apk it is in my guide the link since your rooted already open app select install or whatever once your done reboot etc... its all in my guide just do everything past the motofail root method....
Sent from my XT875 using XDA App
Here's my link http://forum.xda-developers.com/showthread.php?t=1497094
Sent from my XT875 using XDA App
A friend of mine suggested that I try Cyanogenmod, so I decided to flash my Galaxy Mini. The first problem was the bootloop, and no matter how many times I wiped the phone, it was always stuck at the Android text. So I decided to try the Honeycomb mod. Same happened. So I decided to flash it with Android 2.3.6 from sammobile.com. At last, it started working. However, Google Play still sees every application as "installed" (but of course they aren't), and when I try to delete from GP, nothing happens. After trying to install other applications, I realized that I cannot install anything from the market. Any idea how I could solve this problem? I would be very grateful.
did you flash your costom rom trough clockworld mod recovery (CMW)???
lackhoo said:
did you flash your costom rom trough clockworld mod recovery (CMW)???
Click to expand...
Click to collapse
He can't flash it by an another way
Sent from my GT-I9400 using XDA Premium
lackhoo said:
did you flash your costom rom trough clockworld mod recovery (CMW)???
Click to expand...
Click to collapse
Yes I did. I used CWM 5.0.2.6. The funny part is that after being turned off 3 times, Google Play started working But if there's a solution to the bootloop problem I would love to hear it. I searched this forum and the internet and nothing, even though I followed a cyanogenmod wiki's guide.
did you wipe two times before and after flashing cyanogenmod rom
How old is your sd card? because same happened to me. I needed to format my sd card.
Rekesz said:
Yes I did. I used CWM 5.0.2.6. The funny part is that after being turned off 3 times, Google Play started working But if there's a solution to the bootloop problem I would love to hear it. I searched this forum and the internet and nothing, even though I followed a cyanogenmod wiki's guide.
Click to expand...
Click to collapse
Thanked accidentally.
Anyway, tour problem is the CWM you used, didnt u see the DONT USE sign in the version 5.0.2.6 thread? 5.0.2.8 would avoided those errors in flashing custom ROMs
Sent from my GT-S5570 using xda premium
My SD card is as old as my phone, about 9 months old.
No, I didn't see the sign, and to be honest, I didn't even know that there was a 5.0.2.8 version. Do you think it would work with that?
try flash cm7 trough this recovery---->forum.xda-developers.com/showthread.php?t=1342190 i think this in the best cmw........
Rekesz said:
My SD card is as old as my phone, about 9 months old.
No, I didn't see the sign, and to be honest, I didn't even know that there was a 5.0.2.8 version. Do you think it would work with that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1529863 there it is.
I'm sure it works. 5.0.2.6 had some issues as said in the thread, but 5.0.2.8 or 4.0.0.5 works fine. Try it
PM me anything GT-S5570
So I downloaded the new recovery, flashed it via Odin, and now nothing works. When I enter recovery it says that it can't mount /cache/log and /cache/recovery (I think it says these two). I looked around and found that it could be stuck in a bootloop, but luckily Android loads. However, I can't root my phone due to several errors, so I can't install Cyanogen mod. I think I'll give up now But thanks for all the help!
Rekesz said:
So I downloaded the new recovery, flashed it via Odin, and now nothing works. When I enter recovery it says that it can't mount /cache/log and /cache/recovery (I think it says these two). I looked around and found that it could be stuck in a bootloop, but luckily Android loads. However, I can't root my phone due to several errors, so I can't install Cyanogen mod. I think I'll give up now But thanks for all the help!
Click to expand...
Click to collapse
This happens because you are in stock ROM, this errors are normal.If you want ONLY to root your phone you should use stock recovery. Otherwise you can proceed.
PM me anything. GT-S5570
Trublood_ said:
This happens because you are in stock ROM, this errors are normal.If you want ONLY to root your phone you should use stock recovery. Otherwise you can proceed.
PM me anything. GT-S5570
Click to expand...
Click to collapse
Okay. So I flashed the stock ROM back so I can use the stock recovery. Phone rooted-->still getting the same error :/ Sorry for bothering you all so many times, but I just can't understand why this does not work.
Rekesz said:
Okay. So I flashed the stock ROM back so I can use the stock recovery. Phone rooted-->still getting the same error :/ Sorry for bothering you all so many times, but I just can't understand why this does not work.
Click to expand...
Click to collapse
We are here to help you
What error? That one on CWM recovery
PM me anything. GT-S5570
Trublood_ said:
We are here to help you
What error? That one on CWM recovery
PM me anything. GT-S5570
Click to expand...
Click to collapse
Thanks very much Here is what I did step by step:
I returned to the stock recovery by installing the stock firmware. I rooted the phone with stock recovery. Then I installed CWM recovery 5.2.0.8, but I still get the same error in CWM: it can't mount a few things. I still tried installing Cyanogen without wiping, and of course it's stuck at the boot screen with the Android text (I had a feeling that it wouldn't work if the recovery is not fully operational, so I did not want to lose every contact for nothing again). I read that this problem can be solved by formatting the SDCard, so I tried formatting it with PC and the phone also, but nothing. So now I'm back to the stock firmware and recovery with my phone rooted and no idea how to solve any of the problems.
Rekesz said:
Thanks very much Here is what I did step by step:
I returned to the stock recovery by installing the stock firmware. I rooted the phone with stock recovery. Then I installed CWM recovery 5.2.0.8, but I still get the same error in CWM: it can't mount a few things. I still tried installing Cyanogen without wiping, and of course it's stuck at the boot screen with the Android text (I had a feeling that it wouldn't work if the recovery is not fully operational, so I did not want to lose every contact for nothing again). I read that this problem can be solved by formatting the SDCard, so I tried formatting it with PC and the phone also, but nothing. So now I'm back to the stock firmware and recovery with my phone rooted and no idea how to solve any of the problems.
Click to expand...
Click to collapse
Flasging CyanogenMod without wipes? Seriously? Thats exactly why it never worked!! CWM cant mount somethings because you were in stock ROM
Use some backup program to backup contacts, apps, whatever and flash cyanogenmod wiping data and cache before and after.
Sent from my GT-S5570 using xda premium
Rekesz said:
A friend of mine suggested that I try Cyanogenmod, so I decided to flash my Galaxy Mini. The first problem was the bootloop, and no matter how many times I wiped the phone, it was always stuck at the Android text. So I decided to try the Honeycomb mod. Same happened. So I decided to flash it with Android 2.3.6 from sammobile.com. At last, it started working. However, Google Play still sees every application as "installed" (but of course they aren't), and when I try to delete from GP, nothing happens. After trying to install other applications, I realized that I cannot install anything from the market. Any idea how I could solve this problem? I would be very grateful.
Click to expand...
Click to collapse
You Should get gapps for it or you should download .apk for any site........:good:
Thanks Button Ready For You.....:good:
Trublood_ said:
Flasging CyanogenMod without wipes? Seriously? Thats exactly why it never worked!! CWM cant mount somethings because you were in stock ROM
Use some backup program to backup contacts, apps, whatever and flash cyanogenmod wiping data and cache before and after.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
This was just a trial run due to the new CWM recovery. If you read back, I already wrote that I tried wiping both data and cache before and after flashing Cyanogen mod. This "mounting" problem only came up with the new CWM recovery, 5.2.0.8.
The basic Google Apps were all there, since I used a rom from sammobile.com, downloaded programs like poweramp were the ones that did not work.
Rekesz said:
This was just a trial run due to the new CWM recovery. If you read back, I already wrote that I tried wiping both data and cache before and after flashing Cyanogen mod. This "mounting" problem only came up with the new CWM recovery, 5.2.0.8.
The basic Google Apps were all there, since I used a rom from sammobile.com, downloaded programs like poweramp were the ones that did not work.
Click to expand...
Click to collapse
And you tried wipes using 5.2.0.8 version? The mounting problem happened with me only in this recovery too, maybe because it is updated, different or whatever but I flashed and everything was good. Anyway, stay with stock, it seems better for you.
Sent from my GT-S5570 using xda premium
Trublood_ said:
And you tried wipes using 5.2.0.8 version? The mounting problem happened with me only in this recovery too, maybe because it is updated, different or whatever but I flashed and everything was good. Anyway, stay with stock, it seems better for you.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Yes, I guess I will stay with the stock :/ Though I'll try again when a new CWM recovery and a new Cyanogen mod come out.